Remove use of deprecated GoogleBinaryBlockHeader struct, and
replace with vb2_gbb_header.
BUG=b:124141368, chromium:954774
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Iee3bd877cb1791a689efdeabda324f43f7d0c6f2
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Sunrise Point-LP is used on Skylake and KabyLake platforms,
but the PCH IDs differ.
This commit adds the PCH IDs for Skylake mobile platforms
and renames the Kabylake macros to distinguish them.
Used Intel documents:
- 332995-001EN (I/O datasheet vol. 1)
- 332996-002EN (I/O datasheet vol. 2)
Change-Id: Id46224fcc44b06c91cbcd6c74a55c95e1de65ec6
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The file is no longer used by any code. Remove it.
Change-Id: I73f06cac11201dc37218d352ab995cf4f012c36a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Part of this checks whether tolum_base and cbmem_top are the same - however,
cbmem_top hasn't been initialised at the point where this call occurs.
Change the ordering to fix that.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Change-Id: Ib89e0513bdc35c3751a9d4c2a2789a2836046789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reset GPI Interrupt status and enable registers from ramstage instead of
bootblock so that it applies to devices in field.
BUG=b:130593883
BRANCH=octopus
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot up when the system is brought out of G3, S5 & S3. Ensure
that the system boots fine to ChromeOS.
Change-Id: Ib11b580ceb23bd1fe789f549b667a8ced2d859a1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32534
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A hook for romstage is already existing but not for ramstage.
It's very useful for debugging as it allows to run code
for testing purposes by the mainboard. Also, it allows to
run configuration code or configure FSP options, which
don't have a devicetree option.
Change-Id: I9edc543943c5cbc696fc6c615cb77ef68294c980
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Remove the bridge enable step of accessing D14F0x64. This method for
enabling the bridge appears to be last present in the SB700 device.
Beginning in the SB800 (and all FCH, SoC devices), the enable is in
PMxEC[0]. Since the bridge is enabled in bootblock to allow port 80h,
there is no need to maintain it in ramstage.
Correct the device used for misc. configuration of the LPC bridge.
The #defined value removed is 14.0 but the settings are in 14.3.
TEST=Boot Grunt, check console and dmesg for errors and warnings
BUG=b:131862871
Change-Id: I078be974dc3c78c94cb7c0832518f21bac029ff2
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Relocate the function to the more appropriate file.
Change-Id: I92a3e8d0461ae228f6c01567db159e2458de5f6b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch enables -Wtype-limits for the whole repository, which
disallows checking for a condition that must be always true or always
false based on type width (e.g. checking whether an unsigned variable is
negative or whether a 32-bit integer is larger than 4G). This helps
avoid easy to make and hard to find (because they often only affect
error paths) mistakes like
size_t size = fmap_read_area(...);
if (size < 0)
die("If only the compiler could've told me to use ssize_t instead");
Change-Id: I19edabfd092d09dad720e3fc47b44838163bfe25
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32536
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch fixes up all code that would throw a -Wtype-limits warning.
This sometimes involves eliminating unnecessary checks, adding a few odd
but harmless casts or just pragma'ing out the warning for a whole file
-- I tried to find the path of least resistance. I think the overall
benefit of the warning outweighs the occasional weirdness.
Change-Id: Iacd37eb1fad388d9db7267ceccb03e6dcf1ad0d2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32537
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
I can't claim that I really understand what this code does, but it looks
like there are platforms that use code from lib/spd_bin.c without
enabling CONFIG_GENERIC_SPD_BIN. Some functions in that file contain
references to CONFIG_DIMM_MAX, so that option probably shouldn't depend
on CONFIG_GENERIC_SPD_BIN.
Change-Id: I041c52b6bd255e9a9920e5a101165ba5fc5fa6f3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32548
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the Librem 13v3 as a separate board; instead build a
single firmware image for the 13 v2/v3 boards.
Clean up Kconfig options:
- remove entries for 13v3 board
- fold entries into a single line where possible
- remove redundant MAINBOARD_VERSION option (will default to 1.0)
- remove unused microcode length/location (only needed for FSP CAR)
Test: build/boot Librem 13 v2/v3 boards with same image
Change-Id: Ic09b8ec5c576f4c4c48ef30ee3f60a4c2c286cd3
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The {read,write}_index functions expect a 32 bit value, as
do the bitwise operations.
Found-by: Coverity Scan #1229584
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Idc2bc46c899d5a4e8b089644dca076a88d97dd7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Make use of:
* southbridge/intel/common/rcba.h
* southbridge/intel/common/pmbase.c
* defines in pch.h
Get rid of dependency to DEFAULT_RCBA.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: I879fce6a5bb80499e1986e618a1422a7aaa3a0c0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32066
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Run CPU at the highest freqency (1989MHz) to speed up the boot time.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I703ffcb99367f87e6792a72485f5634e0505e5ac
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32466
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When we increase voltages, it takes 200us for voltages to stablize.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I5f32035693b6084dbe763411c612ae5d1f7c9e48
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Updated GPP_A8 to be a GPI and SCI source, to support both wake and
notifications.
BUG=b:128941098
BRANCH=none
TEST=Compiles, simulated pen eject with PCH_INT_L signal. Both evtest
and waking from s0ix confirm this works. The output of /proc/interrupts
confirms the correct interrupt is triggered.
Change-Id: I080fb3cbfb3e2f55209ca31824b00ca820d70f78
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be
configured as GPI, GPIO Driver mode, and SCI interrupt.
Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by
PAD_CFG_GPI_IRQ_WAKE).
BUG=none
BRANCH=none
TEST=Compiles
Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change removes all the separate entrypoint dispatch
functions as they all share the same pattern.
Furthermore, none of the function definitions under vendorcode
binaryPI/AGESA.c file have proper declarations, the ones compiler
picks up from AGESA.h are for the internal implementations and
with sanely organized headerfiles would not be exposed outside
the build of AGESA at all.
Change-Id: I0b72badc007565740c93b58743cfd048e8b42775
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31485
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Due to PCB limitations the SD-Card interface is not able to operate
with the highest frequency reliably. The OS driver will switch to
the highest mode if a SD-Card is attached which supports this high
frequency mode. In order to work around this PCB limitation disable the
high frequency modes in the controller capabilities (SDR104 and HS400
mode) and leave SDR50 and DDR50 enabled.
Change-Id: Ia5fed5fb70b027de34170b49620927614a00fb7a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The entry for drivers/intel/fsp1_0/Kconfig was added under the
chipset menu before addtional FSP versions were added, and the
drivers/*/*/Kconfig entry added to support them. This results
in the fsp1_0 Kconfig items being duplicated in the Chipset and
Generic Drivers menus.
Remove the chipset entry since it's no longer needed.
Test: select FSP 1.0 mainboard (e.g. intel/minnowmax) in menuconfig,
observe FSP 1.0 Kconfig entries listed only under Generic Drivers menu.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: If1e78fb9259b1a46d308db829881eb3b3d17cf40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32565
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IASL reports warning 'Control Method should be made Serialized'.
Change _CRS method to Serialized.
BUG=N/A
TEST=Build Google Banon and Google Cyan
Change-Id: Iffa097a2100cfa91efa3b617311500b83f839bce
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
CB acts as I/O handler for QCLib (e.g. DDR training data)
This interface allows bi-directional data flow between
CB and QCLib
Tested and working interfaces:
DDR Training data
QCLib serial console output
DDR Information (base & size)
limits cfg data
TEST=build & run
Change-Id: I073186674a1a593547d1ee1d15c7cd4fd8ad5bc1
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
TEST=build & run
Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that support has been added for using the public FSP
repo for Braswell platform, clean up Kconfig options and
set sane defaults when using it.
The following changes have been made:
- add option to use the 3rdparty/fsp repo for Braswell platform
- reorder FSP 1.1 Kconfig entries for improved flow/readability
- set the default path for the FSP binary based on use of FSP
repo and platform
- set the CBFS location for the FSP binary based on platform
Change-Id: Ie2f732bf0ac4d4551908caa56360b8bb2869b4c7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The current Braswell FSP 1.1 header in vendorcode/intel, for
which there is no publicly available FSP binary, contains silicon
init UPDs which are not found in the publicly available header/binary
in the FSP Github repo. This prevents new boards from being added
which use the public Braswell FSP header/binary.
To resolve this, move the UPDs not found in the public header from
the soc's chip.c to ramstage.c for the boards which use them. Add
a Kconfig option to use the current non-public FSP header and
select it for boards which need it (google/cyan variants); set the
public FSP option as the default. Use the Kconfig option to set
FSP_HEADER_PATH to ensure the correct header is used.
Test: build google/cyan and intel/strago using non-public and
public FSP header/binaries respectively.
Change-Id: I43cf18b98c844175a87b61fdbe4b0b24484e5702
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Rather than selectively update the fsp submodule based on
FSP version or platform selection, update it when building
for any FSP-enabled platform, so all have latest version available.
Change-Id: If07d55828a1863623e04a4ecdd1514c3cb6d9c11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Enable acoustic noise mitgation for arcada platform,
the slow slew rates for Ia and Gt are fast time dived by 8.
BUG=b:131144464
TEST=waveform test and hardware validation result pass.
Signed-off-by: nathan chen <nathan_chen@wistron.corp-partner.google.com>
Change-Id: I395b2fc527705ab207325cfd7147e6af5f300fce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Main objective for this change is to export the bluetooth reset
gpio to the kernel for use in an rf-kill operation.
To do so, we enable USB acpi and define all of the USB2 devices,
which includes bluetooth's reset gpio information.
BUG=b:122540489
BRANCH=None
TEST=emerge-atlas coreboot chromeos-bootimage
$cat sys/firmware/acpi/tables/SSDT > /tmp/ssdt.dat &
retrieve ssdt.dat from DUT &
$iasl -d ./ssdt.dat & check the HS03 node is with "reset-gpio"
under _DSD object
Change-Id: I411ef707782655361bd1b8ac2b914b8ae64defeb
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Caveh Jalali <caveh@google.com>
This patch adds code to initialize two USB DWC3.0 controllers
and its associated QUSB V2 10nm PHYs to the SDM845 SOC, and uses them to
initialize USB3.0 on the cheza mainboard.
Synopsis controller initialization and configuration sequences taken from
USB 3.0 HPG chapter 2.2 and refer PHY HPG chapter 10.2 for QUSB phy
programming.
Includes Super speed mode support.
TEST=USB keypad and mass-storage device enumeration tested with this patch
Change-Id: I475a7757239acb8ef22a4d61afd59b304a7f0acc
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: I38d086c379a3c2f54d1603a2fed5b33860f7f4d7
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Change-Id: Idebbbd89de05d949e6f953aa49d8662d64383d1a
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This implementation corrects the GPE DWx mapping for GPIO groups.
The assignments is done in GPIO MISCFG register for all GPIO communities.
And configures the which GPIO communities get register as Tier1.
Change-Id: I9c306d46e5194944def26c24cdb95f5ebada42b8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This patch ports CB:32275 changes from CNL to ICL.
Ice Lake require that FSP-M component should be
XIP. This change selects FSP_M_XIP so that the right arguments are
passed into cbfstool when adding this component.
Change-Id: Icc5550f1f94957fa1b28c8bba6fc0efee98e233e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32507
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ports CB:31787 and CB:31908 changes from CNL to ICL.
This change moves soc_fill_power_state and soc_prev_sleep_state to
pmutil.c. It allows the functions to be used across romstage and smm.
Also fix GEN_PMCON bit checks as below:
ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
Change-Id: Ib7ab95b7bbcc97a076d27a11db2105f7b976b521
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32506
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ports CB:30718 and CB:31908 changes from CNL to ICL.
Add logging of chipset events on boot into the flash event log.
This was tested on a google/dragonegg board to ensure that events
like "System Reset" are added to the log as expected.
Also fix GEN_PMCON bit checks as below:
ICL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
Change-Id: I25ec32e81f8801f8d5e69c6095ffed73d75dded6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Joel Kitching