Enable CPPC entries generation, needed for Intel SpeedShift.
This can be tested by checking sysfs in Linux:
$ grep . /sys/devices/system/cpu/cpu?/acpi_cppc/*perf
The output should look like this, while the values may differ:
/sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf:28
/sys/devices/system/cpu/cpu0/acpi_cppc/lowest_nonlinear_perf:5
/sys/devices/system/cpu/cpu0/acpi_cppc/lowest_perf:1
/sys/devices/system/cpu/cpu0/acpi_cppc/nominal_perf:24
/sys/devices/system/cpu/cpu1/acpi_cppc/highest_perf:28
/sys/devices/system/cpu/cpu1/acpi_cppc/lowest_nonlinear_perf:5
...
Change-Id: I910b4e17d4044f1bf1ecfa0643ac62fc7a8cb51b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
FSP reserved memory is allocated inside cbmem which already gets
marked as a reserved memory region, so there is no need to do this
explicitly.
Change-Id: I39ec70bd9404d7bc2a4228c4364e4cc86f95d7c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Now that CBFS verification is available as an optional feature in
menuconfig (CB:59982), we should add build test configs to ensure it
doesn't break without notice. One Arm and one x86 board should be good
enough for now.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I530dfd37472e63b80a67badd22a13d54d2c4621b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60467
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
In order to make SC7180 boards compatbile with some optional Kconfigs,
increase the bootblock size a bit and add room for a TCPA log buffer to
memlayout. The large pre-RAM CBFS cache wasn't really needed anymore
anyway since we switched QcLib to use LZ4 compression.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I7321cca9d7b79368115c57f156b8e71657802a41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Add GPIO configuration for target specific i2s ports.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board
Boot on herobrine board (no speakers to test yet)
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Change-Id: I2ce95332f892d5d4acb2755307df84d37feb8002
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Initialize EC and H1/TPM instances on herobrine devices.
BUG=b:182963902
BRANCH=None
TEST=Validated on qualcomm sc7280 development board
and verified booting on herobrine.
Change-Id: I8cbdd1d59a0166688d52d61646db1b6764879a7c
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add OVTI8856 information for vell:
BUG=b:210801553
TEST=Build and boot on vell
Change-Id: I43de859cd0cdd9fe21c16cabfad511ed0b368ee3
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
According to the latest schematic for the next build phase, exchange I2C port for TPM/touchscreen.
TPM: I2C3 -> I2C1
Touchscreen: I2C1 -> I2C3
BUG=b:210572663
TEST=FW_NAME=vell emerge-brya coreboot
Change-Id: If72717a2c073f5b871c3109399f466a04a9d2484
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The PMC IPC method that is used for RTD3 support expects to be provided
the virtual wire index instead of the LCAP PN for CPU PCIe RPs.
Therefore, use the prior patches to update pcie_rp for CPU RPs.
Note that an unused argument to pcie_rtd3_acpi_method_status() was also
dropped.
BUG=b:197983574
TEST=add rtd3 node under pcie4_0 in overridetree for brya0, boot and
inspect the SSDT to see the PMC IPC parameters are as expected for the
CPU RP, and the ModPhy power gating code is not found in the AML for the
PEG port.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: Tim Crawford <tcrawford@system76.com>
Change-Id: I84a1affb32cb53e686dbe825d3c3a424715df873
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60183
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Alder Lake chip.h file has pcie_rp_config entries for the CPU PCIe
ports, but the UPDs are not set. This patch hooks up those config
structs to the appropriate FSP-S UPDs.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ibb2375e66d53b4b7567dbe88b941cd720fdad927
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
When using a mixed memory topology with DDR4, it's not possible to boot
when no DIMMs are installed, even though memory-down is available. This
happens because the DIMM SPD length defaults to 256 when no DIMM SPD is
available. Relax the length check when no DIMMs are present to overcome
this problem.
Tested on system76/lemp10. Unit boots with and without DIMM installed.
Change-Id: I1cabf64fade1c06a44b6c3892659d54febc7a79a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
We need to protect debugsys for firmware image without serial console.
Original settings for protecting debugsys is wrong which will cause some
hardware modules to fail to set their registers correctly.
We move the setting from MM_AO_APC to INFRA_AO_APC because the setting
of debugsys is defined in INFRA_AO_APC and set the debugsys index to
correct value of 94.
BUG=b:213125558
TEST=all modules work normally using image without serial console.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: Ibce626386ac1f8de42f8717c4ad9ba403640b3ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60833
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DFD (Design for Debug) is a debugging tool, which scans flip-flops
and dumps to internal RAM on the WDT reset. After system reboots,
those values can be shown for debugging using MTK internal parsing
tools.
BUG=b:202871018
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I7b711755022b5d9767019611151fea65e71edc66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60828
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Kingler board has an SD card reader connected via USB and can be
enabled by setting GPIO EN_PP3300_SDBRDG_X to output mode and activated.
BUG=b:211385131
TEST=boot kernel using SD card.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I903731ea4906328b2f0f5a7c6c06bd9c964d24ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60780
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The variable `custom_count` is the number of custom fields, so only
holds non-negative values, so change the struct member type from int to
size_t.
Change-Id: Ic35aafefc870092298523ba2e10adf4fcb687a01
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60790
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Building an image for OCP DeltaLake with `x86_64-linux-gnu-gcc-11` fails
with the format warning below as the size of char * differs between
32-bit and 64-bit.
CC ramstage/drivers/ipmi/ipmi_fru.o
src/drivers/ipmi/ipmi_fru.c: In function 'read_fru_chassis_info_area':
src/drivers/ipmi/ipmi_fru.c:192:57: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'unsigned int' [-Werror=format=]
192 | printk(BIOS_ERR, "%s failed to malloc %ld bytes for "
| ~~^
| |
| long int
| %d
193 | "chassis custom data array.\n", __func__,
194 | info->custom_count * sizeof(char *));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
src/drivers/ipmi/ipmi_fru.c: In function 'read_fru_board_info_area':
src/drivers/ipmi/ipmi_fru.c:291:57: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'unsigned int' [-Werror=format=]
291 | printk(BIOS_ERR, "%s failed to malloc %ld bytes for "
| ~~^
| |
| long int
| %d
292 | "board custom data array.\n", __func__,
293 | info->custom_count * sizeof(char *));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
src/drivers/ipmi/ipmi_fru.c: In function 'read_fru_product_info_area':
src/drivers/ipmi/ipmi_fru.c:398:57: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'unsigned int' [-Werror=format=]
398 | printk(BIOS_ERR, "%s failed to malloc %ld bytes for "
| ~~^
| |
| long int
| %d
399 | "product custom data array.\n", __func__,
400 | info->custom_count * sizeof(char *));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
Fix the mismatches in `read_fru_chassis_info_area()` by using the length
modifier `z` for size_t as that is what `size_of` yields to.
Change-Id: If0c4266b19d56fa88abc397f305154d473ae1a93
Found-by: gcc (Debian 11.2.0-10) 11.2.0
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In some cases, partner may assign same clkreq on more than one devices.
This could happen when one device is in baseboard dev tree and another
one is in override dev tree.
This change adds a clkreq overlap check and shows a warning message
TEST=On brya, assigned one clkreq to 2 devices and found the warning
message
Change-Id: I2f701a19118f4702c227b17e43b6551591d9b344
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
End all CMOS variable with a C and EC variables with an E.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie0fab6b9dcd805f7b8c9bf8f14b0a799d8f396c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Define the register offsets and bits in a separate header file instead
of in the middle of the .c file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I814192b2dfeff05877ac857dd89e8cdc7ae5ee25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
In espi_wait_channel_ready the return value of espi_get_configuration
didn't get checked before. In the case of the espi_send_command call in
espi_get_configuration returning CB_ERR, espi_get_configuration didn't
write to the local config variable, so if this happens in the first pass
of the do-while loop, the following espi_slave_is_channel_ready call
would use the uninitialized local config variable as parameter. Fix this
by checking the return value of espi_get_configuration.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iff1a0670e17b9d6c6f4daf2ea56badf6c428b8c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The latest schematics changes the TPM I2C from I2C3 to I2C1. This patch
moves the TPM I2C setting from the board layer to the baseboard and
fixes the TPM I2C bus assignment.
BUG=b:211886429
TEST=build pass
Change-Id: I70d5a8fde1866c5dd4587ab5af2d41724c60ee0c
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60439
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The board id assignment CL (CB:56642) landed after
BOARD_GOOGLE_HEROBRINE has been deprecated to
BOARD_GOOGLE_HEROBRINE_REV0 (CB:60284). Fix it to accomodate for the
GOOGLE_HEROBRINE_REV0 board updates.
BUG=b:211644878
BRANCH=None
TEST=built all variants of herobrine to make sure it compiles.
For reference:
=============
CB:56642:
commit 8b63dac061
Author: Ravi Kumar Bokka <rbokka@codeaurora.org>
Date: Tue Jul 27 19:29:18 2021 +0530
google/herobrine: configure gpio to detect board ID
=============
CB:60284:
commit 8bdbe23a93
Author: Shelley Chen <shchen@google.com>
Date: Tue Dec 21 13:17:33 2021 -0800
mb/google/herobrine: Transition BOARD_HEROBRINE to BOARD_HEROBRINE_REV0
=============
Change-Id: I6dab994e65eadff303eb88a63b8dd81e19694678
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Similar to commit 0167f5adb (mb/google/redrix: Add _HID for privacy
screen device), add the same _HID to the privacy screen device.
Change-Id: I58ad538dfaf602e3f4afb98d1a25d52753a15d93
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Add minimal Device entries with just an _ADR for each of the PEG ports
for P and M chipsets (N does not have any PEG ports).
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id1009004969729eddf7005fa190f5e1ca2d7b468
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The PMC IPC method used to enable/disable PCIe srcclks uses the
LCAP PN field to distinguish PCH RPs. For CPU RPs, the PMC IPC
command expects the RP number to be its "virtual wire index"
instead. This new function returns this virtual wire index
for each of the CPU PCIe RPs.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I5e9710f0d210396f9306b948d9dce8b847300147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The PMC IPC method used to enable/disable PCIe clk sources uses the
LCAP PN field to distinguish PCH RPs. For CPU RPs, the PMC IPC
command expects the RP number to be its "virtual wire index"
instead. This new function returns this virtual wire index
for each of the CPU PCIe RPs.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7aa14a634dcd90c4817009db970fb209ae02c63d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Due to the CL was merged: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3354766.
Update to matched id for audio work normal.
1019 id changed to 10EC1019:0/10EC1019:1 from 10EC1019:1/10EC1019:2.
BUG=b:210542422
TEST=emerge-guybrush coreboot chromeos-bootimage; Download image 14425 and tested audio function.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I542f886fe63205777837d7146169177b043cc5f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Create the agah variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:210970640
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_AGAH
Change-Id: I6adcf4e8010969cf185513d68bb1b76ea08194c7
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Don't perform GPP lock configuration if
SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS config is not selected.
This patch fixes a compilation issue when APL/GLK boards are
failing while gpio_lock_pads() function is getting called from
IA common gpio block.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I392dc2007dba8169e480f82b58b7f0a1578bb09f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch modifies struct pad_config.pad type from `int` to 'gpio_t'
as pad offset inside GPIO community is unsigned type and also to
maintain parity with `struct gpio_lock_config.pad` type.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I15da8a1aff2d81805ba6584f5cc7e569faf456e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
This patch renames struct gpio_lock_config variable `gpio` to `pad`,
to represent the pad offset within the GPIO community.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6bed99c401435c96c9543f99406a934d7141c575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
This patch fixes the documentation discrepancy of GPIO reset type
between PCH EDS and GPIO BWG. As per GPIO BWG, there are four GPIO
reset types in Alder Lake as below:
- Power Good - (Value 00)
- Deep - (Value 01)
- Host Reset/PLTRST - (Value 10)
- RSMRST for GPD/Reserved for GPP - (Value 11)
Hence, created two different reset types for `GPP` and `GPD`.
Also, replaced PAD_CFG0_LOGICAL_RESET_x macros with PAD_RESET().
BUG=b:213293047
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4b8742c7a0cc1dc420e3e22e34a16355294ed61b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The current CBFS mcache size (roughly 7KiB) is insufficient for mt8186,
so we need to increase it by 1KiB (and decrease the stack by 1KiB).
Error logs:
CBFS ERROR: mcache overflow, should increase CBFS_MCACHE size!
CBFS: mcache @0x0010e004 built for 63 files, used 0xde4 of 0xdfc bytes
BUG=b:202871018
TEST=no cbfs error logs.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1e627ede3774665575006f752f89101e3c5bde9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60529
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According schematics, we configure audio by turning on setting of
audio power and selecting I2S pin-mux.
Schematics references:
kingler: schematic_kingler_proto0_gerber_20211115.pdf
krabby: crab_proto 0_20211112_final.pdf
BUG=b:204164695
TEST=Verified by CLI command(badusbbeep/devbeep) on kingler and krabby
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Change-Id: Ia6374d0e5535b7cff4df8759312786fef8b94b6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Since fw config fields for DB_SD can share the same driver, we will
remove the duplicate fields DB_SD_GL9750 and DB_SD_RTS5232S.
BUG=b:212240358
TEST=emerge-brya coreboot and can boot to OS.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: If7814c35f63fd6fa27195d448c4d51fc980aaa9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The VBT is extracted from Chromium OS in developer mode with the device
running firwmare .
$ sudo dmesg | grep ' DMI:'
[ 0.000000] DMI: Dell Inc. Sarien/Sarien, BIOS Google_Sarien.12200.99.0 07/29/2020
$ sudo cbmem -1
coreboot-v1.9308_26_0.0.22-8761-gdba94f429a Wed Jul 29 16:09:30 UTC 2020 bootblock starting (log level: 8)...
[…]
coreboot-v1.9308_26_0.0.22-8761-gdba94f429a Wed Jul 29 16:09:30 UTC 2020 ramstage starting (log level: 8)...
[…]
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 614c0 size 4a0
Found a VBT of 4608 bytes after decompression
[…]
$ sudo cp /sys/kernel/debug/dri/0/i915_vbt vbt.bin
Using the Chrome OS recovery image, Matt DeVillier verified, that the
Sarien VBT is identical to Arcada, so add the VBT for all variants.
Change-Id: Ibab8a7b0b3f721ca434ac38b51528b81e66f3bb7
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Elyes HAOUAS