The actual level required to take the ethernet switch out of reset is
low, not high.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: If4004ac5c2dc837270d4cb840d96ce92021d231e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fa69d22de901cd0843948de0f95a66a2aa99353
Original-Change-Id: I81eeb73b85cf113709b6d4ac3aa7639a40fa6719
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217416
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The proto0.2 hardware connects gpio26 (sw reset) to the ethernet
switch reset pit. The output stays low (or high-z) after power up,
which holds the switch in reset. Deassert the signal at startup on
hardware rev 1 and later.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: I4c5a0cc499563a33aa7d29be7767d0ec5d93c20f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6788962172c6e29e193fa3e85ca79cb83a96e154
Original-Change-Id: I81b3dccb1d1d43c5c1e6dcb5400af8eed6dee870
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217087
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Figuring out board_id on storm requires reading tertiary gpios, which
takes time. Let's calculate it once and reuse it when necessary.
BUG=none
TEST=verified board ID reported as 0 and 1 on proto0 and proto0.2
respectively.
Change-Id: I69f6afa3de8a175a1d723e95902efd15607e68b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 080c839c1c0c1b5e389b2382144ef67535bb4ff1
Original-Change-Id: I4e237077d1d9a96daebba462cd00f3f40be14518
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217086
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The proto0 storm hardware has the TPM reset line wired to the SOC GPIO22
pin instead of the system reset. This causes all kind of TPM behavior
problems and requires frequent power cycles. Adding explicit TPM reset
makes all those problems go away.
BUG=chrome-os-partner:30705, chrome-os-partner:30829
TEST=tried resetting proto0 at different moments during boot up - the
TPM does not fail anymore.
Change-Id: Idfa16e6e868336f38861edeb75703fff3f35172c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5e07815c227089b7f266ba5329812bf309b87e6
Original-Change-Id: Ia877fcd9efaf3ba12c8fe8c2958bd81c4bf22799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211497
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Storm provides three real and two fake gpios. To keep things simple,
define them all as active low and provide appropriate values for the
fake ones.
BUG=chrome-os-partner:30705
TEST=with the appropriate depthcharge change booted proto0, observed
appropriate behavior following the dev switch setting
Change-Id: I248b90ee06d226a223b6fc0993f209acdd58c77d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d48d1dcc88df0c1bd4c50f14dd2e7cd1dd4fba5d
Original-Change-Id: Icb7fb55949fa97ead9d19f0da76392ee63bbb5b8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210922
Reviewed-on: http://review.coreboot.org/9117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There's no need to add DMA ranges for these boards as
that memory is allocated within dpethcharge now. Additionally,
the DRAM_DMA_* Kconfig options were removed resulting in 0
values.
BUG=None
TEST=Built rush and ryu.
BRANCH=None
Change-Id: I597437960e4fddbf6d26f0b15ddeefc4557adc8b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26b503d759b2bac902e58e928d7c625c1a6c575
Original-Change-Id: I52bb8f760a56226c75611f7981570a44d56f242e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219710
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Clean up functions to write to clk_enb and rst_dev registers and add
clock_disable and clock_set_reset functions to provide a complete API for
updating the registers.
BUG=chrome-os-partner:31821
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on ryu. Compiles
successfully on rush
Change-Id: Ib0b7e3fc322f18be396ecf3b02b2399d4ba33e9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1bb222adc22c7e26077dfb2ba6e4d41a4965d183
Original-Change-Id: Icb8081fe3d80174c920eaaecf5cbb0aa912d5b19
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219191
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Since PSCI dynamically determines which EL to transition
to based on SCR_EL3 there's no need to provide that
information.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel with MP.
Change-Id: Ia59bc8116ec4ae9bde2e6cad1861f76c14f7d495
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8bc5f7c8a114568ede98478c2fbea2f8b7d97f0c
Original-Change-Id: I8783b6315dca01464e14c9d2b20d009cf0beeb67
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218924
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PSCI functionality initially includes CPU_ON and CPU_OFF
functions. Upon entering secmon if the parameters are non-NULL
then a PSCI CPU_ON action is done for the current CPU.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted kernel with PSCI support. Brought up all CPUs in kernel
using PSCI. Turned CPUs on and off.
Change-Id: I256fa45a1c9889ff9d7990eb1898df1ec241c117
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 689ba03e313e7e52e9b74aa774897b55cbd52748
Original-Change-Id: I943826b7dbcc8e3f6c8c4b66344af8fac12ba94e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218923
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9097
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
If an exception is taken that the secmon won't return
to, there needs to be way to reset that cpu's state
w.r.t. stack usage. Therefore, provide secmon_trampoline
which will reinitialize the exception stack and SP_EL0
and start executing with SP_EL0 like the initial state
of the secmon entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also tested when PSCI
is employed in the kernel.
Change-Id: Ie9f5bbe715dcbcf8b67ea40f9a3a5088ac7aa2ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1f546ee3e9eca93baaa1ae0437351205bf548a5
Original-Change-Id: Ia3da75e1fa0251c8ea30eb0b0523c8a51c03b917
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218922
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9096
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Two things:
1. Not returning once setting the return state.
2. mempcy(x, y, ARRAY_SIZE(x)) is not memcpy(x, y, sizeof(x))
With these 2 changes arguments and results are being processed
correctly.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and brought up SMP using PSCI.
Change-Id: If76a207e1a434a4c08faaa535f069d7386481e9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d540afd4e6ea2b34cf3632ad2c683fcaa063c8
Original-Change-Id: I656b9c11e3bc07cc1664789a600eb88afd639f93
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218847
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9094
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Do the absolute minimum needed to allow the DPAUX mux ctl write
for I2C6. This leaves HOST1X off (reset and clock disabled) to
avoid a conflict with any kernel display driver init.
I2C6 init/enable will be moved to ramstage in the next CL.
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I42106778a26c5a1d1483cc308b8314599c391539
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a9ebfda31c620b24e5c765dc950b87e3e5587b
Original-Change-Id: I0760222f1d7ccee207ae9871aeed3e2ddbca3dca
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218900
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9093
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to process PSCI commands SMC instructions need to be
serviced. Provide a simple way for users of SMC to register their
handlers by function.
The SMC layer hooks into the exception processing, however it only
processes AARCH64 SMC calls. All others are ignored.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Added nop smc call to depthcharge. SMC handled and continue booting
to kernel.
Change-Id: I378f13c29220ff9f37040f094bf9cfb69259af0c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76d2febc50397348b68d38532b8f37e2b3cf6a30
Original-Change-Id: Ieaa29fa883b9f9d55fc62ba92a1d45452296efa4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218846
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9092
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The exception vectors were not reinitialized in secmon yet.
Add that as well as the split BSP vs non-BSP path. In doing
so bring in the cpu.c semantics for determining bsp at runtime.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also noted only one CPU
printing messages.
Change-Id: I26a7f9446f4422d2203b1d520e69f8dee9450b59
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67f79c61c902ee614f029047255b4be35112cd32
Original-Change-Id: Ide66f13c24f5798d5983c481ce616ae2800d558c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218845
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9091
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's helpful to differentiate the startup paths for
the BSP and the non-BSP. Therefore have c_entry
be an 2 element array of function pointers. The
non-BSP paths have an entry point one instruction after
stage/module entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: I40bb40462906f1b1eaf2db8584985095e8ac0bae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce10f954041b3fd581ad8a3d82dee567b68637fe
Original-Change-Id: Ia573b1095dca5f69e371bf1ddf6b6df72fa3b52e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218844
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9090
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The cpu.c contains some helpful construts as well as ramstage
devicetree handling. Split the 2 pieces so that cpu.c can be
reused in secmon.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted.
Change-Id: Iec0f8462411897a255f7aa289191ce6761e08bb0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4f30f1186950424b65df6858965a09ca51637e4f
Original-Change-Id: Ie87bd35bf1ccd777331250dcdaae07dab82d3d18
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218842
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9089
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to build upon the arm64 exception handlers need
to be registered. This provides very basic support to
register a handler for a specific exception vector.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel.
Change-Id: If046f0736765a2efeb23201c1d2d1f7f7db47dd2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a82e5e8d5900ebef16abdb68701be6beeb9ca13a
Original-Change-Id: I0f68a48101ff48d582f5422871b9e7e5164357e4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218650
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9088
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With the generic spin table support in place, use that.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=None
Change-Id: I7c9ebd16cd7d5e938e686df2225c612581382983
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb0d79f89e27fcd51cc751a94008b3801f5c6d0b
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Change-Id: Ic9949144ed1e9a952290d50b6726bf5891547896
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218657
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9087
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With the generic spin table support in place, use that.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Booted into kernel.
Change-Id: I8644f8a81b24bf4e00f8fac1d1018f9db77c952f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b1a4fe27070a80c8448051ec0565120901378673
Original-Change-Id: Id0832a4553101a366f011099e0744f6630d91924
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218656
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9086
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Support the generic spin table code instead of having
the one-off implementation.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel w/ smp. Both w/ and w/o secure monitor.
Change-Id: I8557298d1a159b70818cbd8864470ff0d8a46fb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8d89af95a7919f0b8acc92d82f3abda965514ccf
Original-Change-Id: I24d56a30fdabd7a35ebc28dcc355c675de823a51
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218655
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9085
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There was a hacky and one-off spin table support in tegra132.
Make this support generic for all arm64 chips.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Ran with and without secure monitor booting smp into the kernel.
Change-Id: I3425ab0c30983d4c74d0aa465dda38bb2c91c83b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 024dc3f3e5262433a56ed14934db837b5feb1748
Original-Change-Id: If12083a9afc3b2be663d36cfeed10f9b74bae3c8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218654
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9084
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's helpful to know if the current running CPU
is the BSP. Therefore, provide that semantic.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: I18cb8ab5149c3337e22b1f6046b1af266be7e47c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b390dc70b658c207cd3b64408713ec4cddab3172
Original-Change-Id: I3d5518d1f6d6a78b14f25bb7ef79727605064561
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218653
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9083
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide richer semantics for running code
on all CPUs add an all-but-self construct.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: If8dd28ff7f34d93592ab2025a65a2fd665e4e608
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a4622f63a065f620f0c92ef92eeb2aa5c2b441d
Original-Change-Id: Id18dc0423bcb0016ed36ace659b3f858e824c46c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218652
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9082
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Secure monitor runs at EL3 and is responsible for jumping to the payload at
specified EL and also to manage features like PSCI.
Adding basic implementation of secure monitor as a rmodule. Currently, it just
jumps to the the payload at current EL. Support for switching el and PSCI will
be added as separate patches.
CQ-DEPEND=CL:218300
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles succesfully and secure monitor loads and runs payload on ryu
Change-Id: If0f22299a9bad4e93311154e5546f5bae3f3395c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5e40a21115aeac1cc3c73922bdc3e42d4cdb7d34
Original-Change-Id: I86d5e93583afac141ff61475bd05c8c82d17d926
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/214371
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9080
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
stage_entry is the best place to enter for secmon, since it sets up all the
stacks right. The only need we need to take care is losing out on the parameter
passed to secmon. This patch adds an entry point for secmon rmodule and moves
the argument from x0 to x25, which is restored just before the jump to c_entry
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: I9638e9716b3bd5bff272e88fe9d965528d71e394
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffedb03208bafab6d5886db0259ec205dd20588f
Original-Change-Id: I74a7a609fbc08692d68708abe132cd219c89b456
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217570
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9079
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide SCR_EL3 initialization on all CPUs. This settings were
chosen in such a way that nothing would need to be done if EL3
is abandoned after transitioning to EL2 or EL1. If persistent
EL3 program is used those SCR policies can be updated within
that program.
BUG=chrome-os-partner:31634
BRANCH=None
TEST=Built and booted through kernel. Printed out SCR setting for
each CPU.
Change-Id: Ib44acd8ae40dbca590740340632f5b72998e9dd8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f77b903afbafad7d439ec50fc48f1eaa37827d90
Original-Change-Id: Id659f0a98360fe8bbc80e5a623eba1526e81b400
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218300
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9078
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As the arm64 boot flow handles initializing the GIC by
way of the driver provide the SoC support for that
driver and use it.
BUG=chrome-os-partner:31945
BRANCH=None
TEST=Built and booted kernel on ryu.
Change-Id: I6ba20339be8fc823e241b4299ad6c3deb82799fa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 582cd9cef58e27aef2ce9c9b4fba4a78365bec6e
Original-Change-Id: I34efaf28369377f353b4c51d20d19c9433befda4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217514
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9077
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
For every CPU that comes online initialize the GIC for
that CPU. This allows the per-cpu register state to
be initialized for every CPU that comes online.
BUG=chrome-os-partner:31945
BRANCH=None
TEST=Built and booted to kernel on ryu.
Change-Id: I467ca38d51ac67ffc19b1b4fc6fafa9394a876c9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b2faf33fad80fd7ecb884d3ad40917f5a629a5b2
Original-Change-Id: I58d0ffcfe65cffc6a4dd2678c041219e1e698aaf
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217513
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9076
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
The GIC is ARM's "Generic Interrupt Controller". This
change essentially implements the rudimentary support
for a GICv2 implementation that routes all interrupts
to Group1. This should also work for GICv1 with security
extensions.
BUG=chrome-os-partner:31945
BRANCH=None
TEST=Built and booted kernel using the code.
Change-Id: I9c9202c1309ca9e711e00d742085a6728552c54b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d1cd9b6b76035af107b7dc876f90777698162d34
Original-Change-Id: I4c5b84bfe888ac33fa01c8d64a3dffe1b5ddc823
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217512
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9075
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Transition library acts as a common interface for handling exceptions. The only
thing that needs to be implemented by exception.c is the exc_dispatch routine to
handle the exceptions as required.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully and exceptions are tested using test_exc
Change-Id: I90b4861909189adfe8449b9d4590965e6b743c00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b83c9404407dd4dd2dda4e4eaed0b443f0f58425
Original-Change-Id: Ibb643d7ea2f9aabbc66439549ea2168fd66ced5e
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217143
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9071
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Transition library provides the following functionalities:
1) Setup the environment for switching to any particular EL and jump to the
loaded program at that EL. In short "Execute program X at exception level Y
using the state Z"
2) Provides routines for exception entry and exception exit that can be used by
any program to implement exception handling. The only routine required by the
program would be exc_dispatch which handles the exception in its own required
way and returns by making a call to exc_exit. On exc_exit, the transition
library unwinds the whole stack by popping out the saved state of xregs
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully and exceptions are tested for ramstage on ryu
Change-Id: I8116556109665e61a53e4b3987d649e3cfed64a1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8ab888e8cae0c5f1e79b0e16ca292869f16f1cca
Original-Change-Id: I90f664ac657258724dc0c79bd9f6ceef70064f90
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216375
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9070
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If mmu_init is called more than once then, free_idx should be reset to
1. Here, the assumption would be that mmu_init will not be called more than
once. However, this is not necessarily true. Thus, free_idx should be reset to 1
every time we are initializing ttb from scratch.
BUG=None
BRANCH=None
TEST=Compiles sucessfully and boots to kernel
Change-Id: I5ac0af43346a492583380b0f15101390fc98d182
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 398a68c3b08d82cfa521d235af2c1922629bdf56
Original-Change-Id: Idb7424df7dd577f263f12d1527dbd7fb89216d40
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216906
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9068
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Rush builds were throwing a _sync_sp_el0 exception due
to commit 65af2f3d (tegra132: support arm64 SMP bringup).
Fixed by copying over the rush_ryu devicetree.db, which
adds all the CPUs to the device tree. Basically the same
as commit 8f61ca2da but for rush.
BUG=None
BRANCH=None
TEST=Booted rush OK, brought up rush kernel from USB.
Change-Id: Ia91260ed36364ae1cfdd28932f09df9486c7e638
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 649391a402527cef1465d5a948323ad95c77917d
Original-Change-Id: Ic9e34494ec8e6ad82e6020df6ad6fecd8763ac7e
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217792
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9067
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If there are no devices underneath a device in a devicetree the
bus pointer in a struct device is NULL. Check for this condition
before proceeding in walking through the children devices.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Ran through coreboot w/o any devices under the cpu_cluster device.
No more exceptions.
Change-Id: I9aedbc0dffc638b878bd0ffacfa318b6eb30d504
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d21e181077eba3c5ee03afca1738a24c21a8fc19
Original-Change-Id: I891aeb36319dce67ce9e431156c85c74177c7ab7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217511
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of relying on config variables to determine the current el, use
{read/write}_current macros for accessing registers.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully and boots to kernel login prompt
Change-Id: I6c27571fa65e06e28b71fee3e21d6ca93542e66b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 96aed53b2879310f6f979d5aa78b8d1df7f04564
Original-Change-Id: If4a5d1e9aa50ab180c8012862e2a6c37384f7f91
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217148
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9065
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow read/write to registers at a given el. Also, make read/write registers at
current el call this newly added function.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: I98f35b8d3eb5e292ac895102ad91b675325c08c7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 11d90df1fd92e03c25bfc463429a5f6a8d9d411d
Original-Change-Id: I17de4c4f3bc1ee804422efe5f4703b4dd65b51f2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216904
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to ease the process of reading and writing any register at current EL,
provide read_current and write_current assembly macros. These are included in
arch/lib_helpers.h under the __ASSEMBLY__ macro condition. This is done to allow
the same header file to be included by .c and .S files.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Compiles successfully
Change-Id: I51749b6e4ae7b1ffbaae28d915cd100a28959f26
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c11c7287f507fa398cbbee75abc2bd11140ef19b
Original-Change-Id: I1258850438624abfe3b1ed7240df0db0e7905be6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9062
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>