A late change went into v3+ of reference schematics which inverted
EN_PWR_WIFI to meet PCIe reset/power timings for WiFi device. This is
incorporated into v3.51+ for Trembyle reference and v3.2+ for Dalboz
reference. However, some variants are built with v3+ reference
schematics, but without the inversion of EN_PWR_WIFI polarity. Thus,
we need to add support for following combinations:
1. Pre-v3 Schematics
2. V3+ Schematics
3. V3+ Schematics + Active low wifi power
This change adds a new Kconfig
`VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW` that sets the minimum
board ID that has EN_PWR_WIFI active low in hardware. Variants that
missed this change in V3+ integration (berknip and vilboz) have board
IDs set to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS + 1. For others, this
defaults to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS.
BUG=b:159749536
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib8da7fba5f4a518a51b203d6a01a9551e261d8b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change moves variant_sleep_gpio_table() definition to dalboz and
trembyle references to allow each to make their own changes.
BUG=b:159749536, b:159453643
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I15b19cea05f1a540c56b6bc0507306d2348ac17f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change moves PCIE_RST1_L deassertion to happen as part of
variant_pcie_power_reset_configure() instead of
variant_romstage_entry() since romstage is guaranteed to run 100ms+
after PP3300_NVME is enabled. This is one of the first things that
coreboot on x86 does as part of early mainboard configuration.
Additionally, this change also drops deassertion of PCIE_RST0_L on bid
1 for dalboz since PCIE_RST0_L is already deasserted much earlier in
the boot flow.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ib734aa6ff664268e68388b1997ddce676504f8d2
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261996
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Aaron Durbin <adurbin@google.com>
Tested-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change configures GPIO_40 (NVME_AUX_RESET_L) as drive low in
sleep path so that the PERST# to NVMe device keeps asserted until
coreboot reconfigures it as high on S3 resume path. This is similar to
the earlier change for PCIE_RST1_L but helps platforms that use
NVME_AUX_RESET_L instead of PCIE_RST1_L. GPIO_40 lives in S5 domain,
hence it retains state across S3 entry/exit.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ie79e946eee8f393863630226ae2183e653030415
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261117
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change configures PCIE_RST1_L as GPO driven low on the sleep
path. This is required to keep PERST# asserted to devices until
coreboot deasserts it on S3 resume path. Without this change, on S3
resume, PCIE_RST1_L gets deasserted sooner than required resulting in
violation of PCIe reset timings.
With this change, the behavior of PCIE_RST1_L is as follows:
1. GPIO27 is configured as NF (PCIE_RST1_L) in coreboot
bootblock/romstage and driven high.
2. On S3 entry, GPIO27 is configured as GPO driven low.
* Boot out of G3: Timing should be met since GPIO_27 is pulled down by
default until coreboot configures it.
* S3 resume: Timing should be met since GPIO_27 is configured as GPO
low and it retains state across S3 entry/exit. So, should be low
until coreboot configures it.
* Warm reset: Timing should be met since it is configured as NF. So,
hardware guarantees the reset timing as seen in "warm reset.jpg" in
#46.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia0ad1522edc438fd054d927ef4a2ab5c27329c00
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261116
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change turns off power to camera and pen devices when entering
sleep since they do not act as wake sources in S3. Power to trackpad
and WiFi is left enabled since they are wake sources for S3.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I21bcdd53370372c7d43c3b685abb2a9171e42d22
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261115
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds support to configure GPIOs on the sleep path. This is
required to turn off power to devices that do not act as wake sources
and to assert reset to devices.
Currently, variant_sleep_gpio_table() returns an empty table by
default. In the following changes, entries will be added to
gpio_sleep_table.
BUG=b:152582706
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I7286cbf165024bdd81f8748e525542dce8dd8702
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253642
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
These were copied from gm45, but are not used. Drop them.
Change-Id: I85ca37516272a2c1af88a65df2682e92d7579050
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This function isn't defined anywhere for Pineview. Drop its declaration.
Change-Id: I38a01d6ba5aaa91de08702c1eb8a2e8c70688192
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is a W/A to avoid a communication issue with CSE Lite over Heci
interface. This will help to avoid boot failures with CSE Lite until
the permanent fix is available.
BUG=b:159884143
TEST=build and boot volteer with serial and non-serial image
Change-Id: Ib136a2154b36c63c7147bbcfbf1ca7beac3a5685
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42790
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Override VBT for nightfury SKU_ID = 2 to support different panel.
BUG=b:159051021
BRANCH=firmware-hatch-12672.B
TEST=Built and verified using different VBT by SKU_ID
Change-Id: I9450814aadc43cc7991457c3793f109b889186b9
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update fixes build issues with host GCC 10.
Other changes:
https://acpica.org/node/177https://acpica.org/node/178https://acpica.org/node/179https://acpica.org/node/181
acpinames utility removed:
"Removed support for the acpinames utility. The acpinames was a simple
utility used to populate and display the ACPI namespace without executing
any AML code. However, ACPICA now supports executable opcodes outside of
control methods. This means that executable AML opcodes such as If and
Store opcodes need to be executed during table load. Therefore, acpinames
would need to be updated to match the same behavior as the acpiexec
utility and since acpiexec can already dump the entire namespace (via the
'namespace' command), we no longer have the need to maintain acpinames."
Change-Id: Ibd995561ca53458b04f87cee5693850c0d90d3d6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38907
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
in some m/b+BOE panel(G2 TS), G2 TS may still have chance to lost even
rst delay time already meets spec definition: 10us (minimum).
Restore G2 TS RST delay time to 50ms, we could have G2 TS working fine
on those specific m/b+BOE(G2 TS) panel.
BUG=b:159510906
BRANCH=master
TEST=emerge-zork coreboot
boot with G2 TS, make sure G2 TS is functional
Change-Id: Ic629c6c61572ab564def8893ce8d78dfb37d4590
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Configure sataHotPlug in devicetree, as this functionality
is now available for this soc.
Change-Id: If462e33d1bbef8036d598970fb2774d0fda1fbb1
Signed-off-by: Jonas Loeffelholz <Jonas.Loeffelholz@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42804
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hook up the FSP UPD
Change-Id: I6b479bfc83492440eac97cdc8dcc560b6abf4fdf
Signed-off-by: Jonas Loeffelholz <Jonas.Loeffelholz@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42803
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Many previous versions of this function would return early if tcc_offset
is 0. This adds that logic back in.
Change-Id: Ibc529520a4e74608cb5d20e5a6e8fc2c727c903c
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Use some defines as well for clarity.
Change-Id: I83204a1a39534066a5f32f6e33a1bed0c827392f
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42898
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds Platform-Wide _OSC capabilities for native USB4
support. There is Engineering Change Request (ECR) with _OSC addition
for OSPM USB support. ACPI section 6.2.11.1.13 is modified with bit 18
as native USB4 support. The OS sets this bit to indicate support for
an OSPM-native USB4 Connection Manager which handles USB4 connection
events and link management. The OS use the _OSC mechanism and the bit
defined in this ECR to obtain configuration and connection management
capabilities of USB4 connections. This change also fixs the byte index
for the DWord-addressable field CDW3 from the capabilities buffer.
BUG=b:140645231
TEST=Check Type C device all ports connection/enumeration with SW CM.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1b561ea5a0a6b440cca3152cc150f31abf7766ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove a comment since is not useful anymore.
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: I236b040a83700bcd34d99db61e5dad0ff7abb28c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add closing quotation mark to fix Kconfig warning.
Change-Id: I75e8d23b81266553d7c40de7f52c6c03107c43de
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The table in CBMEM was never allocated with i82801dx.
Change-Id: I4ad97f6504e0f1b22d16210b7dbf5164852cb232
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42851
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
due to overridetree.cb set disable_xhci_lfps_pm = 0,
need correct condition expression to let function work.
BUG=b:155955302
BRANCH=octopus
TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash
the image to the device. Run following command to check if
bits[7:4] is set 0:
>iotools mmio_read32 "XHCI MMIO BAR + 0x80A4"
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current implementation of acpi_dp_write() frees the node after it
has written it.
If the structure contains a ACPI_DP_TYPE_CHILD then a recursive call to
acpi_dp_write() frees the child and then frees it again when returning
from the call. This results in a double free.
Split the implementation into two steps, one that ones and one that
frees. This is easier to understand and fixes the bug.
Note: This likely has no effect in coreboot since it doesn't seem to
have a proper free() implementation. But it might gain one one day.
BUG=none
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ife3917af10bc35a3c3eee38d8292f927ef15409d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42892
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change clears interrupt and wake status for a pad when
configuring it. This ensures that stale interrupts/wake notifications
are flushed out and do not cause spurious wakes in future suspends.
BUG=b:159944426
Change-Id: Ia4ebd975312a4136f1d0690d7af7372615e31f0f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42877
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`flags` field of soc_amd_gpio structure is set only for SCI and SMI
configurations. This change adds a new helper macro
PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members
including `flags` field. This can be used directly by PAD_SCI and
PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses
PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of
redundant parameter 0 for flags for all other pad configurations.
BUG=b:159944426
Change-Id: I835b62f5502375ffc4215548b51338a67546d699
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, for Stoneyridge and Picasso mainboards, pads that are
configured for SCI/SMI/WAKE need to have multiple entries in the
configuration table - one for PAD_GPI and other for the special
configuration that is required. This requires a very specific ordering
of pads within the table and is prone to errors because of conflicting
params provided to the different entries for the same pad. This also
does not work very well with the concept of override GPIOs where the
entry in base table is overridden with the first matched entry from
the override table.
This change updates the way GPIO configuration is handled for special
routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of
soc_amd_gpio structure in the macros performing these
configurations. Also, program_gpios() is updated to perform a write to
GPIO control register instead of read-modify-write. This is because
mainboard is expected to provide only a single configuration entry for
each pad within a given table. Thus, there is no need to preserve
earlier configuration.
Mainboards that were providing multiple entries for a single pad are
updated accordingly.
BUG=b:159944426
Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some codepaths want to set selected bits of a hardware register
to match those of a given variable in memory. Provide a helper
function for this purpose and use it in gpio_set(),
gpio_input_pulldown() and gpio_input_pullup().
This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to
include all bits dealing with pull and output respectively.
Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
H1 is not a wake source and hence there is no need to configure SCI
GEVENT for it. This change drops PAD_SCI() configuration for GPIO_9
i.e. H1_PCH_INT_ODL.
BUG=b:159944426
Change-Id: Iec2285b76f9c5fa1b4b1be15128fea316fa04555
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
GPIO_137 does not have any gevent associated with it. This change
drops the configuration of GPIO_137 as SCI for padmelon.
Change-Id: I0579d05bda4523bbb5e3441d2a3b6e2b33b05cfc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42873
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds helper macro PAD_CFG_STRUCT for setting the fields
of `soc_amd_gpio`. Additionally, macros are added for different
operations i.e. pull, output, trigger, int_enable, event_trigger,
wake_enable, debounce, etc. All GPIO configuration macros are updated
to use PAD_CFG_STRUCT instead of setting the fields directly.
BUG=b:159944426
Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates the macros for GPIO debounce to add _DEB_ in the
name. This is done to make the names consistent with rest of the GPIO
control field names.
BUG=b:159944426
Change-Id: Ic47678108c871c5f1cd0d512783230f18adf3484
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change renames GPIO macros as follows:
1. Pad filtering macros are renamed to GPIO_TRIGGER_ and
GPIO_ACTIVE_. This determines the filtering applied on the input
signal at the pad.
2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_.
_INT_ is dropped from pad filtering macros because the filtering
applies to the input signal irrespective of how it is routed. It is
applied at the pad not only for GPIO interrupts but also for other
routes i.e. SCI, SMI, etc.
BUG=b:159944426
Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`soc_amd_gpio` structure uses a flag field to store additional
information about GPIO configuration that does not end up directly in
the GPIO control register. However, the naming for these flags is not
consistent across event triggers and special configurations. This
change updates the flag names to be consistent (starting with
GPIO_FLAG_*) and adds some helper functions for GPIO events.
In the following CLs, more changes will be made to drop some of the
special flags which are not really required.
BUG=b:159944426
Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In some rare cases it seems that make tries to build
$(objgenerated)/assembly.inc before the build-dirs target has finished,
and so assembly.inc can't be written. Enforce that build-dirs is done
before assembly.inc starts.
BUG=chromium:1098215
BRANCH=none
TEST=none
Change-Id: Ib141ea45a43836cfdde0059523c331fe5286b06d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Align support for enable wake-on-usb attach/detach as was
introduced in Skylake in
`commit 3bfe3404df32ca226c624be0435c640bf1ebeae7`.
This adds the USB Wake Enable Setup (UWES) ASL blocks
required to inform the OS about plug wake events bits
being set in the PORTSCN register configured by devicetree.
BUG=b:159187889
BRANCH=none
TEST=none
Change-Id: I6c63d226e5acadff04486c8a6764fb715a0ac051
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This enables Thermal Control Circuit (TCC) activation feature to set
tcc_offset value to new value in devicetree.
BUG=None
BRANCH=None
TEST=Built for dedede platform and verified the MSR value
Change-Id: I58e4fa362f20efeef84e06e64d70ee7c4f9554d6
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Set tcc_offset value to 10 in devicetree for Thermal Control
Circuit (TCC) activation feature.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value
Change-Id: I6438547e09a3ff3a1c01addfcc01383e89f5b435
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This enables Thermal Control Circuit (TCC) activation feature to set
tcc_offset to new value in devicetree.
BUG=None
BRANCH=None
TEST=Built for volteer platform and verified the MSR value.
Change-Id: I36b0d6aad4be8a9cbb145dcd66d65235d3f6ac35
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Commit 0013623 (mb/google/dragonegg: remove abandoned project) dropped
this mainboard because it is no longer in development nor used. However,
the associated documentation remained. Rest in pieces, Dragonegg. ;-;
Change-Id: Idd2ee716717132ba3fa237ae97f34686007d3685
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bring all GNVS related initialisation function to global
scope to force identical signatures. Followup work is
likely to remove some as duplicates.
Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds a separate blobs repository for Qualcomm blobs,
analogous to the existing AMD blobs. Qualcomm's binary licenses allow
files to be redistributed and used by anyone, but they explicitly
require the user to agree to the license terms when just *downloading*
the binary (even if they're not using them to build any firmware). Some
community members do not like to have to agree to licenses for files
they're not actually using, so we are keeping these files separate from
the main blobs repository and adding an extra Kconfig to make sure the
user is aware of and must explicitly agree to this before downloading
these files.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I247746c1b633343064c9f32ef1556000475d6c4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit dae95f0dfe.
There is filename conflict with top-level <gpio.h> and incompatibility
with it. Only use was AMD_PI_KERN and we have no such platform in the
tree anymore.
Change-Id: I120b0bfda1501e9941c71315852d87d251f76a5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42743
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Furquan Shaikh