* Change power sequence to make it closer to ov8856 sensor
data sheet version 2
* Handle different PWREN GPIO pins for up3 and up4
* Add link frequencies definitions to sensor side
* Clean up format
BUG=None
BRANCH=None
TEST=Build and boot TGLRVP U or Y. Start camera app and able to
capture images.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Ic11a36f1f82fe425c1a5796847ce020007064403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39529
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Method RAOW is assuming that the first argument is a Field object
and writing to it expecting the register to get updated. However,
the callers are passing in the value of the Field object instead.
This eventually is resulting the IMGCLK not getting enable/disabled on the
platform.
Fix this by sending the exact address of the register to be updated.
Also MCCT was setting the clock frequency in both case i.e, Clock Enable
and Disable. Split the MCCT method in two, MCON and MCOF to fix the sequencing
like below
MCON:
Set frequency
Enable clock
MCOF:
Disable clock
Also, make use of MCON and MCOF methods for camera clock control in tglrvp.
This is to avoid the buildbot marking the patch unstable.
BUG=None
BRANCH=None
TEST=Build and Boot waddledoo board and verified that IMGCLKOUT for
world facing camera is enabled/disabled and able to capture images.
Build and Boot Tiger Lake RVP board and verified that IMGCLKOUT for
world facing camera is enabled/disabled and able to capture images.
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I8b886255d5f38819502ae1f4af0851b5a0922b22
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39498
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tiger Lake Thunderbolt(TBT) has 4 PCIe root ports. Add those TBT
root port devices Id from EDS #575683.
BUG=None
TEST=built image and booted to kernel successfully.
Change-Id: Ia117d63daa15dfb21db28fd76723e97ab030da92
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39526
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set FSP params PchSirqEnable/PchSirqMode based on board
setting of serirq_mode. Matches implementation on Skylake.
This is a no-change for existing boards since the default
remains SERIRQ_QUIET mode.
Tested on system76 galp3-c, out-of-tree WHL-U board
Change-Id: I9ad4f5a6c7391fc6e813ec1306c708f449a69f59
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Nathaniel L Desimone <nathaniel.l.desimone@intel.com>
On a device/option-rom ID mismatch, the option rom's IDs would get
shown twice instead of showing the actual device's IDs. This was
very confusing because the error showed matching IDs.
BUG=None
TEST=Shows mismatched IDs when option rom doesn't match the hardware
Change-Id: I5a06d6a7319aa653c8a5e32ec3c5afb651d83140
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2013180
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Foob360 would prefer to use different SAR values. Since Foob360
sku id is 9.
BUG=b:149362272
BRANCH=octopus
TEST=build
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Function was copied as part of upstreaming from Chromium tree,
but isn't used and has never been used best I can tell.
Change-Id: I53b8702c97d7a694450aa05ba49da6c26c30f725
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These platforms use the standard fixed function power button
and do not need a second power button device declared or the
kernel will end up with two devices reporting the same event.
Same change was applied to all google mainboards in
CB:27272 which contains more detail.
Change-Id: I17c85e43493530d04f4fa13f33bec6d027cb3147
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39577
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a helper function memranges_is_empty() which returns
true if there are no entries in memranges.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: If841c42a9722cbc73ef321568928bc175bf88fd5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change adds memranges_steal() which allows the user
to steal memory from the list of available ranges by providing a set
of constraints (limit, size, alignment, tag). It tries to find the
first big enough range that can satisfy the constraints, creates a
hole as per the request and returns base of the stolen memory.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ibe9cfae18fc6101ab2e7e27233e45324c8117708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change enables memranges library to support addresses with
different alignments. Before this change, memranges library supported
aligning addresses to 4KiB only. Though this works for most cases, it
might not be the right alignment for every use case. Example: There
are some resource allocator changes coming up that require a different
alignment when handling the range list.
This change adds a align parameter to struct memranges that determines
the alignment of all range lists in that memrange. In order to
continue supporting current users of memranges, default alignment is
maintained as 4KiB.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1da0743ff89da734c9a0972e3c56d9f512b3d1e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BRANCH=none
BUG=b:145946347
TEST=boot to OS with TGL RVP UP3,
then copied ISH firmware to host file system /lib/firmware/intel/tglrvp_ish.bin
check "dmesg |grep ish", it shows:
ish-loader: ISH firmware intel/tglrvp_ish.bin loaded
cros_ec_ishtp: Chrome EC device registered
Those means shim loader in coreboot has loaded ISH firmware, and
firmware is running successfully.
Signed-off-by: Hu, Hebo <hebo.hu@intel.com>
Signed-off-by: li feng <li1.feng@intel.com>
Change-Id: I1ee8050aef6ec0828f16ef2695b5347278caa820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39481
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BRANCH=none
BUG=b:145946347
TEST==boot to OS with TGL RVP UP3
Signed-off-by: Hu, Hebo <hebo.hu@intel.com>
Signed-off-by: li feng <li1.feng@intel.com>
Change-Id: I3a4f73e82f62def3adb2cb1332a315366078c918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39478
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ACPI Object for ISH SSDT
Enable/disable ISH based on devicetree
BRANCH=none
BUG=b:145946347
TEST=boot to OS with TGL RVP UP3
Signed-off-by: Hu, Hebo <hebo.hu@intel.com>
Signed-off-by: li feng <li1.feng@intel.com>
Change-Id: I30f4d936ece139cf67640e6df6a9f47579f87bca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change PMC IPC HID from INT34D2 to INTC1026 along with
new kernel pmc ipc driver.
BUG=b:148949891
BRANCH=none
TEST=Boot on Volteer and validate DP tunneling.
Change-Id: I987e7bf76ad1f8ff534101c80661f7c027a60b51
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Use De Morgan’s law to simplify the condition by getting rid of the
negations.
TEST=With `make BUILD_TIMELESS=1` getac/p470 remains unchanged.
Change-Id: I041f2740d6991f9b4e6b8f77988b970c028ca512
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The X210 EC reports battery values in broken mAh. These have to be
adjusted by 10000 * DGVO, as documented in
https://github.com/torvalds/linux/blob/master/drivers/acpi/battery.c.
Taken from https://github.com/harrykipper/coreboot, commits
2f68f138adb25605e5715896636cf33f6de5bd95
c1c72cc43708a6647f263a767c39cf3072908e20
Change-Id: Ie097272443b18b16c3937034f874d3b5a6bdd62a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39142
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Add USB ports for SD card reader, fingerprint reader,
and internal port.
- Enable PcieRpClkReqSupport on NVMe root port,
correct values for ClkReq/ClkSrc.
- Improve comment for M.2-2230 USB port (BT)
Parts derived from x210_test branch of HarryKipper's repo:
https://github.com/harrykipper/coreboot
Change-Id: Ib64629ada4726e5edc080608f71a51f56a9b747c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems,
based on a modern Kabylake CPU. It also ships with no firmware protection,
(IFD is fully unlocked, no protected regions are set, no Bootguard),
making it an ideal coreboot target. This port is based on the support for
the Skylake-based Purism Librem 13v3, with the following significant
changes:
* EC firmware is contained within the system SPI flash, and so a blob of
EC firmware must be injected to a defined location during image build.
* GPIO layout is different - this is currently just a raw import of the
GPIO configuration from the vendor firmware
* The system has two DIMMs, so an additional SPD address has been added
* The USB port layout is different
* The EC must be enabled at boot time through SuperIO-style logical device
configuration
* EC register layout is different, necessitating changes in the ACPI tables
* The HDA pins are different
* The genx_dec config is different
All hardware appears to work as expected, although the SD reader is
untested.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add support for the NPCE985LA0DX, as used on the 51NB X210
(to be added in a follow-on commit, and from which this was extracted).
Original source: https://review.coreboot.org/c/coreboot/+/32531/37
Change-Id: I5798fad7fd18083cde1aa647fd91ca9c5ce963b7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is new Elan touch screen IC, which includes touch panel and USI pen.
BUG=b:151514167
TEST=build bios and verify touch screen works fine
Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com>
Change-Id: I98801b8c31812637f71d7eaaa0f12b47901dc47a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Now that SMMSTORE is implemented across all platforms that
Tianocore supports, default to selected so that NVRAM
functions and Tianocore setting saved as users expect.
Change-Id: I067e5faee73cba585a1123215ed2d80e3eaa7877
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Below changes are done:
1. Allow execution of HMRFPO_ENABLE command if CSE meets below
prerequisites:
- Current operation mode(COM) is Normal and Curret working state(CWS)
is Normal.
-(or) COM is Soft Temp Disable and CWS is Normal if ME's
Firmware SKU is Custom.
2. Check response status.
3. Add documentation for send_hmrfpo_enable_msg().
4. Rename padding field of hmrfpo_enable_resp to reserved.
The HMRFPO (Host ME Region Flash Protection Override) mode prevents CSE to
execute SPI I/O cycles to CSE region, and unlocks the CSE region to perform
updates to it. This command is only valid before EOP(End of Post).
For Custom SKU, follow below procedure to place CSE in HMRFPO mode:
1. Ensure CSE boots from BP1. When CSE boots from BP1, it will have
opmode Temp Disable Mode.
2. Send HMRFPO_ENABLE command to CSE. Then, CSE enters HMRFPO mode.
CSE Firmware Custom SKU Image Layout:
= [RO] + [RW + DATA PART] = [BP1] + [BP2 + DATA PART]
Here, BP1 will have reduced functionality of BP2, and the BP1 will be
CSE's RO partition and [BP2 + DATA PART] together will represent
CSE's RW partition. CSE can boot from either BP1(RO) or BP2(RW).
CSE Image Layout in Consumer SKU: BP2 + BP3 + DATA PART
TEST=Verfied on hatch board.
Change-Id: I7c87998fa105947e5ba4638a8e68625e46703448
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
- Reformat some lines of code
- Put names to all MCHBAR registers in a separate file
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
- Align a bunch of things
Tested with BUILD_TIMELESS=1, foxconn/d41s remains unaffected.
Change-Id: I29104b0c24d66c6f49844f99d62ec433bb31bdaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:
- Hillel: 32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics
This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.
Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is for Arrandale CPUs, whose System Agent is Ironlake.
This change simply replaces `nehalem` with `ironlake` and `NEHALEM`
with `IRONLAKE`. The remaining `Nehalem` cases are handled later, as
changing some of them would impact the resulting binary.
Tested with BUILD_TIMELESS=1 without adding the configuration options
into the binary, and packardbell/ms2290 does not change.
Change-Id: I8eb96eeb5e69f49150d47793b33e87b650c64acc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38941
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Store LID status into LIDS and change device name to LID0.
Then Intel driver can reference it.
BUG=b:151134069
TEST=check LID status by evtest
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifdac938730eac034b626aa8ad9d52462f65137ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Remove the switch case in spd_get_banks. The LPDDR4X adapt DDR4 attributes.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icfaefd1856d2350c6e5a91d233ccdb10d5259391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Check for dev enabled status for CNVi and update the
UPD accordingly.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add config to override CpuRatio or setting CpuRatio to
allowed maximum processor non-turbo ratio.
BUG=151175469
BRANCH=none
TEST=Build and boot tglrvp and observe there is no extra reset
in meminit.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Reformat some lines of code
- Put names to all used MCHBAR registers
- Move MCHBAR registers into a separate file, for future expansion
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
Tested, it does not change the binary of Asrock B85M Pro4.
Change-Id: I926289304acb834f9b13cd7902801798f8ee478a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38434
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Volteer uses 4 bits (hardware straps) to indicate what memory
configuration the board is populated with (i.e. which SPD file
to use for the populated memory). This allows for only 16
different SPDs for supporting Volteer and all future variants of
Volteer. Currently, each memory chip needs its own SPD file, so we
can only support 16 different memory chip options for Volteer and
all of its variants.
Generic SPD files are just SPD files that have been stripped down
to contain only fields that are important for the memory controller
(strips out items like vendor info, for example). Using generic SPD
files allows for more than 16 different memory options given it's no
longer a 1-to-1 mapping as similar memory modules from different
vendors can share the same generic SPD file.
BUG=b:147857288
TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and
verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB
of memory.
Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable the BT module in bootblock and enable it in ramstage. This
allows for loading the BT firmware during reboot.
TEST=Build and boot the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Daniel Kang