Revert the upgrade as it breaks at least the devicetree parser on
aarch64, tested on qemu aarch64 target.
This reverts commit dfd3f21174.
Change-Id: I65607817188db21533014caa6d15be9a2004d498
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The latest debian builder image doesn't compile GDB correctly. Disable
the build test until I can get it working again.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I7852a39ed40a7364d24d0bbf014fd25058491083
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39575
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The X210 EC reports battery values in broken mAh. These have to be
adjusted by 10000 * DGVO, as documented in
https://github.com/torvalds/linux/blob/master/drivers/acpi/battery.c.
Taken from https://github.com/harrykipper/coreboot, commits
2f68f138adb25605e5715896636cf33f6de5bd95
c1c72cc43708a6647f263a767c39cf3072908e20
Change-Id: Ie097272443b18b16c3937034f874d3b5a6bdd62a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39142
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Add USB ports for SD card reader, fingerprint reader,
and internal port.
- Enable PcieRpClkReqSupport on NVMe root port,
correct values for ClkReq/ClkSrc.
- Improve comment for M.2-2230 USB port (BT)
Parts derived from x210_test branch of HarryKipper's repo:
https://github.com/harrykipper/coreboot
Change-Id: Ib64629ada4726e5edc080608f71a51f56a9b747c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems,
based on a modern Kabylake CPU. It also ships with no firmware protection,
(IFD is fully unlocked, no protected regions are set, no Bootguard),
making it an ideal coreboot target. This port is based on the support for
the Skylake-based Purism Librem 13v3, with the following significant
changes:
* EC firmware is contained within the system SPI flash, and so a blob of
EC firmware must be injected to a defined location during image build.
* GPIO layout is different - this is currently just a raw import of the
GPIO configuration from the vendor firmware
* The system has two DIMMs, so an additional SPD address has been added
* The USB port layout is different
* The EC must be enabled at boot time through SuperIO-style logical device
configuration
* EC register layout is different, necessitating changes in the ACPI tables
* The HDA pins are different
* The genx_dec config is different
All hardware appears to work as expected, although the SD reader is
untested.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add support for the NPCE985LA0DX, as used on the 51NB X210
(to be added in a follow-on commit, and from which this was extracted).
Original source: https://review.coreboot.org/c/coreboot/+/32531/37
Change-Id: I5798fad7fd18083cde1aa647fd91ca9c5ce963b7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is new Elan touch screen IC, which includes touch panel and USI pen.
BUG=b:151514167
TEST=build bios and verify touch screen works fine
Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com>
Change-Id: I98801b8c31812637f71d7eaaa0f12b47901dc47a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Now that SMMSTORE is implemented across all platforms that
Tianocore supports, default to selected so that NVRAM
functions and Tianocore setting saved as users expect.
Change-Id: I067e5faee73cba585a1123215ed2d80e3eaa7877
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Below changes are done:
1. Allow execution of HMRFPO_ENABLE command if CSE meets below
prerequisites:
- Current operation mode(COM) is Normal and Curret working state(CWS)
is Normal.
-(or) COM is Soft Temp Disable and CWS is Normal if ME's
Firmware SKU is Custom.
2. Check response status.
3. Add documentation for send_hmrfpo_enable_msg().
4. Rename padding field of hmrfpo_enable_resp to reserved.
The HMRFPO (Host ME Region Flash Protection Override) mode prevents CSE to
execute SPI I/O cycles to CSE region, and unlocks the CSE region to perform
updates to it. This command is only valid before EOP(End of Post).
For Custom SKU, follow below procedure to place CSE in HMRFPO mode:
1. Ensure CSE boots from BP1. When CSE boots from BP1, it will have
opmode Temp Disable Mode.
2. Send HMRFPO_ENABLE command to CSE. Then, CSE enters HMRFPO mode.
CSE Firmware Custom SKU Image Layout:
= [RO] + [RW + DATA PART] = [BP1] + [BP2 + DATA PART]
Here, BP1 will have reduced functionality of BP2, and the BP1 will be
CSE's RO partition and [BP2 + DATA PART] together will represent
CSE's RW partition. CSE can boot from either BP1(RO) or BP2(RW).
CSE Image Layout in Consumer SKU: BP2 + BP3 + DATA PART
TEST=Verfied on hatch board.
Change-Id: I7c87998fa105947e5ba4638a8e68625e46703448
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
- Reformat some lines of code
- Put names to all MCHBAR registers in a separate file
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
- Align a bunch of things
Tested with BUILD_TIMELESS=1, foxconn/d41s remains unaffected.
Change-Id: I29104b0c24d66c6f49844f99d62ec433bb31bdaf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:
- Hillel: 32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics
This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.
Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is for Arrandale CPUs, whose System Agent is Ironlake.
This change simply replaces `nehalem` with `ironlake` and `NEHALEM`
with `IRONLAKE`. The remaining `Nehalem` cases are handled later, as
changing some of them would impact the resulting binary.
Tested with BUILD_TIMELESS=1 without adding the configuration options
into the binary, and packardbell/ms2290 does not change.
Change-Id: I8eb96eeb5e69f49150d47793b33e87b650c64acc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38941
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Drop dummy entry.
Change-Id: I1257115bd73fe90c6435116c8705cb5c98d945e1
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39559
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Store LID status into LIDS and change device name to LID0.
Then Intel driver can reference it.
BUG=b:151134069
TEST=check LID status by evtest
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ifdac938730eac034b626aa8ad9d52462f65137ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Remove the switch case in spd_get_banks. The LPDDR4X adapt DDR4 attributes.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icfaefd1856d2350c6e5a91d233ccdb10d5259391
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Check for dev enabled status for CNVi and update the
UPD accordingly.
BUG=none
BRANCH=none
TEST=Build and boot tglrvp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I15a03cc70f12e094badf942dd81f22bd09531051
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Add config to override CpuRatio or setting CpuRatio to
allowed maximum processor non-turbo ratio.
BUG=151175469
BRANCH=none
TEST=Build and boot tglrvp and observe there is no extra reset
in meminit.
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I2fa883b443d0a4c77d62275faeacd1ed2c67a97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39493
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Reformat some lines of code
- Put names to all used MCHBAR registers
- Move MCHBAR registers into a separate file, for future expansion
- Rewrite several comments
- Use C-style comments for consistency
- Rewrite some hex constants
- Use HOST_BRIDGE instead of PCI_DEV(0, 0, 0)
Tested, it does not change the binary of Asrock B85M Pro4.
Change-Id: I926289304acb834f9b13cd7902801798f8ee478a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38434
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Volteer uses 4 bits (hardware straps) to indicate what memory
configuration the board is populated with (i.e. which SPD file
to use for the populated memory). This allows for only 16
different SPDs for supporting Volteer and all future variants of
Volteer. Currently, each memory chip needs its own SPD file, so we
can only support 16 different memory chip options for Volteer and
all of its variants.
Generic SPD files are just SPD files that have been stripped down
to contain only fields that are important for the memory controller
(strips out items like vendor info, for example). Using generic SPD
files allows for more than 16 different memory options given it's no
longer a 1-to-1 mapping as similar memory modules from different
vendors can share the same generic SPD file.
BUG=b:147857288
TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and
verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB
of memory.
Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add template files for making a new barebones-copy of Volteer.
BUG=b:147483699
BRANCH=None
TEST=N/A
Change-Id: I8cc69b8ce7dbc6809de058019bdc466a060069e7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Disable the BT module in bootblock and enable it in ramstage. This
allows for loading the BT firmware during reboot.
TEST=Build and boot the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update GPIO reset type from PLTRST to DEEP.
DEEP setting is more conservative for S3/S4/S5.
Detail information is bug.
BUG=b:151305120
TEST=Build and boot to OS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the ECPD (GOOG0003) device under CREC (GOOG0004) so that the ECPD AP
device drivers can access the parent EC device to communicate with the
EC. Also, update the Notify() call to reflect the new location of the
ECPD device.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Change-Id: I830b030c7a063506f50f9cd51df3a5018e248fc2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Provide settings for configuring the link between HD-Audio controller
and display unit for purposes of HDMI/DP Audio playback.
BUG=b:144708516, b:148385924
TEST=none
Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Early ec sync needs to be disabled for EFS2 to function.
BUG=b:151115320
BRANCH=none
TEST=none
Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
commit 7f9ceef disables TCO SMIs unless specifically enabled, so help
the linker throw out the function that handles them in that case.
Change-Id: Ia3c93b46e979fb8b99282875b188415f249d38dd
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Michael Niewöhner
Patrick Rudolph