No longer include northbridge files directly in the source for
mainboard romstage.c and fix includes.
Also make required adjustments to function declarations.
Change-Id: Iafdcc0766ed44c64cc628e5935eef2c6372f5f22
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/906
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
It takes about 3 seconds to scrub 8GiB DDR266 RAM.
After ECC scrub XIP cache is disabled for system stability. There is
very little to do in romstage after ECC scrub, especially when RAM
debug messages are turned off. So the delay caused by this is hardly
noticeable.
Cache for complete ROM is re-enabled before ramstage is decompressed,
and it has no unstability issues. So the code required to re-enable
cache for ROM currently already exists in cache-as-ram_ht.inc.
A Kconfig option HW_SCRUBBER enables the scrub to be run on hard
reboots and power-ons.
Change-Id: Icf27acf73240c06b58091f1229efc0f01cca3f85
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/905
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
As cmos.layout parsing capabilities are already there in nvramtool,
use those than using build_opt_tbl.c. Add binary and header file
generation in nvramtool. Make appropriate changes to Makefile.inc.
Change-Id: Iaf3f5d4f51451aeb33c92800a0c895045f2388cf
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/898
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
This change reverts :
Change Id I4fdb281b2b684ab5fea999aae28ca08dce24da4d
The wbinvd (or invd) should not be needed at the reset vector. It
causes problems with some CPUs AP init. If there is a problem with
a specific CPU and it must be done at this location, it should be
added conditionally.
Change-Id: I85b71b0a07f039359a4fb889aaa05c75fff619be
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/908
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Drop comments (from e7501 era) which no longer seem to apply with
e7505. Write the semi-constant D0:F0 table as code. Some register
settings seem to be in different order compared with vendor BIOS,
and will be handled by follow-up patches.
Split RCOMP register copy function in two parts.
Drop some uses of inline and local_mdelay().
Change-Id: I8739d3b2bbad5861118e8b16ccea1dd86991204f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/896
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Hope no more blank issue is got from future copy-paste.
Change-Id: I5eb50e8232e339e7039a15054606aaff6b7ebc52
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/907
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
S3.rom is useless for all the other boards which don't use flash to
save sleep/wakeup settings. AGESA-based boards other than persimmon
haven't been validated the S3 resume. They don't need S3.rom yet.
Change-Id: I12693e9556ca6f8e0d80b2ab2dca5c85bdb97685
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/902
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The name of processor created by AGESA is P00n, whose P is
BLDCFG_PROCESSOR_SCOPE_NAME(is 'C' if it is undefined.) and n starts
from 0. The dsdt should be aligned with that.
This feature has only been tested on persimmon. The changes on all the
other boards were propagated.
Change-Id: I8c3fa4b94406d530d2bed8e9a1f42b433bbec3ec
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/884
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
During normal boot, the cbmem is uninitialized. So it is illegal to find
the heap in cbmem.
Change-Id: I8b5e1dbf1124819ed91693a86a6dbe41aea109e5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/904
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
Don't test executable files nor object files, even if the former might
render the test useless on win32 (executable bit isn't well defined there).
Change-Id: Ifb6fc83243289d266f439316c14b6b009f8da5fc
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/890
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Makes the code a bit more readable, IMO. There is no clean way
to implement this as the affected registers are undocumented.
Seems ROMCC cannot handle the enum. Also any of my future changes
would not be even abuild tested as there is no longer a board with
ROMCC and this chipset. E7505 chipset is CAR only from now on.
Change-Id: I0e2d8ba0c7ed7cce46d9eafb8d8badf04cf75f7a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/895
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
- Add documentation for COMPILER_GCC, and COMPILER_LLVM_CLANG.
- SCANBUILD_ENABLE, CCACHE: Amend documentation.
- SCANBUILD_REPORT_LOCATION: Document default dir, names of scan-build dirs.
- INCLUDE_CONFIG_FILE: Add more verbose docs, show how to use it.
- Fix typos/cosmetics/indentation, improve wording on some items.
Change-Id: I6b67b2c777868e4421405caaffe6631e69dddad2
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://review.coreboot.org/893
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Persimmon is the demo board. Tested by Linux and Windows 7.
Change-Id: I5ded942b51e63ebeb08ace0b202b4ed239b0c14c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/624
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
1. Move the Stack to high memory.
2. Restore the MTRR before Coreboot jump to the wakeup vector.
Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/623
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marcj303@gmail.com>
HEST feature starts from ACPI 4.0.
HEST is one of four kinds of tables of ACPI Platform Error
Interfaces (APEI). In Windows world, APEI is called Windows Hardware
Error Architecture (WHEA).
APEI consists of four separate tables:
1. Error Record Serialization Table (ERST)
2. BOOT Error Record Table (BERT)
3. Hardware Error Source Table (HEST)
4. Error Injection Table (EINJ)
All these 4 tables have the same header as FADT, MADT, etc. They are
pointed by RSDP.
For the HEST, it contains the error source. The types of them are
defined as
type description
1. Machine Check Exception (MCE)
2. Corrected Machine Check (CMC)
3. NMI Error
6. PCI Express Root Port AER
7. PCI Express Device AER
8. PCI Express Bridge AER
9. Generic Hardware Error Source
Error source types 3, 4, and 5 are reserved for legacy reasons and
must not be used.
Currently AMD board only provide part of "Machine Check
Exception (MCE)" & Corrected Machine Check (CMC)". we need to provide
the header of each error source. Other types of Error Sources is in
TODO list.
Only persimmon is tested. Linux can add HEST feature. The dmesg says,
ACPI: HEST 0000000066fe5010 00198 (v03 CORE COREBOOT 00000000 CORE 00000000)
......
HEST: Table parsing has been initialized.
No more message is got.
Windows can boot with this patch. Havent found a way to test it.
Change-Id: I447e7f57b8e8f0433a145a43d0710910afabf00f
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/888
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: build bot (Jenkins)
This binary is required for anyone who wishes to build a
sandybridge mainboard.
Change-Id: I779ef5e2b77166b81cb05eada37291368e74fbb6
Signed-off-by: Ron Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/897
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
"This file must be in UNIX format" is not valid anymore.
Change-Id: I86169b12e7db159c1d3f380b0434874e9b6f5274
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/899
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
While at it, also make the array static - no need to export this symbol.
Change-Id: I7fdcda2b80150b6f32b5bc3e0957998a4fd43fce
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Reviewed-on: http://review.coreboot.org/892
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
Tested on real hardware, mainboard with dual Xeon P4 HT CPUs
requires cache-as-ram init code with AP SIPI protocol.
Also enable 2nd CPU and PATA and clean-up Kconfig and ACPI.
Change-Id: I415482f3af22df79d82492c49aed83549f29aa56
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/886
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a memalign function and have malloc use it. Also,
change the default alignment for malloc to u64-aligned.
Change-Id: I0788637008f5cb5ac801d8bbdc430ca992c98e81
Signed-off-by: Ron Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/887
Tested-by: build bot (Jenkins)
Reviewed-by: Mathias Krause <minipli@googlemail.com>
Change the ExecuteFinalHltInstruction to assembly code. so we can make
sure the code can run stackless.
Change-Id: I783ced6cf7c5bc29c12a37aef29077e610d8957d
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: zbao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some places still hardcoded the address instead of using IO_APIC_ADDR.
Change-Id: I3941c1ff62972ce56a5bc466eab7134f901773d3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/677
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Fix delay loop comments. Time waited and the comments did not match
in the origin (e7501), so delays currently "just work".
Move reset detection to main raminit and don't use generic
sdram_initialize for now, as there are local debug
functions I need to use. Fix AOpen respectively.
Disable ecc scrub, until I have it fixed for cache-as-ram use.
Change-Id: I0529297f43c565d30b5fb7d1836700278ac029c4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/883
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Drop maybe-prefix in registers and tables.
Have a name in place of PCI_DEV(x,y,z) to avoid confusion.
Change-Id: I88f51b50d7fd83294aa14455a83418630e1bab85
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/882
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the early days of v2 the (e.g.) #ifdef SMP style was frowned upon in
some quarters.
Hence, empty definitions of functions were created. This
particular function, possibly the last remaining example,
was no longer even being used anywhere.
Signed-off-by: Ron Minnich <rminnich@gmail.com>
Fixed "warning: format not a string literal and no format arguments"
Change-Id: If752a37f268c90f782c6e831e5477ea804e48026
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Reviewed-on: http://review.coreboot.org/878
Tested-by: build bot (Jenkins)
Reviewed-by: Bernhard Urban <lewurm@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's almost 10 years old. It never worked. It's a soldered in FLASH,
so mistakes are fatal. It's got no redeeming features.
Remove the dell directory. In 12 years of trying to work with Dell
we have not had much interest. It's misleading to have it there.
Change-Id: I83ff009bd7a6d5289229ca39608789ae5c33710b
Reviewed-on: http://review.coreboot.org/876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
early_serial and some ACPI needed for compilation
Change-Id: I5dd970676488697156e0630392884f31149ac85b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: http://review.coreboot.org/824
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This includes only early serial support for now.
Change-Id: I9a2a439e1d17a989428033fdb4a4b813553dab6d
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/823
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
- preprocessor macros should not use defined(CONFIG_*) but
just CONFIG_*
- drop AMD CPU model 14XXX config variable use. Those do not exist.
- skip some delays on Sandybridge systems
- Count how long we're waiting for each AP to stop
- Skip speedstep specific CPU entries
Change-Id: I13db384ba4e28acbe7f0f8c9cd169954b39f167d
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: http://review.coreboot.org/871
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Fix regression after commit:
7dfe32c540
Only align 16-bit entry on platforms that really require it,
indicated by selecting SIPI_VECTOR_IN_ROM in CPU Kconfig.
Disable assertion test of AP_SIPI_VECTOR for platforms not
depending on this feature.
Build of romstage should be fixed to get the vector address from
bootblock build automatically.
Change-Id: Ide470833c0254df1a9ff708369ab1c095ccfb98d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/875
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously this part of smmrelocate.S had to be omitted because
the CONFIG_ options for those components did not exist yet. Add
them back.
Change-Id: I6ac94ca804e03062724401a08d1d174adac5e830
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/874
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Also fix the MTRR check to use the total_mtrrs
variable instead of a hardcoded 8.
Change-Id: I2c5ceb3910cd949f43ecf5b8aff857d6ffe0b1a5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: http://review.coreboot.org/873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This function can be used outside of the normal CPU setup
Change-Id: I810c63b8aff868a6f69d5b992bea1cfae5a5996b
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/868
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
cache as ram does not usually cache the ram before it is up. Hence,
if romstage.c backs up resume memory, the involved memcpy is always
uncached. This makes resume very slow.
On Sandybridge we copy the memory later, after enabling caching, and
that allows us to resume in as little as 250ms.
Change-Id: I31a71ad4468679d39880cf9a8c4e497bb7addf8f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/872
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Some CPUs (Sandybridge) seem to require this, and it does not hurt
on other CPUs.
Change-Id: I4fdb281b2b684ab5fea999aae28ca08dce24da4d
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/869
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
In ChromeOS we potentially have different payloads with
different versions. Since the user land tools get information
on which one of them is loaded, leave the string in smbios
empty so we can fill it out in the payload.
Also fill out system version number and serial number with
some constant values.
Change-Id: Id1fed5a54b511c730975fa83347452f1274b8504
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/867
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Kyösti Mälkki