This replaces GPLv2-or-later and GPLv2-only long form text with the
short SPDX identifiers.
Commands used:
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Also split "this is part of" line from copyright notices.
Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
That makes it easier to identify "license only" headers (because they
are now license only)
Script line used for that:
perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist...
Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Every device belongs to a chip. And we already keep that relation by
inheriting the `.chip_info` pointer if downstream devices don't have
another chip specified. So we can also allow to specify `register`
settings at the device level.
Change-Id: I44e6b95d0cd708fef69b152ebc46b869b2bb9205
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40803
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It was always defined to the same value, and only used twice.
Change-Id: I2736eb7ea2cf15475f7bb99d7d12450730eb8be0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40864
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves all ACPI table support in coreboot currently living
under arch/x86 into common code to make it architecture
independent. ACPI table generation is not really tied to any
architecture and hence it makes sense to move this to its own
directory.
In order to make it easier to review, this change is being split into
multiple CLs. This is change 3/5 which basically is generated by
running the following command:
$ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g'
BUG=b:155428745
Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
It replicates the functionality of savedefconfig because back when the
script was added, savedefconfig didn't work for us. It now does, is
the official way of doing things, is recommended in our documentation
and is also a fair bit faster.
Change-Id: Ia8e0377537ff7cd638c564037ea6a77b01a87243
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Update all occurrences of vboot and spell it lowercase.
Change-Id: I432b0db8a3dda43b71844e557a3d89180f25f1c3
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There are microcodes in .inc format out in the wild which contains
lines with just a comment. So these files look like the following
example:
; External header
dd 000000001h
dd 00000001bh
...
; Data
dd 000000000h
...
The lines with just a comment starts with a ';' and will break
the current awk formatting which is performed to reformat the content
into C code style. As we are just interested in the data we can simply
drop all lines that start with a ';' which sed can do pretty easy.
Change-Id: I9ff5db51667672cffd9d776fb9497962b4a6083a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The double quotes around the remaining shell parameters '${@:2}' causes
that the provided *.h files in $(CONFIG_CPU_MICROCODE_HEADER_FILES),
which is a space separated list, cannot be broken down to every single
file as needed but stay as a single parameter in the for-loop.
Therefore, the called function 'include_file' will get a single
parameter with all files which will lead to a broken C code in
terms of a wrong #include-syntax. This causes the script to fail.
To fix this remove the double quotes which works just fine.
Change-Id: Iab7b0dc8d850973d6af764899907d383e9ec7743
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Newly added code in commit CB:25546 contains spaces instead of TABs for
line indent. Replace every 4 spaces by a single TAB to match our coding
guides.
Change-Id: Ie3633bb42643f4abb5f1a8827a7dc2c9e023d6aa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40564
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Remove entries for old utilities and add entries for new ones.
Generated using util/util_readme, with some tweaks to preserve the
markdown.
Change-Id: I3a4d8a6bf15a677aa07aa72b8809328110fb72da
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CB:29744 ("util/cbfstool: Add optional argument ibb") added support
for non-ASCII characters for long_options. However, there is a check
later on which errors out since this character is not one of the
commands[i].optstring.
This change adds a function valid_opt() which does the following
things:
1. Checks if the returned optchar is among the list of optstring
supported by the command.
2. Checks if the returned optchar is a valid non-ASCII
option. Currently, we do not maintain a list of non-ASCII options
supported by each command. So, this function returns true if the
optchar returned by getopt_long falls within the allowed range.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I27a4f9af9850e4c892573202904fa9e5fbb64df6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
DSDT can be bigger than 0x10000 bytes, so increase the space up to 1MB
for an ACPI table and support lines in acpidump.log with address
higher than 0x10000.
Change-Id: Iaadcfd0964c1c516e9e39d6cbfe41ec9a8c45e9d
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31759
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To provide sane defaults for most of the user base, this patch switches
on the USE_BLOBS option by default. Since it only changes the default,
this behaviour can still be easily disabled.
With this abuild doesn't have to select USE_BLOBS any more, so what
abuild tests becomes the coreboot default again.
Change-Id: Ia0632b9ae7a1f212a8640b3faec2695d17d238c5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
'result' is already defined as 'unsigned long long result = 0;' so no
need to re-write 'result = 0;'.
Change-Id: Ie897453fb5e7b09af755ce8d61ee8e80943ffc1c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We can make our lifes much easier by removing its dependency on
`ADD_FSP_BINARIES`. Instead, we imply the latter if the repository
is to be used. We can also hide a lot of unnecessary prompts in
this case.
Also, remove default overrides and selects for the two that are
now unnecessary.
Change-Id: I8538f2e966adc9da0fbea2250c954d86e42dfeb3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39882
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's helpful to see the sibling field, even when it's NULL, when
debugging the static.c output from a devictree.cb file. Ensure the
NULL fields are emitted for fullness.
Change-Id: Ib6d5b8164769a6512e762d5a525c7df1f429c866
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently, there are a lot of uploads in the board status repository,
where the logs say, that the coreboot image or payload were built from a
dirty source tree. Add a check to reject such uploads.
Change-Id: I920e26a10f74e1f3b9b4e5f8c9284c59692a519b
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The `link_frequency_270_mhz` setting was originally used by the native
graphics init code for Sandy/Ivy Bridge, which is long gone.
The value of this information (which board had it set) is questionable.
The only board that had an LVDS panel and set it to 0 was the ThinkPad
L520, where native graphics init was never reported to work. Also, the
native graphics init only used it for calculations, but never confi-
gured the hardware to use a specific frequency. A look into the docu-
mentation also doesn't reveal any straps that could be used to confi-
gure it.
Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the inteltool path to the include path to be able to avoid ugly
include hacks like `#include "../inteltool.h"`.
Change-Id: Id363fa20fe3b52248a224ca14b2626a8e3ce44a2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39744
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a script generated list of vboot enabled devices to the
documentation. Add a entry to the release checklist.
Change-Id: Ibb57d26c5f0cb8efd27ca9a97fd762c25b566f93
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Currently cbfstool cherry-picks a few files from vboot and hopes these
files will work standalone without any dependencies. This is pretty
brittle (for example, CL:2084062 will break it), and could be improved
by building the whole vboot library and then linking against it.
Therefore, this patch creates a new target $(VBOOT_HOSTLIB) and includes
it as a dependency for cbfstool and ifittool.
To prevent building the vboot lib twice (one for cbfstool and the other
for futility) when building coreboot tools together, add the variable
'VBOOT_BUILD' in Makefile to define a shared build path among different
tools so that vboot files don't need to be recompiled.
Also ignore *.o.d and *.a for vboot library.
BRANCH=none
BUG=none
TEST=make -C util/cbfstool
TEST=make -C util/futility
TEST=Run 'make tools' and make sure common files such as 2sha1.c are
compiled only once
TEST=emerge-nami coreboot-utils
Change-Id: Ifc826896d895f53d69ea559a88f75672c2ec3146
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This adds the code required to dump config registers.
Change-Id: Ic78f847ba07240c112492229f9a23f9a88275ad9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The single apostrophe confuses the shell that's calling the command.
Change-Id: I7d3183e9a612de0121b2d208c06a45645b8d67f6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Split common flags that are not specific to the C language out of
$CFLAGS_GCC into $FLAGS_GCC. This way, we can test for C specific
flags, too, without adding them to $ADAFLAGS_*. Currently this is
done for `-Wno-address-of-packed-member` which only applies to C.
Change-Id: Ib793c62656efb07b6e5b3385f1ed1c96a40efd1d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39633
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Additionally provide a simple script for decoding spd hex files using bincfg.
BUG=b:148561711
TEST=Decoded spd files in zork
BRANCH=None
Change-Id: Ic62868d59e075fd6816d7be55cc935e3e3f82499
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://chromium-review.googlesource.com/2067697
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Uppercase `AFE` is an acronym for `Analog Front-End`. As it is a valid
spelling, comment out its entry to prevent false positives.
Change-Id: Ib8612d970d33d4955c572838bda217cfdb49dfe6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
If they were removed instead, it would be too easy to end up adding them
back again. They are kept in a comment so that they can be tracked.
Also, explain why these two entries have been commented out.
Change-Id: I8225944b5e3d1e022af169dda33e0344d4c3bccd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The existing Sunrise Point ids are assigned to the wrong implementation,
which would never work for these chipsets. Assign them to the right
dumping implementation, which works for both Sunrise Point PCH-H and
PCH-LP.
This also adds some missing device ids from doc#332691-003EN and
doc#334659-005.
Change-Id: Id102ef3809d675dc9a915d2cb3062e093487fa27
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There is no need to use hexadecimal values in azalia codec IDs, nor need
to print a redundant "LPC bridge PCI-LPC bridge" comment.
Change-Id: I6658051c7a3d5b65a86ccca8bab7834bf4628a16
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Print out the name of the file that failed to open.
BUG=none
TEST=rerun build-board.sh with missing files
BRANCH=none
Signed-off-by: Eric Peers <epeers@google.com>
Change-Id: Id8543f25ea827fc8764e0315434b834e65bfa7fb
Reviewed-on: https://chromium-review.googlesource.com/2090667
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add a bunch of missing chipsets to print_bioscntl.
Change-Id: I96c010a1d64dcf5296f78a6decd1a218aba4b04f
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This adds the Sunrise Point AHCI config and SIR registers from
doc#332691-003EN.
Change-Id: Id4a462d625194a6ccfdb88fb415d5eb278f2900a
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39506
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds the code required to dump config and SIR registers.
Change-Id: I3726c52d415ff4dd6b19513b310f11254f7fbf92
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39560
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rework AHCI to align the code with the rest of inteltool.
Change-Id: I37116f8e269d0376e147dd6de7365c45ac90bda0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39504
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
So far printing the GPIO groups chose the community definition. As the
list of supported platforms grows the massive switch case gets repetetive
and hinders the readers view.
It also reduces the ability to reuse the code in a potential libinteltool.
To takle these issues the detection logic was split into its own function.
Change-Id: I215c1b7d6ec164b8afd9489ebd54b63d3df50cb9
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38631
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
So far all group and community definitions live in one big c file.
This 2500 line file slowly grows to a size, where readability is lost.
Also the definitions are not reusable in a potential libinteltool.
This commit moved the Denverton definitions into its own header.
Change-Id: I6ce672c24059b9f3a4a984766184066f14df3013
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38630
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
So far all group and community definitions live in one big c file.
This 2500 line file slowly grows to a size, where readability is lost.
Also the definitions are not reusable in a potential libinteltool.
This commit moves the Lewisburg definitions into its own header.
Change-Id: I7900f1d8b3ca022112874ac2fa7326d538166008
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38629
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
So far all group and community definitions live in one big c file.
This 2500 line file slowly grows to a size, where readability is lost.
Also the definitions are not reusable in a potential libinteltool.
This commit moves the Sunrise Point and Sunrise Point LP definitions
into its own header.
Change-Id: I06efbee700f1525770365428fb85ef700ac53b80
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38628
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
So far all group and community definitions live in one big c file.
This 2500 line file slowly grows to a size, where readability is lost.
Also the definitions are not reusable in a potential libinteltool.
This commit moves the Apollo Lake definitions into its own header.
Change-Id: I44b21092f5495f758c1f2151a913c074dfc658f5
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38627
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Patrick Georgi