Some variants may require more complex power sequencing than can be
accomodated with just 2 GPIO tables, therefore introduce one in romstage
as well.
BUG=b:187691798
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7a63a2ee2cd036b9ae5822be9c87d8a026a54922
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Install both versions of UEFITool, the one with the old engine and the
new one.
It's not possible to use both packages in the same environment, since
there is a collision between the names of the binary files. To make sure
a specific package is used, a new environment needs to be spawned with
the following command:
$ nix-shell -p <package_name>
The UEFITool binaries can be executed from the shell then.
Change-Id: Ia5d679c6e7cd01c2ab819bd6c085596a926c494d
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
gimble only uses one WiFi SAR table, contained in a file named wifi_sar_0.hex
BUG=b:189068477
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ied030b79183cc6f962674260e7a82a7261b317ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57616
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch fixes a few minor CBFS parsing edge cases that could lead to
unintended behavior: the CBFS attribute parser could have run into an
infinite loop if an attribute's length was (accidentally or maliciously)
invalid. A length of 0 would have caused it to read the same attribute
over and over again without making forward progress, while a very large
length could have caused an overflow that makes it go backwards to find
the next attribute. Also, the filename was not guaranteed to be
null-terminated which could have resulted in out-of-bounds reads on a
few error messages.
Finally, clarify the validity guarantees for CBFS header fields offered
by cbfs_walk() in the comment explaining cbfs_mdata.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ie569786e5bec355b522f6580f53bdd8b16a4d726
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
This patch adds a new variant called kingoftown.
it's clamshell only, no FPR, eDP panel.
BUG=b:198365759
BRANCH=master
TEST=make
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I648664c50dfad11530a854f574f39264158b44e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This is no longer needed, since now this parameter is already set using
the ONBOARD_VGA_IS_PRIMARY config [1].
[1] commit 1a4496e79f
Change-Id: I368fa5d13615dc4ee37db596cb6a5eef993fc220
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is no longer needed, since now this parameter is already set using
the ONBOARD_VGA_IS_PRIMARY config [1].
[1] commit 1a4496e79f
Change-Id: Ie1bd62ecba2155af5c94f043ea7531f32989588f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
In order to distinguish which mipi panel to use,
it need to read the PANEL_ID, and combine
the PANEL_ID and SKU_ID into a new SKU_ID.
BUG=b:197708579,b:191574572,b:198548221
TEST=PANEL_ID should be set correctly.
BRANCH=none
Change-Id: I018b3f460f9d084d1a3f0dac026f1cd9dde284e2
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This change uses the newly added `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES`
Kconfig to enable USB4 resources and drops the configuration
in mainboard.
Change-Id: I707c5d63ea8c58e72126fe0d319ba81a99221ba5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change uses the newly added `SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES`
Kconfig to enable USB4 resources and drops the configuration in
mainboard.
Change-Id: Id0951937cab8bf5432fc902ba7af21f56fe98087
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Intel TGL BIOS specification (doc ##611569) Revision 0.7.6 Section
7.2.5.1.5 recommends reserving the following resources for each PCIe
USB4 root port:
- 42 buses
- 194 MiB Non-prefetchable memory
- 448 MiB Prefetchable memory
This change enables reserving of resources for USB4 when mainboard
selects the newly added Kconfig SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES.
This is similar to the change for ADL in commit 8d11cdc6fa
("soc/intel/alderlake: Add Kconfig for recommended PCIe TBT resources").
Change-Id: I25ec3f74ebd5727fa4b13f5a3b11050f77ecb008
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CBFS file with lenth of (UINT32_MAX - cbfs_file.offset + 1) causes
overflow, making cbfs_walk() being stuck in an infinite loop, and
checking the same file. This patch makes cbfs_walk() skip file headers
with incorrect data_offset or data_length.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I70020e347087cbd8134a1a60177fa9eef63fb7bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
It avoids the dependency on bison/flex, minimally speeds up the build
and also works around weird race conditions in some versions of bison
that need more investigation.
The issue this avoids manifests as a build error when creating
parser.tab.c:
input in flex scanner failed
make: *** [util/kconfig/Makefile.inc:66: build/util/kconfig/parser.tab.c] Error 2
Since the error happens within bison the alternative would be to make
bison part of our crossgcc environment to ensure that no broken OS
build is used.
BUG=b:197515860
TEST=things build with bison not installed
Change-Id: Ib35dfb7beafc0a09dc333e962b1e3f33df46a854
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With parser.tab.h depending on parser.tab.c it's possible for make
to initiate the creation of parser.tab.c, then try to compile it,
even though parser.tab.h is still missing.
This isn't normally an issue yet because bison creates them both at
a time but with pre-compiled files this will become a problem.
Pattern rules support (until recently as a special case that no other
type of rule could implement) multiple targets that are actually
treated as "one command creates multiple output files" so use that
to state the relationship properly.
Change-Id: I4aa7eca9d3123808e0665a15a99c04fac7384940
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
We use cpuid_eax to get the cpuid family.
BUG=b:179699789
TEST=build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib73e66241bb0cfd99a035c217c527338aa2d0e4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
By adding TEST_PRINT=1 to <test-name>-config field or by passing it as
a parameter to make one can enable printing in printk() and vprintk().
This can be helpful when developing unit tests.
Note, that to effectively enable or disable printk() printing to stdout,
test(s) have to be recompiled.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ibdec8bb128f42ba4d9cb8bbb4a8c5159a2b52ac5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Manually maintaining a list of fields just to avoid printing some
unnecessary CPP guards isn't worth the maintenance burden. Instead,
always generate these guards, even if they guard nothing.
Change-Id: I6c84180d83ac39a895e02d196acb7074eb052d7f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57459
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If a device is disabled, do not call the `get_smbios_data` code.
Change-Id: I8960f869e0864f7c82d5fe507f96b62cbd045569
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The call to the `get_smbios_data` device operation is followed by
calls to unconditional default functions, which lacks flexibility.
Instead, have devices that implement `get_smbios_data` call these
default functions as needed.
Most `get_smbios_data` implementations are in mainboard code, and are
bound to the root device. The default functions only operate with PCI
devices because of the `dev->path.type != DEVICE_PATH_PCI` checks, so
calling these functions for non-PCI devices is unnecessary. QEMU also
implements `get_smbios_data` but binds it to the domain device, which
isn't PCI either.
Change-Id: Iefbf072b1203d04a98c9d26a30f22cfebe769eb4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Avoid SMBIOS type 16 Maximum Capacity showing incorrect
information when value of maximum capacity exceeds 32 bits by
extending the type.
Handle 0x0009, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 4 TB
Error Information Handle: Not Provided
Number Of Devices: 6
Tested=On OCP Crater Lake, the SMBIOS type 16 shows expected
Maximum Capacity.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Change-Id: Iaa79cc587808f1eab0a48e2ce1dab089e84e9721
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Daocheng Bu <daocheng.bu@intel.com>
...because I just spent hours chasing a refactoring bug that would have
been way more obvious with a little more error transparency in here.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3354ff0370ae79f05e5c37d292ac16d446898606
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add additonal LPDDR4 speed grades. This is needed because the limited
set has casued confusion when the reported speed did not match
expectations. There does not seem to be a definitive list of LPDDR4
speed grades, so this list is derieved from JEDEC 209-4C and a survey
of commonly used LPDDR4 speed grades.
BUG=b:194184950
TEST=Boot, dmidecode -t 17 reports correct speed
BRANCH=None
Change-Id: Ie7706fd4ad5a7df68c07b8ca43261429ba140c61
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AA-MGCR (Samsung)
BUG=b:192521391
BRANCH=dedede
TEST=Build and boot bugzzy board
Change-Id: Ic0b02559c671845a73a71bd57cd7237850c76645
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Fixes commit bd5b4aa683
"soc/intel/cannonlake: Switch PMC to use device callbacks" as it
requires the PCI device 1f.2 to be present in the devicetree.
It was missing for this mainboard and caused a boot failure.
Change-Id: Iaf508b2d955578efa2a266af50c568f5c0a47aaf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57574
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The MIPI source video data has a large variation (e.g. 59Hz ~ 61Hz),
anx7625 defines K ratio for matching MIPI input video clock and
DP output video clock. A bigger k value can match a bigger video data
variation. IVO panel has smaller variation than DP CTS spec, so decrease
k value to 0x3b.
BUG=b:194659777
BRANCH=none
TEST=Display is normal on Asurada
Change-Id: If3a09811999babda45e9a9a559dd447920109204
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
The ANX7625 display bridge requires customized
hs_da_trail time.
This patch is based on CB:51433 (commit 6482b16,
"mb/google/kukui: fine tune the data lane trail")
BUG=b:198558237
TEST=emerge-asurada coreboot
BRANCH=asurada
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Change-Id: I0eedb8fa6a1b3dfd9619c7cbf755c9c4071a8484
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Add mipi panel support for mrbland
- Setup gpio and modify LCD sequence.
- Use the following panel for mrbland:
AUO B101UAN08.3
BOE TV101WUM-N53
- Use panel_id to distinguish which mipi panel to use.
BUG=b:195516474,b:197300875,b:197300876
BRANCH=none
TEST=emerge-strongbad coreboot
Change-Id: Ib7cd2da429b114bf6bad5af312044a0f01319b46
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57336
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Our MIPI panel initialization framework differentiates between DCS and
GENERIC commands, but the exact interpretation of those terms is left to
the platform drivers. In practice, the MIPI DSI transaction codes for
these are standardized and platforms always need to do the same
operation of combining the command length and transfer type into a
correct DSI protocol code. This patch factors out the various
platform-specific DSI protocol definitions into a single global one and
moves the transaction type calculation into the common panel framework.
The Qualcomm SC7180 implementation which previously only supported DCS
commands is enhanced to (hopefully? untested for now...) also support
GENERIC commands. While we're rewriting that whole section also fix some
other issues about how exactly long and short commands need to be passed
to that hardware which we identified in the meantime.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I09ade7857ca04e89d286cf538b1a5ebb1eeb8c04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
The USB descriptions are flipped. Fix by inverting the USB descriptions
in devicetree.
BUG=None
TEST=Build
BRANCH=None
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I4b33f4de137536c5f3592380da15f6b3a3633bf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57538
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a short documenting comment to each usb entry in devicetree so it is
clear which function each usb port maps to.
BUG=None
TEST=Build
BRANCH=None
Change-Id: I14cbb6af021bb27c89aa82456722f21aa09617be
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56725
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Moves MAX_EVENT_SIZE to commonlib/bsd/include, and renames it
ELOG_MAX_EVENT_SIZE to give it an "scoped" name.
The moving is needed because this defined will be used from
util/cbfstool (see next CL in the chain).
BUG=b:172210863
TEST=compiles Ok
Change-Id: I86b06d257dda5b325a8478a044045b2a63fb1a84
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Adds "clear" command to cbfsutil/elogtool tool.
"clear" clears the RW_ELOG region by using either:
* flashrom if no file is provided
* or using file write if an input file is provided.
The region is filled with ELOG_TYPE_EOL. And a
ELOG_TYPE_LOG_CLEAR event is inserted.
Additionally, it does a minor cleanup to command "list", like:
* use buffer_end()
* add "list" to the cmds struct
* and make elog_read() very similar to elog_write()
Usage:
$ elogtool clear
BUG=b:172210863
TEST=elogtool clear && elogtool list
elogtool clear -f invalid.raw
elogtool clear -f valid.raw
Change-Id: Ia28a6eb34c82103ab078a0841b022e2e5e430585
Signed-off-by: Ricardo Quesada <ricardoq@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
After switching to runtime generation of the Intel Power Engine (PEPD)
device, this file is no longer required.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I2444433f08bfda6f79589a397a2ad2b5a3ecb0ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The pep.asl file is being obsoleted by runtime generation, therefore
switch skylake boards to this method.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7c7cb424278946a9767ea329d18fb03d4e57dce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to get rid of pep.asl, skylake also needs to support runtime
generation of the Intel Power Engine, therefore add this support to
devices that have a discoverable PMC as well.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I4bf0c4a338301b335fa78617e0f2ed5a9f4360ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The pep.asl file is being obsoleted by runtime generation, therefore
switch elkhartlake boards to this method.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I47f03b440729d4b37ae0abc84bd1d18c4e01657d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The pep.asl file is being obsoleted by runtime generation, therefore
switch jasperlake boards to this method.
soc/intel/jasperlake: Switch to acpigen PEPD
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib7f17f9b3b1396708ba68fa7a6d199d6e8b0ba11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tim Wawrzynczak