CB:66943 - commit 8d66fb1a70 (soc/amd: Add amdfw.rom in coreboot.pre)
changed the build flow for the amd firmware binary after glinda was
branched from morgana. Update glinda to match the other SoCs.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b0ccaa8c33e59f7146edd6a86f107480c152008
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Adding coreboot's postcodes to the smart trace buffer lets us see the
entire boot flow in one place.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8eb9f777b303622c144203eb53e2e1bf3314afaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This adds the mendocino specific code for printing the STB data to the
boot log. It still needs to be enabled in the mainboard to be used.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I249507a97ed6c44805e9e66a6ea23f200d62cf66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows platforms that support AMD's STB (Smart Trace Buffer) to
print the buffer at various points in the boot process.
The STB is roughly a hardware assisted postcode that captures the
time stamp of when the postcode was added to the buffer. Reading
from the STB clears the data.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8d78c0e86b244f3bd16248edf3850447fb0a9e2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This patch helps to save 10.200ms of booting time without any issue
seen during MP Init. All cores are out from reset and alive.
Additionally, no performance degradation is observed while running
benchmarks.
Refer to Intel Technical White Paper number:751003 for more details.
BUG=b:211770003
TEST=Able to boot to ChromeOS with all cores are enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1886bc5e60c2f6bc1e2f9d3c8d9c11799d2b53c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This reverts commit 9c2f3cc9d9.
This broke the smihandler for no clear reason on some platforms.
Change-Id: I72da99c019241b627ce8b543937364a53a5fe97b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
a) Add LTR disqualification in D3 to ensure PMC ignores LTR
from UFS IP as it is infinite.
b) Remove LTR disqualification in _PS0 to ensure PMC stops
ignoring LTR from UFS IP during D3 exit.
c) Add Kconfig (SOC_INTEL_UFS_LTR_DISQUALIFY) check to apply
this LTR WA.
BUG=b:252975357
TEST=build and boot nirwen and see no issues in PLT runs
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I88772b0b7dde1fca0130472a38628e72dfd6c26c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch introduces a config option for SoC code to choose
the applicable SoC workaround.
For now, we have introduced `SOC_INTEL_UFS_OCP_TIMER_DISABLE`
to apply UFS OCP timeout disable workaround.
At present ADL SoC only selects so, and in future MTL and others
should check with Intel prior selecting this kconfig.
It's the placeholder to add more workaround in required going forward.
BUG=none
TEST=Able to build and boot Google/Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia2364d2de9725256dfa2269f2feb3d892c52086a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68309
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable GPP clk req disabling for disabled PCIe devices. If a clk req
line is enabled for a PCIe device that is not actually present and
enabled then the L1SS could get confused and cause issues with
suspending the SoC.
BUG=b:250009974
TEST=Ran on skyrim proto device, verified that clk reqs are set
appropriately
Change-Id: I6c840f2fa3f9358f58c0386134d23511ff880248
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently the GPP clk req configuration code assumes that the size of
the config array is `GPP_CLK_OUTPUT_COUNT`. This commit changes that
code to use the `ARRAY_SIZE` macro instead.
BRANCH=guybrush
BUG=b:250009974
TEST=Ran on nipperkin device, verified that clk req settings are
correct.
Change-Id: I3ff555843c6f5aa38acd8300e0dc2da4e33fb4b7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Factor out the `gpp_dxio_update_clk_req_config` function as it will be
useful for other AMD SoCs.
BUG=b:250009974
TEST=Ran on nipperkin device, verified clk req settings match enabled
devices
Change-Id: I9a4c72d8e980993c76a1b128f17b65b0db972a03
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Instead of using magic constants for the fch_pic_routing and
fch_apic_routing array sizes, define FCH_IRQ_ROUTING_ENTRIES in the
common code headers and use this definition. This also allows to drop
the static assert for the array sizes. In the Stoneyridge mainboard code
the equivalent arrays are named mainboard_picr_data and
mainboard_intr_data; also use FCH_IRQ_ROUTING_ENTRIES as fixed array
size there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d7ee46bd013ce413189398a144e46ceac0c2a10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68818
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the fch_irq_routing struct once in a common header file instead
of in every mainboard's code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I11d9000b6ed7529e4afd7f6e8a7332c390da6dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68817
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Crypto engine prefers the buffer from SRAM. CBFS verification may pass
the mapped address of a CBFS file from SPI flash. This causes PSP crypto
engine to return invalid address. Hence if the buffer is from SRAM, pass
it directly to crypto engine. Else copy into a temporary buffer before
passing it to crypto engine.
BUG=b🅱️227809919
TEST=Build and boot to OS in skyrim with CBFS verification enabled using
both x86 verstage and PSP verstage.
Change-Id: Ie9bc9e786f302e7938969c8093d5405b5a85b711
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add region/range of SPI ROM to be verified by Google Security Chip
(GSC).
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: If8a766d9a7ef26f94e3ab002a9384ba9d444dd1f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Do not compress PSP BIOS image when CBFS verification is enabled.
Otherwise when a file is added to CBFS, cbfstool is not able to find the
metadata hash anchor magic in the compressed PSP BIOS image.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled for
both x86 and PSP verstage.
Change-Id: Iaed888b81d14ede77132ff48abcfbeb138c01ce4
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With CBFS verification enabled, CBFS file header + file name + metadata
consumes more than 64 bytes. Hence reserve additional space aligned to
the next 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: I2b7346e2150835443425179048415f3b27d89d89
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66944
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change ensures that amdfw.rom binary containing metadata hash
anchor is added before any file is added to CBFS. This will allow to
verify all the CBFS files that are not excluded from verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 and PSP verstages.
Change-Id: Id4d1a2d8b145cbbbf2da27aa73b296c9c8a65209
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
To enable RO CBFS verification in AMD platforms with PSP verstage,
metadata hash for RO CBFS is kept as part of verstage. This means any
updates to RO CBFS, before WP is enabled, requires updating the
metadata hash in the verstage. Hence keep the metadata hash outside the
signed range of PSP verstage. This means the metadata hash gets loaded
as part of loading PSP verstage while still being excluded from the
verification of PSP verstage.
This change keeps the metadata hash outside the PSP footer data. This
will help to keep it outside the signed range of PSP verstage & aligned
to 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled with
both x86 and PSP verstage.
Change-Id: I308223be8fbca1c0bec8c2e1c86ed65d9f91b966
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68135
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add build rules to build amdfwread tool. Also mark this as a dependency
either while building tools or amdfw.rom.
BUG=None
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3fee4e4c77f62bb2840270b3eaaa58b894780d75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66939
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Only edk2 used this to fill in a different struct but even there the
entries go unused, so removing this struct element from coreboot has
no side effects.
Change-Id: Iadd2678c4e01d30471eac43017392d256adda341
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch moves DRIVERS_INTEL_USB4_RETIMER config from Meteor Lake
SoC to Rex mainboard to maintain the symmetry with previous
generation ChromeOS devices (Brya and Volteer).
BUG=none
TEST=Able to build and boot to Google/Rex with USB4 functionality
remaining intact.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I38360f6f1f2fcb4b0315de93c68f00d77e63003c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This adds the initial framework for the Glinda SoC, based on what's been
done for Morgana already.
I believe that there's more that can be made common, but that work will
continue as both platforms are developed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I43d0fdb711c441dc410a14f6bb04b808abefe920
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Add system agent ID for RPL QDF# Q271
TEST=Tested by ODM and "MCH: device id a71b (rev 01) is Unknown" msg is
gone
Signed-off-by: Lawrence Chang <lawrence.chang@intel.corp-partner.google.com>
Change-Id: I6fd51d9915aa59d012c73abc2477531643655e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
When CONFIG_DEBUG_SMI is enabled SMM handler performs console hardware
initialization that may interfere with OS. Here we store the state
before console initialization and restore state before SMM exit.
Tested=On not public yet system, after exiting smm, uart console can
still work well.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Ifa5042c24f0e3217a75971d9e6067b1d1f56a484
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
After some measurements it turned out that Elkhart Lake uses a higher
CSR clock internally from which the MDIO clock is derived. In order to
stay compliant with the specification, the MDIO clock needs to be lower
than 2.5 MHz. Therefore, the divider needs to be 102 and not 62.
This patch changes the define to match the new divider value and uses
this new define at the appropriate place.
Test=Measure the MDIO clock rate on mc_ehl2 which results in 2 MHz.
Change-Id: Idf498c3547530dfa395f54488ef244e787062e34
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Depending on the real workload that is executed on the system the L1
prefetcher might be too aggressive and will populate the L1 cache ahead
with data that is not really needed. In the end, this will result in a
higher cache miss rate thus slowing down the real application.
This patch provides a devicetree option to disable the L1 prefetcher if
needed. This can be requested on mainboard level if needed.
Change-Id: I3fc8fb79c42c298a20928ae4912ee23916463038
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68667
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For MT8188, the SPDX identifiers are all GPL-2.0-only OR MIT, so
replace "GPL-2.0-only" with "GPL-2.0-only OR MIT".
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I5ef6c488b7ef937f6e298670ea75d306b9fe7491
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68759
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- For display, only vdosys0_pwr_con and edp_tx_pwr_con settings are
required.
- For audio, it requires powering on adsp_ao_pwr_con,
adsp_infra_pwr_con and audio_pwr_con.
- Add new power domain data `ext_buck_iso_bits` for buck isolation
control.
BUG=b:244208960
TEST=access display registers successfully.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7f00bda0cc5c7f8dea55a564a0ff10ae601115b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The SPM register at offset 0x0 is often named as poweron_config_set in
previous MediaTek SoCs. To use common driver, we rename it from
poweron_config_en to poweron_config_set.
BUG=none
TEST=emerge-geralt coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31dbf09d668844d3ee74790c657a2ab076e8cdf0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68486
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MT8195 supports 2P mode and MT8188 supports 1P mode. A new struct
member `input_mode` is added to `struct mtk_dpintf` for
differentiation. We also move SoC-specific data `dpintf_data` to soc
folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6d138b0ff75e005518bc8fcce06df20924b2a6ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
DP drivers can be shared for both MT8195 and MT8188, so move them to
common folder.
BUG=b:244208960
TEST=emerge-cherry coreboot.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic80c03aa6b13e6c9c39fd63b5c1c1cbdbe93a7c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
This is the enum value to initialize the Smart Trace Buffer's
Spill-to-DRAM feature. More information on how this is used is
available in the STB Linux kernel driver.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iab2e5fb121902959ddd0e7c8cca930a327b69291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Update the MCA bank names for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If0082bd5362bdead3f9dc693d1e338e8cda224f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For recent X86 CPUs, the 0x15 CPUID instruction will return Time Stamp
Counter Frequence. For CPUs that do not support this instruction, EDK2
must include a different library which is the reason why this must be
configured at build time.
If this is enabled, and the CPU doesn't support 0x15, it will fail to
boot. If is not enabled, and the CPU does support 0x15, it will still
boot but without support for the leaf. Consequently, disabled it by
default.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f0f43ce50c4f6f7eb03063fff34d015468f6daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Working with resources in KB is tedious and the base_k / size_k variable
naming was simply wrong in one case.
Change-Id: Ic5df054e714d06c9003752ed49dc704554e7b904
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68406
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
TOLUD stands for top of lower usable dram. Memory between cbmem_top and
TOLUD, even if stolen for another device/purpose can still be marked WB
cacheable. This will result in a cleaner MTRR setup.
Change-Id: Ic3d6f589c60e44a3dce9122d206397cac968647f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68405
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Enable the VCCST ICCMax Control for the ADL-N display flicker issue.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I10709ee8653563b397e8408e8e24ef8e656b02e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68252
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Make GPIO_I2C_MASK macro more accurate by using the GPIO_I2Cx_SCL
definitions instead of BIT(x).
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I13fc376552068a64768fe1cf9f1c09cca1768aed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
On nissa, the pre-x86 time is not part of the 1s firmware boot time
target. Including the pre-x86 timestamps causes confusion since the boot
time appears to be greater than 1s, so disable the Kconfig on nissa.
We're not doing any analysis or optimisation of the pre-x86 time on
nissa anyway, this work will start from MTL onwards. Also, the Kconfig
is already disabled on the brya firmware branch, so this will result in
the same behaviour as brya.
Before:
Total Time: 1,205,840
After:
Total Time: 995,300
BUG=b:239769532
TEST=Boot nivviks, check "1st timestamp" is the first timestamp.
Change-Id: I885071c9e0ff9c8fac9444b382567d38a19c3c15
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68553
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On MT8186T, the big cores are powered on by MT6315 via PMIF. This
patch adds the following changes.
- Add MT6315 settings.
- Configure PMIC PMIF for MT6315.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Id01931e564b0b5002b8d6b9d13d4f32cdf0ae708
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68620
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SPMI interface configuration is SoC-dependent.
- MT8192 and MT8195 are the same.
- MT8186 does not need to implement this.
- MT8188 is different from MT8195, and we will submit another patch to
fix this.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4cf508a0690995a7fe7b7316269d07cb7a799191
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For MT8186, PMIF_SPMI mode is the hardware default setting, so we don't
need to configure PMIF SPMI IO pins. Add a config to control that.
BUG=b:249436110
TEST=build pass.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I92b54e8379a5dec55ef95cbd72ce03abd3a4954b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68578
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MT8186 has two slightly different versions: MT8186G and MT8186T
(turbo version). Add get_cpu_id() to identify different CPUs.
BUG=b:249436110
TEST=cpu id is correct.
BRANCH=corsola
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0612dd589e11853dbddc1d99526e9c9bf170acec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68576
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the SMI definitions for morgana per PPR #57396, rev 1.52
Remove references to dropped SMITYPE_XHC2_PME in xhci.c to fix compile
errors.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6a9f05bcc6a6e4c94114ccbd07628629bdfabcba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This allows us to see which of the common code blocks have been verified
and which have not.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Icb9eba5838013de75c408c28a4a7d3afacdf0674
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch adds the support to enable/disable skipping MBP HOB
from the devicetree based on mainboard requirement.
Porting the feature from commit 2bc54e7c00
("soc/intel/alderlake: Add support to skip the MBP HOB")
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I360d33617b9d2626fce5600e861214b0747f57b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Now that the SoC-specific UART controller data and the common code part
are cleanly separated, move the code to the common AMD UART support
block folder. The code is identical to the UART code in Cezanne,
Mendocino, Morgana and Picasso while Stoneyridge doesn't use the parts
related to the MMIO device driver.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9429dac44bc02147a839db89d06e8eded7f1af2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I813483bc0421043dc67c523f0ea2016a16a29f60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I80278f1a098b389d78f8e9a9fb875c4e466dc5db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cfea274f4c9e908c11429199479aec037a00097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab1aec44c55570aa8085aeaf68ec69fe6de0f2ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use soc_get_uart_ctrlr_info to access the uart_info array
to further decouple uart_info from the code as preparation to factor out
most of the code to a common implementation. In order to slightly reduce
the number of function calls, pass the size of and pointer to uart_info
to get_uart_idx as a parameter instead of calling again
soc_get_uart_ctrlr_info in get_uart_idx despite all callers already
having the information form the soc_get_uart_ctrlr_info call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I474e47059eaebcf0b9b77f66ee993f1963ebee77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Initialize the two GPIOs of the SoC UART if it's used for serial console
to be sure that the I/O mux is configured correctly without having to
rely on the bootblock_mainboard_early_init call to do this. This brings
Stoneyridge more in line with the other AMD SoCs. Since this code will
be factored out to the common AMD SoC code in a follow-up patch, the
function prototype is added to southbridge.h instead of creating a new
uart.h header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4aa6734e63dad204d22ce962b983cde6e3abd62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
soc/iomap.h provides the UART base address information used in the
uart_info struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7defd135dc888cfc7d6e1c106d72116425560576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Introduce and use an array of soc_uart_ctrlr_info to align Stoneyridge
with the other AMD SoCs in order to allow commonization of the AMD SoC
UART code. Since the current Stoneyridge code doesn't provide or use
UART MMIO device operations, only the base addresses of the UART
controllers from this array are used for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie868cd3e2f77b0f7253c9f6d91dd3bbc3e4b6b0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The SoC's uart_info structs all use the same anonymous uart_info struct
definition, so create a named struct for this in the common AMD SoC UART
header and use it in the SoC code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id183a3c838c6ad26e264c2a29f3c20b00f10d9be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib893720911114d61ee6b3fbbf1a2a3594500bcfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5077681b64dd68351340bd179838a174d8df1701
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0e585370a0de56787340788acfecc7931820566d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The goal of this is to be able to move most of the code over to the
common AMD blocks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia496a4b29b25d4438ed8fc09bfe6f83e3fb768d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
We are required to boot with eMMC enabled in the BIOS to store modem
calibration data. Thus, it doesn't make sense to enable NVMe at boot
time since we will never boot from NVMe w/o eMMC. We may as well take
the boot time reduction (~100ms) by eliminating NVMe initialization.
BUG=b:185426670, b:254281839
BRANCH=None
TEST=Boot after disabling NVMe and make sure that it still boots
Note that we are able to see a little over 100ms in boot time
savings with this change.
Before: 40:device configuration 824,021 (102,701)
After: 40:device configuration 717,402 (44)
Cq-Depend: chromium:3964185
Change-Id: I94f614ba0369c073617949285c0781aef5c6263f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch drops `ufs.asl` from the local SoC directory.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I84e0b51e74e2d6a7120f1d990152bc27e37a501f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68302
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
This patch includes UFS ASL entry from common block ACPI code.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia77ea1c915d0dec991afa5b977af78487ae6a8b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68301
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
This patch migrates UFS ASL entry from Alder Lake SoC to common
block ACPI code to be able to be utilized across different IA SoCs.
Additionally, migrate to ASL2.0.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2e803138a20fd1fc3cdcd5c0fbbb1254663bb8dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68300
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59985f283f1694beeacb0999340111146fa3f39b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Move i2c SoC related code from early_fch.c to i2c.c
TEST=build boards for each SoC
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I69d4b32cf95ce74586bd8971c7ee4b56c1c2fc04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Update the GPIO definitions for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7fa4aaf81b5487f7548f430cb35630aca8be732f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This code is identical for all non-CAR AMD SoCs, so factor it out to
soc/amd/common/block/cpu/noncar/bootblock.c to avoid code duplication.
Also integrate the bootblock.c improvement to include cpu/cpu.h which
provides cpuid_eax from commit 68eb439d80 ("soc/amd/picasso: Clean up
includes").
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42e4aa85efd6312a3ab37f0323a35f6dd7acd8e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rename soc/amd/common/block/cpu/smm/smi_ampc_helper.c to smi_apmc.c and
add the fch_apmc_smi_handler function.
Remove the duplicated function from picasso, cezanne, mendocino, and
morgana SoC.
The stoneyridge soc does not implement the APM_CNT_SMMINFO handler, so
give the handler a unique name that does not conflict with the common
handler name.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e6fb59a1ee15b075ee3bbb5f95debe884b66789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68441
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9377c3b65aa342f754c303148b0b8d826d05bb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67662
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1f6e5344cab2af7aa6001b9ec0f07b043a9caa8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Cezanne has two SATA controllers, but doesn't select
SOC_AMD_COMMON_BLOCK_SATA, so it's not added to the SATA devices in the
Cezanne chipset devicetree.
Change-Id: If7f0a9638151cf981d891464a2c3a0ec5fc9c780
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removed the need to maintain a PCI driver.
Change-Id: I43def81d615749008fcc9de8734fa2aca752aa9d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This removes the need for a PCI driver.
Change-Id: I6674d13f434cfa27fa6514623ba305af6681f70d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This removes the need for a PCI driver.
Change-Id: Iab75f8c28a247f1370f4425e19cc215678bfa3e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This patch creates helper header file (ufs.h) for UFS to keep
required registers details and ACPI device id for UFS.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If08c54eb706876a4255542a708aa5fcd8bf43c55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68299
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add DEVAPC permission settings for ADSP and set its domain number to 6.
TEST=SOF driver is functional.
BUG=b:204229221
Change-Id: I37bfea70386af953e89f3c38ac51e41af6aafa6e
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68290
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To use SOF correctly, we need to initialize ADSP in coreboot stage.
TEST=SOF driver is functional.
BUG=b:204229221
Change-Id: I45db587252ccdcdf75e0be2029743034a79925c5
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68289
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To use SOF correctly, we need to enable power domain of ADSP.
TEST=SOF driver is functional.
BUG=b:204229221
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Change-Id: I39d1357af5f901a91379fdf7e595f16952b962de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68288
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To use SOF correctly, we need to enable ADSP clock.
TEST=SOF driver is functional.
BUG=b:204229221
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Change-Id: Ia17db889829df2668cf2af1b71c6468230de68e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68287
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements voltage function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor voltage value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I77712b72fa47bdcb56ffddeff15cff9f3b3bbe86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68023
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current SMBIOS for coreboot is missing processor info for Alder Lake
and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements max speed function.
Refer to SMBIOS spec sheet for documentation:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS max speed value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I09bcccc6f97238f7328224af8b852751114896fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67913
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The northbridge ops should be added to the actual northbridge and not
the first HT device. Neither of the devices has BARs on it, so
read_resources implementation will still work correctly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e5f21bfe5fff043d7d9afafa360764203dd61f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68409
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Stoneyridge is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime. In contrast to the other AMD
SoCs in the coreboot tree the PC driver used the PCI ID of the first HT
PCI device function, so add the ops to the device 0x18 function 0
devicetree entry in this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I500521701479aa271ebd61e22a1494c8bfaf87fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68408
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id668587e1b747c28207b213b985204b7a961a631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68410
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add chipset devicetrees for Stoneyridge and Carrizo, which is also
supported by the Stoneyridge code, but has more external PCIe ports and
devices. The mainboard's devicetrees will be changed to use the aliases
defined in the chipset devicetree in follow-up patches. This is a
preparation to statically assign the ops for the internal devices
statically in the SoC devicetree instead of dynamically adding them in
ramstage.
BKDG #55072 Rev 3.04 was used to check the PCI devices and functions and
the MMIO addresses.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia45260b1168ed1d99993adfb98475da5b5c90d11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68316
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This removes the need for a PCI driver.
Change-Id: I4b499013a80f5c1bd6ac265a5ae8e635598d9e6c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a PCI driver.
Change-Id: I8e235d25622d0bd3f1bb3f18ec0400a02f674a6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a PCI driver.
Change-Id: Id25016703d1716930d9b6c6d1dab5481b10aca17
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Morgana is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67362ae4a32bc9b1dd19ee5e4caf42db8f5dd1bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68311
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Mendocino is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: I5619c8ad42cdeb019cb7294da884909df64a2211
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Cezanne is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: If535221335217cee53bca956747e7f17f0a5fd8d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Picasso is a SoC so it makes sense to statically use ops instead of
matching them to PCI DID/VID at runtime.
Change-Id: Ide747c9d386731af89b27630b200676c6e439910
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67743
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This removes the need for a lot of boilerplate code in the soc code to
hook up device_operations to devices.
Change-Id: I2afc1855407910f1faa9bdd4e9416dd46474658e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows for reduced use of chip_operations in the followup patch and
allows the allocator to skip over the used mmio.
Change-Id: I4052438185e7861792733b96a1298201c73fc3ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
The psp_verstage/svc.h SVC_CALLx macros are virtually
identical between picasso/cezanne/mendocino, so move
to common.
TEST=timeless builds are identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I86a8d9b043f68c01ee487f2cdbf7f61934b4a520
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This reverts commit 4b5ba94363.
Reason for revert: This optimization is causing the non-serial enabled
tot BIOS to not boot. To get tot back into good shape, will revert
for now and reevalute this fix and resubmit at a later time.
BUG=b:218406702
BRANCH=None
TEST=reboot from AP console (on herobrine) after flashing
image-herobrine.bin.
prior to fix the device would never boot to login prompt.
after rever the device would boot to login prompt again.
Change-Id: Iaac5f2fb2120f6aa41a0ce9a763d50fd7b9a3ec7
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Function 'setbits16' performs an 'OR' operation with the new data and
the origin register entry. This can lead to an incorrect value in the
register which can then lead to issues.
Change-Id: I0212420be770e2ffdabebbfaf5dfbf8d99d25915
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Makes it possible to configure the maximum allowed/supported DDR memory
frequency on a per mainboard basis.
Test
- Define maximum memory frequency in mainboard devicetree.cb
- Boot into Linux and run 'sudo dmidecode --type 17' to check memory
speed
- Boot into Linux and run 'phoronix-test-suite benchmark ramspeed'
Change-Id: I9e0c7225e2141e675a20b8e3f0dbe8c0b3a29b28
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68097
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This is not critical functionality and doesn't need a build-time error.
Having it as a build time error causes a chicken & egg issue where
the chipset needs to be added before it can be added to this file, but
the header file fails the build because the chipset is unknown.
It's not practical to exclude these files from the new platform builds
because the PSP functionality is thoroughly embedded into the coreboot
structure.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ib02bbe1f9ffb343e1ff7c2bfdc45e7edffe7aaed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
This is an initial framework for the Morgana SoC.
TODOs have been added to the files for both customization and
commonization.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: If92e129db10d41595e1dc18a7c1dfe99d57790cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68195
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to Intel document number 336561, GLK has UFS (0x1d),
so add the PCI interrupt.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I68bac590bd1a9a0b8213440e882c8f431f06c95f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67680
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to Intel document number 336561, G, SD Card (0x1b)
does not exist on GLK, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I6921fc3db430c76ec54cf832ce51c627a507385c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67679
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To be able to change the MAC addresses, it is necessary that the
controllers are in D0 power state. As of FSP MR3, Intel has set the
controllers to D3 power state at the end of FSP-S TSN GbE
initialization. This patch sets the state back to D0 before the
programming of the MAC addresses.
Test:
- Build coreboot with FSP MR4 for mc_ehl2 mainboard
- Boot into Linux and check MAC addr via 'ip a'
Change-Id: I4002d58eb4332ba45c35d07820900dfd2c637f21
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
apu/amdfw_a was only getting added to CBFS when VBOOT_SLOTS_RW_AB was
selected, but needs to be added in the RW_A only case as well
(VBOOT_SLOTS_RW_A). Since VBOOT_SLOTS_RW_AB selects VBOOT_SLOTS_RW_A,
we can guard amdfw_a and _b separately and both will be added in the
RW_AB case.
TEST=build google/zork with VBOOT_SLOTS_RW_A or VBOOT_SLOTS_RW_AB
selected, ensure amdfw_a and amdfw_b are added to correct CBFS regions
as appropriate.
Change-Id: Ic8048e869d7449eeb1ac10bfec4a5646b848d6a8
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68126
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
apu/amdfw should be restricted to the RO region only when building with
VBOOT + any RW region (RW_A or RW_A + RW_B); it is not tied to ChromeOS
in any way. Fix guarding to match newer AMD platforms (eg, CZN/MDN).
TEST=build google/zork without CHROMEOS, with VBOOT_SLOTS_RW_A
Change-Id: I32d7fa7a4b3d41107cfdba96128a4a75f7066c6f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68125
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
RaptorLake introduces the support of the Voltage Regulator Fast Vmode
feature. When enabled, it makes the SoC throttle when the current
exceeds the I_TRIP threshold. This threshold should be between
Iccmax.app and Iccmax and take into account the specification of the
Voltage Regulator of the system.
This change provides a mean to:
1. Enable the feature via the `vr_config->enable_fast_vmode'. If no
I_TRIP value is supplied FSPs picks an adapted I_TRIP value for
the current SoC assuming a Voltage Regulator error accuracy of
6.5%.
2. Set the I_TRIP threshold via the `vr_config->fast_vmode_i_trip'
field.
These new fields are considered independent from the other `vr_config'
fields so that the board configuration does not have to unnecessarily
supply other VR settings to enable Fast VMode.
Information about the Fast VMode Feature can be found in the following
Intel documents:
- 627270 ADL and RPL Processor Family Core and Uncore BIOS
Specification
- 724220 RaptorLake Platform Fast V-Mode
- 686872 RaptorLake Lake U P H Platform
BUG=b:243120082
BRANCH=firmware-brya-14505.B
TEST=Read I_TRIP from the Pcode and verify consistency with
a few `enable_fast_vmode' and `fast_vmode_i_trip' settings.
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I313acf01c534d0d32620a9dedba7cf3b304ed2ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The values in this patch were found in the following datasheets:
* 334819 (APL)
* 336561 (GLK)
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I14c5933b9022703c8951da7c6a26eb703258ec37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently, after the PCIe link is initialized, we wait 100ms every
time the link is not up anymore. However, this causes significant
delay. Assuming the first check is false, we'd like to increase the
frequency of checks for the link to be up. Changing to check every
10ms instead. This seems to save about 90ms in the device
configuration stage of bootup on herobrine.
BUG=b:218406702
BRANCH=None
TEST=reboot from AP console (on herobrine)
prior to fix (from cbmem dump):
40:device configuration 919,391 (202,861)
after fix (from cbmem dump):
40:device configuration 826,294 (112,729)
Change-Id: Ic67e7207c1e9f589b34705dc24f5d1ea423e2d56
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: mturney mturney <quic_mturney@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Intel Core i5-10210U can have the following IGD Device IDs
0x9B21/0x9B41/0x9BAC/0x9BCA/0x9BCC according to Intel ARK. Some of
these IDs were not present in coreboot source nor hooked to the
common graphics driver. Add the missing IDs so that the graphics
driver will probe on the mentioned processor and detect the
framebuffer.
TEST=Boot Protectli VP4650 with i5-10210U and see framebuffer is
detected when using FSP GOP and libgfxinit.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iee720a272367aead31c8c8fa712bade1b6e53948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67975
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The delayed return of certain fetch instruction from memory to
the UFS causes the OCP fabric to timeout on the transaction
and become non-responsive.
As recommended by the SoC and IP teams,program the
OCP fabric register to avoid the timeout in the OCP fabric.
This patch adds the following changes
1. Program the OCP fabric registers in the PS0 routine.
2. Move the ssdt contents of UFS to dsdt asl code to avoid
duplication of UFS device creation
BUG=b:240222922
TEST=Build and boot Nirwen UFS board, observe no system hang
during Chrome PLT test.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I949a4538ea5c5c378a4e8ff7bb88546db1412df2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Copy AMD PSP fw hash table into memory, then pass it to the PSP.
The PSP will use this hash to verify it's the correct firmware bundled
with coreboot build and not replaced.
BUG=b:203597980
TEST=Build Skyrim BIOS image with the hash table and boot to OS after
PSP verified the binaries against the hash table.
Change-Id: I84bea97c89620d0388b27891a898ffde77052239
Signed-off-by: Kangheui Won <khwon@chromium.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60291
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
