When I debug with HiFive Unleashed, I found that hart 4 could not be
running. Then find the duplicate MAX_CPUS definition. The correct
MAX_CPUS is located in src/soc/sifive/fu540/Kconfig
Change-Id: I583f6ba548daeeb6c7e341dc3fa8817e7dec5697
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/30179
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The following was tested:
- Using two DDR2 DIMMs
- S3 sleep and resume (on SeaBIOS it needs sercon disabled)
- Ethernet NIC
- Libgfxinit (native res and textmode)
- SATA
- USB
- 800MHz FSB CPU (Pentium(R) E5200 @ 2.50GHz)
- PS2 Keyboard
- Serial output
TODO:
- Add ACPI code for SuperIO devices (done in a follow-up patch)
- Add documentation
TESTED with SeaBIOS (sercon disabled), Linux 4.19
Change-Id: I483e1143e4095b8a58fed142d31ca7f233a854e2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30239
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are no public datasheets for this SuperIO. The results are from probing
the registers manually.
Change-Id: Ie5659533c5f224603f918d17942a7057e6701222
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Commit c37b0e3 [soc/intel/skylake: Generate ACPI DMAR table]
only generates DMAR tables for boards using FSP 2.0, which
leaves out Skylake Chromebooks, which use FSP 1.1.
Correct this omission by adding the same functionality for
FSP 1.1 boards.
Test: build/boot on U-series Skylake Chromebook, observe
IOMMU fully functional with intel_iommu=on kernel parameter.
Change-Id: I68837f58aac357fa3f58979fe92d8993fae58640
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
FSP support two SATA modes as AHCI mode (0) and RAID mode (1), make it
more clear in header file.
Change-Id: I1edcadc0048df839da145260b60f9f7720d981fe
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30093
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CPU ratio will be fixed to non-turbo max value if CpuRatio UPD had been
set to zero.
BUG=N/A
TEST=Boot up into sarien system, cat /proc/cpuinfo and cpu frequency is
changing.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I3e82293c8b6027ddf9a528d0654fe46f233dcb82
Reviewed-on: https://review.coreboot.org/c/30216
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When I added the cmos.layout file, I did not realise that the
southbridge code cleverly emulated the "keep state" option.
Tested on an ASRock H81M-HDS. The `Keep` option works as it should.
Change-Id: I908e59d1e1eedefa6610e7f980afc3c04390a519
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The deleted line crept in with commit 562db3bb3f ("libpayload: find
source of input characters").
Tested on an ASRock H81M-HDS with `power_on_after_fail` set to `Disable`
via CMOS. After this patch, the system no longer powers on as soon as
power is restored after a power failure.
Change-Id: Ie9d9dab9885b285db1c5094c2c8d62aae551f1e7
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
RAM is reserved for Chromeos even when Chrome is not used.
Use CONFIG_CHROMEOS to determine if RAM must be reserved.
BUG=N/A
TEST=Intel CherryHill CRB
Change-Id: I3f55bf96ab2ec66cddbb54de03455a9bfd194682
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
CONFIG_MAINBOARD_PART_NUMBER sometimes contains spaces, but spaces
inside compat strings aren't nice, so let's convert all spaces to
dashes.
Change-Id: I46f2b2d7091782e04df5476e50698001511f664b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Without this patch, the numbers restart at 1 at several points in the
HTML output.
Change-Id: Ie3634775ed9f993b1181785c58d72834183336e1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
The previous settings caused the I2C frequency for the audio bus to be
too high, at 417kHz. The settings in this commit correct the frequency
to 396kHz.
BUG=b:119423345
Change-Id: Ibed886e6e1b0df4df6b87f6291e515364b3bf718
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
commit msg copied from
commit id: 64c9f1584c
The GPIO drivers in Windows and Linux for the Icelake CPU
have a sparse GPIO map and do not allocate pins contiguously.
Each GPIO group is allocated as 32 pads regardless of whether
the hardware actually has that many in the group.
It appears this originated with a bug in Windows/UEFI and was
carried over to Linux in order to work with existing firmware:
https://lore.kernel.org/patchwork/patch/855244/
In order to support using ACPI GPIOs it is necessary for coreboot
to be compatible with this implementation. The GPIO groups that
are usable by the OS are declared with a pad base which is then
used to compute the number for ACPI GPIOs.
Change-Id: I94fafd8af13cf229f5c467de5179aed021465739
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/30276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This reverts commit ad41f55123.
Reason for revert: <Issue have seen on EVT platform that vboot always fail to verify keyblock A>
BUG=b:121169122
Change-Id: I2790ef3463a228008b614498009fbdc8b493cfb0
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30286
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the BMC firmware module is installed on the KGPE-D16, the
RAM SPD multiplexer lines are disconnected by hardware from the
SP5100 GPIOs and attached to BMC GPIO lines instead.
Set the BMC GPIOs to match the state of the SP5100 GPIOs during
RAM setup.
Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac5
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/19820
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The device ID is documented in "Intel Xeon Processor E3-1200 v3
Product Family Datasheet volume 2" section 2.2.
Tested with ASRock H81M-HDS with Xeon E3-1271 v3. SeaBIOS payload can
find the boot devices, and GRUB payload can boot Debian GNU/Linux on
the SATA disk.
Change-Id: I999391c9bbc6b39526ad7aec8a6d8fe1a9b5f921
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The Intel GMA ACPI opregion address needs to be set on S3 resume,
otherwise the Windows display driver fails to re-initialize correctly.
Fix by ensuring the address is set correctly regardless of display
init type used (GOP or VBIOS).
Test: build/boot on google/edgar, ensure internal display functional
following S3 resume under Windows 10.
Change-Id: I471c44e8ba4514e4a2ddf6739109b759145598ed
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Mirrors addition to Braswell SoC in commit d3d0f07.
Test: build/boot Windows 10 on Baytrail ChromeOS device, verify Windows shows
virtualization as enabled.
Change-Id: Ia1fafa73325814fed30b2ac91290b682dd8eab04
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Commit d80884ea5a ("mb/google/kahlee: Disable IOMMU") disabled the IOMMU
in all kahlee variants, but omitted the explaining comment only in
liara's devicetree.cb. Copy this comment to liara.
Change-Id: I564013a16217445003467e2a0579abd50597b205
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In commit eceba31c7f ("util/lint: Set "acknowledgement" correct"), the
word "acknowledgement" was removed from util/lint/spelling.txt. A more
robust solution is to comment it out, as done for "sepc" in commit
afa5ec8d5f ("util/lint: Update spelling.txt to latest linux version").
Change-Id: Ia976dedc9b31190d22e7b946f14709d5c4577f71
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
They are hopefully stable enough by now.
TEST=Building with for emulation/spike-riscv with BUILD_TIMELESS,
with and without this patch, results in the same coreboot.rom.
Change-Id: Ie6747c7eeea6cd8fd2138c5ba535a08c5add9038
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Using ${...} in some places is slightly confusing.
Fixes: 395cbb4f97 ("mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree")
Change-Id: Id0856a10d92786a41d45ca697945699f6f4c1f4c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
util/util_readme/util_readme.sh is specifically a bash script and
requires bash-specific features such as "[[". It doesn't work when run
with a "sh" shell that only implements POSIX features, such as dash.
Thus, tell the user to run the script directly, in which case the #!
line is used.
Change-Id: I5706ffe857c5a148e9776571a377ad8647f9a4c2
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
94b761c8e (util/board_status: run dmesg with sudo) attempted to
fetch the console as root locally but instead sudo was put in front
of the remote path which runs as root anyways.
Also unless quotation marks are used the cmd function will see 'sudo'
and 'dmesg' as separate aruguments.
Change-Id: Ib9e9e4b443f4e3ad04c5fda2c2ce626255a190f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Xiang Wang