The ThinkPad X220i is essentially identical to the ThinkPad X220 but it
has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the
VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard
directory and setting the VGA_BIOS_ID in Kconfig.
Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-on: https://review.coreboot.org/13594
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Some of the pins are not connected/used on kunimitsu board,
this patch will make them "Not connected".
Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and
GPIO TX/RX will be disabled.
BRANCH=none
BUG=none
TEST=Build and booted in kunimitsu.
Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488
Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316700
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/13629
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
While the board configuration still works without this,
It's nicer to have the device statically defined since
the NIC is hardwired to the board.
Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13455
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
As the audio card needs 1.8V I2C operation. This patch adds
entry into devicetree.cb to set I2C port 4 operate at 1.8V.
TEST=Built & booted lars board. Verified that I2C
port 4 is operating at 1.8V level
Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c
Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321000
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable the option to back up Vboot non-volatile data from CMOS
to flash as these boards have the necessary nvram fmap region
and are using vboot2 which does not backup to the TPM.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45
Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324123
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13601
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The developer mode gpio switch on rialto is always hardcoded (through a
resistor) as developer mode. We need to ignore it to allow transitions to
verified mode with the virtual developer mode stuff.
TEST=We can now exit dev mode on rialto
Change-Id: I94a949f0973132de5fd008224af79cf612151193
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b
Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325861
Original-Commit-Ready: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13626
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
kunimitisu platform updated these two fields if maxim codec
is detected.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10
Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324631
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13603
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work
around Jenkins failures caused by an unmodified clone.
Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13521
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Stop blinking when coming out of standby.
- Remove code to set blink when going into S3. This never
worked correctly.
Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13171
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Add the files to build soc/intel/quark and mainboard/intel/galileo for a
minimal coreboot image. Please note that this configuration does not
run. Include HTML documentation for the Galileo Gen 2 board.
Testing is successful if build completes successfully.
TEST=Build for Galileo
Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13507
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
These devicetree patches set the ACPI PM Disabled variable to 1.
This will disable the ACPI PM timer and remove from FADT table.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce
Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319362
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=None
Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9
Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324075
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13585
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built kunimitsu w/ separate verstage.
Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6
Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324074
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13584
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built glados w/ separate verstage and booted.
Change-Id: I626a500c183d21f94d976e24f09af15a242fba9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b564514a8b93f53a919fcdac3589e30dbac82124
Original-Change-Id: Icc989ec5700b3f1a144a6b41198b7dd2c2aac6f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324073
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13583
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell w/ separate verstage and booted.
Change-Id: Ic728c2904006376fdc2b27b512f72173a2260be3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d190af8996fea894305ebe686afbfda5f2b8a5
Original-Change-Id: I95aeb97737d0ddfa6c53269c9d14db16ed5e47cc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324072
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13582
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes some spelling and whitespace issues that I came across
while working on various things in the tree.
There are no functional changes.
Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add CONFIG_ prefix to two symbols.
- Remove the use of the third symbol as it will never be matched.
Change-Id: Ifa7f6884001cb05fb8397f193c4b08a0161f498c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13539
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Under certain conditions when the APs are still executing during
MCT setup the system can hang. This was the root cause of most
of the S3 resume failures on this platform; waiting for AP stop
before MCT setup allows for reliable S3 resume.
Change-Id: I329eea9a8912d7b57efe6aae327d24fd6c3fd782
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13169
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
On certain Winbond SuperIO devices, when a PS/2 mouse is not
present on the auxiliary channel both channels will cease to
function if the auxiliary channel is probed while the primary
channel is active. Therefore, knowledge of mouse presence
must be gathered by coreboot during early boot, and used to
enable or disable the auxiliary PS/2 port before control is
passed to the operating system.
Add auxiliary channel PS/2 device presence detect, and update
the Winbond W83667HG-A driver to flag the auxiliary channel as
disabled if no device was detected.
Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The IOMMU/HT device was not routed correctly; add the proper APIC
mappting to the mptable generation code. Also clarify comments
surrounding the pin mappings.
Change-Id: I72ceb0f22dabdfa71a1f6231ccb841face08ff7a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13163
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
since commit f1e321001d, the UART init
should be in bootblock_mainboard_early_init() which runs before
console init. (see src/lib/bootblock.c)
Change-Id: Ib00afdd6e81e7689fbd743c8a5f547d424896d71
Reviewed-on: https://review.coreboot.org/13448
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Move the default select of "Use native graphics initialization" for
Peppy to the ChromeOS section as SeaBIOS (default payload) requires a
vBIOS and takes twice as long to load with this option enabled. For the
same reasons, this option shouldn't be enabled by default (def_bool y).
Change-Id: I1f2163e0a1e4bf8e5041dad150bdf7de804fb4db
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/13493
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The KGPE-D16 supports an optional MIO audio card, which connects
to the on-board HDA interface of the SP5100.
Enable the HDA interface for use with the MIO card.
Change-Id: Idfe069f4bce7b94a7460bc7fcdd378eb57e51fda
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13152
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Previously with errors in the ram init, early cbmem was disabled.
Now that the ram is working correctly, set as early cbmem platform
and update all (1) boards to use it.
Tested on GA-G41M-ES2L
Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13131
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Just rename the two scripts that are in the src/ tree to give them
a .sh extension. Since we generally expect files in the src directory
to be source files, this allows to identify these as scripts easily.
Change-Id: I0ab20a083880370164488d37a752ba2d5a192fdc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13432
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fish bowl HTML5 graphics benchmark with 250 fish
is not reaching 60 FPS. This change will update
the DPTF parameters to accommodate this test.
TEST=Run fish bowl benchmark with 250 fish
and check for 60 FPS.
Change-Id: I6b6827199cb0f5ab44c354abc477ea73e4de9ec5
Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/302208
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13484
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Disabling S5 wake from touch panel and trackpad
TEST=Build and boot the platform.
TEST=Poweroff platform -> enter PG3 -> remove AC -> close Lid
Plug AC in -> EC boots up and AP will shutdown the platform
and open Lid -> platform boots to OS.
Change-Id: I7b661a9f1327b97d904bac40e78612648f353e39
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/288970
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Reviewed-on: https://review.coreboot.org/13425
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East
community are in two ranges - 0: INT33FF:02 GPIOS [373 - 384]
PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26]
The discontinuity was not accounted for, hence the error.Original
offset was 0x16 whereas it should be 0x13
TEST=Run crossystem and test wpsw_cur entry. If screw is present,
it should be 1 and if not present, it should be 0
Change-Id: I29e19589b3a358a42818afbc6d017d6cbc6a9c4c
Original-Signed-off-by: Kumar, Gomathi <gomathi.kumar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291572
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Icarus W Sparry <icarus.w.sparry@intel.com>
Reviewed-on: https://review.coreboot.org/13424
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Read GPIO to get the status
Change-Id: Id2d56ce4b47c4cccba2de3f113afaee6c49885c9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/13186
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Configuring UPD PcdCaMirrorEn. This is a board specific parameter.
CA mirror is the Command Address mirroring option that is enabled
on this board
CQ-DEPEND=CL:13038
Original-Reviewed-on: https://chromium-review.googlesource.com/309190
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I05174e18d650332d838e5036c713e91c4840ee75
Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/12749
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
