This patch makes it possible to enter the config mode of the super IO chip, so
that changes can be made to the configuration registers.
Change-Id: I7e31eaf217b3af2226c1e7d2f14f2ef7b0d7ddbe
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Since ops was passed as override in the pnp_dev_info struct, the generic
pnp_ops that was passed to pnp_enable_devices was never used.
Change-Id: Id09c6cffb9a0cbbd9189c18801121449c9504422
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27394
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The bus width has to be encoded where the lower 3 bits are the bus width
in multiple of 8 and the following two bits give the error checking
bits in multiple of 8.
Hardcode to 64 bit as done on haswell.
TODO: Make it dynamic once there's ECC support.
Change-Id: I3b83a098205455b1c820d0436c6984938f261466
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
On desktop boards the PPD bit of MRS register MR0 is set and thus
DLL_Off mode shouldn't be used, as enforced by datasheet
2nd-gen-core-family-mobile-vol-2-datasheet chapter 2.17.1.
Change-Id: Ic42f2ff3e719636be67b00fa37155939cd2e17de
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Descriptions are taken from the files themselves or READMEs. Description
followed by a space with the language in marked up as code.
Change-Id: I5f91e85d1034736289aedf27de00df00db3ff19c
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The used super IO is selected in Kconfig depending on the board variant, so use
the selected super IO instead of the board variant directly.
Change-Id: I8421e7c9b1f9ca875c9291f4105c3c20726adfd0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Libgfxinit provides a better alternative to the native C init. While libgfxinit
mandates an ada compiler, we want to encourage use of it since it is in much
better shape and is actually maintained.
This way libgfxinit also gets build-tested by Jenkins.
Change-Id: I9228fa7eadfe2a827c1f4de9d6710b60d3f1b121
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Untested but expected to work.
Change-Id: I5a77b7a4343f108f46cf1f97a94e61e88eecb417
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27514
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MT8183 only allows booting from eMMC, so we have to do eMMC emulation
from an external source, for example EC, which makes the size of
bootblock very important.
A fully functional bootblock (that can boot into verstage or romstage)
is about 38000 bytes. If self decompression (CONFIG_COMPRESS_BOOTBLOCK)
is enabled, only 25088 (66%) bytes are needed.
Inspired from crosreview.com/1070018.
BUG=b:80501386
TEST=manually flashed into kukui and boots into romstage.
Change-Id: I7a739866a4ea3bcafe2ff7b9e88d5ed00f3f3e40
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/27599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
These values are Intel recommended.
IccMax = 28A
DC and AC LL = 4mOhms
Pl2 = 18w
BUG=b:79666828
BRANCH=none
TEST=Enabled p-states with patch
Change-Id:I82d1516998cc26b789faa5d4e897feb06dc06020 and then
"emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi
image onto nocturne, boot to kernel and verify device stays alive and
responsive for several minutes without locking up.
Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/27175
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables p-states for nocturne which was disabled by commit
de31587a (mb/google/poppy/variants/nocturne: disable p-states). p-states
feature was disabled as a temporary work-around as system was getting
hung while booting up. Now with IMVP7 firmwware turning and hardware
rework the issue is not seen, so its safe to enable p-states.
BUG=b:79666828
BRANCH=none
TEST=cherry picked Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d
patch and then "emerge-nocturne depthcharge coreboot chromeos-bootimage"
, flash spi image onto nocturne, boot to kernel and verify device stays
alive and responsive for several minutes without locking up.
Change-Id: I82d1516998cc26b789faa5d4e897feb06dc06020
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/27257
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With python3 the split method can operate on strings while check_output
generates bytestrings.
Change-Id: I7b455c56e8195f0ecfbe5e360ac161c176f00115
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
python-recommonmark is need for sphinx to be able to hande the markdown
documentation.
Change-Id: I9513ab4bdc753e0350754d9869239ea833893af9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add Kconfig options to not build the Arm Trusted Firmware, but use
a precompiled binary instead. To be used on platforms that do not
have upstream Arm Trusted Firmware support and useful for development
purposes.
It is recommended to use upstream Arm Trusted Firmware where possible.
Change-Id: I17954247029df627a3f4db8b73993bd549e55967
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
For unused pins in octopus baseboard, configure them as GPIO input
and use the default termination. For the pins where board has an
external termination, remove SOC's internal termintation.
BUG=b:110654510
Change-Id: I67ec62913b0ef47105289838218f5d74c004223c
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/27183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
As per the ACPI specification, there are two types of power button
devices:
1. Fixed hardware power button
2. Generic hardware power button
Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
is not set in FADT by the BIOS. This device has its programming model
in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
power button device by default if the power button FADT flag is not
set.
On the other hand, generic hardware power button can be used by
platforms if fixed register space cannot be used for the power button
device. In order to support this, power button device object with HID
PNP0C0C is expected to be added to ACPI tables. Additionally,
POWER_BUTTON flag should be set to indicate the presence of control
method for power button.
Chrome EC mainboards implemented the generic hardware power button in
a broken manner i.e. power button object with HID PNP0C0C is added to
ACPI however none of the boards set POWER_BUTTON flag in FADT. This
results in Linux kernel adding both fixed hardware power button as
well as generic hardware power button to the list of devices present
on the system. Though this is mostly harmless, it is logically
incorrect and can confuse any userspace utilities scanning the ACPI
devices.
This change gets rid of the generic hardware power button from APL
and relies completely on the fixed hardware power button.
BUG=b:110913245
TEST=Verified that fixed hardware power button still works as expected
on octopus.
Change-Id: I86259465c6cfaf579dd7dc3560b4c9e676b80b55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27273
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per the ACPI specification, there are two types of power button
devices:
1. Fixed hardware power button
2. Generic hardware power button
Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
is not set in FADT by the BIOS. This device has its programming model
in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
power button device by default if the power button FADT flag is not
set.
On the other hand, generic hardware power button can be used by
platforms if fixed register space cannot be used for the power button
device. In order to support this, power button device object with HID
PNP0C0C is expected to be added to ACPI tables. Additionally,
POWER_BUTTON flag should be set to indicate the presence of control
method for power button.
Chrome EC mainboards implemented the generic hardware power button in
a broken manner i.e. power button object with HID PNP0C0C is added to
ACPI however none of the boards set POWER_BUTTON flag in FADT. This
results in Linux kernel adding both fixed hardware power button as
well as generic hardware power button to the list of devices present
on the system. Though this is mostly harmless, it is logically
incorrect and can confuse any userspace utilities scanning the ACPI
devices.
This change gets rid of the generic hardware power button from all
google mainboards and relies completely on the fixed hardware power
button.
BUG=b:110913245
TEST=Verified that fixed hardware power button still works correctly
on nautilus.
Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Logic: If vboot is not used and the tpm is not initialized in the
romstage makes use of the ramstage driver to initialize the TPM
globally without having setup calls in lower SoC level implementations.
* Add TPM driver in ramstage chip init which calls the tpm_setup
function.
* Purge all occurrences of TPM init code and headers.
* Only compile TIS drivers into ramstage except for vboot usage.
* Remove Google Urara/Rotor TPM support because of missing i2c driver
in ramstage.
Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24905
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set tREFIx9 to 8.9*tREFI/1024 as suggested in
xeon-e3-1200v3-vol-2-datasheet.pdf chapter 4.2.15 or
2nd-gen-core-family-mobile-vol-2-datasheet chapter 2.14.1.
Use the minimum value of REFI*8.9 and tRASmax as suggested by
3rd-gen-core-desktop-vol-2-datasheet.pdf chapter 2.13.9.
Change-Id: Ifd32a70f28aa75418030b0e4d1fc7d539a315f83
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array
Change-Id: I4311834f3970bd3471f2f5a73ca7da3c03936d37
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array
Change-Id: I14dbeda9832a25116cf53c36197615e9d02d5134
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array
Change-Id: I42469c844074db57071d0191d12d8fd64f462672
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array
Change-Id: I5bd525532c01b3b9f7ddbc8eab42caa8b7f30795
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array
Change-Id: Ic6387032e043b6ad9e9ceefd2fcc1cdf843e2989
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
When extracting a payload from CBFS, ignore compression fields for
these types of payload segments:
- PAYLOAD_SEGMENT_ENTRY
- PAYLOAD_SEGMENT_BSS
- PAYLOAD_SEGMENT_PARAMS
These types of payload segments cannot be compressed, and in certain
cases are being erroneously labeled as compressed, causing errors
when extracting the payload.
For an example of this problem, see creation of PAYLOAD_SEGMENT_ENTRY
segments in cbfs-mkpayload.c, where the only field that is written to
is |load_addr|.
Also, add a linebreak to an ERROR line.
BUG=https://ticket.coreboot.org/issues/170
TEST=cbfstool tianocore.cbfs extract -m x86 -n payload -f /tmp/payload -v -v
Change-Id: I8c5c40205d648799ea577ad0c5bee6ec2dd7d05f
Signed-off-by: kitching@google.com
Reviewed-on: https://review.coreboot.org/27520
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is how these MSR's are referenced in Intel® 64 and IA-32 Architectures
Software Developer’s Manual.
The purpose is to differentiate with MSR_SMRR_PHYSx.
Change-Id: I54875f3a6d98a28004d5bd3197923862af8f7377
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Coolstar's custom touchpad drivers for Windows require level triggering,
and the Linux drivers don't care/perform identically either way. Set
touchpad interrupt to level trigger, matching change made to other
Chromebooks.
Test: boot Windows 10 on google/chell, verify touchpad functional
Change-Id: Id5f145b8b24c04f9c6661710a0cda95f135293e9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Explicitly enable VMX, as some OSes (eg, Windows) need VMX
feature enabled and locked in order to fully support virtualization
Test: boot Windows 10 on google/chell, verify OS reports virtualization
enabled
Change-Id: I53ff575755a9ca376dbf953db96191c17bf57f5f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
* Call sleep and wake functions
* Add GBEs for wake
Change-Id: I0cf2cffd06fe2470c2a8f1d8b57de282362ec17e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Configure SuperIO on shutdown to keep devices enabled, set green LED
to fading on sleep and normal on wake.
Add SSDT to write LDN4 IOBASE addresses stored in devicetree.cb.
Tested on HP8200:
* Wakes from power button or USB keyboard.
* LED is fading
Change-Id: I2035249a39616aa2d87bd93f9e49c70d231546cc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Fixes Sphinx WARNING document isn't included in any toctree
Change-Id: I956ed23d87c7cbd65383cc64a6af7161e90d6611
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fixes Sphinx WARNING document isn't included in any toctree
Change-Id: I4464da8abe7631ec97343059fd36dc96cc17ac12
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This fixes most of the simpler shellcheck errors in shellcheck 0.4.6.
There are still a few warnings left that weren't simple to fix or
would have required more testing before I was confident in them.
Change-Id: I79ab3614cc1d69d3dfe1e0374e930313f2011cbf
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add the Do-not-assume-glibc-glob-internals patch to fix segfaults.
- Update glob_interface_v2 patch to the patch directly from the
make git repository instead of translating it. This gives better
attributution to the original author.
Change-Id: Ibc936fc00925a4ca2170a6f5dca7c2b8d8d62f02
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Exclude build flags that generate warnings when scanbuild is running
- Add the SCANBUILD_ARGS variable to abuild so we can pass in arguments
to scanbuild.
- Set the default scanbuild argument to -k (--keep-going) so that even
if an error occurs it continues with the scan. This is similar to what
we do with coverity runs.
Change-Id: I82e7c13d7fd7432b43c17a31834ec82fca158a07
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Create a new target, docker-jenkins-attach, to access the running
jenkins server
- Update docker-shell target to set term & size.
Change-Id: Ifa67afb62d4a216281ebece405e9b26fd4d14622
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27494
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds variant rammus derived from baseboard poppy.
The setting is copied from the poppy and will be modified later
BUG=b:111579386
BRANCH=master
TEST=emerge-rammus coreboot
Change-Id: I169c225e28183a7a93f1142a3bf87a60b26ce9ca
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/27547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
CONFIG_VGA is only used with C native graphic textmode.
Change-Id: Iafa9e96fd001cd148889ef534e6499f562e7dec6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27530
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are single-node platforms with CONFIG_CBB==0 everywhere
in the tree. Remove guarded code that was not built.
Change-Id: I6118249937e6c8032acd78018c7c83b1da078f7f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Enable fast or extended DRAM test based on devicetree setting.
The fast DRAM test takes less than a second, while the
extended runs about 1 minute.
Tested on Cavium Soc.
Change-Id: I6a375f3d4c5cea7c3c0cd4592287f3f85dc7d3cf
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Felix Held