TSN runs in SGMII mode on this mainboard. This requires setting the link
speed to 1 Gbps.
Change-Id: I9f1da971b4de5671d6d38be6dbc50edbbe20d157
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This mainboard uses all three internal Ethernet GbE-TSN controllers. Two
of them are initialized by the Programmable Services Engine (PSE).
This patch enables the Serial Gigabit Media Independent Interface
(SGMII) mode for GbE PSE0 and GbE PSE1. By setting PCH PSE DMA pins to
host owned, the IO is under control of the IA processor cores through
system software.
TEST:
- Boot mc_ehl2 into Linux and check inet addr via 'ip a'
Change-Id: I74e660548b2c44d5dbdb6023d5a36cfdd7e96f43
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
To be able to make EHL Ethernet GbE-TSN Controller configurable, a
driver is required. Functionality comes in following patches.
Change-Id: I7522914c56b74486bb088280d2686acf7027d1d3
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Both option-HDMI and option-DP use the same setting of vbt,
and ABSENT is just physically remove option board from motherboard,
so it just need one vbt, and it don't need the fw_config to decide
which vbt will be return.
BUG=b:231769131
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1f8cdcbc05ed3bc689d29261e4fd4d700326dce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Both option-HDMI and option-DP use the same setting of vbt,
and ABSENT is physically remove option board from motherboard,
so set default vbt has option-DP setting and only return it.
BUG=b:231769131
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I440143dabcf04c103f2a4420a7e4afb8ec12ec1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
New device id 0x51f1 is added.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I695309d529a117bad68fc89a7f136e69cecb95d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
CPUID_RAPTORLAKE_P_J0 is ES. Add it to generate is_es = 1 in ACPI
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib8d57f7fb0b3d15bc4bcdeae47bfbdde17e13118
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Based on the public datasheet of NCT6686 which should be similar to
NCT6687D.
TEST=Enable serial for debugging on MSI PRO Z690-A WIFI DDR4 and see
coreboot console on the debug port
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0e8744b5958af196de3de63de31852029d81436e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Starting with Meteor Lake SoC, the PCR/DMI interface to program GPMR
is replaced with IOC (I/O Cache), hence, this patch implements IOC
driver to support that migration.
Reference: 643504 MTL FAS section 7.5.2
TEST=Build and boot to OS for TGL RVP and MTL PSS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I768027c2ca78310c03845f70f17df19dc8cd0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63198
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The MP_IRQ flags can be used in the MP table and the ACPI MADT table.
Move them into acpi.h to avoid pulling in the full mpspec.h which is
only available on x86.
BUG=b:218874489, b:160595155
TEST=Build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f1091b7629a6446fa399720b0270556a926401a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63845
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The fast SPI controller (usually handling the boot NOR flash) is a
different controller type than the generic SPI controllers as it
provides access to the boot flash and usually is not used for generic
SPI slave connections.
Though there is common code for the fast SPI controller it currently do
not uses the PCI driver structure. This patch adds the PCI driver
envelope to the fast SPI driver and moves Apollo Lake as the first
platform to this driver.
Change-Id: I31bf39ec1c622db887dec9ca8623a7f282402849
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add Platform Secure Boot (PSB) enablement via the PSP if it is not
already enabled. Upon receiving psb command, PSP will program PSB fuses
as long as BIOS signing key token is valid.
Refer AMD PSB user guide doc# 56654, Revision# 1.00, this document is
only available with NDA customers.
Change-Id: I30aac29a22a5800d5995a78c50fdecd660a3d4eb
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Use the existing definitions from FspUsb.h instead of magic values for
the ComboPhyStaticConfig settings in the mainboard's devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2707d017909b7516e5d8711c8f4e2914165ed10d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The postcar frame can now be a local variable to that function.
Change-Id: I873298970fff76b9ee1cae7da156613eb557ffbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Some functions are only called locally.
Change-Id: I96a4e40a225536f62abb2a15c55d333b8604e8cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This removes some of the postcar setup boilerplate.
Change-Id: I4f8f92b88ac16dd70ff4878dfc14e676386d4703
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Setting up postcar MTRRs is done when invd is already called so there
is no reason to do this in assembly anymore.
This also drops the custom code for Quark to set up MTRRs.
TESTED on foxconn/g41m and hermes/prodrive that MTRR are properly set
in postcar & ramstage.
Change-Id: I5ec10e84118197a04de0a5194336ef8bb049bba4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54299
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The commentary was wrong, write_protect_state() is only called
in ramstage at the moment, and only if MRC_SETTINGS_PROTECT is
selected.
Implementation of get_gpio() eventually does the MMIO read, so
BOARD_GOOGLE_CYAN was not a special case.
Change-Id: I96ca871110bcf2fc1485bd042ed137d51b822a20
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
GNVS is more fragile as you need to keep struct elements in sync with
ASL code.
Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
For some reason, the '\s' syntax is causing an error for me under
freebsd. It's entirely possible that I'm doing something wrong, but
this change should be fine regardless.
Freebsd's grep, GNU grep, and git grep all handle posix regex classes,
so this change should be transparent.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I489ec13b4ea2e9c17692888e42b8741763b1a2c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The "No memory dimm at address" line in get_spd_sn and get_spd fucntion
have different format of SPD address.
get_spd_sn shows a 8-bit address format but get_spd shows a 7-bit
address format when there is no DIMM connected. It can be confusing
when debugging.
Change-Id: I46a006f4024b12d27ae0a933b7c40515034d5d64
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There were 3 different functions in gpio.c file which used to
get gpio group and pin information separately through function
calls.
Since these are static function, we can modify argument to
pass group and pin information from parent/calling function.
This will reduce redundant work of getting information 3 times
separately.
BUG=None
BRANCH=None
TEST=code compiles and correct information is passed to functions.
Check by using pin information on Brya.
Change-Id: Ie92be8c22838ebc5e831be58545e2023eecfff24
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Nivviks uses CNVi WLAN, so disable the PCIe-related GPIOs.
BUG=b:218929856
TEST=Boot to OS on nivviks and check that WLAN still works.
Change-Id: I68f12490b0f09658e1307828b0e4488504f50e61
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable either eMMC, NVMe or UFS based on fw_config. NVMe and UFS are
only supported on nirwen, an additional nissa variant based on nivviks
and sharing the nivviks coreboot target.
BUG=b:218929856
TEST=Boot to OS on nivviks to check that eMMC still works. NVMe and UFS
will be tested once nirwen boards are available.
Change-Id: Ibdb122ef35920c962d7bd9f3f238a5d548112282
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Nirwen is an additional nissa reference board which is almost identical
to nivviks, so is reusing the nivviks coreboot variant. However, there
are two GPIO changes, so update the GPIO tables to handle these based on
board_id.
nivviks:
GPP_D6 -> WWAN_EN
GPP_E13 -> NC
nirwen:
GPP_D6 -> SSD_CLKREQ_ODL
GPP_E13 -> WWAN_EN
BUG=b:218929856
TEST=Boot to OS on nivviks
Change-Id: I494ed127714069a8f36d16d11ca4e8a1f3d37827
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
BUG=b:218929856
TEST=Boot to OS on nivviks. Set fw_config in CBI and check that pen
garage is enabled/disabled as expected.
Change-Id: I2c3f5403e0f11443ad3647b8c4ae624f0b88a111
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
BUG=b:218929856
TEST=Boot to OS on nivviks. Change fw_config in CBI and check that WFC
is enabled/disabled as expected.
Change-Id: Iac4bb358d904579376e0810f8c2644b3bde4f1e6
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Crota.
BUG=b:231686917
TEST=USE="project_crota emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ie10167e48256a61801b2623ae4500db5e67e73cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
If a payload did any NULL dereferencing it would be broken and jump
back to coreboot code. This fixes the SeaBIOS, FILO and possibly other
payloads too.
Fixes: 3f01cd1453 ("arch/x86: Add support for catching null
dereferences through debug regs")
TESTED on qemu/i440fx.
Change-Id: I80f69b71f4d0fab3126e4b9f8c8dc7737b372174
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64345
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Stefan Ott <coreboot@desire.ch>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since coreboot locks GPIO registers after GPIO configuration, OS is not
able to program GPE_EN register to program wake events. This causes
the issue of event not getting logged into event log (since GPE_EN bit
is not set).
GPE_EN register programming is required for the GPIO pins which are
capable of generating SCI for the system wake. Elog mechanism relies
on GPE_EN and GPE_STS bit to log correct wake signal.
This patch add supports to program GPE_EN register before coreboot locks
the GPIO registers. Note that coreboot will only program GPE_EN bits for
GPIO capable of generating SCI.
This will help resolve issue where we don't see wake event GPIO in event
log.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Compile code for Brya and see GPE_EN bits set from the kernel console
Change-Id: I27e525f50c374c2cc9675e77eaa7774683a6e7c2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
coreboot needs to set GPE_EN bit for the GPIOs which are wake capable
from s0ix/sleep. Due to GPIO locking mechanism, coreboot/OS will not
be able to write GPE_EN register post GPIO has been locked.
This patch adds support in SoC code to provide correct offset for
GPE_EN and GPE_STS registers to the common code.
Plan is to use this offsets to set GPE_EN bits before GPIO locking
in coreboot which will be part of subsequent CL.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Check if code compiles for Brya and correct offset values are printed.
Change-Id: I6b813b30b8b360f8eccbf539b57387310e380560
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change ELAN touchscreen i2c address to 0x16 and change HID to ELAN900C
BUG=b:231684121
TEST=local build and tested with ELAN touch screen
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ide005a0681e236c3102090c1c36ab81926849000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
BUG=b:218929856
TEST=Boot to OS on nivviks. Change fw_config in CBI and check that SD
card is enabled/disabled as expected.
Change-Id: Idcf38343bb290b1eff6a2e440f868b03acba3288
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Ti50 firmware versions below 0.0.15 don't support the firmware_version
register and trying to access it causes I2C errors. Some nissa boards
are still using Ti50 0.0.12, so add a workaround Kconfig to skip reading
the firmware version and select it for nissa. The firmware version is
only read to print it to the console, so it's fine to skip this. This
workaround will be removed once all ODM stocks are updated to 0.0.15 or
higher.
A similar workaround Kconfig was added in CB:63011 then removed in
CB:63158 which added support for separate handling of Cr50 and Ti50.
But we actually still need this workaround until all Ti50 stocks are
upgraded to 0.0.15 or higher.
BUG=b:224650720
TEST=Boot to OS on nereid with Ti50 0.0.14
Change-Id: Ia30d44ac231c42eba3ffb1cb1e6d83bb6593f926
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
With GPIO_DRIVER_LOCK kernel driver can't change to IRQ. Thus, we need
to set it as INT in coreboot to make the IRQ work.
BUG=b:223476974
TEST=evtest work as expected.
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 15 (SW_PEN_INSERTED) state 0
Properties:
Testing ... (interrupt to exit)
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: -------------- SYN_REPORT ------------
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I5f9fdfb2622b4b955da216119e74c6f7d5795d36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
By using mp_run_on_all_cpus_synchronously to run APs MTRR init, it
gurantees the BSP will run post_cpus_add_romcache until all APs finishes
_x86_setup_mtrrs task.
BUG=b:225766934
TEST=Test on redrix and found the MTRR race condition on AP/BSP is gone.
Change-Id: I1fd889f880a0c605e6c739423a434d2adbc12d26
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
MTRR is a core level register which means 2 threads in one core share
same MTRR. There is a race condition could happen that AP overrides
BSP MTRR unintentionally.
In order to prevent such race condition between BSP and APs, this
patch provides a function to let BSP assign tasks to all APs and wait
them to complete the assigned tasks.
BUG=b:225766934
Change-Id: I8d1d49bca410c821a3ad0347548afc42eb860594
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63566
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change matches what we already do for cezanne. It will allow the
GPIO controller to work correctly in windows.
BUG=b:175146875
TEST=Boot windows and verify GPIO controller binds correctly and touch
screen works. Also boot linux and verify touchpad still works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I998e286de18d3e3f8b2fe610d17aef94a6cf5477
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Specify the USB PHY settings in the devicetree instead of relying on the
FSP defaults. The USB PHY configuration for Chausie are taken from the
internal UEFI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cc38e6e26d53802773fe3c405415de15cca98a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With this patch, the ThinkLight on the ThinkPad T60 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Change-Id: I47f878533d36857d002d2e2605cc8bc7e1d960c9
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Mario Scheithauer