The Flashmap (FMAP) was not clearly documented. The new flashmap.md
explains where to find more details about that and how / why it was used
in coreboot. Also explained what is FMD and how to use it (based on
original README.fmaptool).
BUG=None
TEST=None (only documentation)
Change-Id: Ia389e56c632096d7c905ed221fd4f140dec382e6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The value of "write protect" GPIO shall be read in depthcharge,
and the flag shall be set there instead.
BUG=b:124141368, b:124192753, chromium:1556855
TEST=Build locally
CQ-DEPEND=CL:1556855
BRANCH=none
Change-Id: I4d24a057b1385244a836a67c565ee6726a894fdc
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The "write protect" GPIO's cached value is never actually
read after entering depthcharge. Ensure the value from
get_write_protect_state() is being transferred accurately,
so that we may read this GPIO value in depthcharge without
resampling.
The cached value of the "recovery" GPIO is read only on certain
boards which have a physical recovery switch. Correct some of
the values sent to boards which presumably never read the
previously incorrect value. Most of these inaccuracies are from
non-inverted values on ACTIVE_LOW GPIOs.
BUG=b:124141368, b:124192753, chromium:950273
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ic17a98768703d7098480a9233b752fe5b201bd51
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
For Kukui CR50_IRQ pin, we're going to replace external pull-up with
internal pull-up. This change won't break older boards, so we can just
always do that when setting up GPIOs.
BUG=b:124821269
BRANCH=none
TEST=Waveform looks correct.
Change-Id: Ib1a90dce583a6aa0cec8ac8ba96d1362f50c16a8
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
ODM reported issues that some systems can't be shutdown to S5 very
occasionally.
ODM found issue is gone if they remove the WLAN card.
So, this change to disable WLAN before system enters S5.
This change is validated by ODM and it does help issue.
BUG=b:129377927
Change-Id: Ib8e81022b8c9b63bc75e5cc14121233222da7595
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32246
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Chen Wisley <wisley.chen@quantatw.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This check had very few false positives which were all easily resolved,
and it's unlikely that further false positives will become problematic
in the future. On the other hand, it does detect a very severe bug (when
you think you're using a Kconfig but you aren't due to a typo), so since
warnings are currently not very visible, let's turn this into an error
because the pros clearly outweigh the cons for that.
Change-Id: I897b5e13d3242fb77b69f0bd3585baa7476aa726
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32257
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use rst parser to convert the csv to markdown tables.
Change-Id: I7fd61bd7a4e8818901520311332ae4027e7a7d02
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Allow the use of CSV files if properly referenced from markdown.
Sphinx will parse the file and create a human readable table,
allowing easy integration of autogenerated files.
Change-Id: I6fa13acf67ff1c6c9e3985054405c5446808da03
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Describe the coreboot stages, given a short introduction what is done
and add a chart for coreboot's vs EDK II bootflow as well as the source
for the SVG.
TODO: Describe stages in detail in a separate commit.
Change-Id: I98cb61b1d0d29ac9d03f5ef3644d51a8e14bad74
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
- Now there is no need to additionally configure the FSP
before building;
- PEG works with high link speed 8 GT/s (Gen 3);
- external GPU supported, but dynamic switching between iGPU and PEG
is not yet supported.
Change-Id: Ie0f9db47c0b88052b090cba139f0ae821758935d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31949
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Our strtol() and strtoull() function contain almost exactly the same
code. This is a) bad in general and b) may cause the code to get out of
sync, such as it recently happened with CB:32029.
This patch changes strtol() to be based on strtoull() so that the main
parsing code exists only once, and also adds a strtoll() to round off
the library. Also fix the bounds imposed by strtoul() to be based on the
actual length of a 'long', not hardcoded to 32-bits (which is not
equivalent on all architectures).
Change-Id: I919c65a773cecdb11739c3f22dd0d182ed50c07f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Our current limits.h only provides (U)INT_MAX constants. This patch adds
most others expected by POSIX. Since some of these may be different
depending on architecture (e.g. 'long' is 32-bit on x86 and 64-bit on
arm64), provide a definition that will automatically figure out the
right value for the data model the compiler is using (as long as it's
using two's complement for signed integers, which I think we can assume
these days).
Change-Id: I1124a41279abd4f53d208270e392e590ca8eaada
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
New compilers are a little more stringent about defining the same
prototype more than once, so some of our CONFIG_LP_DEBUG_MALLOC wrappers
don't quite work the way they are written anymore. Also, several of the
printf()s weren't written 64-bit safe. And let's add some
double-evaluation safety while I'm here anyway... and I have no idea why
this ever depended on CONFIG_LP_USB, that just seems like a typo.
Change-Id: Ib54ebc3cfba99f372690365b78c7ceb372c0bd45
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/14921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
If the entire array is zero, then the length of the
longest zero run is the length of the array itself.
Found-by: Coverity Scan, CID 1229715
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Id23292087b14182448d70117915fb044e9c579f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This pin should be set to its alternative function SRCLKENA0 instead of
GPIO, so that SPM (a power management component of MT8183) can control
it.
BUG=b:113367227
BRANCH=none
TEST=1. Boot. Run 'powerinfo' in EC console and see power state in S0.
2. Run 'powerd_dbus_suspend --wakeup_timeout=10', and then
run 'powerinfo' in EC console and see power state in S3.
3. Wait until AP resume.
4. Run 'powerinfo' in EC console and see power state back to S0.
Change-Id: I0a7e34f95381dec17eb6d166d6552c12e021bd9a
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32120
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a fmd file for 16MiB fmap, so that we can support
both 16MiB / 32MiB SPI flash ROM chips.
BUG=b:129464811
TEST=build hatch firmware image with 16MiB fmap and
verify fmap is updated by 'fuility dump_fmap'
Change-Id: Ifc0103c7fd0d99439f40a31d23422401a6dce826
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Fill in the handle to cache entries of type 7 in the type 4 structure.
Tested on Intel Sandy Bridge (Lenovo T520).
All 3 caches are referenced.
Change-Id: Idf876b0c21c65f72a945d26c5898074b140763f8
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
The SMBIOS spec requires type 7 to be present.
Add the type 7 fields and enums for SMBIOS 3.1+ and fill it with the
"Deterministic Cache Parameters" as available on Intel and AMD.
As CPUID only provides partial information on caches, some fields are set to
unknown.
The following fields are supported:
* Cache Level
* Cache Size
* Cache Type
* Cache Ways of Associativity
Tested on Intel Sandy Bridge (Lenovo T520).
All 4 caches are displayed in dmidecode and show the correct information.
Change-Id: I80ed25b8f2c7b425136b2f0c755324a8f5d1636d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32131
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Add two functions to determine if CPU is made by a specific vendor.
Use Kconfig symbols to allow link time optimizations.
Change-Id: I1bd6c3b59cfd992f7ba507bc9f9269669920b24f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Julien Viard de Galbert <coreboot-review-ju@vdg.name>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Expose the Bluetooth BT_DISABLE_L signal in Hatch's devicetree,
on both USB2 port 5 and 10.
BUG=b:123293169
BRANCH=none
TEST=compiles, verified kernel is able to find the reset-gpio
Change-Id: I6e4d9786e44f12da71533b6740fdd390f3a57e40
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32216
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
libssl1.0-dev is no longer available:
- Update to libssl-dev
- Add libcrypto++-dev to provide additional crypto libraries not
available in libssl-dev.
Change-Id: Ie10e14ebf7ae849301302008ee6ffeec1f40ccab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
We decided to not care about compile-time errors. So drop the comment,
the code was updated already.
Change-Id: Ib115fa6e2c48bfde7f67c327d42b3fe0e7af8c1f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Check for CONFIG not IS_ENABLED, as we use the former now.
Change-Id: I7e1b67bc0894ca6f0149039054449656b58bcdd3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Cast cpu_khz to a 64 bit integer to prevent possible
integer overflow (the multiplication is currently done
using 32 bit math). Similar to 61dac13 (libpayload:
timer: cast cpu_khz to make sure 64bit math is used).
Found-by: Coverity Scan, CID 1261177
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Iadb0abb7c7cc078f31a6d88d971f5d1b8ac62a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
lsbpos and msbpos have incorrect behaviour when given 0.
lsbpos(0) returns 8, and msbpos(0) hangs. The latter is
because the check i >= 0 is always true for an unsigned
integer, causing it to loop indefinitely (this was flagged
by Coverity).
0 doesn't have a lsb or msb position, so we change both
functions to return -1 in this case to indicate an error.
The code already guards against calling these functions
with 0, but we make this more explicit to prevent errors
in the future.
Found-by: Coverity Scan, CID 1347356, 1347386
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ic5be50846cc545dcd48593e5ed3fd6068a6104cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If `gms == ARRAY_SIZE(gms_size_map)`, then we will have an
out of bounds read. Fix the check to exclude this case.
This was partially fixed in 04f68c1 (baytrail: fix range
check).
Found-by: Coverity Scan, CID 1229677 (OVERRUN)
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I8c8cd59df49beea066b46cde3cf00237816aff33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The dev pointers were being dereferenced before the null
check. Move the checks so they are done earlier.
Found-by: Coverity Scan, CID 1241851 (REVERSE_INULL)
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ie578787c3c26a1f3acb4567c135486667e88a888
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The SkipExtGfxScan option is defined in the device tree, but doesn`t
update the value in the UPD. It uses the default value - 0. This
means that the FSP will scan all external graphics devices, in spite
of the configuration in devicetree.cb for a specific board.
Patch updates SkipExtGfxScan options in UPD from devicetree.cb.
This change affects all boards with skl/kbl processor.
Change-Id: Ie88a41bdf31f7c3e88df6c70c82a1cbf866372c4
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
There is no device on I2C0 which requires a lower clock rate.
Change-Id: Iaf01be5ea4839c54eb2f0ba95bca272970c24bdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Set new tcc_offset value to 10 degree C. This configures the Thermal
Control Circuit (TCC) activation value to 90 degree C. It prevents
any abrupt thermal shutdown while running heavy workload. This helps
to take early thermal throttling action when CPU temperature goes
above 90 degree C.
Change-Id: Ica77264782b4a3f3e72e73e1b8cb8b2e464fb033
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a support melfas touch panel with i2c address:0x34.
BUG=b:122019253
TEST=tested with new melfas touch panel and worked
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I27f5c47517d093c819cbbbcdafd85d74145887e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32169
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove ITSS IPC restore for cannonlake, as it does not take effect
since the ITSS PCR registers are locked post FSP-S.
Change-Id: Ie39e0d43644cb7b03b6c3432f0965f1d76d1bc37
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Report unhandled TCO bits (previously dead code). This
finishes the work done in 3e3b858 (sb/intel/ibexpeak:
Update debug code to match other chips).
Found-by: Coverity Scan, CID 1229598 (DEADCODE)
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I65df8f3363c62b364e096368a36ba5e9e8894c13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32179
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The effect of pointer aliasing on writes is that any data on CPU
registers that has been resolved from (non-const and non-volatile)
memory objects has to be discarded and resolved. In other words, the
compiler assumes that a pointer that does not have an absolute value
at build-time, and is of type 'void *' or 'char *', may write over
any memory object.
Using a unique datatype for MMIO writes makes the pointer to _not_
qualify for pointer aliasing with any other objects in memory. This
avoid constantly resolving the PCI MMCONF address, which is a derived
value from a 'struct device *'.
Change-Id: Id112aa5e729ffd8015bb806786bdee38783b7ea9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31752
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support PCIe Gen 3 with 8GT/s link speed for PEG x16
slot. All parameters for FSP are set during initialization in
romstage. Now there is no need to additionally configure the FSP
before building the ROM image.
Tested on Intel Core i5-6600 processor with the following devices:
- LP11000e Fibre Channel HBA (Gen2 x8);
- PEX8734 PCIe Fabric/Switch (Gen3 x16);
- NVIDIA GeForce GTX 1060 GPU (Gen3 x16).
GPU works with an nouveau and proprietary driver under Ubuntu 18.04.2
(4.15.0-46-generic GNU/Linux kernel). Discrete graphic card is used
as primary device for display output. Dynamic switching is not yet
supported.
Tianocore (edk2-stable201811-216-g51be9d0) is used as the payload.
Change-Id: Ia4f29df47d76de5069fe53120434cc7c2ab6f044
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31948
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hung-Te Lin