In order to save power in S3, we remove reset gpio setting in kernel.
We still need to initialize touchscreen ic.
Do it by pulling low reset gpio for 500us and then pulling high
in firmware.
BRANCH=none
BUG=chrome-os-partner:55170
TEST=build on elm.
Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6
Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1
Original-Signed-off-by: YH Huang <yh.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/360312
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw>
Reviewed-on: https://review.coreboot.org/15719
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Asserting this GPIO will send a signal to the EC to trigger a reset
for the AP and the CR50.
BRANCH=none
BUG=chrome-os-partner:55252
TEST=the device now reboots when it needs to switch between different
boot modes instead of hanging with "failed to reboot" message.
Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7
Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/360238
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15718
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
In case of elog not being stored in CBMEM, calculate flash offset by
using rdev_mmap instead of assuming that the entire flash is mapped just
below 4GiB. This allows custom mappings of flash to correctly convert
the flash offset to mmap address.
BUG=chrome-os-partner:54186
TEST=Verified behavior on reef. mosys able to read out the elog correctly.
Change-Id: I3eacd2c9266ecc3da1bd45c86ff9d0e8153ca3f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15722
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
F2950 SBC, also known as TONK 1201/TONK 1202, was originally
produced as a Centerm F2950 using DB800 reference design. Common
configuration does include a 600 MHz GeodeLX CPU underclocked to
500 or 400 MHz, 128 or 512 MiB of RAM in the single SODIMM slot and
128 or 512 MB IDE DOM. The board does have three USB 2.0 ports
(none of them possessing debug capabilities), PS/2, VGA, Geode
audio in/out and the serial port.
EEPROM needs to be soldered out and flashed externally at the time
of this message because flashrom would neither be able to dump BIOS
correctly while running vendor BIOS nor write flash contents.
All peripherals were tested against Linux 3.16 and seem to work
flawlessly. At the moment of this commit coreboot does not pass
PCI_COMMAND_IO from the configuration space to SeaBIOS, thereby
preventing VGA OPROM from being executed. This would be fixed in
the SeaBIOS itself or in a subsequent commit. As a workaround,
user may put VGA OPROM to vgaroms/seavgabios.bin in CBFS.
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Change-Id: I93f13ecb53bd05abc0e07e0bd7ba40e646dcb4c4
Reviewed-on: https://review.coreboot.org/15565
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The API called to write the name of the child table in the
dp entry (type ACPI_DP_TYPE_CHILD) was not including the
quotes, e.g., it was DAAD and not "DAAD". Thus, the kernel driver
did not get the right information from SSDT.
Change the API to acpigen_write_string() to fix the issue.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8984e7
Reviewed-on: https://review.coreboot.org/15724
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The binutils patch went in without updating the revision,
so we need to update it now. This was done in commit bcfa7ccb
(buildgcc: Update to binutils-2.26.1 & Fix aarch64 build issue)
Change-Id: Ifad4a2e3973f1f60d0ea840945e2bd097e1b4474
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15712
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This patch adds support to wake up from S3 on lidopen.
mainboard.asl has the _PRW defined for the wakeup support
in S3.
BUG = chrome-os-partner:53992
TEST = Platform wakes up from S3 on lidopen.
Change-Id: I48b456baf5f7e1c2f28454fa66bb90ad761bb103
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15618
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since the Integrated Sensor Hub can be disabled through devicetree.cb
as a PCI device, there is no need for a separate register variable.
Remove handling the register and update mainboards' devicetrees. Also
keep ISH disabled on both Reef and Amenia.
Change-Id: I90dbf57b353ae1b80295ecf39877b10ed21de146
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15710
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
1. The hotplug feature needs to be disabled
so that pcie root ports will be disabled by fsp
2. Correct PcieRootPortEn mapping.
The correct mapping should be like below
PcieRootPortEn[0] ==> 00:14.0
PcieRootPortEn[1] ==> 00:14.1
PcieRootPortEn[2] ==> 00:13.0
PcieRootPortEn[3] ==> 00:13.1
PcieRootPortEn[4] ==> 00:13.2
PcieRootPortEn[5] ==> 00:13.3
BUG=chrome-os-partner:54288
BRANCH=None
TEST=Checked pcie root port is disabled properly
and make sure pcie ports are coalesced.
Also make sure the device will still be enabled after coalescence
when pcie on function 0 is disabled devicetree
Change-Id: I39c482a0c068ddc2cc573499480c3fe6a52dd5eb
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/15595
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds support to wake up from S3 on lidopen.
mainboard.asl has the _PRW defined for the wakeup support
in S3.
BUG = chrome-os-partner:53992
TEST = Reef board wakes up from S3 on lidopen.
Change-Id: Ic3bae26cea0642f98d938b3523d08f5902a1f4b5
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15643
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If S3 support was implemented for this platform later on, use
romstage handoff structure instead.
Change-Id: I03c1e07a7fcc17c27203d0c4e32e3958f2ba5273
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15716
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
If S3 support was implemented for this platform later on, use
romstage handoff structure instead.
Change-Id: Ib0cf3ad41753baee26354c5ed19294048e7fb533
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15715
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
The mainboards which use the Chrome EC duplicate the
same logic in the mainboard smi handler. Provide common
helper functions for those boards to utilize.
BUG=chrome-os-partner:54977
Change-Id: I0d3ad617d211ecbea302114b17ad700b935e24d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15685
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Add a function to power off the system within the halt.h header.
BUG=chrome-os-partner:54977
Change-Id: I21ca9de38d4ca67c77272031cc20f3f1d015f8fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15684
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
In the ACPI specification the PM1 register locations are well
defined, but the sleep type values are hardware specific. That
said, the Intel chipsets have been consistent with the values
they use. Therefore, provide those hardware definitions as well
a helper function for translating the hardware values to the
more high level ACPI sleep values.
BUG=chrome-os-partner:54977
Change-Id: Iaeda082e362de5d440256d05e6885b3388ffbe43
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15666
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
The SLEEP_STATE_x definitions in the chipsets utilizing
FSP 1.1. driver have the exact same values as the ACPI_Sx
definitions. The chipsets will be moved over subsequently,
but updating this first allows the per-chipset patches
to be isolated.
BUG=chrome-os-partner:54977
Change-Id: I383a9a732ef68bf2276f6149ffa5360bcdfb70b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15665
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Use the acpi_is_wakeup_s3() API instead of comparing
a raw value to a global variable. This allows for
easier refactoring.
Change-Id: I2813b5d275cbe700be713272e3a88fdb5759db99
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15690
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
The mainboard_smi_sleep() function takes ACPI sleep values
of the form S3=3, S4=4, S5=5, etc. All the chipsets ensure
that whatever hardware PM1 control register values are used
the interface to the mainboard is the same. Move all the
SMI handlers in the mainboard directory to not open code
the literal values 3 and 5 for ACPI_S3 and ACPI_S5.
There were a few notable exceptions where the code was
attempting to use the hardware values and not the common
translated values. The few users of SLEEP_STATE_X were
updated to align with ACPI_SX as those defines are
already equal. The removal of SLEEP_STATE_X defines is
forthcoming in a subsequent patch.
BUG=chrome-os-partner:54977
Change-Id: I76592c9107778cce5995e5af764760453f54dc50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15664
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Instead of open coding the literal values provide more
semantic symbol to be used. This will allow for aligning
chipset code with this as well to reduce duplication.
BUG=chrome-os-partner:54977
Change-Id: I022bf1eb258f7244f2e5aa2fb72b7b82e1900a5c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15663
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
The ramstage main() in lib/hardwaremain.c has the logic
to set the ACPI sleep state based on romstage_handoff. Thus,
there's no need to do it a second time.
Change-Id: I75172083587c8d4457c1466edb88d400f7ef2dd0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15662
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The ramstage main() in lib/hardwaremain.c has the logic
to set the ACPI sleep state based on romstage_handoff. Thus,
there's no need to do it a second time.
Change-Id: I88af301024fd6f868f494a737d2cce14d85f8241
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15661
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
CBMEM should be placed at the top of RAM, which can be found by parsing
the configuration string. Configuration string parsing isn't yet
implemented, so I'll hard-code the CBMEM location for now.
Change-Id: If4092d094a856f6783887c062d6682dd13a73b8f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15284
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This fills up the RO_FRID, RW_FWID_A and RW_FWID_B FMAP sections with
the relevant version from KERNELVERSION, padded to the right size and
gap-filled with zeros.
Change-Id: I45c724555f8e41be02b92ef2990bf6710be805c2
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15604
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
rk3399 sdram size is 192K, and there still some unused space.
We need more romstage space to include the sdram config, so extend
the romstage range.
BRANCH=none
BUG=chrome-os-partner:54871
TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass
Change-Id: Ib827345fe646e985773e6ce3e98ac3f64317fffb
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 626ab15bb4ebb004d5294b948bbdecc77a72a484
Original-Change-Id: Ib5aa1e1b942cde8d9476773f5a84ac70bb830c80
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/359092
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15660
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
YH Huang