Commit Graph

216 Commits

Author SHA1 Message Date
Nico Huber 4f83d1b0c6 libpayload: ehci: Fix warnings about discarded volatile
We can trust free() and memset() to work correctly on volatile
references, so cast volatile pointers to (void *) when calling them.

Change-Id: Ieff7f78133b72f303349cca0a0ca3bbf37ec52bb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1896
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
2012-11-23 18:17:31 +01:00
Nico Huber ba22e4c3fd libpayload: Fix some missing-prototype warnings
usb_controller_initialize() is not declared in any header file nor
called from outside of usbinit.c, so make it static.

set_configuration() looks like beeing non-static on purpose (like the
other helpers around it in usb.c), so put a prototype into usb.h.

Change-Id: I08d93b3769d8398bb43462d9afdfeec81fef93ec
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1894
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-23 18:17:24 +01:00
Nico Huber 425973cf42 libpayload: Always use virtual pointers in struct sysinfo_t
We had mixed virtual and physical pointers in struct sysinfo_t. Some
being virtual by accident which led to problems when we tried to
reinitialize lib_sysinfo after relocating FILO (to get intentionally
virtual pointers valid again). I guess this didn't cause much trouble
before, as lib_get_sysinfo() was always called with physical addresses
being equal to their virtual counterparts.

For FILO, two possibilities seem practical: Either, have all pointers in
struct sysinfo_t physical, so relocation doesn't hurt. Or, have all
pointers virtual and call lib_get_sysinfo() again after relocation.

This patch goes the latter way, changing the following pointers for
situations where virtual pointers differ from physical:
  .extra_version
  .build
  .compile_time
  .compile_by
  .compile_host
  .compile_domain
  .compiler
  .linker
  .assembler
  .cb_version
  .vdat_addr
  .tstamp_table
  .cbmem_cons
  .mrc_cache
We could also just correct the accidentally virtual pointers. But, IMO,
this would lower the risk of future confusion.

Note 1: Looks like .version gets never set.

Note 2: .option_table and .framebuffer were virtual pointers but treated
        like physical ones. Even in FILO, this led to no problems as
        they were set before relocation.

Change-Id: I4c456f56f049d9f8fc40e62520b1d8ec3dad48f8
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1855
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-15 18:51:37 +01:00
Nico Huber 6e711c6a97 libpayload: Add init() function to hci_t and rework uhci_reset()
uhci_reset() differs in semantics compared to the other HCI's reset()
implementations. uhci_reset() does some initialization work after a
controller reset. So move the initialization part to a new function,
uhci_reinit(), which get's exported through a new entry in hci_t:
hci_t.init().

Warning: This breaks code that relies on the current, special,
counterintuitive behaviour of uhci_reset(). If one wants a working host
controller after calling hci_t.reset(), he should call hci_t.init()
afterwards.

Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1851
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14 17:45:16 +01:00
Nico Huber aaa212d17d libpayload: Do not call ohci_reset() from ohci_init()
When ohci_reset() was implemented, OHCI controllers stopped working
since the stub ohci_reset() is called at the end of ohci_init().
This is fixed by removing the call. To prevent further problems the call
to the xhci_reset() stub is removed, too.

Change-Id: If89825c8e6caf40f7f4fe078e8b2e90054a54ba2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1850
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14 17:44:36 +01:00
Nico Huber d633dda995 libpayload: Free usb host controller instance after shutdown
All shutdown() implementations but ehci_shutdown() free the hci_t
structure. This seems correct and the reference to the hci_t shouldn't
be used after shutdown(), so do it in ehci_shutdown(), too.

Change-Id: Ie3506d769e73007735f3211710734a5f0107e43a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1849
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14 17:44:15 +01:00
Patrick Georgi 45b94bc15f libpayload: Export device count in storage interface
FILO can use this as offset to enumerate AHCI and its own IDE
devices together.

Change-Id: I57380e7bd1df6db5c882427e9a34d068f4348fb2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1846
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14 17:39:03 +01:00
Gabe Black d94512edee libpayload: Add CB_ prefixes to some constants in coreboot_tables.h.
This makes their names more consistent with other constants in this header,
avoids name collisions, and makes it more obvious where the names came from.

Change-Id: I7b8bd4ada0fbaf049f35759a907281265f5bb2e6
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1729
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-09 22:54:04 +01:00
Anton Kochkov 2fef58eaba [PATCH] libpayload: Implement EHCI reset function
Added ehci_reset() function to do a full reset of
the host controller

Change-Id: Ia48db8462ebbb8f260813eb6ba8349d002c4678b
Signed-off-by: Anton Kochkov <a.kochkov@securitycode.ru>
Reviewed-on: http://review.coreboot.org/1814
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09 20:10:05 +01:00
Gabe Black 8e7d7fd4bf libpayload: Add a function to retrieve the rows and cols of the video console.
This is useful if you need to put some text in a particular place on the
screen, for instance in the middle.

Change-Id: I3dae6b62ca1917c5020ffa3e8115ea7e8e5c0643
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1734
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09 19:02:26 +01:00
Gabe Black dd9e4e58cd libpayload: Separate video initialization and the video console.
It's possible to want to display text on the display without using it as a
console. This change separates the initialization of the video code from
setting up the video console by pulling out everything but installing the
console into a new function called video_init.

Change-Id: Ie07654ca13f79489c0e9b3a4998b96f598ab8513
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1733
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09 19:02:11 +01:00
Gabe Black a54b6a6143 libpayload: Add support for the CBMEM in memory console.
Change-Id: I1489b5306ef1ca078686fed4dba2d242f70ad941
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1727
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-09 19:01:15 +01:00
Gabe Black 0af03d24f8 Refactor the endianness conversion functions and header files.
The endianness of an architecture is now set up automatically using Kconfig
and some common code. The available conversion functions were also expanded
to go to or from a particular endianness. Those use the abbreviation le or be
for little or big endian.

Built for Stumpy and saw coreinfo cbfs support work which uses network
byte order. Used the functions which convert to little endian to implement an
AHCI driver. The source arch is also little endian, so they were effectively
(and successfully) inert.

Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1719
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-08 19:49:51 +01:00
Gabe Black 93ded5905c libpayload: Turn the "debug" #define into the usb_debug static inline function.
The "debug" macro used internally in the libpayload USB subsystem was very
generically named and would leak into consumers of the library that included
usb.h directly or indirectly. This change turns that #define from a macro into
a static inline function to move away from the preprocessor, and also renames
it to usb_debug so it's less likely to collide with something unrelated.

Change-Id: I18717df111aa9671495f8a2a5bdb2c6311fa7acf
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1738
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
2012-11-07 18:38:37 +01:00
Gabe Black 8670b9b81a libpayload: Take usb_poll out of usb_initialize.
While it might be slightly more convenient to not have to call usb_poll
manually after calling usb_initialize, you'll still likely want to call it
before trying to use a USB device since one have have been hotplugged since
you last looked. By not calling usb_poll, usb_initialize completes quickly and
can be called unconditionally without a long delay. The delay can be put off
until later when we're sure it's necessary.

Change-Id: Ib8b1bdea996702c42d1b7021f492d9f8e174d304
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1737
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
2012-11-07 18:38:31 +01:00
Gabe Black 1b33c31cf3 libpayload: Make usb_initialize more efficient and fix style problems.
The usb_initialize function would scan for USB host controllers by brute force
iterating over all possible busses, devices, and functions. This change makes
it recursively scan busses only if it finds them on the other side of a bridge,
and only scan for functions beyond function 0 if the device claims to be
multifunction.

This change also takes the opportunity to clean up some style problems
throughout the file.

Change-Id: I0f5e8b9a454a42a76d30bccca898c8e1af770b2b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1736
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
2012-11-07 18:38:15 +01:00
Gabe Black 5ab20054d3 Update the way serial info is read from the coreboot tables.
This information is now stored in a structure instead of in a few seperate
fields. libpayload hadn't been updated to reflect the new layout or to consume
the new information intelligently.

Change-Id: Ice3486ffcdcdbe1f16f9c84515120c591d8dc882
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/1724
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
2012-11-07 18:30:40 +01:00
Nico Huber 1f6bd94fa8 libpayload: New AHCI, ATA and ATAPI drivers
This adds a new interface for storage devices. A driver for ATA and
ATAPI drives on AHCI host controllers comes along.

The interface is very simple and was designed to match FILO's needs.
It consists of three functions:

  void storage_initialize(void);
  Initializes controllers. Should be called once at startup.

  storage_poll_t storage_probe(size_t dev_num);
     with typedef enum {
            POLL_NO_DEVICE      = -2,
            POLL_ERROR          = -1,
            POLL_NO_MEDIUM      =  0,
            POLL_MEDIUM_PRESENT =  1,
          } storage_poll_t;
  Looks for a drive with number dev_num (drives are counted from
  zero) and polls for a medium in the drive if appropriate.

  int storage_read_blocks512(size_t dev_num,
                             u64 start, size_t count,
                             unsigned char *buf);
  Reads count blocks of 512 bytes from block start of drive dev_num
  into buf.

Change-Id: I1c85796b7f8e379ff3817a61b1837636b57e182b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27 02:52:58 +02:00
Patrick Georgi d357e62836 libpayload: CMOS access was implemented in a backward way
Instead of having the highlevel functions make use of the lowlevel
functions, it implemented the lowlevel stuff in terms of highlevel.

Change-Id: I530bfe3cbc6f57a6294d86fbf1739e06467a2318
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1539
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-14 20:12:11 +02:00
Anton Kochkov 93a8b27cbe libpayload: Set 8bits per char for serial port
Previously we assume that hardware using 8 bits
per char by default, but on Asrock A53 Pro
this is not true (7 bit per char by default).
Forcing use 8n1 now.

Change-Id: Ib701725d2ec6dacd7862016b2045270956b27029
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1541
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-10-03 09:27:20 +02:00
Patrick Georgi d2cb7ea1ff libpayload: UHCI driver contained too much magic
The handling of finalize in uhci_bulk was confusing, and so its
behaviour changed.
If set, the driver is supposed to add a trailing empty packet iff
the last packet is of maximum packet size. This helps the device to
decide if the transfer is completed simply by waiting for a packet
that isn't full length.

Change-Id: I162e8c1e034924d0de6fdcb971c94cf3a5ea31eb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/1555
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-10-03 09:25:25 +02:00
Anton Kochkov efcb8de12e libpayload: fix for UHCI bulk transactions
Fixed masking to run QH shedule.
Fixed final zero filled TD generation for
UHCI bulk transaction.

Change-Id: I9c6ea34d132368922f2eeeaa7aadbbb6aac3e2b8
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1553
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-01 22:57:01 +02:00
Patrick Georgi f78c7007c2 libpayload: fix fetching integers from CMOS as string
%ull -> %llu

Change-Id: I330f681d713be7eb444870f81330cf6e9869a4fa
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1542
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-28 14:49:33 +02:00
Patrick Georgi 08ed5a8697 libpayload: Extend CMOS access library
libpayload already contained a number of functions for convenient
access to CMOS configuration. Add functions to support iteration
over available enum fields.

Change-Id: If95f45d7223d2e19c42f1d8680c12d23f6890a01
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-26 20:51:32 +02:00
Anton Kochkov 1d66897364 Fix disconnect handling on UHCI root ports
Change-Id: I03b72cd1c6ed0df09c08f2a687d4f17fa3cf6afc
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1531
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-21 23:47:05 +02:00
Anton Kochkov f6c808090a UHCI: use proper pointer size
We used sizeof(listp*) at a place where sizeof(listp) is more appropriate:
While these are pointers, they're part of the UHCI design, and don't depend
on ISA details.

Change-Id: I4d3cb571c9a407103bc81fc171a8e73b68f7c7a1
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1530
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-09-21 23:46:23 +02:00
Anton Kochkov 1c36eada27 libpayload: add controller type in usbdev_hc
Add controller type (UHCI, OHCI, EHCI or XHCI)
into usbdev_hc (hci_t) struct, so now we know
which type selected controller have. It needed
to access controller specific data, if access
usb tree outside of libpayload (e.g. in payload
intself)

Change-Id: I7df947bbb56a50d0d792ccd4d3a6b021ee95e2ea
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1145
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-23 07:05:02 +02:00
Patrick Georgi 19e99f5cf1 libpayload: Fix typo
Change-Id: I8708703e497053aa1251f06402bd8ea59bd9d24e
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/1370
Tested-by: build bot (Jenkins)
Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-27 11:09:19 +02:00
Anton Kochkov db2c400ab8 libpayload: Add reset function for OHCI USB driver
Implemented OHCI reset function ohci_reset() in ohci.c
for libpayload's USB driver.

Change-Id: Id6518cbe00a21202757b34926bad171909740e97
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1177
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-12 10:00:17 +02:00
Anton Kochkov ac6e3172ff libpayload: OHCI driver correct PCI BAR reading
Correct registers base (PCI BAR) reading to be
more specification friendly. Registers base
only in [31-12] bits, all other proposed to be 0
but that not true for some motherboards. So
adding mask to use only valid bits.

Change-Id: I2e9a4997e016dab812ccfe654e966bc91d42a625
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1143
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-29 22:13:57 +02:00
Anton Kochkov 8fef662505 libpayload: use correct types in UHCI driver
As we using 16-bit reading and writing in UHCI drive,
so all variables related to that must be 16-bit too.

Change-Id: Ib1abb03d054c167512e21f24f3c3da688c7fd01f
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1144
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-29 22:12:25 +02:00
Nico Huber df28d9fe17 libpayload: Adjust timeouts and delays in OHCI driver
This sets the timeout for control and bulk transfers to 2s per
transfer descriptor (like we set it in the EHCI driver). It also adds
delays around the disabling of control and bulk list access to
overcome some race conditions.

Change-Id: Ia2d1db890fca51c7d9477de163d55030e0c5a04a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1127
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22 18:20:21 +02:00
Nico Huber d8a6680073 libpayload: Add check for failure in usb_attach_device()
This adds a simple check if a device is really configured before
returning it's address to the usb hub driver who wants to attach it.

Change-Id: I6fea140217c3e7468cc48ef7c3cbf2be8d11f47a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1131
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22 08:55:50 +02:00
Nico Huber 445a3a04d8 libpayload: Shutdown reasonably if we can't init usb msc device
This lets the init of usb mass storage return if the device
configuration is unusable. Also add some checks for proper shutdown so
we don't free/remove an uninitialized device.

Change-Id: I6daf9b38e632b6e381bcd5a7717f0f1a3150b64a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1130
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22 08:55:22 +02:00
Nico Huber 274c63e367 libpayload: Add support for interrupt transfers in OHCI
This adds support for usb interrupt transfers to the OHCI driver.
Basically this enables support for HID keyboard devices.

For each interrupt transfer endpoint, two queues of transfer
descriptors (TDs) are maintained: the first with initialized TDs
is linked to the periodic schedule of the host controller (HC), the
second holds processed TDs which will be polled by the usb class
driver. The HC moves processed TDs from its schedule to a done queue.
We periodically fetch all TDs from the done queue, to put them on the
queue associated with the endpoint, where they can be polled from.
Fully processed TDs (i.e. which have gone throuch all of this) will be
reinitialized and put on the first queue again.

Change-Id: Iaab72c04087b36c9f0f6e539e31b47060c190015
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1128
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2012-06-21 11:59:11 +02:00
Nico Huber 542fe85da9 libpayload: Fix initialization of OHCI driver
This fixes some memory corruption, leaking and padding issues within
the initialization of the OHCI driver.

Change-Id: If6891f2a53e339d32c4324f4c9e0b1ed07596a60
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1126
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2012-06-21 11:55:34 +02:00
Nico Huber 9951adeffd libpayload: Implement correct done queue processing for OHCI
This adds correct processing of the done queue of the OHCI host
controller (HC). We will always process the done queue after a control
or bulk transfer. Unfortunately, it's hard to tell when the HC will
write out the done queue, so we have do free the transfer descriptors
later and have to allocate them one by one.

To distinguish different types of TDs (e.g. async vs. interrupt
transfers) on the done queue, they are flagged in the lsb of there
.config field. We can utilize this bit for our own purpose, as it's
reserved and the host controller won't interpret it and preserves its
state.

Change-Id: I3b2271ae6221cdd50fc0f94582afdfe52bf7e797
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1125
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2012-06-21 11:55:10 +02:00
Nico Huber ac8d550854 libpayload: Correct interchanged parameters in OHCI driver
In ohci_private.h some invocations of a MASK macro were called with
its parameters interchanged. This fixes it with the hope not to break
anything nasty.

Change-Id: I56cb483b208442b497dbd32ce993cc53d1fba1e5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21 11:54:39 +02:00
Nico Huber 79e1f2fa01 libpayload: Detach unresponsive usb mass storage devices
This enables logical detachment of unresponsive usb devices (i.e.
devices not responding to control transfers) in the usb mass storage
driver. Without the detection of unresponsive devices we wait way too
long for the device to become ready.

Change-Id: I8b8cf327f49dde25afaca4d3066f16ea86b99d3d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21 11:54:23 +02:00
Nico Huber 3ca35cae35 libpayload: Add dummy queue heads to EHCI interrupt frame list
This introduces a dummy queue head in the interrupt frame list of the
EHCI host controller. It's a workaround for broken controllers which
follow pointers from this list even if the terminate bit is set.
Fortunately, they do honor the bit in queue heads and having an empty
QH in the list doesn't violate the standard.

The linux kernel has a similar workaround for AMD SB700, SB800, and
Hudson-2/3 platforms. We observed this bug with an AMD SB600.

Change-Id: Ibbb66dea5fddc89c7995a24d746bedf6bfa887be
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1124
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2012-06-21 11:53:25 +02:00
Nico Huber 0d120f8ee2 libpayload: Add interrupt-queue underrun recovery to EHCI
If the queue of an interrupt transfer runs out, we have to reset
the queue head. This also introduces the use of a spare transfer
descriptor (TD) in interrupt queues, which assures, that a processed
TD  won't be reused until the host controller has written it back
from his overlay.

Change-Id: Id0eeb2808b77f1c187f164eb34bd66f8f399938b
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1123
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2012-06-21 11:53:17 +02:00
Nico Huber cef86927e8 libpayload: Adjust timeout in EHCI driver
Tested with a bunch of usb flash sticks. The slowest non-TUR (test
unit ready) turn around took about 1.3s, so this commit increases the
timeout to 2s.

Change-Id: Iec64b5cc48d51912b2bdeeebb5885399a71311b2
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21 11:52:33 +02:00
Anton Kochkov 2e33a65a8c libpayload: reg_base reading for USB EHCI driver
Added reading registers base address for USB EHCI driver
in ehci_init() function.

Change-Id: I59443ca9823588d70822b4f14486caf217a5ac26
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1106
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-21 08:42:06 +02:00
Nico Huber 43b9f32d20 libpayload: Better error detection in USB mass storage
This implements status transport (CSW) more closely to the standard
(usbmassbulk_10).

Change-Id: Ife516316e054d4e87ebe698dc487eeb9ebcfd38d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1072
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
2012-06-20 19:47:07 +02:00
Anton Kochkov 421303a25a libpayload: Fix detach_contoller in the USB driver
Fixed usb controllers linked list walking in
detach_controller() function

Change-Id: Ia97c7ec814f75d2b1bfe185f160fb4cd32aa6fdb
Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com>
Reviewed-on: http://review.coreboot.org/1105
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-06-20 17:45:10 +02:00
Nico Huber bb1c42b920 libpayload: Add timeouts in the UHCI USB driver
We should always have some timeout when we wait for the hardware. This adds
missing timeouts to the UHCI driver.

Change-Id: Ic37b95ce12ff3ff5efe3e7ca346090946f6ee7de
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1073
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-09 13:13:08 +02:00
Nico Huber c43e736c0c libpayload: Fix an integer overflow in USB mass storage
Change-Id: I3d618497016478ea727c520e866d27dbc3ebf9af
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1070
Reviewed-by: Mathias Krause <minipli@googlemail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-09 13:11:36 +02:00
Nico Huber 0421dc84df libpayload: Add timeouts in the EHCI USB driver
We should always have some timeout when we wait for the hardware. This adds
missing timeouts to the EHCI driver.

Change-Id: I13ba532a6daf47510b16b8fdbe572a21f1d8b09c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1077
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-08 00:01:25 +02:00
Nico Huber afe86c0b74 libpayload: Add timeouts in the OHCI USB driver
We should always have some timeout when we wait for the hardware. This adds
missing timeouts and a more standard compliant port reset to the OHCI driver.

Change-Id: I2cfcb1039fd12f291e88dcb8b74d41cb5bb2315e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1076
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07 23:49:02 +02:00
Nico Huber 5e3428ea20 libpayload: Remove orphaned delay from OHCI USB driver
This removes a synthetic delay of 5ms from every OHCI USB command.  A delay
here seems to be of no use and first tests have shown no glitches.

Change-Id: Ie72b2d49e6734345708f04f3f7b86bacc7926108
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1075
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07 23:19:30 +02:00
Nico Huber 62eb5b3837 libpayload: Add support for interrupt transfers in EHCI
This adds support for usb interrupt transfers in the EHCI driver. Split
transactions are supported, so this enables support for HID keyboards
devices over hubs in high-speed mode.

Change-Id: I9eb08f12b12c67ece10814952cb8651278b02f9d
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1083
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07 23:16:35 +02:00
Nico Huber 4842dfe6f7 libpayload: Free intr queue structure in usb_hid_destroy
The call to destroy_intr_queue was missing in usb_hid_destroy.

Change-Id: I51ccc6a79bc005819317263be24a56c51acd5f55
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1082
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07 23:15:28 +02:00
Nico Huber 1ab6075320 libpayload: Add support for split transactions in EHCI
With split transactions, the EHCI host controller can handle full- and
low-speed devices on hubs in high-speed mode. This adds support for split
transactions for control and bulk transfers.

Change-Id: I30fa1ce25757f33b1e6ed34207949c9255f05d49
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1081
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07 23:14:18 +02:00
Nico Huber d5d024f3e5 libpayload: Bring USB hub driver to a working state
This adds proper device attachment and detachment detection and port enable-
ment to the USB hub driver. Support for split transactions is still missing,
so this works only with USB2.0 devices on hubs in USB2.0 mode and USB1.1
devices on hubs in USB1.1 mode.

Change-Id: I80bf03f3117116a60382b87a4f84366370649915
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07 23:12:44 +02:00
Nico Huber bdca15337b libpayload: Remove orphaned delay from USB mass storage
This removes a synthetic delay of 10ms from every mass storage command.
A delay here seems to be of no use and first tests have only shown a
huge speed increase.

Change-Id: Ida7423229373ec521d4326c5467a3f518b76149c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1071
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01 12:26:31 +02:00
Nico Huber 14f61424d0 libpayload: Disable some buggy debugging code
This disables some debugging code in the OHCI USB driver which causes
reboots under rare circumstances.

Change-Id: Ic274c162846137ee00638ffbc59ccf1d8130586f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1074
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01 12:24:17 +02:00
Mathias Krause e28a61550c libpayload: fix OHCI IN commands
Due to operator precedence incomming USB commands were missing some
flags.

Change-Id: I87ef51590c9db7a6cbc7304e1ccac29895f8a51e
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/1084
Reviewed-by: Mathias Krause <minipli@googlemail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01 12:23:04 +02:00
Mathias Krause 7b7b5666f0 libpayload: fix UHCI timeout
UHCI commands should have a timeout of 30ms, not 30s!

Change-Id: Iebcf338317164eb1e683e1de850ffab5022ca3a1
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/1085
Reviewed-by: Mathias Krause <minipli@googlemail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01 12:22:38 +02:00
Nico Huber 5c4e7aa9e5 libpayload: Correct port power settings for EHCI root hub
Enable power on EHCI root hub ports only if the controller supports it.
Wait 20ms for the power to become stable.

Change-Id: I8897756ed2bfcb88408fe5e9f9e3f8af5dd900ac
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1078
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01 12:22:08 +02:00
Nico Huber 5f595cb6eb libpayload: Add clear_feature() function to USB framework
This function will be used by the USB hub driver.

Change-Id: I4d1d2e94f4442cbb636ae989e8ffd543181c4357
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1079
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01 12:21:14 +02:00
Nico Huber cefec0ea8c libpayload: Fix b0b4a52b70
The removal of bitfields came with some glitches in the UHCI driver. This
fixes it.

Change-Id: Iba8ea3b56b03c526eca7b6388c019568e00be6f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1069
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-31 18:43:29 +02:00
Mathias Krause 0864016b0d libpayload: fix compile error with enabled USB_DEBUG
Commit c4348d0 ("libpayload: Remove bitfield use from OHCI data
structures") missed to adapt a debug message. This patch fixes this.

Change-Id: I5f6a4be9c7f6f99cb103926772717e15a3cbca70
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/653
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-20 21:46:32 +01:00
Mathias Krause d6a6eefebe libpayload: enforce const correctness for CMOS getter/setter
Input only arguments to {get,set}_option*() should be const to catch
programming errors early.

Change-Id: I560001a8e9226dfd156a4e529fcad20549236ebd
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/652
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17 19:26:59 +01:00
Mathias Krause 632ab1ff65 libpayload: fix compiler warning for first_cmos_entry()
The 'name' argument to lookup_cmos_entry() is declared to be 'char *'
but we pass an empty string ("") which is 'const char[]' so the compiler
legitimatly warns about discarded qualifiers here. Fix this by passing
NULL as 'name'.

Minor nitpick: The NULL test in lookup_cmos_entry() is superfluous as our
implementation of strnlen() can handle NULL pointers gracefully. But for
an average C hacker it just doesn't feel right not to do so.

Change-Id: I592917d12d8fa840804c0d19e38b844427064fef
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/651
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17 19:24:11 +01:00
Mathias Krause 50759ed4ff libpayload: code cosmetics
Be consistend with coding style at least within a function -- don't mix
sizeof with plain values.

Change-Id: Iefb5b7fe4f54977f5505fc9cea65c9c4af3e7f3a
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/617
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13 21:54:21 +01:00
Mathias Krause 9a4114a15a libpayload: fix possible mem leak in get_option_as_string()
Change-Id: I7c3adbd1b72be81585bbaabb42532fc4cad57f58
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/616
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 15:15:01 +01:00
Patrick Georgi 7627f7f22d libpayload: Remove workaround for bitfield management in EHCI driver
We don't use bitfields anymore.

Change-Id: I25ceec2024f659612871bcfe5f98df3a10789055
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/595
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07 18:30:44 +01:00
Patrick Georgi 2fd524297e libpayload: Force checking all EHCI ports on power-on
EHCI port status reporting isn't very consistent on power-on,
so just looking for devices on all ports is the safest way to
find everything.

Change-Id: I26b4305016f0bed1d2c1b5cffc59d5813fa1cbbb
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/594
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07 18:30:35 +01:00
Patrick Georgi 3e0bd19026 libpayload: Fix EHCI driver
When converting EHCI to not use bitfields, two offsets were converted
incorrectly.

Change-Id: I0bb4bad0eee42e54ad4fd53d6c35b107e227c41a
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/593
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07 00:16:12 +01:00
Patrick Georgi 0a59511108 libpayload: Add iterators for CMOS variables
Provide functions that pick the first CMOS variable defined
in the cmos layout, and from there, the next one.

Change-Id: Ie98146de7f6273089fc6fc0b232a4b94337cf8a3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/587
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03 13:22:48 +01:00
Patrick Georgi 56f468d29b libpayload: Expose options_checksum_valid
options_checksum_valid can be used as a fast test to
identify invalid CMOS data by checking the checksum.

Change-Id: I44635d4c5d389579ad82435907ba8658e1bd44bb
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/586
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03 13:22:20 +01:00
Patrick Georgi da59f9a8fb libpayload: Provide interpretation of CMOS data structures
Add new functions that allow using string based key/value access to
CMOS, including support for enums.

Change-Id: Ibe238eff4c5230e5f61004c88221cd34393873aa
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/585
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-03 13:21:57 +01:00
Patrick Georgi 5febb00640 libpayload: Add access to CMOS images in memory space
Provide access to CMOS images in RAM or CBFS, such as cmos.defaults

Change-Id: Ifa70dea6206d94c0c271caf9ae1152fc76b5d51a
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02 17:48:05 +01:00
Patrick Georgi 317ca0d751 libpayload: Refactor highlevel CMOS access
This will allow using libpayload functions to access CMOS data in
template files in RAM or CBFS.

Change-Id: I323ed625e657cbdc1fae8c279a82ee578e83ad00
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/583
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-02 15:48:27 +01:00
Patrick Georgi db89ec975c libpayload: style: compare null-pointers with NULL, not 0
Change-Id: I5efbfb75e2894bc8d8e50c8737cfee9738d15eda
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/551
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-18 14:00:05 +01:00
Patrick Georgi 8fa2787a0d libpayload: Remove bitfield use from EHCI data structures
We agreed that bitfields are a Bad Idea[tm].

Change-Id: If4c4cb748af340e2721b89fea8e035da0632971f
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/480
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-10 00:04:30 +01:00
Patrick Georgi b0b4a52b70 libpayload: Remove bitfield use from UHCI data structures
We agreed that bitfields are a Bad Idea[tm].

Change-Id: I1b2bcda28c52ad10bbe9429e04d126b555f7828a
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/478
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-10 00:02:54 +01:00
Patrick Georgi c4348d0a44 libpayload: Remove bitfield use from OHCI data structures
We agreed that bitfields are a Bad Idea[tm].

Change-Id: Ic04f151091c359912835b8b3db488d2d41bd4bbb
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/479
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-01-10 00:02:45 +01:00
Patrick Georgi f42fdabe65 libpayload: remove uhci_reg_maskX
Not that good an idea to start with.

Coccinelle patch:
@@
@@
-void
(
-uhci_reg_mask8
|
-uhci_reg_mask16
|
-uhci_reg_mask32
)
- (...) { ... }

@@
@@
-void
(
-uhci_reg_mask8
|
-uhci_reg_mask16
|
-uhci_reg_mask32
)
- (...);

@@
expression ctrl, reg, ormask;
@@
-uhci_reg_mask32 (ctrl, reg, ~0, ormask)
+uhci_reg_write32 (ctrl, reg, uhci_reg_read32 (ctrl, reg) | ormask)

@@
expression ctrl, reg, ormask;
@@
-uhci_reg_mask16 (ctrl, reg, ~0, ormask)
+uhci_reg_write16 (ctrl, reg, uhci_reg_read16 (ctrl, reg) | ormask)

@@
expression ctrl, reg, ormask;
@@
-uhci_reg_mask8 (ctrl, reg, ~0, ormask)
+uhci_reg_write8 (ctrl, reg, uhci_reg_read8 (ctrl, reg) | ormask)

@@
expression ctrl, reg, andmask;
@@
-uhci_reg_mask32 (ctrl, reg, andmask, 0)
+uhci_reg_write32 (ctrl, reg, uhci_reg_read32 (ctrl, reg) & andmask)

@@
expression ctrl, reg, andmask;
@@
-uhci_reg_mask16 (ctrl, reg, andmask, 0)
+uhci_reg_write16 (ctrl, reg, uhci_reg_read16 (ctrl, reg) & andmask)

@@
expression ctrl, reg, andmask;
@@
-uhci_reg_mask16 (ctrl, reg, andmask, 0)
+uhci_reg_write16 (ctrl, reg, uhci_reg_read16 (ctrl, reg) & andmask)

Change-Id: Id0eb8327293831e54249d43fd06d50963c793699
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/477
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-24 12:05:36 +01:00
Patrick Georgi dbde809558 libpayload: add set_option() function
It allows to change CMOS values from payloads

Change-Id: I4872fc27476923adafe13504126235b92b30de85
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/445
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-13 23:22:26 +01:00
Patrick Georgi 583abc2eb2 libpayload: Fix handling of CAPS LOCK key on PS/2 keyboards
The PS/2 keyboard driver set and reset the caps LED to show the
keyboard status. Unfortunately, that configuration happens over
the same path used to transmit keypresses.

In face of certain error conditions, the keyboard stopped working.
This change makes keyboard handling more robust.

Change-Id: I0489a9983ea7dab00357220e09398dd1a8538839
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/430
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-10 17:51:53 +01:00
Patrick Georgi bbc523146c libpayload: Implement usb_exit
So far it was empty and never published. It now exists and shuts down
all controllers (esp. EHCI which resets the port routers).

Change-Id: I81e355e8a05778d6397675417b085a094a6f48ee
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/397
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-04 22:14:29 +01:00
Patrick Georgi 01178bb03b libpayload: Tell EHCI to re-enable USB1 controllers
EHCI can take over all ports (and then reroute devices to
companion controllers if needs be). We do that, and then never
reset it.

Consequence:
Systems with only USB1 HC drivers (OHCI/UHCI) never see any devices.

Change-Id: If1d91e9142a6618289b0b3f6b56587ec857158e3
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/396
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2011-11-04 22:13:39 +01:00
Patrick Georgi 2e768e7f17 libpayload: Drop usb_fatal()
We have fatal(), which is just as good.

Coccinelle script:
  @@
  expression E;
  @@
  -usb_fatal(E)
  +fatal(E)

Change-Id: Iabecbcc7d068cc0f82687bf51d89c2626642cd86
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/395
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2011-11-04 22:11:05 +01:00
Mathias Krause c4716b4ebf libpayload: Reduce verbosity in USB stack
The USB stack is pretty noisy. Reduce the output to a sane level.

Change-Id: I250949e5cf74a8c6d43822b2e7487143b2ae1c65
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Reviewed-on: http://review.coreboot.org/393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-03 19:14:26 +01:00
Patrick Georgi dd69063289 libpayload: Fix OHCI some more
OHCI works when USB_DEBUG is disabled, but not, when disabled.
This is because the controller requires some more time after a
schedule has finished.

Also improve compliance with the OHCI spec.

Change-Id: I4685cc485ff9c52b489fbaa352ab889671cff876
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/365
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-11-01 19:07:47 +01:00
Stefan Reinauer bbfc9c449f Fix libpayload speaker driver
The frequency for the PC speaker has to be specified as
1193180 / frequency according to http://wiki.osdev.org/PC_Speaker

Change-Id: Iaca9d45807e080efe834611e719b350680b5fb90
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/337
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-27 10:49:41 +02:00
Stefan Reinauer d7ecfa7c15 Fix CMOS checksum calculation in libpayload.
Change-Id: I64ea53fa098fbcfc76e0ebd5f049a2ee3d0a1024
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/314
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-22 18:41:32 +02:00
Patrick Georgi eb7a900f63 libpayload: fix bulk transfers on OHCI controllers
Time for the brown paper bag: OHCI controllers are not happy when
told to send data, but with obviously wrong addresses. It helps
to write the addresses into the data structures.

Change-Id: Ic0967dc8939e64af119cfb89400a045a2c077171
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/306
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-21 17:05:48 +02:00
Patrick Georgi c230058199 libpayload: Add get_option_from()
This function allows reading the nvram configuration table from
locations other than the cbtable.

Change-Id: I56c9973a9ea45ad7bf0185b70d11c9ce5d0e0e1b
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/213
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-14 07:42:20 +02:00
Patrick Georgi 8bbdb61113 libpayload: EHCI registers are volatile
Some gcc versions seem to honor volatile at different places in a
struct declaration.

Change-Id: I0df2a3fb2eff4cee8cc1b8ac15d9cd9b86178752
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/155
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-08-16 21:56:32 +02:00
Steven A. Falco 4c514aedd8 port_enable and port_reset must change atomically.
I have observed two separate EHCI host bridges that do not tolerate
using C bit-fields to directly manipulate the portsc_t register.  The
reason for this is that the EHCI spec says that port_enable must go
to 0 at the time that port_reset goes to 1.  Naturally this cannot be
done using direct bit-field manipulation.  Instead, we use a temporary
variable, change the bit-fields there, then atomically write the new
value back to the hardware.

Signed-off-by: Steven A. Falco <sfalco@coincident.com>
Change-Id: If138faee43e0293efa203b86f7893fdf1e811269
Reviewed-on: http://review.coreboot.org/101
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-17 10:22:23 +02:00
Steven A. Falco 25f23f17bc Print a warning when an unknow USB controller type is detected.
The Intel E6XX Atom processor reports an unknown USB controller type (in
addition to the standard EHCI and OHCI ones).  Add a default case to
print a warning when an unknown controller type is detected.

Change-Id: I885d0ccec4c46fd212cceac599290e9bf85edbbb
Signed-off-by: Steven A. Falco <sfalco@coincident.com>
Reviewed-on: http://review.coreboot.org/100
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-14 08:00:30 +02:00
Steven A. Falco 9229af963d EHCI driver missing bus_address assignment.
Other USB drivers set the bus_address field.  EHCI should do this too.

Signed-off-by: Steven A. Falco <sfalco@coincident.com>
Change-Id: Ic4274c6744951ef7fa0cb135caf8b9f177d8bcaf
Reviewed-on: http://review.coreboot.org/99
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-14 03:43:05 +02:00
Patrick Georgi 7f96583f0f Reduce warnings/errors in libpayload when using picky compiler options
The new build system uses quite a few more -W flags for the compiler by
default than the old one. And that's for the better.

Change-Id: Ia8e3d28fb35c56760c2bd0983046c7067e8c5dd6
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/72
Tested-by: build bot (Jenkins)
Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30 20:41:23 +02:00
Patrick Georgi b3db79e996 Use coreboot build system for libpayload, too.
This change makes building coreboot related projects more unified.

Change-Id: I0f1181e2fffde1e03675523f7dc9eef3119052c3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/71
Tested-by: build bot (Jenkins)
Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-06-30 20:40:10 +02:00
Stefan Reinauer 4e67731011 Allow libpayload to use an OXPCIe 952 card on systems without
onboard serial port                                                                                                                                                                                                                                                      
                                                                                                                                                                                                                                                                         
Signed-off-by: Stefan Reinauer <reinauer@google.com>                                                                                                                                                                                                                     
Acked-by:  Marc Jones <marcj303@gmail.com>                                                                                                                                                                                                                               



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6508 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-16 00:13:17 +00:00
Stefan Reinauer 528b43db32 coding style cosmetics.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6492 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14 19:52:04 +00:00
Patrick Georgi 7f43dc1060 Add an EHCI driver to libpayload's USB stack.
Interrupt transfer support is missing (ie. no keyboard),
bulk and control transfers work (ie. mass storage).

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25 17:01:13 +00:00
Jens Rottmann 4e1ac83bb6 The AMD CS5536's USB controllers are located at device 0F, functions 4
and 5.  They're not found if only function 0 is checked.  So if a device
exists at all, try all its functions.  usb_controller_initialize() will
silently skip all device classes != 0C03.

(changed to continue to use 32bit accesses -pg)

Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5774 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-03 14:54:50 +00:00