This implements the UART driver in SoC
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/25373/78
Change-Id: I6494daa108197c030577ac86dab71f9ca6c21bdb
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35500
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The frequency to be used by UART client is 7.3728MHz, thus define it in
the clock header to be used by the driver.
Tested: UART frequency request by client driver.
Change-Id: I1ced350fe9826ea05b03ffc11aced2c21fe85c9e
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Enable Wifi and Bluetooth for Jasper Lake RVP with following changes:
1. Enable related pci root ports for WLAN and BT
2. Disable unused root ports and clkreq for unused clocks
3. Configure GPIOs properly for M.2 port
BUG=None
BRANCH=None
TEST=Code compiles and able to detect Wifi/BT module on board.
Change-Id: Ifbd07022c05769c04ecd49c81a4430947125b32a
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39933
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
M.2 WWAN interface has GPIOs which requires coreboot to
configure all related GPIOs as per board schematics.
BUG=None
BRANCH=None
TEST=code compiles and WWAN device is detected in OS
Change-Id: I8ad978a619b50e16ad754177f1eb05cf7670b79f
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Each physical port should have the same group and position for both USB2
and USB3, but puff and its variants use different layout than the
baseboard so they must override PLD.
Ports are split into two groups for front and back, with positions in
each group numbered from left to right.
BUG=b:151579409
BRANCH=none
TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT.
Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Query the EC to get the top row layout, and if it provides one,
generate the SSDT for the PS2 keyboard.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I75d2eee32c82b9bee73436b08b5f615d1b388148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40032
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a wrapper command for the subject command
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I29a4021c2ea0d1cbb4a72f56bf2232d8f9c80ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add new file to generate ACPI _DSD code for PS2 keyboards. The
following 2 device properties are generated as needed:
function-row-phymap: A list of ordered scancodes for function row.
linux,keymap: Symantically, this is an array of "scancode,keycode"
tuple entries. Each entry teaches linux the keycode corresponding
to a scancode.
Signed-off-by: Rajat Jain <rajatja@google.com>
Change-Id: I5ee05173106a125793e91c263610731543c85472
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
`lib_sysinfo->serial` is a virtual pointer into coreboot tables.
It's not valid across relocation. Accessing the wrong value during
relocation of FILO resulted in a hang with DEBUG_SEGMENT and UART
console enabled. Work around that by caching the whole table entry
locally.
An alternative would be to revise `sysinfo`, to contain no virtual
pointers to anything outside the payload.
Change-Id: I03adaf57b83a177316d7778f7e06df8eb6f9158e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reto Buerki <reet@codelabs.ch>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There have been two cases of incompatibilities between overlapping
changes, and they need to be resolved in a single commit to unbreak the
tree:
1. CB:40389 introduced a new use of write_secdata while CB:40359 removed
that function in favor of safe_write.
Follow the refactor of the latter in the code introduced by the former.
2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface
and adapted all its users. Except for duffy and kaisa which were only
added in CB:40223 and CB:40393 respectively, so reapply the patch to
puff's mainboard.c to their mainboard.c files.
Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch adds psys_pmax calculation. There are two types of power
sources. One is barrel jack and the other is USB TYPE-C. The voltage
level is fixed for a barrel jack while TYPE-C may vary depending
on power ratings. We need to get voltage information from
EC and calculate correct psys_pmax value. The psys_pmax needs to be
set before FSP-S since FSP-S will handle the setting passing to pcode,
so move the routine ahead to variant_ramstage_init.
BUG=b:151972149
TEST=emerge-puff coreboot chromeos-bootimage
check firmware log and ensure psys_pmax is passed to FSP
check the data from dump_intel_rapl_consumption in the OS and
ensure the power data is close to an external power meter.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Remove entries for old utilities and add entries for new ones.
Generated using util/util_readme, with some tweaks to preserve the
markdown.
Change-Id: I3a4d8a6bf15a677aa07aa72b8809328110fb72da
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is a micro ATX board with a LGA1155 socket and two DDR3 DIMM slots.
Porting was done using autoport and then doing a bunch of manual edits.
Actually, I have the PLUS variant, but they use the same PCB. The only
difference is the capacitor quality.
Working:
- Both DIMM slots
- PS/2 keyboard
- S3 suspend/resume
- Rear USB ports
- Integrated graphics (libgfxinit)
- VGA
- All PCIe ports
- Realtek GbE (coreboot must set the MAC address)
- SATA ports
- Native raminit
- Flashing with flashrom
- Rear audio output
- VBT
- Arch Linux using CorebootPayloadPkg
Untested:
- PS/2 mouse
- The other audio jacks
- EHCI debug
- Front USB headers
- Non-Linux OSes
Change-Id: I385ee72673202d896041209ff2911995307cb6af
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Update memory topology for spd info. Deltan supports SODIMM and
Deltaur supports MEMORYDOWN.
BUG=b:151702387
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If314894325d6f222807030a36f8c4cefecfe5bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Later EliteBooks use different EC chips and have different EC firmware
interfaces, so rename the document elitebook_series.md to a more
precise name and also do some rewriting.
A link to the code review page for 8760w is also added because the
port for this laptop is not merged yet.
Change-Id: I2f9b8c4e52ed760c16977d16838cca9e490cda05
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch adds voltage and curent parameters in
google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could
use the voltage and current information to calculate charger power rating.
The reason for this change is, some applications need the voltage information
to calculate correct system power eg PsysPmax.
BUG=b:151972149
TEST=emerge-puff coreboot; emerge-fizz coreboot
Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Remove explicit setting of iDisp Link parameters. These settings are
related to configuration for the link between HD-Audio controller and
Display unit for purposes of HDMI/DP Audio playback. During PO,
observed that without setting these params display part was not
binding. With the latest code verified that we dont need to explicitly
set these parameters anymore. HDMI/DP audio playback works fine with
default settings.
BUG=b:151451125
BRANCH:none
TEST= build and boot volteer/ripto and verify HDMI/DP audio playback
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jairaj Arava <jairaj.arava@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Changing the local pointer "start" has no effect.
Changing the value it points to has.
Change-Id: I1b689896fcf255b795b27d7a7163849d6dfdb00e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
All variants will use the same lid/thermal-polarity config as a result,
which looks the same for all recently boot-tested variants anyway.
Change-Id: Iaaae4eae41ab0037e72375b255d9d1c3eca8d383
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39905
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
H1 uses I2C3 in the HW schematics and connects to GPP_H6 and GPP_H7.
Previous setting was wrong so correct it.
BUG=b:150165131
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I43c18baea66b927d51689579a40a53f72b94ef36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40487
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds _DSM Method in LPIT table for entering and exiting
S0ix. This method get injected into DSDT table and called from kernel.
LPIT table is hardcoded in this patch but the proper way to implement
is to use inject_dsdt to make the _DSM methods available for soc's to
implement.
Calling the LPIT table from mainboard here so that with the current
implementation the platforms which do not have lpit support throw
compilation error.
BUG=b:148892882
BRANCH=none
TEST="BUILD"
Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com>
Change-Id: Ib58f2e33a33bac9cc5f6aca28e85a8066413a5cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com>
Disable dynamic clock gating for the community cr50's IRQ lives on.
That IRQ is pulsed very quickly, and with clock gating enabled pulses
tend to be missed. This is expecially true on the default 0.0.22
firmware that cr50 comes with out of the factory.
BUG=b:154178408 b:154293730
BRANCH=None
TEST=build waddledoo successful and Linux has no TPM IRQ timeout error.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I2b1b3ee59ebf6adce0653e7550b457e02d3c87df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Configure DRAM population strap GPIO according to the schematics.
Configure an internal pull-up to support the boards in which the strap
is not populated. Read the strap and pass that information to FSP for
memory initialization.
BUG=b:152275658, b:154301008
TEST=Build and boot the mainboard. Ensure that the strap information is
read as expected and passed to FSP.
Change-Id: I69583f35ffc219bae9ce06bd4ba9898ed0d4d21d
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39812
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original AMD_PLATFORM_MOBILE is incorrect because this board is a desktop one.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I02adedffe8624c38e7b93fadd0449ddf094388fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33919
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Looks like the guard was dropped by mistake.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ie73c4d6cb557820ae7427fef15ca8110722c5b68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33916
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These comments exist in other buildOpts.c files, but not in this one.
Tested with BUILD_TIMELESS=1, hashes do not change.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ic0aab06f1956bc0bf9f96d6176643c113a1e4cc5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
This makes it easier to know which files are being included.
Tested with BUILD_TIMELESS=1, hashes do not change.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: Ic096848f23910e2ad9183e44d882450ab8d4fdf1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reorder lines to make it more similar to buildOpts.c of Lenovo G505S.
This improves diff results, which is convenient for debugging.
Tested with BUILD_TIMELESS=1, hashes do not change.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I1674252fab2fc6fbf9be2b37e97a6f5ff97a04b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33913
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update device enable/disable based on PCH EDS#576591 vol1 rev1.2
BRANCH=none
BUG=b:154037185
TEST= boot up OS in volteer and check and check lspci
Unsupported IP should be visable from lspci result
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I61a328da1014ab7584c3ec789971a106c7a0a403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40394
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For bit fields with 31 bits (e.g: DEFINE_BITFIELD(MYREG, 30, 0) ),
the calculation of mask value will go overflow:
"error: integer overflow in expression '-2147483648 - 1' of
type 'int' results in '2147483647'".
And for bit fields with 32 bits (e.g: DEFINE_BITFIELD(MYREG, 31, 0) ),
the error will be:
"error: left shift count >= width of type [-Werror=shift-count-overflow]"
To fix these issues, the bit field macros should always use unsigned
integers, and use 64bit integer when creating mask value.
Change-Id: Ie3cddf9df60b83de4e21243bfde6b79729fb06ef
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The samsung-K4U6E3S4AA-MGCL.spd.hex is not used and planed by anyone
yet. On the other hand, the spd content is not correct based on JSL
spec as well.
BUG=b:153426401
TEST=build waddledoo and waddledee successfully.
Change-Id: If71e3ef2e3385378633549bf8709a1cd6ecc0dd3
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
CB:29744 ("util/cbfstool: Add optional argument ibb") added support
for non-ASCII characters for long_options. However, there is a check
later on which errors out since this character is not one of the
commands[i].optstring.
This change adds a function valid_opt() which does the following
things:
1. Checks if the returned optchar is among the list of optstring
supported by the command.
2. Checks if the returned optchar is a valid non-ASCII
option. Currently, we do not maintain a list of non-ASCII options
supported by each command. So, this function returns true if the
optchar returned by getopt_long falls within the allowed range.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I27a4f9af9850e4c892573202904fa9e5fbb64df6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change updates FMAP_FMAP_SIZE for non-x86 boards using default
fmd file to be 0x200 just like for x86 boards.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f58696b26fbb5363d67bec4056653da83485776
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When using default fmd files, base of the fmap region is currently
calculated based on the size and base of previous fmap regions. Since
the existence of any fmap region is dependent on the selection of
certain CONFIG_* parameters, these calculations get complicated. Every
time base is calculated for a region, there need to be checks to see
which of the previous regions really exist. As the regions in default
fmd file are increased, these calculations and the conditional checks
get even more complicated.
This change introduces a Makefile variable FMAP_CURRENT_BASE which is
updated every time a new region is allocated space. This allows using
the same steps for determining the base of any fmap region
irrespective of the state of previous regions.
The way the code is organized it should be possible in the future to
also add a macro to perform the same steps (in case that is possible).
TEST=Verified that coreboot image generated remains unchanged for x86
and ARM boards using the default fmd files.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I2a109462928b6e8b7930bbcc1a1ba45fa85de6ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Depthcharge trusts that our TPM driver is working reliably,
and so should we. Also remove CRC check -- the value returned
by antirollback_read_space_firmware() is dropped in vboot_logic.c
verstage_main(), and vboot handles this check internally.
BUG=b:124141368, chromium:972956
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I5d3f3823fca8507fd58087bb0f7b78cfa49417ab
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
These constants were left behind after the code using them
was relocated in CB:34510.
BUG=b:124141368, chromium:972956
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I6ce7c969a9e9bdf6cdce3343ba666a08b3521f27
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia354702c8054b5826d45896f7bff268335726028
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Modify stop_delay as 115ms to waiting for Melfas device I2C interface
ready after touch fw auto update and rebind driver.
BUG=b:153708773
BRANCH=drallion
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ib392190d2b4188ee228d8ca4873e03176d2f127f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40357
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is not necessary to pass its value around various function calls.
Move it closer to where it is actually used, so as to make it static.
Also, use config_of_soc and flip the branches of the first conditional.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I5c49c943c87218d4d40d3168bd8b7b900b0ec2e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39851
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
T Michael Turney