This patch adds power state 1/2/3 threshold setting interfaces
and pass the settings to FSP.
BUG=b:229803757
BRANCH=None
TEST=Add psi1threshold and psi2threshold to overridetree.cb and
enable FSP log to ensure the settings are incorrect.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I0330ede4394ebc2d3d32e4b78297c3cb328660d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Add a variant specific S0ix hook to fill the SSDT table to disable and
enable camera during suspend and resume respectively.
BUG=b:206911455
TEST=Build Boten BIOS image. Ensure that camera is disabled during
suspend and enabled during resume.
Change-Id: I3229b22b8d8651bf2d9df25b10ce6749efde7cf6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Add new ram_id:3 (0011) for memory part K3LKCKC0BM-MGCP.
DRAM Part Name ID to assign
K3LKCKC0BM-MGCP 3 (0011)
BUG=b:247039096
TEST=Use part_id_gen to generate related settings and
emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I78d2e501b9d8d801a3d149002f638125bf4275f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
The µcode updates for Broadwell come from coreboot's blobs submodule
and have not been updated in at least 7 years. Use the µcode updates
available in the intel-microcode submodule. This change forgoes some
µcode updates for old Broadwell ULT/ULX steppings with CPUID 0x306d2
and 0x306d3, as well as an old µcode update for Haswell ULT/ULX CPUs
with CPUID 0x40651 in favor of a newer intel-microcode revision that
was already being used: when the µcode updates are concatenated into
one file, the newer µcode update revision would be placed before the
older revision, so the latter would never be used.
Change-Id: I67f8a58552bd211095c183e6f7a219d60e3be162
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Commit 27126f135d (cpu/intel/haswell: add
Crystal Well CPU IDs) introduced new Haswell CPUIDs but did not include
any µcode updates for them. It is unknown how this could have worked as
the initial µcode inside the CPU can be quite unstable. Intel CPUs with
support for FIT (Firmware Interface Table) can have their µcode updated
before the x86 reset vector is executed.
The µcode updates for Crystal Well CPUID 0x40661 can be found inside the
intel-microcode submodule. There are no publicly available µcode updates
for Crystal Well CPUID 0x40660 as it is a pre-production stepping, which
is not meant to be used anymore. Hook up the available µcode updates for
Crystal Well CPUs.
Change-Id: If5264f333e681171a2ca4a68be155ffd40a1043b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
There are two types of Haswell/Broadwell platforms: Trad(itional) with
separate CPU and PCH packages, and ULT/ULX where the CPU and PCH share
one package. Mainboards can specify which platform type they are using
the `INTEL_LYNXPOINT_LP` Kconfig option. There are so many differences
between Trad and ULT/ULX that it's not worth doing runtime detection.
The CPUIDs are different for Trad and ULT/ULX platforms, and so are the
µcode updates. So, including Trad µcode updates in a coreboot image for
an ULT/ULX mainboard makes no sense, and vice versa.
Adapt the Makefile so that only relevant µcode updates are added. Also,
add a few comments to indicate which updates correspond to which CPUs.
TEST=Run binwalk on coreboot.rom to verify included µcode updates for:
- Asrock B85M Pro4 (Haswell Trad)
- HP Folio 9480M (Haswell ULT/ULX)
- Purism Librem BDW (Broadwell ULT/ULX)
Change-Id: I6dc9e94ce9fede15cbcbe6be577c48c197a9212a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Builds are failing on upstream master branch because there is no
board_info.txt for the Intel Meteor Lake RVP mainboard; this patch
adds a basic one so the tree will build.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3356ad65132dc4aaebd5e7d959a2bdb9ab1316b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67711
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Modify config settings based on new module KBAE350 spec
BUG=b:245640845
BRANCH=None
TEST=Build and boot on skolas
Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Change-Id: I8a9bee9bb79bda4e3f1d259716844b42a7fce397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jimmy Su <jimmy.su@intel.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
FSP-M is not run XIP so it can be compressed. This more than halves
the binary size. 364544 bytes -> 168616 bytes.
On the up/squared this also results in a 83ms speedup.
TESTED: up/squared boots.
Change-Id: Ic76b51f0f3007b59ccb9f76b6a57bb9265dab833
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
On the intel/glkrvp
compressed:
- romstage: 29659
- verstage: 31303
non compressed:
- romstage: 46244
- verstage: 47012
On qemu (with some additional patch to not run XIP)
compressed:
- romstage: 11203
non compressed:
- romstage: 13924
Even with a small romstage the size improvements are substantial,
which should result in a speedup when loading the stage. On the
up/squared loading romstage is sped up by 9ms.
TESTED: successfully boot the up/squared & google/vilboz.
Change-Id: Iac24d243c4bd4cb8c1db14a8e9fc43f508c2cd5d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie7d40395d754b2abdf9079d6ee5e8ab8c536d449
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67661
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I35185b498315511f3236758caebfe2f9c28fd04a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65039
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adjust the EEPROM layout to account for two new fields: board part
number and product part number. In addition, put them in a Type 11
SMBIOS table (OEM Strings).
TODO: This currently stores the "raw" part numbers, should we add a
prefix to the SMBIOS strings?
Change-Id: I85fb9dc75f231004ccce2a55ebd9d7a4867fcb93
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67276
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use dynamic power and thermal configuration (DPTC) via ACPI ALIB calls
to throttle the SOC when there is no battery or critically low battery,
to enable the SOC to boot without overwhelming the AC charger and
browning out.
DPTC is not enabled for low/no battery mode with this CL. It will be
enabled for Skyrim in a following CL.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ifeddb99e97af93b40a5aad960d760e4c101cf086
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67189
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support for DPTC by calling SB.DPTC() as part of PNOT().
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ifc332bfc4d273031c93b77673224b4f3c2871fb1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67694
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the Normal Mode DPTC values for Skyrim.
These values were generated by AMD.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I1e1f55b941f3e70aad33d55a90fb012eac3ba12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67690
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add VRM DPTC limit registers. These are required when throttling the SOC
for low/no battery mode to prevent the SOC from overwhelming the
charger.
b/245942343 is tracking passing these additional fields to the FSP and
having the FSP configure them.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ie62129d967192f9a9cf654b1854d7dbe4324802a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67378
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update acpigen_write_alib_dptc() to support "low/no battery mode",
which throttles the SOC when there is no battery connected or the
battery charge is critically low.
This is in preparation for enabling this functionality for Mendocino.
BUG=b:217911928
TEST=Build zork
TEST=Boot nipperkin
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Icea10a3876a29744ad8485be1557e184bcbfa397
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66804
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are platforms equipped with AMD SoC where I2C3 controller
connected to TPM device is shared between X86 and PSP. In order to
handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends
acquire and release requests to be accepted by PSP.
Introduce new CONFIG for Mendocino SoCs similar to what we have for
Cezanne.
BUG=b:241878652
BRANCH=none
Signed-off-by: Jan Dabros <jsd@semihalf.com>
Change-Id: I015a24715271d2b26c0bd3c9425e20fb2987a954
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
ELAN6918 Power Sequencing seems not perfectly matching
with the previous platforms and setting GPP_C06 to high prior
to the power sequencing is actually makes it work.
Ideally Power Sequencing should be as below for ELAN6918 (in ACPI)
`POWER enabled -> RESET deasserted -> Report EN enabled`
But below sequence is only working currently:
`Report EN enabled (ramstage) -> POWER enabled (ACPI) -> RESET
deasserted (ACPI)`
BUG=b:247029304
TEST=Verified ELAN touch panel is working as expected after booting
Google/rex device to ChromeOS.
Change-Id: Ideaeb0faa882b8e603534bbface51ea76923d436
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
The brya4es variant is no longer needed, removing code for brya4es.
BUG=b:246611270
TEST=None
Change-Id: I9b222f89fe766c63158518713be19d7959451721
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Since there are no legacy devices on the variant mc_apl7 do not wait
for them on mc_apl7.
Change-Id: Ia4e6c0fb495a347be51bd6604a1d9b73098fb7b6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67684
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Test build for QEMU x86 i440fx/piix4.
Change-Id: I3144a83fcbd92eec51d70e9be33ff2fcb2821731
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67416
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The lbtable contains the memory entries that have fields unnaturally
aligned in memory. Therefore, we need to perform an aligned_memcpy() to
fix the issues with platforms that don't allow unaligned accesses.
BUG=b:246887035
TEST=cbmem -l; cbmem -r ${CBMEM ID}
Change-Id: Id94e3d65118083a081fc060a6938836f6176ab54
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
gcc12+ will require riscv architecture selection to come not only with
featurei suffixd charactersa, it also comes with feature_ful suffix_ed
words_mith. Much creative, very appreciate.
To accommodate for this madness, enable the already existing (but off by
default) support for that in our gcc11 build, support using by detecting
the compiler's behavior in xcompile and pass that knowledge along to our
build system.
Then cross our fingers and hope for the best!
Change-Id: I5dfeed766626e78d4f8378d9d857b7a4d61510fd
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Create an NVRAM space in TPM 2.0 that survives owner clear and can be
read and written without authorization. This space allows to seal data
with the TPM that can only be unsealed before the space was cleared.
It will be used during ChromeOS enterprise rollback to securely
carry data across a TPM clear.
Public documentation on the rollback feature:
https://source.chromium.org/chromium/chromiumos/platform2/+/main:oobe_config/README.md
BUG=b/233746744
Signed-off-by: Miriam Polzer <mpolzer@google.com>
Change-Id: I59ca0783b41a6f9ecd5b72f07de6fb403baf2820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
SMBus is typically enabled in the ROMSTAGE. To get the
BOOTBLOCK console message, the SMBus should be enabled
in the BOOTBLOCK stage.
Change-Id: I97d0afb013ede428383acaa0aa97ab04fe80e2a4
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67340
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Q0 stepping has a different ID than P1.
Reference: CML EDS Volume 1 (Intel doc #606599)
Change-Id: Id1da42aa93ab3440ae743d943a00713b7df3f453
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Using malloc would increase the heap use each time this function is
called. Instead allocate a per struct device buffer inside the
chip_info struct.
Found by coverity scan, CID 1488815.
Change-Id: Ie24870b34338624b3bf3a6f420debdd24a68ffbd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64338
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Enable nau8825 ADCOUT to make I2S signal meet spec.
BUG=b:234789689
TEST=I2S waveform can meet spec timing.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7ea472ac4e4add4e790b9b3fbb6becd40665eb1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Add a property to control the driving of ADCOUT.
BUG=b:234789689
TEST= build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ibbedd5838a795ee645a5458b960062c5530ff3b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
The patch updates comment on HFSTS1.spi_protection_mode.
The spi_protection_mode indicates SPI protection status as well as EOM
status (in a single staged EOM flow). Starting from TGL platform, staged
EOM flow is introduced. In this flow, spi_protection_mode alone doesn't
indicate the EOM status.
For information on EOM status, please refer secton# 3.6.1 in doc#
612229.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I19df5cfaa6d49963bbfb3f8bc692d847e58c4420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any
skyrim boards, similar to mainboard/google/zork/Kconfig. This makes the
value dptc_tablet_mode_enable redundant.
This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely
with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC
is only included for boards that actually enable it.
BRANCH=none
BUG=b:217911928
TEST=emerge-skyrim coreboot
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I73fca5a16826313219247f452d37fb526ad4f4df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Raihow Shi