This is an ATX mainboard with a LGA1155 socket and four DDR3 DIMM slots.
Porting was done using autoport and then doing a bunch of manual edits.
Working:
- All four DIMM slots
- Serial port to emit spam
- PS/2 keyboard
- S3 suspend/resume
- Rear USB ports
- Integrated graphics (libgfxinit)
- HDMI and VGA
- All PCIe ports
- Realtek GbE (coreboot must set the MAC address)
- Both PCI ports behind the ASM1083 PCI bridge
- SATA ports
- Native raminit
- Flashing with flashrom
- Rear audio output
- VBT
- SeaBIOS to boot Arch Linux
Untested:
- PS/2 mouse
- The other audio jacks
- EHCI debug
- Front USB headers
- Non-Linux OSes
Change-Id: Ia5d9176b6f435977ecdd4fc82fc4bc0974d8d6a4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Only some mainboard vendors have a prompt for this option. Let's be fair
and give this ability to everyone.
Change-Id: I03eec7c13d18b42e3c56fb1a43dc665d5dbd1145
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
They are downright useless and result in ACPI errors. So, burn them.
Also, do a minor update to autoport's README about these values.
Change-Id: Idb5832cfd2e3043b8d70e13cbbe8bd94ad613120
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Set up the proper IRQ routing for OHCI/EHCI devices which appear if
XHCI controller is disabled (CONFIG_HUDSON_XHCI_ENABLE is not set).
Now both "USB 3.0" ports are working fine at OHCI/EHCI "USB 2.0" mode.
They also work fine if XHCI controller is enabled.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I50a773eeab890627abc963e0a61f781d1cea3259
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Use lowercase for hex constants, remove registers that default to zero
already and drop outdated comment about AHCI mode.
Change-Id: I6833462ea11e988eaab7913cf98853cebe4c7a9f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
They default to zero already. Moreover, the comment about AHCI mode no
longer applies, as it was made the default mode.
Change-Id: Ife99a79df0289c6db87510ed917438bf47b7f6ca
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Replace a bunch of spaces with tabs, put host bridge and friends above
southbridge, fix "TPM Module" (Trusted Platform Module Module) and add
some empty lines to help the reader.
Change-Id: I3a89893f943057ef7a4f973eaa65dba259e8a49d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This touches several mainboards. Replace the macro with C functions.
The presence of bootblock.c is assumed.
Change-Id: I583034ef0b0ed3e5a5e3dd680c57728ec5efbc8f
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Long-term plan is to support loading runtime configuration
from SPI flash as an alternative, so move these prototypes
outside pc80/.
Change-Id: Iad7b03dc985550da903d56b3deb5bd736013f8f1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38192
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The majority of Socket AM1 APUs [1] - three out of five - have the integrated
VGA with 1002,9830 ID, while only one Sempron has 1002,9836. Since VGA_BIOS_ID
is already defined in fam16kb Kconfig as 1002,9830 ID, drop the value here.
[1] https://en.wikipedia.org/wiki/List_of_AMD_accelerated_processing_units#%22Kabini%22_(2013,_SoC)
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I75c815b13934afcb5be316f85933f7c200d55bbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33777
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Denary, also known as "decimal" or "base 10," is the standard
number system used around the world. Therefore, make use of it.
Change-Id: I7f2937bb7715e0769db3be8cb30d305f9d78b6f8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Remove commented-out entries in dsdt.asl, and then remove files that do
not get built.
Change-Id: I579e7ffbc2d6596fd7ffe6863ff3b3fb14b0ade6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Don't initialize fields with zeroes since gnvs structs were zeroed out
in southbridge already. See
* src/southbridge/intel/*/lpc.c
Change-Id: I5228f2cdc94df722ffa687c45b4e4fd25e82df82
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The gnvs structure was zeroed out before calling acpi_create_gnvs(...)
in the following files:
* src/southbridge/intel/*/lpc.c
Change-Id: Id7755b1e4b8f5cb8abd1f411b5dc174b6beee21c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37956
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously, each Intel chipset had its own sleepstates.asl file.
However, this is no longer the case, so drop these comments.
Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Switching was done by moving a SIO configuration and
the clocks setup from 'romstage.c' to 'bootblock.c',
following the example of change CB:37719 (fc749b2).
TEST=Boots into Artix Linux 2019 without a problem.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I780fa87cb9cb3c45844c388331ef89eb8eb70ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
It provides no useful information, so it might as well vanish.
Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Also, don't define the default as this results in spurious lines in the
.config.
TEST: Build all boards with where config.h differed with
BUILD_TIMELESS=1 and remained the same
Change-Id: Ic77b696f493d7648f317f0ba0a27fdee5212961e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31316
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per the 4.11 release requirement, C_ENVIRONMENT_BOOTBLOCK=y
is a mandatory feature, which most AGESA and binaryPI boards lack.
Disable such platforms from the build for the time being.
The Kconfig symbol has been flipped, ROMCC_BOOTBLOCK=n is the
same mandated feature as C_ENVIRONMENT_BOOTBLOCK=y.
If a platform does not reach ROMCC_BOOTBLOCK=n within a
reasonable timeframe both the mainboard and the respective
unused platform support code will get removed.
Change-Id: I7fceb0370f7f4f5f52080277c5d21615d3ab3454
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
These entries have no functional purpose, followup work will
disallow chip entries that do not link in the respective
driver.
Change-Id: Ieab695022d0dd2f2671f9058db97bdd6fb29a10d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Denary, also known as "decimal" or "base 10," is the standard
number system used around the world. Therefore, make use of it.
Change-Id: Ia22705d7629a322292cfd557add9cfadc649c16c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37537
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
PCIe root port clock gate is already enabled at i945/early_init.c
Also fix comments when only PCIe root port is enabled.
Change-Id: Ica38529dbdd5cc51b19b426999a1d9f0b678b4f5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37576
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Because the function is implemented in C, post_code() calls
from cache_as_ram.S and other early assembly entry files may
not currently work for cold boots. Assembly implementation
needs to follow one day.
This effectively removes PORT80 routing from boards with
ROMCC_BOOTBLOCK.
Change-Id: I71aa94b33bd6f65e243724810472a440e98e0750
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Allows boards to be transformed to C env bootblock one
at a time.
Change-Id: I1cc1910a8bfb6b3495593979cbf7194b0d82c8e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37345
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kconfig became stricter on what it accepts, so accomodate before
updating to a new release.
Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
