Matt DeVillier ea629fa8c4 Revert "soc/intel/skylake: Clean up SoC ASL code." ... This partially reverts commit a7b97510ae. For the internal eMMC to be used by Windows for installation, the CARD device and _RMV methods are required. Without them, Windows does not see/show the eMMC as a valid installation target. TEST: boot google/chell with Tianocore payload and install Windows 10 to the internal eMMC drive. Change-Id: I04819ff16ab4cb0d2ea6e1c7f47179f5dacb7cfd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22684 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>		2017-12-07 02:34:07 +00:00
..
acpi	Revert "soc/intel/skylake: Clean up SoC ASL code."	2017-12-07 02:34:07 +00:00
bootblock	soc/intel/skylake: Make use of common CSE code for skylake	2017-11-15 16:44:36 +00:00
include	soc/intel/skylake: Fix DSX_CFG macro name for AC_PRESENT	2017-12-05 18:06:48 +00:00
nhlt	soc/intel/kabylake: Add Dialog da7219 NHLT blob support	2017-11-07 23:37:01 +00:00
romstage	soc/intel/common/block: Add Intel common PMC controller support for KBL, APL	2017-12-02 03:20:07 +00:00
acpi.c	soc/intel: Enable ACPI DBG2 table generation	2017-11-15 16:07:21 +00:00
chip.c	intel/skylake: Use Sata related registers from devicetree	2017-10-14 00:25:08 +00:00
chip.h	soc/intel/skylake: Fix DSX_CFG macro name for AC_PRESENT	2017-12-05 18:06:48 +00:00
chip_fsp20.c	soc/intel/skylake: pass SataSpeedLimit param to FSP2	2017-10-22 01:58:22 +00:00
cpu.c	soc/intel/common/sgx: Define and use soc_fill_sgx_param()	2017-09-15 16:21:11 +00:00
elog.c	soc/intel/skylake: Probe XHCI for wake source for Internal PME	2017-10-19 00:43:45 +00:00
finalize.c	soc/intel/skylake: Set low maximum temperature threshold for Thermal Device	2017-11-30 16:27:12 +00:00
gpio.c	soc/intel/skylake: Use common/block/gpio	2017-10-02 22:32:33 +00:00
gspi.c	soc/intel/{cannonlake,skylake}: Add _soc_ prefix in spi soc routine	2017-11-11 18:19:31 +00:00
i2c.c	soc/intel/skylake: Update coding style for i2c	2017-11-04 00:30:38 +00:00
igd.c	security/vboot: Move vboot2 to security kconfig section	2017-10-22 02:14:46 +00:00
irq.c	soc/intel/skylake: Enable common LPC IP	2017-10-03 20:23:21 +00:00
Kconfig	soc/intel/skylake: Make use of Intel common DSP block	2017-11-28 20:29:36 +00:00
lockdown.c	soc/intel/skylake: Enable common LPC IP	2017-10-03 20:23:21 +00:00
lpc.c	soc/intel/skylake: Enable common LPC IP	2017-10-03 20:23:21 +00:00
Makefile.inc	soc/intel/common/block: Add Intel common PMC controller support for KBL, APL	2017-12-02 03:20:07 +00:00
me.c	soc/intel/skylake: Make use of common CSE code for skylake	2017-11-15 16:44:36 +00:00
memmap.c	soc/intel/skylake: Use EBDA structure to store soc reserve memory size	2017-10-19 17:36:06 +00:00
pch.c	soc/intel/skylake: Clean up code by using common FAST_SPI module	2017-05-02 18:26:07 +02:00
pei_data.c
pmc.c	soc/intel/common/block: Add Intel common PMC controller support for KBL, APL	2017-12-02 03:20:07 +00:00
pmutil.c	security/vboot: Move vboot2 to security kconfig section	2017-10-22 02:14:46 +00:00
reset.c	soc/intel/skylake: Add support in SKL for PMC common code	2017-10-05 21:11:39 +00:00
sd.c	soc/intel/skylake: Use SCS common code	2017-06-16 17:37:13 +02:00
smi.c	soc/intel/common: Clean up PMC library GPE handling API	2017-10-12 22:13:39 +00:00
smihandler.c	soc/intel/skylake: Define mask for SMI handlers that can be run in SCI mode	2017-10-19 00:43:34 +00:00
smmrelocate.c	soc/intel/skylake: Move UNCORE PRMRR base and mask defines.	2017-09-15 16:21:29 +00:00
spi.c	soc/intel/skylake: Make use of Intel SPI common block	2017-11-11 18:19:39 +00:00
systemagent.c	soc/intel/skylake: Move UNCORE PRMRR base and mask defines.	2017-09-15 16:21:29 +00:00
thermal.c	soc/intel/skylake: Set low maximum temperature threshold for Thermal Device	2017-11-30 16:27:12 +00:00
uart.c	soc/intel/skylake: Add support for all UART port index	2017-08-21 16:29:55 +00:00
uart_debug.c	soc/intel/skylake: Add support for all UART port index	2017-08-21 16:29:55 +00:00
vr_config.c	intel/skylake: Support for setting AC/DC loadline	2017-03-15 19:45:55 +01:00