Set FD bit if xHCI is disabled in devicetree.
Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch appends a unit (milliseconds) to time-out macro names for
better understanding the code which is using the macros.
Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides an increased timeout (60ms -> 1s) for SPI
HW-sequencing flash erase operations. Without that the erase for MRC
cache writing on siemens/mc_bdx1 sometimes goes wrong because the
timeout stops waiting for flash cycle completion. It was found
during continuous integration. Investigation showed that the used flash
type takes sporadic (e.g. 5% of the test cycles) more time for completion
of erasing operation if the ambient temperature increases. The measured
time values are in range of data sheet of SPI flash. 60ms is a typical
value. So increasing the value is necessary.
tested on siemens/bdx1; measured time values with increased ambient
temperature of flash were always smaller than worst case value of 1s.
Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx:
Detect if the southbridge supports AHCI) but we forgot to update the
`chip.h` and devicetrees.
Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The processor P_BLK doesn't support throttling. This behaviour could be
emulated with SMM, but instead just update the FADT to indicate no support
for legacy I/O based throttling using P_CNT.
We have _PTC defined in SSDT, which should be used in favour of P_CNT by
ACPI aware OS, so this change has no effect on modern OS.
Drop all occurences of p_cnt_throttling_supported and update autoport
to not generate it any more.
Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This bit shift attempts to set bits 8 and 9 of the byte variable (counting
from 0). However, as the name suggests, this variable is only 8 bits
wide, so the shift does nothing. Reading section 7.5 of the
AMD SB800-Series Southbridges Register Programming Requirements manual,
bits 8 and 9 are already set by default, so we can remove the bit shift.
(Alternatively, we could try setting the corresponding bits one byte
higher in 0xF1 if needed.)
Change-Id: I645236441e02925ee01339378d213cb343027363
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229582
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Implicit fall throughs are a perpetual source of bugs and Coverity Scan
issues, so let's squash them once and for all. GCC can flag implicit fall
throughs using the -Wimplicit-fallthrough warning, and this should
ensure no more enter the code base. However, many fall throughs are
intentional, and we can use the following comment style to have GCC
suppress the warning.
switch (x) {
case 1:
y += 1;
/* fall through */
case 2:
y += 2;
/* fall through - but this time with an explanation */
default:
y += 3;
}
This patch adds comments for all remaining intentional fall throughs,
and tweaks some existing fall through comments to fit the syntax that
GCC expects.
Change-Id: I1d75637a434a955a58d166ad203e49620d7395ed
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Taken from
"Intel 6 Series Chipset and Intel C200 Series Chipset"
Document Number: 324645-006 and
"Intel 5 Series Chipset and Intel 3400 Series Chipset"
Document Number: 322169-004 and
"Intel 6 Series Chipset"
Document Number: 324645-001.
UPDCR was found in GNU/Linux's drivers/pci/quirks.c.
DMC2 was guessed as it's close to DMC and defined for 5 series chipset.
Test:
Run BUILD_TIMELESS=1 and compared the coreboot.roms, no differences.
Change-Id: I4fed7c38078cabd4308424c7547416e87c9e6fa7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The code currently checks that 4 <= dev_index <= 10, which after
subtraction by 4 can index into an array of length at most 7. This is
fine for the largest cpl array (which does have length 7), but is
too large for some of the others, which are smaller. This adds bounds
checks for each array access to ensure they are all within bounds.
Change-Id: I1610d35ca6cbb6cfb42c251e75b0e8b22b64252b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229676
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Move the SMM lock outside the function as it is renamed.
Replace conditional !PARALLEL_MP with SMM_ASEG to better
reflect the use.
Change-Id: I93bf0d2f711f94a5bb741bdcd92c1e0fec228684
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
There are two hard things in computer science: cache invalidation,
naming things, and off-by-one errors. -- Anonymous
var_num records the number of initialized entries in the reg_var array.
However, this means the index of the last initialized element is one
less than the value of var_num, so we need to take that into account
when indexing into the array. This has already been fixed in several
other places (eg. sb/amd/pi/hudson/lpc.c), so let's also do so here.
Change-Id: Ibefabaca42866a3f2b22eff979c73badf86ac317
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
In our codebase, this is only coupled with intel/e7505.
The PCI registers reference here were for intel/i945.
Also aseg_smm_lock() was previously not called.
Change-Id: I21d991c8c2f5c2dde1f148fd80963e39d9836d3c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34149
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These printk() statements were added in commit cdc526e582
(southbridge/nvidia/ck804: Fix boot hang on ASUS KFSN4-DRE w/ K8 CPU)
when debugging another issue. They have undefined reads if ck804_num
is 0 and aren't needed anymore, so drop them.
Change-Id: I80b775370ac6485958948f0bff4510755a6cd2b8
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 137058{1,3}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33459
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This southbridge code may be built with either ASEG or TSEG.
Fix minor collision in namespaces.
Change-Id: I04f90fb308c280621a3037fee4bece1e5655480e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is really an inverse of SMM_TSEG to flag
platforms that should potentially move away
from ASEG implementation.
Change-Id: I3b9007c55c75a59a9e6acc0a0e701300f7d21f87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This also removes the relevant RCBA replays the mainboard dir.
Change-Id: I75dd9d1bcd09d835f205a51c087d52ebb4e166f6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Thomas Heijligen <src@posteo.de>
This adds a common place to set the final opprefix, optype and opmenu,
with a hook to override the opmenu.
Change-Id: I162ae6bad7da3ea02b96854ee28e70594e210947
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Like the line above it, this should be & instead of | (otherwise it will
always incorrectly return true). spi_locked() is only used internally to
decide which opcodes will be used to talk to the flash, and if it is
falsely reported as locked, the worst case should be a denial of service
(unless there are more bugs).
Change-Id: I5208b523c815d15d7263594f06ccfacd8a9510b1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It looks like in days gone by that these switches were once parts of
loops that incremented 'index' as they went along. However, we don't
have any loops anymore, so remove the needless increments and streamline
the rest of the assignments.
Change-Id: Iaabee984333c273af7810f9c11ed26bbb2a995d1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This function attempts to set bits in the 20s of state and state_save,
which won't work since those variables are only 16 bits wide. Extend
them to 32 bits to capture all the bit operations.
Change-Id: I5616a2d879a85ff5f57af5af20384516659c62d6
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1347384
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Set up generic decode ranges based on the devicetree settings.
Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
TODO: There is no reason to do this in SMM.
Change-Id: I8bbb2f65bbe674bd1bc4ae8a4086bd1f5e9a79fa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33139
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel Braswell supports i2c block writes using SMBus controller.
This support is missing in actual smbus routines.
Add do_i2c_block_write() which is a based on do_smbus_block_write() but
also write first byte to SMBHSTDAT1.
The caller needs to configure the SMBus controller in i2c mode.
In i2c mode SMBus controller will send the next sequence:
SMBXINTADD, SMBHSTDAT1, SMBBLKDAT .. SMBBLKDAT
To ensure the the command is send over the bus the SMBHSTCMD register must
be written also
BUG=N/A
TEST=Config eDP for LCD display on Facebook FBG-1701
Change-Id: I40f8c0f5257a62398189f36892b8159052481693
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
LONG_FADT is not used at all. So remove it and use sizeof(acpi_fadt_t) for
header length.
Change-Id: I433d1b2e0f3b9505d7c52eb14f1a476fbe52a284
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
data &= !BIT0 will clear data, since !BIT0 evaluates to 0 (oops). We
only want to clear bit 0, not the whole thing, so use bitwise negation
instead.
Change-Id: I2179119e0d2d4aceaf4f8b499bf4c5baf4ef677f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1241812
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This was done to update the global variable g_ichspi_lock but this is
now removed in favor of reading the lock bit during runtime instead of
keeping track of the state.
Change-Id: I8cb69a152b0e050d64d8979ee92de2d24136f8dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33390
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The SPI swseq controller can be locked in other parts of the code, for
instance when it's locked down in the finalize section. The driver
has to be made aware of that. The simpler solution is to not keep
track of the state and simply read out the lock bit on each SPI
transfer.
Change-Id: Ifcd5121b89d6f80fc1c1368786982d0d9fa1bf61
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This allows to port C_ENVIRONMENT_BOOTBLOCK to sandybridge separately
from nehalem.
Change-Id: If3c6619cf22d1e2995eb19823b0f3f969d252b3b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This automatically detects whether the southbridge supports AHCI.
If AHCI support is selected it will be used unless "sata_no_ahci" is
set in the devicetree to override the behavior.
Change-Id: I8d9f4e63ae8b2862c422938f3103c44e761bcda4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This allows to use the CONFIG_CONSOLE_SPI_FLASH.
Change-Id: I563c69ce6337d46380f889f42633e858ac207916
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Nico Huber