Warn when a definition is using '()' instead of '(void)'.
Use of ‘()’ is considered an old-style definition in C1x standards,
but probably not in C2x.
Change-Id: I734cfffe3e89996ab13e846cc08e13753f24f742
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Previously, running "make printall" when there was no .config available,
the system would give an error that printall wasn't a valid target. This
is because it was only in an invalid if clause. This change adds it to
the other branch of the if clause so it will print out a notice of what
the issue is.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I20670ae875be67ac2edf877c53de4702c4fc7c7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There shouldn't be any change to functionality here - this should be
strictly cleanup.
- STYLE: Put variables inside braces.
- SHELLCHECK: Instead of 'var= ' to clear a variable, use 'var=""'
- SHELLCHECK: Put commands and command variables inside quotes.
- SHELLCHECK: Don't use variables inside the printf commands.
- OTHER: COREBOOT_BUILD needed a date format when the variables in the
our_date() function were put into quotes. This format matches the
output of 'LANG="" LC_ALL=C TZ=UTC0 date'
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3303caee5c7a53c9df579e6f48d2c3d075a8c278
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
- 'git describe --match [0-9].[0-9]*' was giving me an error, so use
the basic 'git describe' command instead.
- If a .coreboot-version file exists, use that to determine the version.
This fixes the problem for coreboot releases.
- Don't run git for the versions unless it's being built from a valid
git repository. Use 0.0 as the default version for timeless or unknown.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5fae2f012cc9b9914d8803af8dd58a885358cb1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The `HyperThreading` FSP UPD is set according to the `hyper_threading`
CMOS option using the value of the `FSP_HYPERTHREADING` Kconfig option
as fallback in case options are disabled or otherwise unavailable. The
`HyperThreadingDisable` devicetree setting isn't used by any mainboard
but it overwrites the value of the FSP UPD. Remove it so that the CMOS
and Kconfig options work as intended.
Change-Id: Iea60b89f6f970eb9aee8c7bec026ab5c2df30205
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69534
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update SRAT table revision to 3 according to ACPI spec.
Add CEDT table revision according to CXL spec.
Change-Id: Iecc3a9892b0f8093013b2a426749e2ec5c00803b
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Change the EC FW CBFS filename prefix to a more accurate "ec/"
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic789df11160e3ffe7b7294b11e1fa80e3c3961ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70206
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixing documentation of PAD_INT macro and replacing spaces with a tab to
match the rest of the documentation.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I72a2578ce21dd10b3beb65c706440c3379f216d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70281
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
ELOG_CROS_DIAG_RESULT_* codes should be consistent with the enum
definition of enumerated histograms.
Hence add comments based on the requirements of enum histograms in
histogram guidelines.
BUG=b:4047421
TEST=none
Change-Id: I1a1a7c863d5aa9496649f81dc94fd79a6ad482df
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70145
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add RTD3 support for adlrvp_p_ext_ec and adlrvp_rpl_ext_ec
BUG=none
BRANCH=firmware-brya-14505.B
TEST=Insert a SD card or NIC AIC on PCIe slot1 and run
'suspend_stress_test -c 1'. The RP8 should not cause suspend issue.
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Ieb7d207a7ec3763bad3e82522e86a825c1ed00b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70119
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Add the RPL CPU power limits to kano and zydron's power limit table.
BUG=b:261127266
BRANCH=brya
TEST="emerge-brya coreboot chromeos-bootimage", flash zydron with
image-zydron.serial.bin and verify zydron boots successfully to kernel.
Change-Id: I369c5d7a9a3db0c3e7184a23b0f159ed715b5a50
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70238
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DSI CMDQ offset of MT8186 is different from previous SoCs.
Therefore, we define two versions for DSI register header files. The v1
is for MT8173/MT8183/MT8192 and the v2 is for MT8186/MT8188.
BUG=b:244208960
TEST=build pass
BRANCH=corsola
Change-Id: I3d13ca03b72554ab7be2b194db32a4f961f38dad
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70183
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For geralt project, we also support MIPI panel as our firmware display.
So add this patch to configure ddp to choose eDP display or MIPI panel
display.
BUG=b:244208960
TEST=test firmware display pass for both eDP and MIPI panel on MT8188
EVB.
Change-Id: I06f38b1889811274588c26e9284da4d502acf38b
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70181
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is added at runtime.
Change-Id: I7716f8a972e2280179aa6aee00488b22413c0c73
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69298
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
C5, C6 and slfm depend on the southbridge and the northbridge to be able
to provide this functionality, with some just lacking the possibility to
do so. Move the devicetree configuration to the southbridge.
This removes the need for a magic lapic in the devicetree.
Change-Id: I4a9b1e684a7927259adae9b1d42a67e907722109
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Zork boards will not boot without PSP verstage/VBOOT, so select it
by default.
Change-Id: I2447bf69baefd5560a0153dcd3d9b87b0a91a3f9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69763
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This will avoid clearing the other bits in fifo_status.
Change-Id: I7917b3f8d9af6056ed872b7e48cef9c3deba5119
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch adds PCIe based SD controller at RP 7 (from RP 11) with
Proto 1 schematics dated 11/30.
Additionally, added the RTD3 entries for the SD controller.
Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in
bootblock and SD_PERST_L (GPP_D02) is configured in romstage to
meet the power cycle requirement.
BUG=b:242917011
TEST=Able to build and boot Google/Rex. SD card detection is due
for the Proto 1 hardware.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch drops the usage of reading `board_id()` while performing
the GPIO configuration.
The reason to drop the board_id check is to ensure that GPIO
configuration for MLB (mainboard) would remain the same and the only
GPIO PIN configuration that differs would be due to usage of having
different DBs (daughter board) which will be taken care using
CBI (and fw_config.c file) in coreboot.
Additionally, drop unused early GPIO default configuration table.
BUG=b:260804656
TEST=Able to perform the GPIO configuration and able to boot
Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Enable this feature, and it can use the probe statement in devicetree
to cache of fw_config field as oem string.
TEST=With CBI FW_CONFIG field set to 0x1561
localhost ~ # dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 3.0 present.
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: AUDIO-MAX98357_ALC5682I_I2S
String 2: CELLULAR-CELLULAR_PCIE
String 3: UFC-UFC_MIPI
String 4: WFC-WFC_MIPI
String 5: DB_SD-SD_GL9755S
Change-Id: I6cb35eb9c0fbe32764ca76bb7a929cc92fc38404
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
NVMe is determined by a logical bit 1, not the physical SKU pin.
Thus, (logical) sku_id & 0x2 == 0x2 would mean that the device has
NVMe enabled on it. Previously, I thought that it was tied to a
physical pin, but this is not correct.
BUG=b:254281839
BRANCH=None
TEST=flash and boot on villager and make sure that NVMe is not
initialized in coreboot.
Change-Id: Iaa75d2418d6a2351d874842e8678bd6ad3c92526
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70230
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes using USB-C devices in either orientation on left-side USB-C
port.
Test: Plug USB-C device in both orientations on left-side USB-C port,
check speed with lsusb -t.
Change-Id: I9fbc53bb51a5225e92b0b6bb9ced87a0ab90c9ce
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69702
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The devices in the list that was introduced in commit c66ea98577
("soc/intel/alderlake: provide a list of D-states to enter
LPM") are all internal. This CL skips the external buses (which caused
the addition of packages to non-existant paths such as
"_SB.PCI0.RP1.MCHC", and warnings from the kernel)
BUG=b:231582182
TEST=Built and tested on anahera by verifying SSDT contents
Change-Id: I3785b2b2af85d96e2e1296b6cfdefcd72080b5fe
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70163
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add WiFi SAR table for zydron.
BUG=b:260770999
TEST=build FW and checked SAR table can load by WiFi driver.
Change-Id: I8d5f966c7af3ac6d9923d4f6c851bfb340f31fab
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Per Intel doc 621483, 26.1.1 - NMI_STS_CNT, 8254 timer is required
for Speaker Data output (buzzer) at GPP_B14 NF1, as it is using
8254 timer counter 2 output. However when 8254 timer is used, S0ix
will not work as 8254 has to be gated instead. For further info on
s0ix requirements, refer to Intel doc 610002 (Modern Standby Unified
Checklist).
This CL also disables s0ix because it is not required by the
platform.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Ib5e7787a47509ed09818d8515d21a80196fb1ec6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67553
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
'gpu_lvds_use_spread_spectrum_clock'is only used on i945.
Change-Id: I0f63f18d3f57ef8774f22ca9eb8c20dd39c56cdc
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70147
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"use_crt" and "use_lvds" are boolean, so use "true/false".
Change-Id: I5b5b42c27351331ad40fbe92fb87390cb1284aa9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70148
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After changing EC detection of S0ix from CPU_C10_GATE# to SLP_S0# in
system76/ec@cc3effb6a4 ("board/system76/common: use SLP_S0# pin for
modern standby detection"), DevSlp blocks suspend entry. Disable it
until it is fixed.
Change-Id: I586245ebf9f9d5ad08f6745a450411f194a661da
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The Galago Pro 6 (galp6) is an Alder Lake-P board.
Tested with a custom edk2 UefiPayloadPkg.
Working:
- PS/2 keyboard, touchpad
- Both DIMM slots (with NMSO480E82-3200EA00)
- M.2 NVMe SSD (with MZVL2500HCJQ)
- All USB ports
- All USB ports
- SD card reader
- Webcam
- Ethernet
- WiFi/Bluetooth
- Integrated graphics using Intel GOP driver
- Backlight controls on Windows 10 and Linux 6.1
- HDMI output
- DisplayPort output over USB-C
- Internal microphone
- Internal speakers
- Combined headphone + mic 3.5mm audio
- S0ix suspend/resume
- Booting Pop!_OS Linux 22.04 with kernel 6.0.6
- Internal flashing with flashrom v1.2-1087-gde016a17
Not working:
- Detection of devices in TBT slot on boot
Change-Id: I8940fb3777d7f18393ef50baec32f9445b375648
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The Piglin & Hoglin boards were built with a couple of different sizes
of ROM chips. Despite this, the desire was to use just a single FMD
file. The different sizes are already accounted for in Kconfig, so
add the Kconfig size here to be used.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ia75725b0c4d61e832c94160fa4cd455e89c60274
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
`python` as a command isn't universally available anymore after the
python2/python3 drama.
Change-Id: I9d68873d86dc3f044238d921c10fc434a83a76f5
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Elyes Haouas