Commit f69a99db (coreboot: x86: enable gc-sections) added
gc-sections to the linker command line. The SMM-specific
linker scripts were not interrogated to see if all the
sections were being included properly. .data, .bss, and .sbss
did not have the proper globs set to put the SMM programs in
the expected order.
Lastly, explicitly set the ENTRY for the SMM programs.
Change-Id: Ibb579d18d4819af666d6ec7dfc30776e8c404b71
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9160
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When building HAVE_REFCODE_BLOB there are a couple of errors. One
is a failure building !CHROME_OS. The other is from a header
change where console_tx_byte() was declared.
Change-Id: I4110debd6d3818d4a803ed22037166c226f2ed11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9142
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
When building HAVE_REFCODE_BLOB there are a couple of errors. One
is a failure building !CHROME_OS. The other is from a header
change where console_tx_byte() was declared.
Change-Id: Ia912902e8276d13b8e1716aa16c57b111579a03d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9141
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Indicate to rest of coreboot that MAINBOARD_HAS_CHROMEOS
instead of auto-selecting it.
Change-Id: I61cde263f4ad7bd6758a61fc54c456c2ad2f343e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9153
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These binaries were being added to CBFS using hexadecimal values instead
of the CBFS binary type names. The same value was being used in
different places for different things.
For example, the value 0xAB is used for SPDs, MRC & FSP binaries.
This patch uses CBFS type names instead of hex values everywhere a
hex value was previously used.
Change-Id: Id5ac74c3095eb02a2b39d25104a25933304a8389
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Low level 64 bit division and modulo functions are not available for
MIPS platforms, but are required by the printk formatter.
Modify the code to avoid 64 bit math when building for MIPS. In case
the user does print a value exceeding 2^32, send a few junk characters
to the output to indicate a corrupted value printed.
[pg: add the printed sequence to the comment, so git grep can find it]
BRANCH=none
BUG=none
TEST=startup code on Urara properly prints CBFS address values which
are passed as 64 bit integers.
Change-Id: Ie777019cd8d55c53d5e816fbacfe79893c3d64c7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8347f914a9cceca017668f8387ba679c2c79e66d
Original-Change-Id: I25b8a900b3ba4ec1da3446dcc5f03101d5cdb757
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232294
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9162
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
This replicates commit 3f7ad7b216 and
commit 823edda98e for mips.
Change-Id: Id97e1fefa20cfa3bcb2cf0336b5a4ff7d9fe813b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9166
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The console interface changed in upstream, and the
driver didn't reflect that yet.
This wasn't obvious because the driver wasn't compiled
at all.
Change-Id: Id18391e62e7ebd8f5fc929838ce27bf414e364f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9165
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This doesn't even compile in downstream.
Change-Id: Ic7b3736db86e8de155e0f37afa970ce5095396fa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9164
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
The mips Makefile was inherited from x86 and so included lots
of stuff that is necessary on x86 but nowhere else.
That cruft is now gone.
It also adopts the non-x86 approach of handling linker scripts,
hardcoding an include to ldoptions there, instead of manual
concatenation (of just one file plus options).
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ibf0c7096f9425572d8f83837aa6a253fd91e212c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9163
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It's x86 specific.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Iacb91b47c89041435dd27c2c9ad34a231adf21d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9115
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Introduce generic-$(type)-ccopts and $(class)-generic-ccopts
to declare compiler flags that apply to all files of a certain
type or of a certain class. Then use them.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I655688e82a0cc5bad89b6f55dc217b9f66b64604
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9114
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I192fa50989b586fd8e967d4c22db56ac9de7a30e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9108
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I5405c0ee6bee203281e723feaecaee57fad8f6cb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9109
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
The ASUS KFSN4-DRE has a physical BIOS recovery jumper;
force coreboot into fallback mode if that jumper is set.
Change-Id: I513299c3e3261fc76133a49813685d48c53a172a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9156
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
It points to a binary.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I164d7f717a9523d187e2c215083e176b59fd5acc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9113
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ia22c9fcbf8c629d0eb3f1356f80c4565f117d8b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9110
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We have .lb, .lds, and .ld in the tree. Go for .ld everywhere.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I3126af608afe4937ec4551a78df5a7824e09b04b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I362e2f6a978de23e72e6fc9c83bc99457cd76d9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9112
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I8a5dc66d8c0dc4ccdb6dc3d66b8cdbf50dc976ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9111
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use the run_ramstage() function to load and run ramstage.
Change-Id: I783801bf506fa2f9608eefe1cd20257292c80af5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9148
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Add the approrpiate car* empty implementations as well as types
included within the rest of coreboot to start building correctly.
Change-Id: Ifaf10281f9a9e28f518f4694630cbffa3f8d187d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9150
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Aaron Durbin <adurbin@google.com>
With VPD blob of certain format, CBFS cache on storm proves to be not
large enough. This patch makes it bigger, it is still well above the
area preserved for the NSS.
BUG=chrome-os-partner:32152
TEST=the system now boots with the VPD it used to fail booting.
Change-Id: Iee1214b218ee3f8aca28797841501c227549affb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6f19ca8cb9a2efa1d295f038730ed06ec9ceb8c4
Original-Change-Id: Ia88b598ad5e4b6adcbd87d865e43be57fbf0ea98
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219572
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The actual level required to take the ethernet switch out of reset is
low, not high.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: If4004ac5c2dc837270d4cb840d96ce92021d231e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fa69d22de901cd0843948de0f95a66a2aa99353
Original-Change-Id: I81eeb73b85cf113709b6d4ac3aa7639a40fa6719
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217416
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The proto0.2 hardware connects gpio26 (sw reset) to the ethernet
switch reset pit. The output stays low (or high-z) after power up,
which holds the switch in reset. Deassert the signal at startup on
hardware rev 1 and later.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: I4c5a0cc499563a33aa7d29be7767d0ec5d93c20f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6788962172c6e29e193fa3e85ca79cb83a96e154
Original-Change-Id: I81b3dccb1d1d43c5c1e6dcb5400af8eed6dee870
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217087
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Figuring out board_id on storm requires reading tertiary gpios, which
takes time. Let's calculate it once and reuse it when necessary.
BUG=none
TEST=verified board ID reported as 0 and 1 on proto0 and proto0.2
respectively.
Change-Id: I69f6afa3de8a175a1d723e95902efd15607e68b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 080c839c1c0c1b5e389b2382144ef67535bb4ff1
Original-Change-Id: I4e237077d1d9a96daebba462cd00f3f40be14518
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217086
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The proto0 storm hardware has the TPM reset line wired to the SOC GPIO22
pin instead of the system reset. This causes all kind of TPM behavior
problems and requires frequent power cycles. Adding explicit TPM reset
makes all those problems go away.
BUG=chrome-os-partner:30705, chrome-os-partner:30829
TEST=tried resetting proto0 at different moments during boot up - the
TPM does not fail anymore.
Change-Id: Idfa16e6e868336f38861edeb75703fff3f35172c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5e07815c227089b7f266ba5329812bf309b87e6
Original-Change-Id: Ia877fcd9efaf3ba12c8fe8c2958bd81c4bf22799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211497
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Storm provides three real and two fake gpios. To keep things simple,
define them all as active low and provide appropriate values for the
fake ones.
BUG=chrome-os-partner:30705
TEST=with the appropriate depthcharge change booted proto0, observed
appropriate behavior following the dev switch setting
Change-Id: I248b90ee06d226a223b6fc0993f209acdd58c77d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d48d1dcc88df0c1bd4c50f14dd2e7cd1dd4fba5d
Original-Change-Id: Icb7fb55949fa97ead9d19f0da76392ee63bbb5b8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210922
Reviewed-on: http://review.coreboot.org/9117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's no need to add DMA ranges for these boards as
that memory is allocated within dpethcharge now. Additionally,
the DRAM_DMA_* Kconfig options were removed resulting in 0
values.
BUG=None
TEST=Built rush and ryu.
BRANCH=None
Change-Id: I597437960e4fddbf6d26f0b15ddeefc4557adc8b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26b503d759b2bac902e58e928d7c625c1a6c575
Original-Change-Id: I52bb8f760a56226c75611f7981570a44d56f242e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219710
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Clean up functions to write to clk_enb and rst_dev registers and add
clock_disable and clock_set_reset functions to provide a complete API for
updating the registers.
BUG=chrome-os-partner:31821
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on ryu. Compiles
successfully on rush
Change-Id: Ib0b7e3fc322f18be396ecf3b02b2399d4ba33e9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1bb222adc22c7e26077dfb2ba6e4d41a4965d183
Original-Change-Id: Icb8081fe3d80174c920eaaecf5cbb0aa912d5b19
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219191
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Since PSCI dynamically determines which EL to transition
to based on SCR_EL3 there's no need to provide that
information.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel with MP.
Change-Id: Ia59bc8116ec4ae9bde2e6cad1861f76c14f7d495
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8bc5f7c8a114568ede98478c2fbea2f8b7d97f0c
Original-Change-Id: I8783b6315dca01464e14c9d2b20d009cf0beeb67
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218924
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PSCI functionality initially includes CPU_ON and CPU_OFF
functions. Upon entering secmon if the parameters are non-NULL
then a PSCI CPU_ON action is done for the current CPU.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted kernel with PSCI support. Brought up all CPUs in kernel
using PSCI. Turned CPUs on and off.
Change-Id: I256fa45a1c9889ff9d7990eb1898df1ec241c117
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 689ba03e313e7e52e9b74aa774897b55cbd52748
Original-Change-Id: I943826b7dbcc8e3f6c8c4b66344af8fac12ba94e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218923
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9097
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
If an exception is taken that the secmon won't return
to, there needs to be way to reset that cpu's state
w.r.t. stack usage. Therefore, provide secmon_trampoline
which will reinitialize the exception stack and SP_EL0
and start executing with SP_EL0 like the initial state
of the secmon entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also tested when PSCI
is employed in the kernel.
Change-Id: Ie9f5bbe715dcbcf8b67ea40f9a3a5088ac7aa2ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1f546ee3e9eca93baaa1ae0437351205bf548a5
Original-Change-Id: Ia3da75e1fa0251c8ea30eb0b0523c8a51c03b917
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218922
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9096
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Two things:
1. Not returning once setting the return state.
2. mempcy(x, y, ARRAY_SIZE(x)) is not memcpy(x, y, sizeof(x))
With these 2 changes arguments and results are being processed
correctly.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and brought up SMP using PSCI.
Change-Id: If76a207e1a434a4c08faaa535f069d7386481e9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d540afd4e6ea2b34cf3632ad2c683fcaa063c8
Original-Change-Id: I656b9c11e3bc07cc1664789a600eb88afd639f93
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218847
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9094
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Do the absolute minimum needed to allow the DPAUX mux ctl write
for I2C6. This leaves HOST1X off (reset and clock disabled) to
avoid a conflict with any kernel display driver init.
I2C6 init/enable will be moved to ramstage in the next CL.
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I42106778a26c5a1d1483cc308b8314599c391539
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a9ebfda31c620b24e5c765dc950b87e3e5587b
Original-Change-Id: I0760222f1d7ccee207ae9871aeed3e2ddbca3dca
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218900
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9093
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to process PSCI commands SMC instructions need to be
serviced. Provide a simple way for users of SMC to register their
handlers by function.
The SMC layer hooks into the exception processing, however it only
processes AARCH64 SMC calls. All others are ignored.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Added nop smc call to depthcharge. SMC handled and continue booting
to kernel.
Change-Id: I378f13c29220ff9f37040f094bf9cfb69259af0c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76d2febc50397348b68d38532b8f37e2b3cf6a30
Original-Change-Id: Ieaa29fa883b9f9d55fc62ba92a1d45452296efa4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218846
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9092
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The exception vectors were not reinitialized in secmon yet.
Add that as well as the split BSP vs non-BSP path. In doing
so bring in the cpu.c semantics for determining bsp at runtime.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also noted only one CPU
printing messages.
Change-Id: I26a7f9446f4422d2203b1d520e69f8dee9450b59
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67f79c61c902ee614f029047255b4be35112cd32
Original-Change-Id: Ide66f13c24f5798d5983c481ce616ae2800d558c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218845
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9091
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's helpful to differentiate the startup paths for
the BSP and the non-BSP. Therefore have c_entry
be an 2 element array of function pointers. The
non-BSP paths have an entry point one instruction after
stage/module entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: I40bb40462906f1b1eaf2db8584985095e8ac0bae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce10f954041b3fd581ad8a3d82dee567b68637fe
Original-Change-Id: Ia573b1095dca5f69e371bf1ddf6b6df72fa3b52e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218844
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9090
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Aaron Durbin