This is added at runtime.
Change-Id: I7716f8a972e2280179aa6aee00488b22413c0c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69298
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Zork boards will not boot without PSP verstage/VBOOT, so select it
by default.
Change-Id: I2447bf69baefd5560a0153dcd3d9b87b0a91a3f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69763
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will avoid clearing the other bits in fifo_status.
Change-Id: I7917b3f8d9af6056ed872b7e48cef9c3deba5119
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch adds PCIe based SD controller at RP 7 (from RP 11) with
Proto 1 schematics dated 11/30.
Additionally, added the RTD3 entries for the SD controller.
Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in
bootblock and SD_PERST_L (GPP_D02) is configured in romstage to
meet the power cycle requirement.
BUG=b:242917011
TEST=Able to build and boot Google/Rex. SD card detection is due
for the Proto 1 hardware.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch drops the usage of reading `board_id()` while performing
the GPIO configuration.
The reason to drop the board_id check is to ensure that GPIO
configuration for MLB (mainboard) would remain the same and the only
GPIO PIN configuration that differs would be due to usage of having
different DBs (daughter board) which will be taken care using
CBI (and fw_config.c file) in coreboot.
Additionally, drop unused early GPIO default configuration table.
BUG=b:260804656
TEST=Able to perform the GPIO configuration and able to boot
Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Enable this feature, and it can use the probe statement in devicetree
to cache of fw_config field as oem string.
TEST=With CBI FW_CONFIG field set to 0x1561
localhost ~ # dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: AUDIO-MAX98357_ALC5682I_I2S
String 2: CELLULAR-CELLULAR_PCIE
String 3: UFC-UFC_MIPI
String 4: WFC-WFC_MIPI
String 5: DB_SD-SD_GL9755S
Change-Id: I6cb35eb9c0fbe32764ca76bb7a929cc92fc38404
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
NVMe is determined by a logical bit 1, not the physical SKU pin.
Thus, (logical) sku_id & 0x2 == 0x2 would mean that the device has
NVMe enabled on it. Previously, I thought that it was tied to a
physical pin, but this is not correct.
BUG=b:254281839
BRANCH=None
TEST=flash and boot on villager and make sure that NVMe is not
initialized in coreboot.
Change-Id: Iaa75d2418d6a2351d874842e8678bd6ad3c92526
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70230
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes using USB-C devices in either orientation on left-side USB-C
port.
Test: Plug USB-C device in both orientations on left-side USB-C port,
check speed with lsusb -t.
Change-Id: I9fbc53bb51a5225e92b0b6bb9ced87a0ab90c9ce
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69702
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The devices in the list that was introduced in commit c66ea98577
("soc/intel/alderlake: provide a list of D-states to enter
LPM") are all internal. This CL skips the external buses (which caused
the addition of packages to non-existant paths such as
"_SB.PCI0.RP1.MCHC", and warnings from the kernel)
BUG=b:231582182
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I3785b2b2af85d96e2e1296b6cfdefcd72080b5fe
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70163
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add WiFi SAR table for zydron.
BUG=b:260770999
TEST=build FW and checked SAR table can load by WiFi driver.
Change-Id: I8d5f966c7af3ac6d9923d4f6c851bfb340f31fab
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Per Intel doc 621483, 26.1.1 - NMI_STS_CNT, 8254 timer is required
for Speaker Data output (buzzer) at GPP_B14 NF1, as it is using
8254 timer counter 2 output. However when 8254 timer is used, S0ix
will not work as 8254 has to be gated instead. For further info on
s0ix requirements, refer to Intel doc 610002 (Modern Standby Unified
Checklist).
This CL also disables s0ix because it is not required by the
platform.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Ib5e7787a47509ed09818d8515d21a80196fb1ec6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67553
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
'gpu_lvds_use_spread_spectrum_clock'is only used on i945.
Change-Id: I0f63f18d3f57ef8774f22ca9eb8c20dd39c56cdc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70147
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"use_crt" and "use_lvds" are boolean, so use "true/false".
Change-Id: I5b5b42c27351331ad40fbe92fb87390cb1284aa9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70148
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After changing EC detection of S0ix from CPU_C10_GATE# to SLP_S0# in
system76/ec@cc3effb6a4 ("board/system76/common: use SLP_S0# pin for
modern standby detection"), DevSlp blocks suspend entry. Disable it
until it is fixed.
Change-Id: I586245ebf9f9d5ad08f6745a450411f194a661da
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The Galago Pro 6 (galp6) is an Alder Lake-P board.
Tested with a custom edk2 UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots (with NMSO480E82-3200EA00)
- M.2 NVMe SSD (with MZVL2500HCJQ)
- All USB ports
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Backlight controls on Windows 10 and Linux 6.1
- HDMI output
- DisplayPort output over USB-C
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.0.6
- Internal flashing with flashrom v1.2-1087-gde016a17
Not working:
- Detection of devices in TBT slot on boot
Change-Id: I8940fb3777d7f18393ef50baec32f9445b375648
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The Piglin & Hoglin boards were built with a couple of different sizes
of ROM chips. Despite this, the desire was to use just a single FMD
file. The different sizes are already accounted for in Kconfig, so
add the Kconfig size here to be used.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ia75725b0c4d61e832c94160fa4cd455e89c60274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
`python` as a command isn't universally available anymore after the
python2/python3 drama.
Change-Id: I9d68873d86dc3f044238d921c10fc434a83a76f5
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch selects SOC_INTEL_CSE_SEND_EOP_LATE config to let IA
common code to skip sending CSE EOP cmd during finalize operation
rather uses boot state machine (either payload load or payload boot)
to delay in sending EOP cmd to CSE.
BUG=b:260041679
TEST=Able to boot to Google/Rex with this patch and observed ~150ms
savings in boot time
Without this patch:
942:before sending EOP to ME 1,795,702 (354)
943:after sending EOP to ME 1,950,526 (154,824)
With this patch:
942:before sending EOP to ME 2,051,406 (35,484)
943:after sending EOP to ME 2,057,583 (6,177)
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7d44d5eff890ac78e3075d49cc249f740686dd0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69999
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch allows to send late EOP cmd to CSE (after CSE .final)
using boot state machine (either BS_PAYLOAD_BOOT or BS_PAYLOAD_LOAD)
if the SoC user selects SOC_INTEL_CSE_SEND_EOP_LATE config.
Rename `set_cse_end_of_post()` to `send_cse_eop_with_late_finalize()`
to make the function name more meaningful with its operation.
BUG=b:260041679
TEST=Able to boot Google/Rex after sending CSE EOP late.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If4c4564befcd38732368b21f1ca3e24b68c30e0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch creates an API that can perform essential CSE operation
after sending the late EOP command to the CSE and prior booting to OS.
Lists of operation are
- Perform global reset lock
- Put HECI1 to D0i3 and disable the HECI1 if the user selects
- Set D0I3 for all HECI devices.
BUG=b:260041679
TEST=Able to boot Google/Rex after sending CSE EOP late.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I10131ea9b553a62f0d632783c4dbad96d35d6563
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69977
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch refactors common code to allow cse_final() function to send
EOP cmd if the SoC user selects `SOC_INTEL_CSE_SET_EOP` kconfig.
This patch helps cse_final_ready_to_boot() and
cse_final_end_of_firmware() function for being meaningful with its
operation and let cse_final() being that outer layer to perform three
operations based on the selected kconfig.
1. send cse eop command
2. perform cse_final_ready_to_boot() operations
3. perform cse_final_end_of_firmware() operations
Additionally, ensures the platform that choose to send EOP late
(like JSL and TGL) is not being impacted due to this code refactoring
hence, skip calling into CSE.final if SoC selects
`SOC_INTEL_CSE_SEND_EOP_LATE` config.
BUG=b:260041679
TEST=Able to send EOP command successfully for Google/Taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I412291c9378011509d3825f9b01e81bfced53303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69975
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Presently, coreboot supports two instances of sending EOP cmd to
the Intel CSE.
1. Sending EOP cmd to CSE during `.final` operation from cse pci driver.
2. Starting with Alder Lake, the recommendation was to send EOP to CSE
earlier than CSE `.final` operation. Since then it's referred to as
`Sending EOP Early`. This method helped to save the CSE EOP
response time significantly.
During Meteor Lake platform, CSE EOP response time has become
non-deterministic and we have figured that sending EOP command later
than CSE .final operation is actually helping to optimize the boot time
significantly (around ~150ms savings compared to sending from `.final`
ops and ~5sec compared to sending CSE early).
Hence, this patch intended to create yet another kconfig for sending
CSE late (specifically after `.final` operation). The idea for this
newer config is to use the boot state machine for sending CSE EOP cmd.
The patch train in this series would add the specific changes to allow
sending EOP late and perform other essential operations required prior
booting to OS as coreboot decided to skip calling into FSP Notify phase.
Starting with Jasper Lake, coreboot sends EOP before loading payload
hence, this config is applicable for those platforms.
The current plan is that Intel Jasper Lake, Tiger Lake and Meteor Lake
platform will select this newer config from SoC code.
BUG=b:260041679
TEST=Able to send EOP command successfully for Google/Taeko.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iea512cd5b79d61dd5d5a962079baf525027c831f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69976
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Building of LLVM tests and examples is enabled by default, but they are
not necessary. Thus disable them.
Change-Id: I58b09e276967e97856da65e5876b27f0bae3f0cc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
To improve the readability and visibility of the configure options, move
each of them to a separate line.
Change-Id: Ifc39e4d0849d220d85e1d9ce92fc008fec610694
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Adjust scl_lcnt, scl_hcnt, sda_hold value for I2C5 to meet
touchpad SPEC.
BUG=b:260540852
BRANCH=firmware-brya-14505.B
TEST=build, checked TP function work normally,
and measure the timing meet SPEC
tLOW ~1.72 us
tHIGH ~0.63 us
tHD ~0.69 us
fscl 383 kHz
Change-Id: I9036a604a90558911c4f8a492db9f1f0f28bf404
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Enable DPTC support for frostflow.
BUG=b:257187831
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iac7b8789a5189827fe98cb06328d666300841a5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69931
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patches for kconfig need to be in a format compatible with the quilt
tool, and usually also contain a header with some additional info like
the git commit. This header is in the same format as patches produced by
`git format-patch`, but the diff style git uses is incompatible with
quilt and there does not seem to be a straightforward way to format the
diff section to work.
Add some documentation for a method I found to go from a git commit to a
quilt compatible patch with git headers.
Change-Id: I7a8bbe41e0864be1d28116742b6b8b3fc440cc31
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Adjust asserts to allow to store and compare (at S3 resume) hashes
without padding to maximum hash length / slot size.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: If6d46e0b58dbca86af56221b7ff2606ab2d1799a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Compilers are not optimizing-out code correctly. This patch fixes
incorrect behavior by splitting if statement and extracting code to
another function, this allowing for better code size optimization and
reduction of undefined references.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ia5330efeeb4cfd7477cf8f7f64c6abed68281e30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69761
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Modify USB2.0 port[4] settings to support camera.
BUG=b:238252678
BRANCH=firmware-brya-14505.B
TEST=with brask overlay changes, camera in camera app works
Change-Id: I42325b75e129429ee451ded6a2086fd3808e581a
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch ensures dropping of the duplicate macro introduced with
'commit 9e4488ab06 ("soc/intel/{adl,cmn}: Add/Remove LTR
disqualification for UFS")'
`PCH_PWRM_BASE_SIZE` macro represents the size of the PMC MMIO range
which can be used as is even in ufs.asl file.
BUG=b:252975357
TEST=Build and boot nirwen and see no issues in PLT runs.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic967c609e1330eca1b9e1143e7efd78db011f317
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70180
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
GSPI2 interface is not used on this mainboard and can be disabled. It
will in addition remove the warning of a leftover static device in the
log.
Change-Id: I6e7462312953d50385ca7bb2f2e0abb8fc3a5886
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Arthur Heymans