It does not change once a frequency has been set, so store it somewhere.
Since this changes the saved data definition, update MRC_CACHE_VERSION.
As SNB will eventually use the same code, only IVB is being refactored.
Change-Id: I25b7c394abab173241fffdf57ac5c929daad8257
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There is no need to call get_FRQ a dozen times with the same parameters.
As SNB will eventually use the same code, only IVB is being refactored.
Tested on Asus P8Z77-V LX2, still boots with i7-2600 and i5-3330.
Change-Id: Idd7c119b2aa291e6396e12fb29effaf3ec73108a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix "WARNING: document isn't included in any toctree" by adding
the lemp9 to mainboard/index.md.
Change-Id: Id6d8f9e2aab6dc7ad4baf1b37d88e531acb757f4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Instead of adding more versions of the `*pch.asl`, unify the existing
ones and allow to override the register locations via Kconfig. The
current defaults should work for Skylake and some newer platforms.
TEST=Booted ThinkPad X201s, backlight control still works.
Change-Id: I0b21d9a0288f0f8d6cb0a4776909bffdae7576f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
The 2nd COM port's base address defaults to 0x2f8. Current software
for this system expects the port at 0x3e8.
Configure COMB to use 0x3e8 instead of 0x2f8.
BUG=N/A
TEST=tested on facebook monolith
Change-Id: Ibb462bad5f0594e0b5c8dea6e02cd42d58d999ab
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Remove unused SMM_STORE space and use it for RW_LEGACY area
BUG=None
TEST=None
Change-Id: I5724b860271025e8cb8b320ecbd33352ef779660
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
The concerned GPIO is configured as an open drain at the Embedded
Controller side without an external pull-up. This causes leakage in the
PP3300_A rail. So configure the GPIO to have a weak internal pull-up at
the SoC side.
BUG=b:151680590
TEST=Build the mainboard. Ensure that there are no leakages in the
PP3300_A rail.
Change-Id: I5553cf40adb92edc0fecab5c875ec8d72063ba7b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The dependency for `ifittool` was missing in the CONFIG_UPDATE_IMAGE
case. Which led us to the question: Why run `ifittool` in this case?
The idea of CONFIG_UPDATE_IMAGE is to update everything _but_ the
bootblock.
Change-Id: I7fd3bd1b56f495b16beb1e1f4b35b8cfcf25b2ba
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39803
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The EEPROM layout is rather arbitrary and /just happened/. It needs a
256kbit part at least.
Change-Id: Iae5c9138e8404acfc3a43dc2c7b55d47d4147060
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36298
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD's Family 17h SoCs share the same video device ID, but may need
different video BIOSes. This adds the common code changes to check the
vendor & device IDs along with the revision and select the correct video
BIOS to use.
Change-Id: I2978a5693c904ddb09d23715cb309c4a356e0370
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/2040455
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
AMD's Family 17h SOCs have the same vendor and device IDs for
their graphics blocks, but need different video BIOSes. The
only difference is the revision number.
Add a Kconfig option that allows us to add the revision number
of the graphics device to the PCI option rom saved in CBFS.
Because searching CBFS takes a non-trivial amount of time,
only enable the option if it's needed. If it's not used, or
if nothing matches, the check will fall through and search for
an option rom with no version.
BUG=b:145817712
TEST=With surrounding patches, loads dali vbios
Change-Id: Icb610a2abe7fcd0f4dc3716382b9853551240a7a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/2013181
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Picasso and Dali need different video bioses even though they use the
same code in most other places.
The Kconfig symbol names are changed from the downstream commit to make
them more consistent with current coreboot code.
BUG=b:145817712
TEST=Build Dali vBIOS into the coreboot image
Change-Id: Ide0d061fda0abc78a74ddf97ba81fc3cf2b02e4f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/1956534
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
We should only define function to get lid switch and recovery mode
switches when CHROMEEC_SWITCHES is not available. Correct this to avoid
compilation issues
BUG=None
BRANCH=None
TEST=jslrvp code compilation is fine
Change-Id: I2445d40da1540c9d8c8c5fc845a4f38a5abf983e
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39585
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make use of the publicly-available FSP binaries and headers for Comet
Lake. Also, remove the Comet Lake header files from src/vendorcode,
since they are no longer necessary.
Change-Id: I392cc7ee3bf5aa21753efd6eab4abd643b65ff94
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39372
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add memory initialization parameters for Jasper Lake RVP boards
Jasper Lake RVP supports two variants, one with memory LPDDR4
and another with DDR4
Based on board id, mainboard will pass correct memory parameters
to the fsp.
BUG=None
BRANCH=None
TEST=Check compilation for Jasper Lake RVP and check memory training passes.
Change-Id: Idc92363a2148990df16c2068c7986013d015f604
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39195
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The chip.h for this driver was updated to add a reset GPIO, but did
not add the required #include of <arch/acpi_device.h>. This likely
still compiled because other chip.h files included before it may have
included it themselves.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I13200f7347fd17739a377e8ad0906ab7e5d6ae1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39677
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ACPI Spec 2.0 states, that Processor declarations should be made
within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated
and is removed here.
Additionally add processor scope patching for P-State SSDT created by
AGESA, becasue AGESA creates the tables with processors in \_PR scope.
TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are
no errors, decompile ACPI tables with acpica to check whether the
processor scope is correct and if IASL does not complain on wrong
checksum, run FWTS
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A bigger than zero value of bmc_boot_timeout must be set
for KCS ipmi_get_bmc_self_test_result() to run, otherwise
the self test result will be error and won't write SMBIOS
type 38 table. Here we set 60 seconds as the maximal self
test timeout.
Tested=Check if the BMC IPMI response data and SMBIOS type
38 on OCP Tioga Pass are correct or not.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I3678973736a675ed22b5bc9da20a2ca947220f4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
To use Intel common block LPC function that enables the IO ranges
defined in devicetree.cb.
Tested on OCP Tioga Pass with BMC LPC working.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I675489d3c66dad259e4101a17300176f6c0e8bd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38994
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The timing tables for Sandy Bridge are a subset of Ivy Bridge's tables.
Move the latter to a common place, and use it for both generations.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, both work.
Change-Id: Id14227febf4eebb8a2b4d2d4f37759d0f42648c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39735
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nuvoton NCT5104d has no LDN 0xe according to its datasheet.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0d34218d88b779b08c380d2396ff9ab9253597fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Enable ASPM L0s and L1, Common Clock and Clock Power Management for
all PCIe ports.
TEST=boot Debian linux and check new PCIe capabilities appear in lspci
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0a4c83731742f31ab8ef1d326e800dfdc2abb1b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
PC Engines apu2 had many problems with PCIe cards detection. The cards
were inconsistently detected when booted from G3, S5 or after a reboot.
AGESA can reset PCIe slots using GPIO via callback. Use it to reset the
slots that support using GPIO as reset signal.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8ff7db6ff85cce45b84729be905e6c895a24f6f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The `link_frequency_270_mhz` setting was originally used by the native
graphics init code for Sandy/Ivy Bridge, which is long gone.
The value of this information (which board had it set) is questionable.
The only board that had an LVDS panel and set it to 0 was the ThinkPad
L520, where native graphics init was never reported to work. Also, the
native graphics init only used it for calculations, but never confi-
gured the hardware to use a specific frequency. A look into the docu-
mentation also doesn't reveal any straps that could be used to confi-
gure it.
Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PWM-granularity chicken bit in the Wildcat Point and Lynx Point
PCHs has actually the opposite meaning of the one for Sunrise Point
and later. When the bit is set, we get a divider of 16, when it's
unset 128. Flip the bit!
Change-Id: I1dbde1915d8b269c11643a1636565a560eb07334
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
_DCS, _DGS and _DSS are required by specification. However,
we never implemented them properly, and no OS driver com-
plained yet. So we stub them out and keep the traditional
behavior in case an OS driver checks for their existence.
The old implementations also only returned static values as
there never was any write to their GNVS variables. The TRAP()
that was called in one place is actually implemented by some
ThinkPad's SMI handler as docking event. However, as the call
precedes these SMI handlers in coreboot history, it's most
likely an accident.
Change-Id: Ib0b9fcdd58df254d3b2290900e3bc206a7abd92d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Add the inteltool path to the include path to be able to avoid ugly
include hacks like `#include "../inteltool.h"`.
Change-Id: Id363fa20fe3b52248a224ca14b2626a8e3ce44a2
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39744
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The format for VPD has changed s.t. the first NIC should
always have a zero concat to the end. drivers/net supports
this with the workaround of setting the idx to 1.
The longer term fix is to adjust all the respective boards
to shift back by one and adjust drivers/net friends to
remove the 'special casing' of idx == 0.
Background:
https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn
BUG=b:152157720
BRANCH=none
TEST=none
Change-Id: I510428c555b92398a5199b346dffb85d38495d74
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
According to the latest Tigerlake Platform FSP Integration Guide, the
minimum amount of stack needed for FSP-M is 256KiB. Change
DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined
empirically). JSL requires 192KiB.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic9be6446c4db7f62479deab06ebeba2c7326e681
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Northbridge IOAPIC was not being initialized which caused its APIC ID to
be set to 0 (the same APIC ID as BSP).
TEST=boot Debian Linux on PC Engines apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id06ad4c22a56eb3559e1d584fd0fcac1f95f13e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Now that we have it, we might as well pass it around.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: Ia5aa2f932321983f11d2f8869aa624832afe9347
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39721
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Native raminit asserts that the DIMMs haven't been replaced before
reusing the saved training data. However, it does not check if the CPU
is still the same, so it can end up happily reusing data from an Ivy
Bridge CPU onto a Sandy Bridge CPU, which runs the raminit_ivy.c code
path. This can make the CPU run in unsupported configurations, which may
result in an unstable system, or a failure to boot.
To prevent that, ensure that the stored CPUID matches the CPUID of the
installed CPU. If they differ, print a message and do not use the saved
data. As it does not pose a problem for a regular boot, but precludes
resuming from S3, use different loglevels depending on the bootpath.
Tested on Asus P8Z77-V LX2 with an i7-2600 and an i5-3330, works well.
Change-Id: Ib0691f1f849b567579f6afa845c9460e14f8fa27
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of storing an int with a single bit of information taken from
the CPUID, we might as well store the actual CPUID. And since we are
changing the definition of the saved data, bump the version number.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: I6ac435fb83900a52890f823e7614055061299e23
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39720
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When changing any of the structures that are cached in non-volatile
storage, it is necessary to bump MRC_CACHE_VERSION so that the old
information is not misinterpreted.
Change-Id: Idefbc38b3a8198b1b5909e775b3c289db689fc0c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39756
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Header files are supposed to not make allocations from .bss. Builds
fail if said file is included multiple times. To prevent this from
happening, move the definitions to a C file.
Also, rename raminit_patterns to raminit_tables. This is because more
tables that are not patterns will be added here in subsequent changes.
Tested on Asus P8Z77-V LX2, still boots fine.
Change-Id: If8e3a285ecdc4df9e978ae156be915ced6e1750b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39754
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make them fit in 96 characters, so that Jenkins does not complain.
With BUILD_TIMELESS=1, the binary of ASUS P8Z77-V LX2 remains identical.
Change-Id: I4a763f6050593e9d4db9211bfeedb442724e1ace
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39719
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ACPI Spec 2.0 states, that Processor declarations should be made
within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated
and is removed here for Intel CPUs only.
Tested on:
* X11SSH (Kabylake)
* CFL Platform
* Asus P8Z77-V LX2 and Windows 10
FWTS does not return FAIL anymore on ACPI tests
Tested-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
According to BKDGs these northbridges should support the K10
compatible temperature sensors.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Icbdf44508085964452d74e084b133f1baa39e1a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
According to BKDGs HTC temperature limit field indicates the threshold
where HTC becomes active. HTC active state means that processor is
limiting its power consumption and maximum P-State. Using this threshold
as _CRT is incorrect, since HTC active is designed to prevent
overheating, not causing immediate shutdown.
Change the behavior of temperature limit to act as a passive cooling
threshold. Make the passive cooling threshold a reference value for
critical and hot temperature with 5 degrees step.
TEST=boot FreeBSD on PC Engines apu2 and check the thermal zone
temperature using sysctl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ife64c3aab76f8e125493ecc8183a6e87fb012e3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fixes a blunder in commit 50db9c99be
(nb/intel/sandybridge: Use DIV_ROUND_UP macro to select timings).
Tested on Asus P8Z77-V LX2, still boots fine with an i7-2600.
Change-Id: I73436b9f7df9f3a065469fb89bcd0cc6183bb774
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Angel Pons