Audio DMIC_CLK needs to be ON in S0ix to support Wake on Voice.
So, configuring GPIO_171 to be as IGNORE IOSSTATE, so that
clock is ON in S0ix state.
BUG=None
TEST=put DUT in S0ix, verified DMIC_CLK
in scope when wov capture path is ON
Change-Id: I147cf3c12acb11429c6cb234e8c511f57886b6b4
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/22675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This partially reverts commit a7b97510ae.
For the internal eMMC to be used by Windows for installation,
the CARD device and _RMV methods are required. Without them,
Windows does not see/show the eMMC as a valid installation
target.
TEST: boot google/chell with Tianocore payload and install
Windows 10 to the internal eMMC drive.
Change-Id: I04819ff16ab4cb0d2ea6e1c7f47179f5dacb7cfd
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/22684
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Table intr_types[] is hard to maintain, and has unused spaces filled with
NULL. A new table format is needed that creates strong association between
the APIC register index and the associated IRQ name, is easy to maintain
and has no unused space (index) to indicate that a particular register is
unused while still indicating which registers are valid.
Also, the string that defines the name of associated IRQ should be declared
with "#define" in a header, but must be physically initiated in a source
file. The "#define" must make a strong association between the used register
index and the associated IRQ name. Example:
#define INDEX_0X16_NAME "PerMon\t"
BUG=b:69868534
TEST=Check serial output against BKDG for AMD Family 15h Models 70h-7Fh
Processors definitions for Pci_Intr_Index. Also, check for new output
format to confirm write_pci_int_table() is working as desired. There's
no test for write_pci_cfg_irqs, as it's not being used by kahlee.
Change-Id: I2dde4d016cc3228e50dcfadd2d3586a3609e608d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This include is not needed, and the header file is going away in
vboot_reference. So, remove it.
BUG=chromium:789276
BRANCH=none
TEST=emerge-reef coreboot
Change-Id: Ie0b37ae3d2f979f79060a15ca3f7157f49c89785
Signed-off-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Randall Spangler <randall@spanglers.com>
Reviewed-on: https://review.coreboot.org/22733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This option should've been selected by RK3399 the whole time since the
SoC supports the <soc/gpio.h> interface. It wasn't really a big deal
until now where I'm trying to use a the base2 read helper, though.
Change-Id: Ib7a5f00a6680163105fc0598ce77d03f3645f05a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22744
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support to read the SKU ID entry from the coreboot table
that was recently added in coreboot.
Change-Id: I1c3b375da6119a4f8e8e7e25a11644becb90f927
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22743
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On many recent Chrome OS boards, the desire to unite more configurations
under the same image has led to the need of a "SKU ID" that identifies
different configurations of the same board (e.g. with certain optional
components stuffed or not stuffed, or replaced with a comparable
component). This is markedly different from the existing "board ID",
because that is reserved to count "revisions" -- changes made to the
same configuration over time during the development process. This patch
adds support to have a mainboard define this SKU ID and pass it through
the coreboot table like we already have for board IDs.
Change-Id: I8aabffe8e1003b0d6fb70d689ae513ca4b46aeda
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22696
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch switches the board_id and ram_code helper framework to use
weak functions rather than Kconfigs to determine whether the board
supplies these IDs. This cuts down on the amount of boilerplate Kconfigs
many boards have to set and also gives them more flexibility, such as
being able to determine at runtime whether a given ID is present.
Change-Id: I97d6d1103ebb2a2a7cf1ecfc45709c7e8c1a5cb0
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22695
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch mirrors recent cleanups in coreboot regarding the strapping
ID entries in the coreboot table.
Change-Id: Ia5c3728daf2cb317f8e2bc72c6f1714d6cb4d080
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Merge the different coreboot table strapping ID structures into one
because they're really just all the same, and I want to add more. Make
the signature of the board_id() function return a uint32_t because
that's also what goes in the coreboot table. Add a printk to the generic
code handling strapping IDs in ramstage so that not every individual
mainboard implementation needs its own print. (In turn, remove one such
print from fsp1_1 code because it's in the way of my next patch.)
Change-Id: Ib9563edf07b623a586a4dc168fe357564c5e68b5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BOARD_ID_MANUAL and BOARD_ID_STRING options were introduced for the
Urara board which is now long dead, and have never been used anywhere
else. They were trying to do something that we usually handle with a
separate SKU ID these days, whereas BOARD_ID is supposed to be reserved
for different revisions of the same board/SKU. Get rid of it to make
further refactoring of other options easier.
Also shove some stuff back into the Urara mainboard that should've never
crept into generic headers.
Change-Id: I4e7018066eadb38bced96d8eca2ffd4f0dd17110
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22694
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Variants nautilus and soraka currently provide the exact same
definition for variant_cros_gpios as provided by the baseboard. This
change removes the function defintions from variants so that the weak
definition in baseboard can be used.
Change-Id: Ic88623f34039792f0f9fb46842b24e4f1290981b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22705
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds a new config option VARIANT_HAS_CAMERA_ACPI to allow
variants to define ACPI tables for camera support. It also prevents
boards that do not need this from unnecessarily providing dummy files
for camera ACPI support.
Change-Id: I91f8e407e0f021071eeadbde8c2695e2a6d69e06
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change the prefix for TPM options from POPPY_USE_* to
VARIANT_HAS_*. This makes it clear that these are variant specific
options.
Change-Id: I6fd120a34a5b0c1f018164d5c2b60548da1d0f61
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to allow variants to select different Kconfig options, this
change adds VARIANT_SPECIFIC_OPTIONS_${VARIANT_NAME} which can be
selected by each variant in Kcnonfig.name.
Change-Id: I15db2fdac5c9e55f9698c8a0c083d6467afae245
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change removes the dynamic disabling of TPM based on config
options. Poppy and its variants will have only one type of TPM
supported and so there is no need to update it dynamically.
Change-Id: Ie82825fcf7092e845583edaac9ba0d3fc9d1dd80
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22704
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set the USB over current pins for the Grunt baseboard and
Kahlee mainboard. Removes the ACPI ASL OC code, which is not
used on Stoney Ridge SOC.
BUG=b:69229635
TEST=Build and boot Kahlee. Not tested with OC test fixture.
Change-Id: I5a9b3409d9c91b89fd02f8eecf9e04c435f14342
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/22679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add USB overcurrent support. Adds a weak call for mainboards
that don't suport USB OC.
BUG=b:69229635
Change-Id: Ie54c7a2baa78f21cf1cd30d5ed70c8c832cf3674
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/22678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
There is some confusion with old RAMID table, make it clear,
and let's no longer tangle it in future.
Change-Id: I44215b4a6668074575a5df691ac1ff8fa3d15492
Signed-off-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/22663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
After applying this change, /dev/tpm0 is visible inside GNU/Linux
with kernel 4.9.51-1 from Debian, and there is a menu item shown
inside SeaBIOS' (master only) interface if ESC is pressed.
The TPM is confirmed working with [Heads](https://github.com/osresearch/heads).
Change-Id: I3b845928954d203d1c3608b6704fedbd590e1fa9
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/22602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In preparation to deleting early_setup,c, transfer all functions except
those related to wide IO to southbridge.c.
BUG=b:64033893
TEST=Build and boot to OS.
Change-Id: Ibe1d87cb3e0eb3e8ed4d2dc2adbddf2e13557c9e
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch enables WOL feature.
BUG=b:69290148
BRANCH=None
TEST=powerd_dbus_suspend && sudo etherwake -i eth0 $MAC to make sure
the system could be woken up by WOL packet.
Change-Id: I1178a776db2cdb448fe6650d49ae6c0281ac1128
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/22606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Fix a regression introduced by #212270709dc04
(ec/lenovo/h8/acpi/thermal: Add ACPI fan control).
The commit caused Windows to crash as EC reads aren't allowed in the fan
device or it's powerresource's methods. Implement the same approach as all
other platforms using a GNVS variable named FLVL instead of reading from EC.
In addition to EC reads writing to FIELD elements, in another ACPI scope,
seems to be broken. Introduce a new method to set the fan disengage mode.
Tested on Windows 7 and Lenovo T500.
Change-Id: Ia99f8814ac14194578dcd1aa50a63e3f35c042dd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Replace the unused DTS2 field with FLVL (fan level).
Required to use the fan level on all thinkpads to store and retrieve the
current fan level.
Possible additional use case is to modify the fan level from a SMI handler.
Change-Id: I1ee5348d24b018ab1b61067813c1db63d6706c12
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22513
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Lava numbers are in.
BUG=b:69990330
BRANCH=none
TEST=verified that USB signal is within spec
Change-Id: I7416ec8d058271700ebe43f8d92af61c6c0d6b42
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/22661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quantatw.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add ACPI declarations to be incorporated into ACPI tables for
mainboards with this super I/O.
Change-Id: If113807901619bc0f4250607546be415f9e5e45b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
1. Programs PNP values for AUNIT, BUNIT & TUNIT registers
as per reference code.
2. A new configuration option pnp_settings is introduced in
devicetree.cb to select PNP settings among performance,
power, power & performance.
TEST = built and booted glkrvp, verfied that the callback gets
control, verified warm and cold reboots.
Change-Id: Ibd70a42c9406941c8a93cc972f22c2475e9d0200
Signed-off-by: Divya Chellap <divya.chellappa@intel.com>
Reviewed-on: https://review.coreboot.org/22488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
coreboot only maintains a single trap entry, because it only runs in
machine mode.
Change-Id: I7324d9c8897d5c4e9d4784e7bc2a055890eab698
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The code dealing with the old config string isn't needed anymore,
because the config string has been deprecated in favor of
OpenFirmware-derived devicetrees.
Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This Supervisor Binary Interface, which is based on a page of code
that's provided to operating systems by the M-mode software, has been
superseded by a different (currently not really documented) SBI, which
is based on directly executing ECALLs instructions. Thus some of our
code becomes obsolete. Just rip it out until we implement the new SBI.
Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/22593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Aamir Bohra