Using struct prog and struct region_device allows for the
caller to be none-the-wiser about where FSP gets placed. It
also allows for the source location to be abstracted away
such that it doesn't require a large mapping up front to
do the relocation. Lastly, it allows for simplifying the
intel/commmon FSP support in that it can pass around a
struct prog.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I034b04ab2b7e9e01f5ee14fcc190f04b90517d30
Original-Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290830
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ibe1f206a9541902103551afaf212418fcc90e73c
Signed-off-by: Aaron Durbin <adurbin@chroumium.org>
Reviewed-on: http://review.coreboot.org/11193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch enables GPIO controller for skylake. It adds
community base addresses and offset for Community0, Community1,
and Community3. Community2 is not exposed in BIOS or enabled
in the kernel driver.
Also, clean up the carry over GWAK implementation from BDW.
BRANCH=None
BUG=chrome-os-partner:42393
TEST=cat /sys/kernel/debug/gpio should list of GPIOs
TEST=export a GPIO pin using /sys/class/gpio/export
Original-Change-Id: I891c40589d3dbd796cf593626472c7b5674a1ae0
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291230
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7481ce682ccae872fddf81b3188c3415d5d3f7d9
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Reviewed-on: http://review.coreboot.org/11191
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
acpi_is_wakeup_s3() was introduced in upstream coreboot
while the FSP support code was written. Move to using
that instead of using the romstage_handoff structure
directly.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=Built, booted, suspended, and resumed on glados.
Original-Change-Id: I71601a4be3c981672e25e189c98abb6a676462bf
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290720
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2ae4d9906e0891080481fb58b941921922a989d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11190
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Explicitly clear all write-1-to-clear fields in the
appropriate power state registers. That way stale
state isn't left around from boot to boot. The
MMIO PMC registers are always added such that the
resource can be accessed from reg_script. It doesn't
hurt to add the resource, and it's actually more
informative by attaching the actual resources
owned by the device.
BUG=chrome-os-partner:43625
BRANCH=None
TEST=Built and boot glados. Did global reset. Noticed bits
set. Did normal reset and saw those same bits no longer set.
Original-Change-Id: Idd412bd6bf2c6c57b46c74f9411bdf8413ddd83e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290339
Change-Id: Ibef1aefedf6ba006f17f9f94998a10b39cc6bfec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11186
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Leaving a sentinel 0xC0DEBABE and fixing it up is
is the old way of setting the correct base address
for GNVS. One just needs to reference NVSA which is
already filled in by the skylake ACPI code.
BUG=chrome-os-partner:43611
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados. /sys/firmware/log shows
up as well as ramoops using the correct address.
Original-Change-Id: I1d4979b1bb65faa76316a4ec4c551a7b9b9eed32
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290338
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I25efea73a383215f9365ce91230f79516b0201a6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11185
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Provide #defines for the bit fields in the SMI status register.
This allows for one to set the callback accordingly without
hard coding the index.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I3e61d431717c725748409ef5b543ad2eb82955c4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289802
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I1a91f2c8b903de4297aaa66f5c6ff15f1b9c54f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11184
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
DISB (bit 23) in GEN_PMCON_A represents to MRC that DRAM
training is complete. However, as a 8-bit write was
being performed the bit was never being set.
BUG=chrome-os-partner:43516
BRANCH=None
TEST=Built and booted to kernel. Rebooted. Noted full memory
training was not being peformed.
Original-Change-Id: If2a9cc2f80bc38ea86fb0d7ff855ef95540b561b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290337
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ic7973e0ec279304797e0b3d83d7378f620f2b548
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11183
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Open coding bitfields is really annoying as no one knows
what they are unless you have a doc in front of you.
Fill in the bitfields for the GEN_PMCON_A and GEN_PMCON_B
registers.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Id48de68eaa3896c17d5da2ffb0bcf17062f73e5e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290336
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I968be9736419e26a771e0a0c3c964d540fbb1efe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11182
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
FSP was setting up the TCO registers to be mapped at 0x400.
However, the SMBus initialization in romstage was mapping
its I/O BAR to 0x400 as well. The result seemed to cause the
TCO register to be hidden. However, the board was rebooting in
depthcharge when the SMBus device was enabled from a TCO timeout.
As the TCO timer was halted before the double resource assignment
it's not clear how the TCO was getting re-enabled. In either case,
the current behavior is wrong.
BUG=chrome-os-partner:42407
BRANCH=None
TEST=Built and booted glados w/ SMBus enabled.
Original-Change-Id: I43c0d67a76abac51ccfd5105245792981fbcd04c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290363
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I3839290768c27626c3fd2d67d5de94c291c1386e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11180
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's important to be able to configure the gpio pads at
various stages instead of a single place using FSP. Without
this support there is a lot of duplicated open-coded pad
configuration taking place both within the SoC code and
mainboards.
Current limitation is that all GPIOs are in ACPI mode. i.e.
The HostSW ownership register sets the pad configuration to
only update GPI_GPE_STS, GPI_NMI_STS and/or GPI_SMI_STS. The
GPI_STS update is masked within the GPIO community registers.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Id8a00e99c7a4c3912de2feaff9cea12b402f2c68
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289789
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I4c86b47ac5ab004f2bfd7cb07dd23c458f7dbb7c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11174
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Many Kconfig options changed in coreboot.org since
skylake was first started. Fix Kconfig option name
changes, and also provide a common option, UART_DEBUG
that can be selected to select all the necessary
options.
Note: It's still a requirement to manually unset the
8250IO option because that's unconditionally set.
BUG=chrome-os-partner:43419
BUG=chrome-os-partner:43463
BRANCH=None
TEST=Built glados. Booted into kernel. Kernel reboots somewhere.
Original-Change-Id: I9e6549ea0f1d6b9ffe64a73856ec87b5bc7b7091
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289951
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I0e6b492d7279cc35d4fb3ac17fd727177adce39d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11172
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for enabling various pins in Deep Sx by setting
a register in the mainboard devicetree.
BUG=chrome-os-partner:43079
BRANCH=none
TEST=build and boot on glados
Original-Change-Id: I1b4fb51f72b88bdc49096268bdd781750dcd089d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7555a92fecc6e78b579ec0bc18da202cb0c824e2
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11170
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
CBFS_SIZE is living as a mainboard attribute. Because
of the Kconfig include ordering the SoC *cannot* set
the default. Remove from the soc Kconfig and add a
default Kconfig for SOC_INTEL_SKYLAKE.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=built glados
Original-Change-Id: I8808177b573ce8e2158c9e598dbfea9ff84b97c7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289833
Original-Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: Icf52d7861eee016a35be899e5486deb0924a0f3c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11168
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In the review process for http://review.coreboot.org/#/c/11052/
the code was mangled and the result was unbuildable code. Fix this.
BUG=chrome-os-partner:43419
BRANCH=None
TEST=Can actually build bootblock.
Original-Change-Id: I5bc63b8c435dbf025f1c334e9a1bc4a9da2b4902
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289788
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: Id0f67d8b74fa9146bf01990f599d538222f7e0e2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11167
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Remove dependency of common reset code on FSP
BRANCH=none
BUG=None
TEST=Build and run on Braswell and Skylake
Original-Change-Id: I00052f29326f691b6d56d2349f99815cafff5848
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286932
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7f59f0aad7dfae92df28cf20fff2d5a684795d22
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11165
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Some FSF addresses found their way back into our tree.
Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11145
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
For Skylake, Microcode is being loaded from FIT, Skylake supports
the PRMRR/SGX feature. If This is supported the FIT microcode
load will set the msr (0x08b) with the Patch id one less than the
id in the microcode binary. This results in Microcode getting
reloaded again in bootclock and ramstage (MP init).
Avoid the microcode reload by checking for PRMRR support.
BUG=chrome-os-partner:42046
BRANCH=None TEST=Built for glados and tested on RVP3
CQ-DEPEND=CL:287513
Change-Id: Ic5dbf4d14dc1441e5b5acead589a418687df7dca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c599714b2aef476297eeaad5da8975731b12785a
Original-Change-Id: Id3a387aa2d8fd2fd69052bfc7b4e88a7ec277a72
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287674
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11056
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
If Skylake microcode is being loaded from FIT, Skylake supports
the PRMRR/SGX feature. If this is supported the FIT microcode
load will set the msr (0x08b) with the patch ID one less than the
ID in the microcode binary. This results in microcode getting
reloaded again in the bootblock cpu init.
Avoid the microcode reload by checking for PRMRR support.
BUG=chrome-os-partner:42046
BRANCH=None
TEST=Built for glados and tested on RVP3
Change-Id: I06e59f5cad549098c7ba2dfa608cd94a0b3f0ae1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6242b9dea283149bd0c968af1ba186647d37162d
Original-Change-Id: Iea5a223aa625be3fc451e8ee5d3510f548b07f8b
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286054
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11052
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Remove the items that are obviously broadwell left or become no-need
with fsp.
BUG=chrome-os-partner:43186
BRANCH=None
TEST=build and boot on sklrvp3.
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Change-Id: I5dfd62363eecc514e45a7b7ba0961ec7fe0499ee
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 570920cdc9e9c08ee85dcb08998069f1cae2d3cd
Original-Change-Id: I63176584042516c4d28f1bb6403e7bbe5de61010
Original-Reviewed-on: https://chromium-review.googlesource.com/288833
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: http://review.coreboot.org/11072
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some of the field and register names in the power management
code were not reflecting current chipset documentation. While
in there fix 0-sized array in the power_state structure. Lastly,
log the entire STD GPE register for visibility in elog. It reports
as an extension of other GPIO wake events.
BUG=None
BRANCH=None
TEST=Built and booted.
Change-Id: I57a621a418f90103ff92ddbf747e71a11d517c9a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: ed15cc7d0aeee8070e134ed03e28fced9361c00e
Original-Change-Id: I19f9463c87e9472608e69d143932e66ea2b3c3e1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288296
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11070
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to aid users of the PCR register space provide
pcr_port_regs().
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built glados.
Change-Id: Ibfcffbfd4304a59dd80a88dc18404d3a5dfa2f5d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 5f796319ba1d00557e32bf18309fc3cc772ccae0
Original-Change-Id: I21243d18c1bbd19468f8f279b2daa4e40a8f0699
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288193
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11068
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide more clarity on what some of the gpio
functions are doing add a 'gpio_' prefix to the globally
visible functions.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built glados.
Change-Id: I4cf48558c1eb9986ed52b160b6564ceaa3cb94b4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: f79ef113797884063621fe6cd5cc374c53390ebd
Original-Change-Id: I0d8003efff77b92802e0caf8125046203f315ae4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288192
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11067
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These types and definitions were carried over from a previous
platform. However, they are not used. Remove them.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built on glados
Change-Id: Ib3d20222df34a32865aac6b6cf13517c208e17c6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: be2d0d273a6c02483a944edac95ab48c433b29cd
Original-Change-Id: I56a0d549f5733eec8f405f2024ced8c153fa545c
Original-Signed-off-by: Aaron Durbin <adurbin@chormium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288191
Original-Trybot-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As in cold boot path, implement MBIST workaround in lp0
resume path.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume
Change-Id: I997009ecb0f52fb5a47c62b8daea33e472ec2664
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 4b1f80ea4c1d3782eb9f2c90c2a8d7b2e97ba050
Original-Change-Id: Ib4944401e1df02bf0aab1e78db7e14ef56c7f829
Original-Reviewed-on: https://chromium-review.googlesource.com/287287
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://review.coreboot.org/11071
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Commit "BCRD2: Enable LPDDR3" with the Change-Id listed below contained
additions to braswell's chip.h which were lost during merging.
BRANCH=None
BUG=None
TEST=google/strago builds
Change-Id: I995b788b6a308cefa23228544127bb1e384bbcc7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 561edf23ab696772fd0a6af34cb435db9d96e912
Original-Change-Id: Ie08900bc62d517394412cc597274fb8f5b6b0f51
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Original-Change-Id: I1cb5a03b77baf2df125b648dd75c9f8166f5571e
Original-Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Original-Reviewed-on: https://chromium-review.googlesource.com/282155
Original-Reviewed-on: https://chromium-review.googlesource.com/288880
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11065
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enable PMIC SVID config for BCRD2 based
on board id. UPD parameter is used to
select the SVID config and PMIC I2C bus
number
BRANCH=None
BUG=None
TEST=Build and boot the system
Change-Id: I3c4c06bd25c241abdf46aa14af74eecf77cf77a6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 10bb8d4ad96d1187f6e135ca1535d70ae45ee887
Original-Change-Id: I9191db7bace4f4840e3c32381093c6c0806f7c32
Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282156
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The fspNotify(EnumInitPhaseAfterPciEnumeration) is already
registered in fsp_util.c as a generic callback, this is some code
left from early development.
Also I don't see a need for the chip_final function, although we
could keep it as a placeholder but i decided to remove it.
BUG=chrome-os-partner:42979
BRANCH=None
TEST=build with current fsp and the coming fsp 1.3.0, boot on sklrvp3.
Change-Id: Ia892f2021be324859c344b4cb8cdeaf75f7ee32f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae22ad57ddbab787da000ae99f85fd2b3d4092e7
Original-Change-Id: I41be566da71f80451ff70ddd8ada77bf9b8d5b1d
Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287991
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11054
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
In order to build without CONFIG_CONSOLE_SERIAL the Skylake
SOC Kconfig should not be enabling serial console by default.
Also fix other compile issues when serial console is disabled.
BUG=chrome-os-partner:40857
BRANCH=none
TEST=build glados without serial console enabled
Change-Id: I2b20d9d9cd66e79587525f7bb458782eeeac4a95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f40fbea8d5dade560c08e4abf15a2a1cc28b9e55
Original-Change-Id: I6c5da8a5eee4090c89deb8feba676479cd834292
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287438
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11043
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The correct function prototype is
void write32(void *addr, uint32_t val)
BUG=chrome-os-partner:38073
BRANCH=none
TEST=build lp0 code and see it succeed.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: Icadc9e2d142e5a222509e894f43b0c8a70eed031
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b46635d9d3ee1ca364e7ad6d6dd7ea9efa9dedbc
Original-Change-Id: Id2b6847af80dfddcb3b7133a663becb78ed477ba
Original-Reviewed-on: https://chromium-review.googlesource.com/285544
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11049
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The checkpatch.pl scripts complains about the placing of the inline
keyword:
ERROR: inline keyword should sit between storage class and type
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BUG=chrome-os-partner:38073
BRANCH=none
TEST=repo upload works ;)
Change-Id: Ibd2b8a437eda2fc720f8fc32c5821bae3be41d12
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d20c0d34240966d5ae39c1667d4486b4341e183b
Original-Change-Id: I36d600c4677c622c334d849bf260323592a8a4fc
Original-Reviewed-on: https://chromium-review.googlesource.com/285543
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11048
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For audio to work, need to enable CLK_V_EXTPERIPH1 clock.
This CL is needed because after MBIST workaround is applied,
CLK_V_EXTPERIPH1 clock is default to be off.
BUG=None
BRANCH=None
TEST=Tested on Smaug, hear beep when press Ctrl+U at serial console
when DEV screen is showing
Change-Id: I32dccc0c7983f8fa86812d845a2f00ac9881d521
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 149d04e6ba642734d5ea36cac8206fad3ac13ce0
Original-Change-Id: Ifa1afb0798c1039c8ea9084b5a7ee3b09b4d70ac
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285604
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11041
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable WRAP to INCR burst type conversion in MSELECT.
MSELECT CONFIG register can only be accessed by CPU. So do
it in ramstage when CPU is started.
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: Iee05531c45e566f47af24870be6068247c2d9a00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21d9e4d3a8827f7bba57c03ca36b702aaba1ce20
Original-Change-Id: I6a241455b28f24b8756ad09bf7605a2e7e52af57
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282418
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11040
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MBIST has left some registers in non-suggested states. This CL
restores CAR CE's, SLCG overrides & PLLD settings.
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: I1ddb19dd9fb6d8fb4d36e67eedeb847c6fd9f774
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37a1c90c6deb351b2ae2caa03e5076553126744b
Original-Change-Id: I613b4ef622d64305d436cb8379a5170b0fe1c9af
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282417
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11039
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Like in cold boot path, need to set CAR2PMC_CPU_ACK_WIDTH to 0
in lp0 resume path.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume
Change-Id: Iffd7fa4d0266e2ec482ec17e5203ceff8afe748f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 052b649b1e6a4e34d621d710ee43aec7149ab8a8
Original-Change-Id: Icdf9879469485fb37b820b30c9663eda528ac013
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286600
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/11037
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MBIST workaround needs more space in bootblock.
bootblock += 4KB; romstage -= 4KB
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: I8338d0a134185a425af36e302dcf0ed1520b7e21
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 388523bf4fa25ff3ecf9607ff36ce7c6109485ed
Original-Change-Id: Ib08f2ff438f9d96a19b44af1b3e13260966f98f1
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287286
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11038
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since the FSP memory info HOB does not return all the data that we
need about a DIMM add a weak function that will allow the mainboard
to supplement the generated memory_info structure.
Ideally this would not be necessary but until FSP returns the
module part number we need this.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=run "mosys memory spd print all" on glados
Change-Id: Ic6d0ee0a31d23efcf7e7d7f18a74e944e09e7b46
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34ad7f1906ba526e52d38d5a6bce7b88b83f0c13
Original-Change-Id: I8509c5c627c1605894473fdea567e7f7ede08cf9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286876
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11033
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add SMBIOS symbols to define the memory width. Update the Intel common
code to display the memory width and provide the memory width to SMBIOS.
Also display the memory frequency, size and bus width in decimal.
BRANCH=none
BUG=None
TEST=None
Change-Id: I67b814d79fdbbf6ce65ac6b4a8282ab15fb91369
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e59c7260afd180f3adcbeda7cef1b9eca3ed846
Original-Change-Id: Ibd26812c2aad4deaab62111b1e018be69c4faa7b
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282115
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the C types and functions from PCR so that pcr.h
can be included from assembly and ACPI. While in there
make the PCR reg caclulation using a C function and
place the P2SB (PCH_PCR_BASE_ADDRESS) address in iomap.h.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I9cde178bcdbf49327ef7892393fc277f6c74f34b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fdf5c77ecfa0ca8d3c45604d15b9dec9a6e85193
Original-Change-Id: I5996efaa9869f8f412e4d45c13f30233384a38b2
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286901
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11030
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The current primary to sideband (P2SB) code for private configuration
register (PCR) access weren't very clear with the naming or
reasoning for some of the code. Provide more verbiage surrounding
this interface.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I5b2e84444a29b2fc2f527502e8c9f26eb60e687a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 06345ba1abd893059a6584856851f92f43289247
Original-Change-Id: If57a4bbc90365c1135b4986dce328b5dbabe483b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286900
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11029
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Baytrail FSP Gold4 release added 5 PCD options. Update UPD_DATA_REGION
structure to include these new PCD options and initialized the setting
when given in devicetree.cb.
Change-Id: Ic343e79479464972455e42f9352b3bb116c6f80f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/10838
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
In case of continuous mode, use STA_ACTIVITY bit to determine if DMA
operation is complete. However, in case of ONCE mode, use STA_BSY bit
to determine if DMA operation on the channel is complete.
This change was propogated from T210, commit ID fe48f094
BUG=None
BRANCH=None
TEST=Ryu/Rush build OK.
Change-Id: I13073cc12ed0a6390d55b00c725d1cc7d0797e23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aab62d5148b57fd1e05c1e838eafe8fdee431ef8
Original-Change-Id: I7388e9fd73d591de50962aaefc5ab902f560fc6f
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286468
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11017
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Address region from 0x0 to 0x00ffffff is used for IROM_LOVEC and
can not be accessed by Bootloader.
Issue found in CL: 283104 is captured by this patch.
BUG=None
BRANCH=None
TEST=Compiles successfully and reboot test does not crash in firmware
Here are memory mapping table before and after this CL for evt2 board:
Before:
Mapping address range [0000000000000000:0000000040000000) as cacheable | read-write | secure | device
Mapping address range [0000000040000000:0000000040040000) as cacheable | read-write | non-secure | normal
Mapping address range [0000000040040000:0000000080000000) as cacheable | read-write | secure | device
Mapping address range [0000000080000000:00000000feb00000) as cacheable | read-write | non-secure | normal
Mapping address range [00000000fec00000:0000000100000000) as cacheable | read-write | secure | normal
Mapping address range [0000000100000000:0000000140000000) as cacheable | read-write | non-secure | normal
After:
Mapping address range [0000000001000000:0000000040000000) as cacheable | read-write | secure | device
Mapping address range [0000000040000000:0000000040040000) as cacheable | read-write | non-secure | normal
Mapping address range [0000000040040000:0000000080000000) as cacheable | read-write | secure | device
Mapping address range [0000000080000000:00000000feb00000) as cacheable | read-write | non-secure | normal
Mapping address range [00000000fec00000:0000000100000000) as cacheable | read-write | secure | normal
Mapping address range [0000000100000000:0000000140000000) as cacheable | read-write | non-secure | normal
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: I07d38a8994c37bf945a68fb95a156c13f435ded2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3eee44944c2c83cc3530bfac0d71b86d3265f5b2
Original-Change-Id: I2b827064807ed715625af627db1826c3a01121ec
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285260
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11015
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Log the global reset causes in the power state structure.
While working in there pack the struct and use width-specific
types as this struct crosses the romstate <-> ramstage boundary.
Lastly, remove hsio version as it wasn't being written or read.
After global reset induced:
PM1_STS: 0000
PM1_EN: 0000
PM1_CNT: 00000000
TCO_STS: 0000 0000
GPE0_STS: 00000000 00000000 00000000 00000000
GPE0_EN: 00000000 00000000 00000000 00000000
GEN_PMCON: d8010200 00003808
GBLRST_CAUSE: 00000000 00040004
Previous Sleep State: S0
BUG=None
BRANCH=None
TEST=Induced global reset on glados using ETR3 register and write
to cf9.
Change-Id: I97b93de336e74c0e02199241376e74340612f0a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bbc8f1d62131c0381e9d401f3281ee7a17fc2a47
Original-Change-Id: I1a8e5d07c6c0e09c163effe27491d8f198823617
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286640
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11011
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Aaron Durbin