When the first CSW transfer failed, get_csw function will retry
CSW transfer again, but the return value is not updated.
Change-Id: I289916baa08d0a189d659164a0002347f6f435db
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In interactive payloads, the USB stack's poll procedure is implicitly
called from the UI loop. Since all USB control transfers are handled
synchronously, polling hubs with these slows the UI significantly down.
So switch to interrupt transfers that are done asynchronously and only
perform control transfers when the hub reported a status change.
We use the interrupt endpoint's max packet size instead of the theo-
retical transfer length of `(bNrPorts + 1) / 8` as Linux' code mentions
hubs that return too much data.
Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/18499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
USB 3.1 GEN2 report speed type 4, add into speed enum.
BUG=b:139787920
BRANCH=N/A
TEST=Build libpayload and depthcharge on sarien and boot with
USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We're planning to have a use case with a custom USB device that
implements the USB mass storage protocol on its bulk endpoints, but does
not have the normal MSC class/protocol interface descriptors and does
not support class-specific control requests (Get Max LUN and Bulk-Only
Reset). We'd like to identify/enumerate the device via
usb_generic_create() in our payload but then reuse all the normal MSC
driver code. In order to make that possible, this patch factors a new
usb_msc_force_init() function out of usb_msc_init() which will
initialize an MSC device without checking its descriptors. It also adds
some "quirks" flags that allow devices registered this way to customize
behavior of the MSC stack.
Change-Id: I50392128409cb2a879954f234149a5e3b060a229
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some broken USB mass storage devices send another zero-length packet at
the end of the data part of a transfer if the amount of data was evenly
divisible by the packet size (which is pretty much always the case for
block reads). This packet will get interpreted as the CSW and screw up
the MSC state machine.
This patch works around this issue by retrying the CSW transfer when it
was received as exactly 0 bytes. This is the same mitigation the Linux
kernel uses and harmless for correctly behaving devices. Also tighten
validation of the CSW a little, making sure we verify the length before
we read any fields and checking the signature in addition to the tag.
Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Sometimes the display native orientation does not match the device
default orientation, so allow rotation of the framebuffer before
it is displayed on screen.
set_pixel now take coordinates in the rotated coordinate system,
and converts the coordinates before writing to the framebuffer.
Also, screen.size now matches the rotated system (_not_ the
framebuffer size).
BUG=b:132049716
TEST=Boot krane, see that FW screen is orientation properly.
Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
depthcharge prefers knowing where its input comes from
BUG=b:137378326
BRANCH=none
TEST=ctrl-d / enter to enter dev-mode works now.
Change-Id: I74b5be18c3583be17c73950ced93fad883690090
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
A typo introduced in commit bf2c693f89
made the driver not build: DWC_SLEEP_TIME_US instead of
DWC2_SLEEP_TIME_US.
Change-Id: I197b25fd4f568cce7a4bbcee8cc285b25b26afb1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Keith Short <keithshort@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Increase the timeout for USB requests to 5 seconds for all USB host
controllers.
Prior to this fix, the xCHI driver was detecting false timeouts during
SET ADDRESS requests when nested downstream hubs were connected to the
xHCI root hub.
BUG=b:124730179
BRANCH=sarien
TEST=Build libpayload and depthcharge on sarien/arcada.
TEST=Without change replicate USB set address timeouts in depthcharge
when dock and 4K monitor connected (which includes a total of 4 USB
hubs). With timeout fix, depthcharge boots OS with no USB errors and
the same USB topology. Note that this tests xHCI operation only.
Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
calculate_color() uses the 'fbinfo' global that is initialized by
cbgfx_init(), so we need to run the latter before we can run the former
or we get a null pointer access.
Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
UART RX needs to be re-initialized in libpayload
as it is getting reset at the end of coreboot.
Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Documentation is scarce on the matter, however the related coreboot
code suggests that after the ACK, the keyboard also sends the result
of the self test (passed/failed). It looks like this result is never
consumed here, probably resulting in further confusion for later com-
mands.
Let's revert this for now (if it's not too late for the 4.10 release)
and break things later again. IMHO, due to the fact that there are
dozens of different keyboard controller and keyboard implementations
and no accurate specification followed, such changes should be tested
on a lot of hardware before merge.
This reverts commit a99ed13e33.
This reverts commit 7ae606f57f.
Change-Id: I4d4304d5d8a01e013feac61016c59bcaeea81140
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
CB:32951 ("libpayload: Reset PS/2 keyboard") added a call to reset
keyboard and check the return value of keyboard_cmd() to compare
against I8042_KBCMD_ACK. However, keyboard_cmd() already checks for
ACK and returns 1 or 0 based on whether ACK is received.
This change fixes the check introduced by CB:32951 to compare against
0 just like the other checks for keyboard_cmd(). Additionally, it adds
error messages for all failed commands in keyboard_init() to make the
prints consistent in case of failure.
BUG=b:134366527
TEST=Verified that logs do not contain "ERROR: Keyboard reset failed"
anymore.
Change-Id: Idcadaae12e0a44e404a1d98c6deb633d97058203
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Loading a libpayload based payload like coreinfo or FILO from SeaBIOS or
GRUB pressing keys does not give the expected results.
For example, pressing F1 gives the character 24 translated to scan code
6a. ESC for example 43 (111) in coreinfo loaded from SeaBIOS on QEMU
Q35.
The problem is not reproducible using the payload directly, that means
without SeaBIOS or GRUB. The problem seems to be, that those have already
initialized the PS/2 controller and AT keyboard.
Comparing it with coreboot’s PS/2 keyboard code, the keyboard needs to
be reset. That seems to fix the issue, when the keyboard was initialized
before.
TEST=Build coreboot for QEMU Q35 with SeaBIOS, and coreinfo as secondary
payload. Run
qemu-system-i386 -M q35 -L /dev/shm -bios build/coreboot.rom -serial stdio
press 3 to select the coreinfo payload, and verify that the keys F1 and
F2 are working.
Same with coreinfo loaded from GRUB on the ASRock E350M1.
Change-Id: I2732292ac316d4bc0029ecb5c95fa7d1e7d68947
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Free several resources when AHCI initialization fails. Note that it is
only safe to free resources when the command engine has stopped, since
otherwise they may still be used for DMA.
Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Ctrl-delete does nothing, so it falls through to the default case.
Add a comment to make this explicit.
Found-by: Coverity Scan #1260878
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I4a6f51cb04696b6ebcb554c5667a5bbea58622c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Depthcharge uses the keyboard type to help determine whether
it can trust the keyboard for security-sensitive confirmations.
Currently it trusts anything except usb, but now there's a need
to distrust ec-based ps/2 keyboards that are associated with untrusted
ECs. To help facilitate this, coreboot needs to report more
details about non-usb keyboards, so this change replaces the current
instances of unknown with enum values that distinguish uart and gpio
from ec-based keyboards.
BUG=b:129471321
BRANCH=None
TEST=Local compile and flash to systems with trusted and non-trusted
ECs. Confirmed that security confirmation can't be performed via
keyboard on a system with an untrusted EC but can still be performed
on a system with a trusted EC.
Change-Id: Iee6295dafadf7cb3da98b62f43b0e184b2b69b1e
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about
330 seconds (0xffffffff / 13MHz). Timer and delay functions will not
work properly if the counter overflows. To fix that we should use the
64-bit timer (GPT6).
BUG=b:80501386
BRANCH=none
Test=emerge-elm coreboot; emerge-kukui coreboot
Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
set_option_with() expects a buffer of the exact size of the option.
Change-Id: I21332394f88cf2daa4f733a544627d6d3c6ef26c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The firmware is basically ignoring F11 and F12 without this change.
BUG=b:130143385
TEST=local compile and flash to device. Confirmed that press of F11 and F12
keys now generates appropriate keypress events (and the same codes that
are already generated by these keys on an external USB keyboard).
Signed-off-by: Matt Delco <delco@chromium.org>
Change-Id: Ic43114aa99fc0a1345782c81ed2b90f5569af383
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Cast cpu_khz to a 64 bit integer to prevent possible
integer overflow (the multiplication is currently done
using 32 bit math). Similar to 61dac13 (libpayload:
timer: cast cpu_khz to make sure 64bit math is used).
Found-by: Coverity Scan, CID 1261177
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Iadb0abb7c7cc078f31a6d88d971f5d1b8ac62a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch is a raw application of
find payloads/ -type f | \
xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If a PS/2 AUX device is not present then the AUX test command
during i8042_probe() will time out and add ~500ms to the boot time.
In order to avoid this only test the PS/2 AUX port if
CONFIG_LP_PC_MOUSE is enabled.
BUG=b:126633269
TEST=boot on device without AUX port and check that this command
does not get executed, saving ~500ms at boot.
Change-Id: I2ebdecc66933bd33d320b17aa4608caf4aaf54aa
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If keys are pressed at boot some keyboard controllers will not
properly respond with an ACK to commands, which results in the
keyboard_init function aborting before it adds the keyboard to the
input device list.
This same keyboard controller will manage to properly return keyboard
data when keys are pressed later, so it is possible for it to be
functional in the payload even if it does not respond properly to
every command during initialization.
In order to allow payloads to use the keyboard when this happens a
new Kconfig option is added to ignore the keyboard ACK response and
always add the keyboard to the input device list. This option is
disabled by default and must be enabled by the specific boards that
need it.
BUG=b:126633269
TEST=boot on device with this controller and press keys during boot
and see that the keyboard is still functional in the payload.
Change-Id: Icc6053f99804f1b57d785cb04235b5c4b8d5426f
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
console->scroll_up() was hanging when console->rows is 0. This
was happening on delan if no screen was attached. If there are no
rows, just return.
BUG=b:119234919
TEST=Boot delan with no flat panel. System boots to OS
Change-Id: Ib022d3c6fc0c9cf360809dca28761a50c787304a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This patch removes several timer and serial drivers (and configs) that
were specific to platforms which have been dropped in coreboot.
Change-Id: I589ca7f1a3b479f1c2b1b668a175a71583441ac9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. In this particular
situation, dev->buf is already pointer to u8, and there's no need to convert
to void *.
BUG=b:118484178
TEST=Build libpayload.
Change-Id: Ib70b8ce11abc88c35be4092f097cfff385921f46
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Fill reg_base with physical register base address.
Tested on Lenovo T500.
Change-Id: If42135c8e10b70d5ac9626521abd9cca3cf40053
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18600
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For debugging purposes always set the pciaddr attribute.
Tested on Lenovo T500.
Change-Id: I83a0e7f7196ed251fa0becc4e56bef3ca68f20f4
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18599
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per internal discussion, there's no "ChromiumOS Authors" that's
meaningful outside the Chromium OS project, so change everything to the
contemporary "Google LLC."
While at it, also ensure consistency in the LLC variants (exactly one
trailing period).
"Google Inc" does not need to be touched, so leave them alone.
Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/28756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
BUG=none
TEST=compiled on grunt and made sure USB still works in depthcharge
Change-Id: I972f4604bb5ff3838cb15f323c5a579ad890ecf5
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
If a port disconnects after a reset we should abort any initialization
on the port. This might mean the device has re-enumerated as a 3.0 device
so the hub should be scanned again.
BUG=b:76831439
TEST=Verified USB-C devices that get detected correctly in depthcharge.
Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Make it obvious that the command has failed.
BUG=b:76831439
TEST=Verified on grunt
Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum
is unsigned so this results in a positive value which implies success.
Adding a -1 to the enum will make it signed so the >= 0 check will work
correctly.
BUG=b:76831439
TEST=verified on grunt that -1 is returned when port is disabled.
Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This makes it easier to know what offset each register references.
BUG=b:76831439
TEST=none
Change-Id: I92dcbd463ceb4dd8edbbd97b51a4e9aa32a983a6
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/27474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This change ensures that keyboard scanning is disabled and keyboard is
set to default state while disconnecting the keyboard. This is
required to ensure that the controller doesn't keep scanning and
buffering keystrokes which could lead to OS drivers reading stale
data.
BUG=b:110024487
TEST=Verified that kernel driver is able to probe correctly even if
multiple keys are pressed during handoff from payload to OS.
Change-Id: I1ffb8904d545284454c1825ee2e7c0087fc13762
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add function to get active keyboard modifiers.
Change-Id: Ifc7bd4aa86f20d67c5b542d0458b966e605c5499
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18601
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new method to retrieve active usb keyboard modifiers.
Change-Id: Ief6679ce782b58b9ced207f4f27504fb2a517b76
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18602
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
keyboard_disconnect was called without keyboard_init being called and in this
case keyboard_havechar returns true because i8042_data_ready_ps2 is
dereferencing uninitialized variable ps2_fifo from within fifo_is_empty causing
keyboard_disconnect to be stuck in this while loop.
while (keyboard_havechar())
keyboard_getchar();
BUG=b:80299098
TEST=Check if the normal mode path in depthcharge is not causing a hang
Change-Id: I944b4836005c887a2715717dff2df1b5a220818e
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/26590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Make use of i8042 driver to add PS2 mouse driver support.
Tested on Lenovot T500.
The touchpad can be used to drive the mouse cursor.
Change-Id: I4be9c74467596b94d64dfa510824d8722108fe9c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Make use of i8042 driver in keyboard.c.
Required to add PS/2 mouse support.
Tested on Lenovo T500.
Change-Id: If60b5ed922b8fc4b552d0bfd9fe20c0fd6c776bf
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18596
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a common i8042 driver that uses multiple overflowing
fifos to seperate PS/2 port and PS/2 aux port.
Required to support PC keyboard and PC mouse at the same time.
Tested on Lenovo T500.
Change-Id: I4ca803bfa3ed45111776eef1f4dccd3fab02ea39
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/18594
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The USBHID driver zero-initializes some but not all of the fields in its
usbhid_inst_t structure. This is a problem because under some
circumstances, some of the uninitialized fields may be read and lead to
incorrect behavior. Some (broken) USB keyboards keep sending reports
that contain all zeroes even when they have no new keys... these usually
get silently ignored, but if the usbhid_inst_t structure is in an
inconsistent state where 'previous' is zeroed out but 'lastkeypress'
is non-zero because it wasn't properly initialized, these reports will
be interpreted as keyrepeats of the bogus 'lastkeypress'. This patch
changes the code to just xzalloc() the whole structure so we won't have
to worry about initialization issues anymore.
Change-Id: Ic987de2daaceaad2ae401a1e12b1bee397f802ee
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/23766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Make is so that a different timer source can be provided instead
of TSC on x86 platforms.
BUG=b:72378235,b:72170796
Change-Id: I6faeecf7624a5aa4e1af8862036f1fbd2f54eb51
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/23435
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
libpayload needs a static copy of the out of line function
`font_glyph_filled()` in every TU that needs it. So make it static
inline.
This fixes a build error by gcc (Debian 7.1.0-12) 7.1.0 from Debian
Sid/unstable. This happens with any libpayload based payload like
coreinfo, nvramcui or tint.
```
[…]
LPCC build/coreinfo.elf (LINK)
/src/coreboot/payloads/coreinfo/build/libpayload/bin/../lib/libpayload.a(corebootfb.libc.o): In function `corebootfb_putchar':
/src/coreboot/payloads/libpayload/drivers/video/corebootfb.c:173: undefined reference to `font_glyph_filled'
[…]
```
Change-Id: I931f0f17b33abafdc49aa755a0dad65e28820750
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/20897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This introduces support for font scaling with a factor provided via
Kconfig. In practice, the font itself is not scaled at any point in
memory and only the logic to determine whether a pixel should be filled
or not is changed.
Thus, it should not significantly impact either the access time or
memory use.
Change-Id: Idff210617c9ec08c6034aef107cfdb34c7cdf029
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/20709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This introduces helpers for accessing the included font, instead of
using hardcoded values provided by the font's header itself.
It will allow painlessly adding support for font scaling in a subsequent
change. It should not introduce any functionality change.
Change-Id: I0277984ec01f49dc51bfc8237ef806f13e3547e2
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/20708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
AHCI spec explicitly states that we may poll.
TEST=Ran FILO on kontron/bsl6 and observed that the controller
always becomes ready during the first delay.
Change-Id: If34694abff14d719d10d89bc6771dbfa12065071
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This is (thankfully) not done by coreboot any more for recent chipsets.
Change-Id: If56e38037f7b1e53871ee63e6ff297028c59d493
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
If the framebuffer address is zero the corebootfb_init() function
should abort and not attempt to use it for video, otherwise it
will likely hang.
This was tested by booting on a board that does not have a display
attached and includes the previous patch to zero the framebuffer
structure in the coreboot tables.
Change-Id: I53ca2e947a7915cebb31b51e11ac6c310d9d6c55
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Instead of storing inverted-colored bitmaps,
invert drawing of text bitmap on the fly by adding
an invert parameter down to libpayload. Merging
pivot and invert fields into flags field.
BUG=b:35585623
BRANCH=None
TEST=Make sure compiles successfully
CQ-DEPEND=CL:506453
Change-Id: Ide6893a26f19eb2490377d4d53366ad145a9e6e3
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/19698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
cbgfx currently does not support portrait screen which height >width.
so add it.
Change-Id: I66fee6d73654e736a2db4a3d191f030c52a23e0d
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-on: https://review.coreboot.org/19474
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch allows the CBMEM console to persist across reboots, which
should greatly help post factum debugging of issues involving multiple
reboots. In order to prevent the console from filling up, it will
instead operate as a ring buffer that continues to evict the oldest
lines once full. (This means that if even a single boot doesn't fit into
the buffer, we will now drop the oldest lines whereas previous code
would've dropped the newest lines instead.)
The console control structure is modified in a sorta
backwards-compatible way, so that new readers can continue to work with
old console buffers and vice versa. When an old reader reads a new
buffer that has already once overflowed (i.e. is operating in true ring
buffer mode) it will print lines out of order, but it will at least
still print out the whole console content and not do any illegal memory
accesses (assuming it correctly implemented cursor overflow as it was
already possible before this patch).
BUG=chromium:651966
TEST=Rebooted and confirmed output repeatedly on a Kevin and a Falco.
Also confirmed correct behavior across suspend/resume for the latter.
Change-Id: Ifcbf59d58e1ad20995b98d111c4647281fbb45ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When console input driver registers itself, perform flush of input
buffer to avoid interpreting any stale key presses before libpayload
is run.
keyboard.c: Remove the redundant buffer flush.
8250.c: Ensure that serial_hardware_is_present is set before call to
add input driver.
BUG=b:37273808
TEST=Verified that any key presses in serial console before payload is
up do not have any effect after the payload starts running.
Change-Id: I46f1b6715ccf6418f5b2c741bf90db2ece26a60d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19345
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CBGFX currently doesn't support portrait screens at all. This will have
to be fixed eventually but might take a bit of effort. As a first step
to make devices with a portrait panel somewhat usable, this patch will
just force a square canvas on these panels and keep the bottom part of
the screen black.
Also switch set_pixel to calculate framebuffer position via
bytes_per_line instead of x_resolution. This is supposed to be the
canonical way to do that and may differ in cases where the display
controller requires a certain alignment from framebuffer lines.
Change-Id: I47dd3bf95ab8a7d8b7e1913e0ddab346eedd46f1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19279
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
We have found a non-compliant USB hub (RealTek RTS 5413) that does not
set a port's Connect Status Change bit on its USB 3.0 half if the port
had already been connected while the hub was being reset. To work around
this bug, this patch adds code to initially request the status of every
port after a hub was enumerated, clear the Connect Status Change bit if
set, and then enumerate the port iff it is currently connected,
regardless of whether the change bit was set. A similar behavior can
also be found in the Linux kernel.
BRANCH=oak
BUG=b:35929438
TEST=Booted Elm with this change, my USB 3.0 sticks enumerate now even
if they had been plugged in since boot.
Change-Id: I8a28252eb94f005f04866d06e4fc61ea265cee89
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18729
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Power button events are usually dropped because the button is not in
the keyboard matrix range. Add condition to forward it like other keys.
BUG=chrome-os-partner:61275
BRANCH=None
TEST=reboot and make sure power button selection
in depthcharge's detachable menus is processed on reef.
Change-Id: I86897fa8d73a56533ef62bba05458ac3d339237e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 25654e214f0ab8685d445ced62612a02be851126
Original-Change-Id: I516a0043bd7730789728d5c5498d0a0f30a2acac
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/428199
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://review.coreboot.org/18177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Currently we just disabled ohci interrupts when calling ohci_shutdown,
Which would not actually shutdown the ohci controller, for example it
may still written the increased HccaFrameNumber to Hcca buffer.
Perform a soft reset to ohci controller as the linux kernel ohci-hcd
driver does.
BUG=chrome-os-partner:60996
BRANCH=None
TEST=Checked on gru, no more "BUG: Bad page state" error in kernel.
Change-Id: I128ab6ba455ac5383a4d48be0bc12b8bb4533464
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4749fc82fdd1b74ca3f2ed3fdf0ef53a5e161087
Original-Change-Id: I3f192aea627ba2fa69533bc0a4270466ca18f2a7
Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/426338
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/18125
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This fixes the generic timer driver to get the current tick from the
high register, so that comparison with the high count value (obtained
previously from the same register) has a chance to succeed.
Change-Id: I5ce02bfa15a91ad34641b8e24813a5b7ca790ec3
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/17929
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Coverity considers this a copy&paste error, and maybe it is. In any
case, it makes sense to check the variable that (if the condition is
true) is changed, and the values are the same before that test, so the
change is harmless.
Change-Id: I163c6a9f5baa05e715861dc19643b19a9c79c883
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347376
Reviewed-on: https://review.coreboot.org/17837
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Chrome OS builds always have some inherent differences to "standard"
libpayload configurations: they don't want to use curses or things like
storage drivers, they always use the coreboot framebuffer and USB, etc.
This patch reintroduces CONFIG_LP_CHROMEOS as an option that only
affects Kconfig defaults. This allows Chrome OS builds to select most of
what they need in one go and reduces board-specific .config files to
only the options that are really specific to that board.
Also restricts the 8250_SERIAL_CONSOLE Kconfig to only default to yes on
x86 boards, which probably makes sense for all of libpayload (some but
far from all ARM boards use 8250-compatible UARTs, and we should
probably not default a platform option unless it's going to be correct
with very high probability).
BRANCH=None
BUG=None
TEST=Built and booted Jerry and Oak.
Change-Id: Ie0c0593ffd399608d2cbfb83d20891f6f1864914
Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Id: e558f59
Original-Change-Id: I609637cd2ea7dfb4558aa3c04c90b64038c9ab57
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/347970
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17024
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Currently every non-x86 platform supported by libpayload needs to
provide its own timer driver. Most of the ones we have accumulated there
look almost identical: For the frequency, return a preset constant. For
the value, read a 32-bit register, possibly read another 32-bit register
and shift+OR it with the previous one, then return that.
Let's replace this with a single .c file that can easily handle all of
those cases. Menuconfig convenience can still be maintained by providing
several presets that select different defaults for the driver's
configuration options (register address(es) and frequency).
Removes an "enabled" check from Samsung MCT driver since coreboot always
unconditionally enables that timer anyway.
CQ-DEPEND=CL:344809
BRANCH=None
BUG=None
TEST=Booted Oak and Veyron, observed how dev-mode delay was still ~30s
Change-Id: I61cb7d2ffd4902aa841c57f9afa9cd991f770acd
Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Id: a036af6
Original-Change-Id: I9784e7c6aa5abd6d92478ea7ec1cf42c9a437546
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/347749
Reviewed-on: https://review.coreboot.org/17023
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
All but ga-g41m-es2l/cmos.default had multiple final newlines.
ga-g41m-es2l/cmos.default had no final newline.
Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16361
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Antonello Dettori <dev@dettori.io>
Move the configuration of the timer, storage and USB drivers from the
main Kconfig to three separate ones stored in the respective
directories.
This reduces the LOC of Kconfig and makes it more manageable.
Change-Id: I0786dbc1d5d8317c8ccb600f5de9ef4a8243d035
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15914
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
cbgfx currently makes a separate function call (recomputing some values)
for every single pixel it draws. While we mostly don't care that much
about display speed, this can become an issue if you're trying to paint
the whole screen white on a lowly-clocked Cortex-A53. As a simple
solution for these extreme cases, we can build a fast path into
clear_screen() that just memset()s the whole framebuffer if the color
and pixel format allow it.
BUG=chrome-os-partner:54416
TEST=Screen drawing speed on Kevin visibly improves (from 2.5s to 3ms).
Change-Id: I22f032afbb86b96fa5a0cbbdce8526a905c67b58
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15524
Tested-by: build bot (Jenkins)
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. Make the xHCI driver to support xHCI controller v1.1
2. And a new function xhci_ring_doorbell(), it aims to
add a memory barrier before ringing the doorbell, to ensure
all TRB changes are written to memory.
BRANCH=none
BUG=chrome-os-partner:52684
TEST=boot from USB on Kevin rk3399 platform
Change-Id: Ife1070d1265476d0f5b88e2acf3299fc84af5832
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0c21e92
Original-Change-Id: I4e38e04dc3c7d32ee4bb424a473c70956a3c3ea9
Original-Signed-off-by: Liangfeng Wu <wulf@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/346831
Original-Commit-Ready: Brian Norris <briannorris@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15111
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ibf2c91be93e2567cc1262b6fb84461eef51ab3e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b87157138302b017e64a28417a22421c880c1bcb
Original-Change-Id: I16a8324d3c8ef4ee729f4509fda5bfe703b24ce4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333304
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14656
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:49249
TEST=Compiles and boots and detect USB storage
BRANCH=none
Change-Id: I9007399e1f785e6f1d2258225e3f7cc602053aed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1db43f53973d2124e41186777caa829aa346ace3
Original-Change-Id: I943d19a3a7d785bd075073b57ba6388662d7df90
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333311
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14659
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There is a lot of generic code in the 8250 driver that should
be available for non-8250 systems with serial ports as well.
Change-Id: I67fcb12b5fa99ae0047b3cbf1815043d3919437e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This fixes serial on rk3288.
Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13636
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The more generic 8250 driver can handle both port-mapped and memory-
mapped 8250-compatible UARTs, with different register sizes. Thus, a
separate driver for MMIO32 is not needed.
The generic 8250 driver was tested to work for both output and input,
on Apollolake SoC, which only presents an MMIO32 UART.
Change-Id: Idab766588ddd097649a37de92394b0078ecc660a
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/12524
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
during shutdown
DWC2 UDC controller always requires an active packet to be present in
EP0-OUT to ensure proper operation of control plane. Thus, during
shutdown ignore EP0-OUT for queue empty check if only 1 packet is
present.
BUG=b:24676003
BRANCH=None
TEST=Compiles successfully. "fastboot reboot-bootloader" reboots
device without timeout in udc shutdown.
Change-Id: Iafe46c80f58c4cd57f8d58f060d805b603506bbd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4e7c27d849c0411aae58e60a24d8170a27ab8485
Original-Change-Id: Ifa493ce0e41964ee7ca8bb3a1f4bb8726fa11173
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/311257
Original-Commit-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12413
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Existing Intel xHCI controllers require a delay of 1 ms,
after setting the CMD_RESET bit in command register, before
accessing any HC registers. This allows the HC to complete
the reset operation and be ready for HC register access.
Without this delay, the subsequent HC register access,
may result in a system hang, very rarely.
Verified CherryView / Braswell platforms go through over
1000 warm reboot cycles (which was not possible without
this patch), without any xHCI reset hang in depthcharge.
BRANCH=None
BUG=None
TEST=Verified CherryView / Braswell platforms go through
over 1000 warm reboot cycles, without any xHCI reset hang
in depthcharge.
Change-Id: I8eff5115ca52738bdcf8bc65fbfb2a5f60a0abe1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3e7ea70df36e3bf35a6ee1297640900ee76bfdac
Original-Change-Id: Id681a19d0eedb0e2c29e259c5467bcde577e3460
Original-Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310022
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12325
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
enqueue_packet already runs start_ep_transfer, which enqueues the next
job. It's pretty much guaranteed that the port will look busy.
BUG=none
BRANCH=none
TEST=no spurious ep 0-0 busy messages
Change-Id: I9cbfa7b51dd37564262295ddbcdd0755da40c05b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8997dbd78dc363334f4e22eaa61f25de1449ffba
Original-Change-Id: I8a39713fc1d6f16b80284e0f21dc95685716a9b7
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308763
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/12259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
hexdump() now takes a pointer instead of an int-containing-an-address.
BUG=none
BRANCH=none
TEST=building with USB_DEBUG works
Change-Id: Idd0c43031a212c8f3b6489f533c488805d98d6a9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8660f6091bb124eeabe73302e8c7f1a8e46324f1
Original-Change-Id: I266efcb8b939d6da104ad05a3e79a78065c60beb
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308762
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/12258
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
We found that some SanDisk Cruizer Glide CZ60 sticks (confirmed on 16GB
and 64GB versions) have a problem responding to our first GET_MAX_LUNS
request right after they received their SET_CONFIGURATION. They will
continually return a NAK until the host gives up (which is 2
user-noticable seconds for us). Adding a small delay of about 15us seems
to be enough to fix the issue, but let's do 50 to be save.
Confirmed with both MT8173 and Intel LynxPoint XHCI controllers.
BRANCH=None
BUG=chrome-os-partner:45473
TEST=No notable delay before detecting stick on Oak and Falco.
Change-Id: Ib03944d6484de0ccecbb9922d22666f54c9d53dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 589f19a901275fb8b00de4595763a7d577bed524
Original-Change-Id: I95c79fe40d3ad79f37ce2eb586836e5de55be454
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/308980
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/12229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change Ie54699162 changed a structure's name and field names and we
didn't notice. Adapt.
BUG=none
BRANCH=none
TEST=building with UDC_DWC2 works
Change-Id: I592ebc29b2a08a23e6dbc9d2186807cbbbbca330
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3dda8ad5ffc36593d8b8fd6664a7f9b4816f0f93
Original-Change-Id: I4a065de0f4045a01bef1dc9fbb2e0578b5508518
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/308791
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/12228
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
get_image_dimension returns the width or height of the image projected on
canvas.
This is necessary for example when two images of different lengths have to
be placed side by side in the center of the canvas and the widths of the
images must be adjusted according to the height.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Samus
Change-Id: I119c83891f48046e888b6b526e63348e74f8b77c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: d1a97f0492eb02f906feb5b879b7b43518dfa4d7
Original-Change-Id: Ie13f7994d639ea1556f73690b6b6b413ae64223c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304113
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11929
Tested-by: build bot (Jenkins)
This change makes the code in graphics.c more descriptive and readable.
Especially, it makes expressions for scale calculation look what they
are meant to do. It also includes:
- Rename variables (struct fraction, dim_org, etc.) for more consistency
- Add more input validation (div-by-zero, etc.)
BUG=chromium:502066
BRANCH=master
TEST=Tested on Samus
CQ-DEPEND=CL:304860
Change-Id: I2694912bb7b6017d5655de2fd655b95432addb22
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 0863dc3ee925d3a05c83c66397b19a57f5478ef3
Original-Change-Id: Id8e349b8e09082fb84c3e1a984617f916e16c518
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/304861
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11928
Tested-by: build bot (Jenkins)
This change adds 'pivot' option to draw_bitmap. It controls the point of the
image based on which the image is positioned. For example, if a pivot is set
to the center of the image horizontally and vertically, the image is
positioned using pos_rel as the center of the image.
This feature is necessary, for example, to place a text image in the center
of the screen because each image has a different width depending on the
language.
This change also makes draw_bitmap accept both horizontal and vertical size.
If either of them is zero, the other non-zero value is used to derive the
size to keep the aspect ratio.
Specifying the height is necessary to keep font sizes the same when drawing
text images of different lengths.
draw_bitmap_direct is a variant of draw_bitmap and it draws an image using
a native coordinate and the original size (as opposed to the location and
the size relative to the canvas).
CL:303074 has real use cases.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I5fde69fcb5cc9dc53e827dd9fcf001a0a32748d4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 82a0a8b60808410652552ed3a888937724111584
Original-Change-Id: I0b0d9113ebecf14e8c70de7a3562b215f69f2d4c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302855
Reviewed-on: http://review.coreboot.org/11927
Tested-by: build bot (Jenkins)
This change replaces the current scaling algorithm (nearest neighbor) used
for bitmap rendering with the bilinear interpolation, which has much better
reproduction.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I02520883debb7db40ffc19d4480244e0acabc818
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 764b383c1763a022728f2b2d9fb90e27c9e32e94
Original-Change-Id: I0ddd184343428904d04d8a76fe18a885529c7d3d
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302195
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/11926
Tested-by: build bot (Jenkins)
This change adds load_bitmap API, which loads a bitmap file from cbfs
and returns a pointer to the image data.
BUG=none
BRANCH=tot
TEST=Tested on Samus
Change-Id: I7d7874f6f68c414dc877a012ad96c393e42dc35e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 9d33e713a0cf6bd1365418dad989e47e86db01e4
Original-Change-Id: Idbf9682c2fa9df3f0bd296ca47edd02cd09cfd01
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302194
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/11925
Tested-by: build bot (Jenkins)
This change allows draw_bitmap to draw an image outside the canvas
with the original size if the scale parameter is zero. This is used
for example when drawing a splash screen which has to be positioned
at a pixel perfect location.
BUG=none
BRANCH=master
TEST=Draw pictures and boxes on Samus and Ryu
Change-Id: Ia2d8799184d1aa192e2c50850e248bee8f234006
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 45d4717fe5c3e3554bd79b63ade490d88cf00bbe
Original-Change-Id: I48aa21122cfc2ee43bcb1b8f87b00c66abdc230e
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295961
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11923
Tested-by: build bot (Jenkins)
draw_bitmap renders a bitmap image on screen with position and sizes
scaled relative to the screen. images are scaled up or down by nearest
neighbor interpolation.
BUG=chrome-os-partner:43444
BRANCH=tot
TEST=drew bitmap images on Samus
Change-Id: Ib599acc85b25626a6aed1fa9884ecd8e169bb860
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c910c9cdb7efc53aace067bd081aeefc07556811
Original-Reviewed-on: https://chromium-review.googlesource.com/290302
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Change-Id: Ib599acc85b25626a6aed1fa9884ecd8e169bb860
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295532
Reviewed-on: http://review.coreboot.org/11584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change introduces cbgfx, a graphics library, which provides APIs for
drawing basic shapes, texts, graphic data, etc. on a screen.
BUG=chrome-os-partner:43444
BRANCH=tot
TEST=Drew boxes by draw command of depthcharge cli on Samus
Change-Id: I6019e5998e65dca3ab4785a90669b5db02463d2e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 5b3ebce8eae91be742e4f977d3407d24e1537580
Original-Reviewed-on: https://chromium-review.googlesource.com/290301
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Change-Id: I10db27715cb907bdc451a33ed99d257e3af241b7
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291065
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11408
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Certain Lexar USB disks may fail during the first calls to
get_descriptor(..., DT_CFG, ...) for unknown reasons. Therefore, make
several attempts before giving up.
BUG=chromium:466758
TEST=Manual on Samus. Go to recovery mode, verify that Lexar LJDS70 USB
stick is bootable.
BRANCH=None
Change-Id: I476ac22f9c4f844c60ebc6e53af8c144d70bb9d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93a0570b343479dd22506ad4d7961f0ea4251f8c
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: Ie581c7c71c53816065c7f59202581888a79e445e
Original-Reviewed-on: https://chromium-review.googlesource.com/302403
Original-Commit-Ready: Shawn N <shawnn@chromium.org>
Original-Tested-by: Shawn N <shawnn@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12133
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If the device has already been disconnected then we shouldn't enable
host channel to start any transfer, otherwise this channel goes into
an odd state the channel is enabled but can not be disabled by set
hcchar.chdis=1. So we need check the device connect status before
enable channel.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=None
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae3e690b2cd4a9ea8b5766ac873b0e00bf3a23de
Original-Change-Id: Ib3ecf486649ca11b302144f9c00a5e88424e90fa
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/298402
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit ea96f947b5304fdde2e0991d23febaeba209dde1)
Original-Reviewed-on: https://chromium-review.googlesource.com/299398
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Idf48ffbc4c2794900e09dec6b2e34e33b21f87b4
Reviewed-on: http://review.coreboot.org/11662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When disconnect is detected in dwc2_split_transfer() the split
configuration registers should be cleared before return.
BRANCH=None
BUG=chrome-os-partner:44534
TEST=On Jerry, usb hot plug works with devices behind hubs
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37594d8b4490b6d393d19d17d8e497db7de8817d
Original-Change-Id: Ie1eecec067305874513c6ceb95df4240dc393cd6
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295625
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d543e14cdc73bd549dd553c8d1d07672a1307981)
Original-Reviewed-on: https://chromium-review.googlesource.com/299700
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4604097743f2f9d763b29ee27f3bc1788a85a62
Reviewed-on: http://review.coreboot.org/11661
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Wished I hadn't seen that. Git saw the conflict (file was gone), both
committer and reviewer thought it would be a good idea to re-add it as
dead code (see 558e9b5: libpayload: Add minimal support for PL011 UART).
Change-Id: Ifea8113fbc59e0463eaedb86b976f54ec11113a9
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/11604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This change allows video_printf to left/center/right-align text depending on
the enum value provided by the caller. This is useful especially because usually
the length of formatted string is unknown before calling video_printf.
BUG=none
BRANCH=smaug
TEST=drew fastboot screens on Smaug
CQ-DEPEND=CL:296460
Reviewed-on: https://chromium-review.googlesource.com/292929
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 436f05f60c1b88626740a35913e3ad37b5c777a3)
Change-Id: If1d50b7d8ddaa86eddc1618946756184cb87bfe1
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/295413
Reviewed-on: http://review.coreboot.org/11583
Tested-by: build bot (Jenkins)
Seems like our transferred bytes calculation for OUT transfers that span
more than one packet had been wrong, and we just got lucky that we never
noticed it before. The HCTSIZ.xfersize register field we're reading only
counts bytes transferred by the last packet we sent.
OUT endpoints cannot have short transfers -- every transfer should
either finish all bytes we wanted to send or end in a proper error
condition. Therefore, in the absence of an error we can just conclude
that all input bytes have been transferred.
BRANCH=veyron
BUG=chrome-os-partner:35525
TEST=SMSC95xx netboot on Jerry now works.
Change-Id: I57349e697c428df6b56e2f6f62e87652ef1e7a94
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 0abee13b6d89dec12c6fff581ece1836393c7703
Original-Change-Id: Id0a127e6919f5786ba05218277705dda1067b8c3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293956
Original-Reviewed-by: yunzhi li <lyz@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11404
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Check device connect status while waiting for usb transfer complete
Avoid coreboot get stuck when usb device unplugged
BUG=chrome-os-partner:35525
TEST=None
BRANCH=None
Original-Change-Id: Id103501aa0d8b31b0b81bef773679c0fad79f689
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292630
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292966
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Change-Id: I49396b74131dbfda505d9d3de5adbdc87eb92ce1
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/11236
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The xhci_rh_port_status_changed() function tries to always clear all
port status bits, even though most of them don't interest us. This is
generally a smart thing to do since not clearing a status bit may cause
the controller to not generate any more Port Status Change Events.
However, the bitmask we currently use doesn't cover bit 23 (Port Config
Error Change) and instead covers bit 16 (Port Link State Write Strobe)
which is not really related to this and not a W1C bit. Probably a typo,
so let's fix that.
BRANCH=None
BUG=None
TEST=Plugged/unplugged a bunch of USB devices on an XHCI Falco.
Original-Change-Id: Ia83f5b72cce094859c0f0e730752d7b5cfa6e1c6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291842
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I11f5fe38cb70055daf6e866a8ee84ca80488e3bf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11194
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The 1.1 revision of the XHCI specification added an extra 5 bits to the
Max Scratchpad Bufs field of HCSPARAMS2 that newer controllers make use
of. Not honoring these bits means we're not allocating as many
scratchpad buffers as the controller expects, which means it will
interpret some uninitialized values from the end of the pointer array as
scratchpad buffer pointers, which obviously doesn't end well. Let's fix
that.
BRANCH=none
BUG=chrome-os-partner:42279
TEST=Makes a USB-related memory corruption issue disappear.
Original-Change-Id: I7c907492339262bda31cdd2b5c0b588de7df8544
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291681
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iba1007bfebffe1f564f78bb875fff9ba0fe11a38
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11189
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If short packet detected, stop this transfer and return the actual
transferred size
BUG=chrome-os-partner:42817
TEST=Netboot could run well
BRANCH=None
Original-Change-Id: Icb4317f48aa04ac15bb1886b81d2e3c472d123d0
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/288215
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-(cherry picked from commit d372343b4e3d664ce2d76dbf55a5061b5d496bba)
Original-Reviewed-on: https://chromium-review.googlesource.com/291064
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Change-Id: I43d9edffe2074c037f2df203621863e54d2597fa
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Reviewed-on: http://review.coreboot.org/11187
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch re-adds a few fixes that originally went into the
chromeos-2013.04 tree. I kinda seem to have slipped them into the
backport of Nico's original XHCI patch (crosreview.com/168097) instead
of making a new change, which was not very clever and caused them to be
forgotten in the later upstreaming wave.
Changing internal XHCI error numbers is just a cosmetic change to make
them uniquely identifyable in debug output. Bumping the timeout to 3
seconds is an actually important fix since we have seen mass storage
devices needing that much in the past.
BRANCH=None
BUG=None
TEST=Diffed payloads/libpayload/drivers/usb between chromeos-2013.04 and
chromeos-2015.07, confirmed that no serious differences remain.
Original-Change-Id: I03d865dbe536072d23374a49a0136e9f28568f8e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290423
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I5d773d3a23683fb2164916cc046f4a711b8d259e
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11178
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Before the controller's destroy_device() could interrogate
the usbdev_t object usb_detach_device() was freeing and
NULLing out the pointer. That results in all callers who
needed that object to start accessing random bits of memory.
This eventually led into free()ing memory it shouldn't which
corrupted the allocator's state. Eventually, all forward
progress was lost by way of a single ended linked list
turning into a circular list.
The culprit seems to be a bad merge in commit e00ba21.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Can boot into OS now w/o "hanging" on glados.
Original-Change-Id: I86dcaa1dbaf112ac6782e90dad40f0932f273a1f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290048
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I9135eb0f798bf7dbeccc7a033c3f8471720a0de5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11173
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some FSF addresses found their way back into our tree.
Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11145
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds support for the SuperSpeed half of USB 3.0 hubs, which
previously prevented SuperSpeed devices behind those hubs from working.
BRANCH=None
BUG=chrome-os-partner:39877
TEST=Played around with multiple hubs and devices on Oak and Falco, can
no longer find a combination that doesn't work.
Change-Id: I20815be95769e33d399b7ad91c3020687234e059
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3db96ece20d2304e7f6f6aa333cf114037c48a3e
Original-Change-Id: I2dd6c9c3607a24a7d78c308911e3d254d5f8d91d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/284577
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: chunfeng yun <chunfeng.yun@mediatek.com>
Reviewed-on: http://review.coreboot.org/10958
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have been trying to avoid reassigning previously used USB addresses
to different devices since CL:197420, because some devices seem to take
issue with that. Unfortunately, that patch doesn't affect XHCI: those
controllers insist on chosing addresses on their own. The only way to
prevent them from reusing a previously assigned address is to not
disable that slot at all.
This patch implements address reuse avoidance on XHCI by not disabling
slots when a device is detatched (which may occur both on physical
detachment or if we simply couldn't find a driver for that device).
Instead, we just release as many resources as we can for detached
devices (by dropping all endpoint contexts) and defer the final cleanup
until the point where the controller actually runs out of resources (a
point that we probably don't often reach in most firmware scenarios).
BRANCH=none
BUG=chrome-os-partner:42181
TEST=Booted an Oak plugged into a Servo without having a driver for the
SMSC network chip, observed that it could still enumerate the next
device afterwards. Kept unplugging/replugging stuff until the cleanup
triggered and made sure the controller still worked after that. Also
played around a bit on a Falco without issues.
Change-Id: Idfbab39abbc5bc5eff822bedf9c8d5bd4cad8cd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 88c6bcbc41156729c3c38937c8a4adebc66f1ccb
Original-Change-Id: I0653a4f6a02c02498210a70ffdda9d986592813b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/284175
Original-Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10957
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With split transaction, dwc2 host controller can handle full- and
low-speed devices on hub in high-speed mode. This commit adds support
for split control and interrupt transfers
BUG=None
TEST=Connect usb keyboard through hub, usb keyboard can work
BRANCH=None
Change-Id: If7a00db21c8ad4c635f39581382b877603075d1a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fb514b7f7f7e414fa94bfce05420957b1c57019
Original-Change-Id: I07e64064c6182d33905ae4efb13712645de7cf93
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283282
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10956
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
dwc2 host core do not have a periodic schedule list, so try to send
an interrupt packet in poll_intr_queue() function and use frame
number read from usb core register to calculate time and schedule
transfers.
BUG=None
TEST=Tested on RK3288 with two USB keyboards(connect to SoC without
USB hub), both work correctly.
BRANCH=None
Change-Id: I16f7977c45a84b37c32b7c495ca78ad76be9f0ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3d0206b86634bcfdbe03da3e2c8adf186470e157
Original-Change-Id: Ie54699162ef799f4d3d2a0abf850dbeb62417777
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/280750
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10774
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add force_shutdown() routine for dwc2 udc driver to support
disconnect and reconnect case when fastboot receiving data.
BUG=chrome-os-partner:41687
BRANCH=None
TEST=None
Change-Id: I9ec204d8b7088cfafd3164c9779a6fd85d379dba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9238f87c065ba8a57bfb4a7e65fd1821ff2922f9
Original-Change-Id: I1e584aaf19efa14409bdfa26039c27fa7034b5f0
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281130
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Commit-Queue: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10770
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This will make the code work with the different styles
of Kconfig (emit unset bools vs don't emit unset bools)
Roughly, the patch does this, and a little bit of fixing up:
perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]`
perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]`
Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10711
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The macros of VT100_CURSOR_ON and VT100_CURSOR_OFF are exchanged
Change-Id: Ifdae186ae0503a915d695a9e3fd24bdf65d8428a
Signed-off-by: House Chou <hoare.tw@gmail.com>
Reviewed-on: http://review.coreboot.org/10718
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Found in rockchips rk3288 as used in google/veyron.
BUG=None
TEST=None
BRANCH=None
Change-Id: I2f2c36c5bea3986a8a37f84c75608b838a8782ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59a0bcd97e8d0f5ce5ac1301910e11b01e2d24b1
Original-Change-Id: Ic89ed54c48d6f9ce125a93caf96471abc6e8cd9d
Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272108
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10689
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow force shutdown operation of the connection in case where the
cable is disconnected and reconnected back.
BUG=chrome-os-partner:41687
BRANCH=None
TEST=Compiles successfully and fastboot works fine even with
reconnection of cable
Change-Id: I8eb1217b4a9ad6ce8a2a40db329eca1930eda089
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3d7ab65c459caa4ec526b99a1aee1a31e9cb80da
Original-Change-Id: I354c44e0ed2211cb2c4c1ae653d201b7d15ea932
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281066
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10686
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
They're ASCII only, with only one language at a time,
but they should be good enough to report device names and
serial numbers.
BUG=none
BRANCH=none
TEST=with depthcharge CL, check dmesg on the host device
Change-Id: If888e05b2f372f7f0f43fadb108ca7ef4ed3b7c1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f0bc4242057d3edc4f4796ebeed2d98d89d60a1d
Original-Change-Id: Ibe42f1b49f412e5482cebb7ebe20f6034352fd12
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/278300
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10626
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
1. There is a mis-understanding to calculate the value of TD Size
in Normal TRB. For MTK's xHCI controller it defines a number of
packets that remain to be transferred for a TD after processing
all Max packets in all previous TRBs, that means don't include the
current TRB's.
2. To minimize the scheduling effort for synchronous endpoints in xHC,
the MTK architecture defines some extra SW scheduling parameters for
HW. According to these parameters provided by SW, the xHC can easily
decide whether a synchronous endpoint should be scheduled in a specific
uFrame. The extra SW scheduling parameters are put into reserved DWs
in Slot and Endpoint Context. But in coreboot synchronous transfer can
be ignored, so only two fields are set to a default value 1 to support
bulk and interrupt transfers, and others are set to zero.
3. For control transfer, it is better to read back doorbell register or add
a memory barrier after ringing the doorbell to flush posted write.
Otherwise the first command will be aborted on MTK's xHCI controller.
4. Before send commands to a port, the Port Power in PORTSC register should
be set to 1 on MTK's xHCI so a hook function of enable_port in
generic_hub_ops_t struct is provided.
Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41
Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b
Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/265362
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10389
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
BRANCH=none
BUG=none
TEST=none
Change-Id: I563ef65db900d7675aeb5b9123dfb5a8980bf964
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9764115d7bcce1d6423464bd81b58211ac728409
Original-Change-Id: Ibac8d3b9e28b4a563079f288901abcfbff6913ee
Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269863
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: http://review.coreboot.org/10388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Change-Id: Ifb19cf97d4db6c7394521e549968a0cfb6ed1c75
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0137652ca07e290bb3cb1cc82a00b44ac7bcc7bf
Original-Change-Id: Ica649927d3533c847b24e520e8fe73d75fb9e786
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/257375
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10170
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Changqi Hu