Since coreboot is initializing uart for debug logs, fsp should not reinitialize it.
Thus we need to set FSP UPD to skip Uart init in FSP and use settings done by coreboot
BUG=None
BRANCH=None
TEST=FSP is able to push debug logs on UART with this setting
Cq-Depend: TBD
Change-Id: I0fda2ace3b1f63159e9809d6a3044a3bad452f07
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Skip sending MboxBiosCmdSxInfo for sleep states other than S3. The
PSP only acts on S3 and ignores all others. As a result, the command
register is not cleared upon return and coreboot reports a timeout.
BUG=b:153622879
TEST=Use halt from command line, verify command skipped.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ic47b8507e29e4c53898e88fb46e532b71df87d07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change drops the check for ENV_RAMSTAGE in mainboard_ec_init()
since it is included only in ramstage. Also, the content of
ramstage_ec_init() is moved into mainboard_ec_init().
Change-Id: I282fb07a80f4de6064a544f6dd58e8f973a597b9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43118
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_ec_init() does nothing in any stage other than ramstage. So,
this change drops the call to mainboard_ec_init() from
romstage.c. Additionally, it also drops ec.c from romstage and
verstage.
Change-Id: Iae0be4d678b0780cf532000a6c0fff1bce333c0e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops the function `variant_romstage_entry()` which is
unused on zork.
Change-Id: I140ab3e837971c4c7dbef5d27616043b5fc6c2c9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops codec.asl file from Chrome EC since it is now
unused.
Change-Id: I6c2f3e53b14aaf76b9c6d038a732e79a4d7bb2f1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43043
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops the inclusion of codec.asl in DSDT for `GOOG0013`
device and instead uses the newly added Chrome EC audio codec driver
for filling in the device node in SSDT.
TEST=Verified that following node gets generated:
Scope (\_SB.PCI0.LPCB.EC0.CREC)
{
Device (ECA0)
{
Name (_HID, "GOOG0013") // _HID: Hardware ID
Name (_UID, One) // _UID: Unique ID
Name (_DDN, "Cros EC audio codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Change-Id: I3e626ce01a3735ac2c966c0e95310be4c828b241
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43042
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds driver for audio codec device (HID `GOOG0013`) living
behind Chrome EC. This driver generates the required ACPI node for the
codec device. In a later change, GOOG0013 device will be dropped
the .asl file.
Change-Id: Ib2759eac60265ef81df70af1d4f1f72bd9d987e8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43041
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change moves `if EC_GOOGLE_CHROMEEC` from chromeec/Kconfig to
chromeec/i2c_tunnel/Kconfig. This is done to make it clear that the
Kconfig file in i2c_tunnel is sourced unconditionally, but the configs
in i2c_tunnel/Kconfig are conditionally defined based on the
evaluation of if condition.
This change addressed the feedback received on
https://review.coreboot.org/c/coreboot/+/40515/11/src/ec/google/chromeec/Kconfig#200.
Change-Id: I66cd91d6b1813ff6d0fb7be719e2da65ac6ac23b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43040
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change drops H1_PCH_INT macro for GPIO_9 since it is the same
across all variants. Also, the name differed from the schematics
version `H1_PCH_INT_ODL` creating confusion.
Change-Id: I7b038426a984d8abc460a0da3ee1dc5559d7ad5f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
No x86 mainboard has a reset.c file.
Change-Id: I167629c7addf485944926d57cf0228606c0f32e5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42582
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With devicetree listing drivers/pc80/tpm, it is compulsory
to have the corresponding driver included in the build.
Followup work will drop the associated weak function
declaration that util/sconfig currently generates.
Change-Id: Ife8deb2c973ab7c7b820244b6f72efd3b56570ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43047
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix integer with different size to pointer conversion on x86_64.
Change-Id: Ic06a32d549b694310f4c724246f28fed15acf83f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42983
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For historical reasons, Windows has issues with certain names being
used for files and directories, 'con' or 'CON' being one of
them. Therefore, rename the pmc_mux/con driver to pmc_mux/conn in
order to work around this issue.
TEST=built volteer (only user of this driver as of now)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia78dc4efe647c96a7169a3b95fc3b8944d052c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Currently, the certain postcode values aren't in increasing
order of values.
The change, just reorganzies the defines in increasing order
of the values
Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net>
Change-Id: Id5f0ddc4593f689829ab9a7fdeebd5f66939bf79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
It implements the SMBIOS IPMI FRU mapping table defined in
https://www.opencompute.org/documents/facebook-xeon-motherboard-v31
22.3 SMBIOS FRU mapping table.
Mainboard needs to configure the correct values for FRU_DEVICE_ID and BMC_KCS_BASE.
For type 11 string 1 to 6 are common and implemented in this driver, the
rest are project dependent and can be added in the mainboard code.
Tested on OCP Tioga Pass.
Change-Id: I08c958dfad83216cd12545760a19d205efc2515b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40308
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix a typo to use CONFIG_DISPLAY_HOBS instead of CONFIG_DISPLAY_HOB.
Build hob display into romstage, in addition to ramstage.
Memory map HOB data is a big structure. Update the soc_display_memmap_hob()
to assist trouble shooting of FSP interface.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iece745fe21d11b4a470ba8318201bb6e68c5da26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42841
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested on OCP Delta Lake.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I1e6e2bd25cbe3b0c0547dda9e457c4d55df28388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42428
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are 4 slots in YV3, Location In Chassis should be 1~4.
Tested=on OCP Delta Lake, dmidecode -t 2 verified the string is correct.
Change-Id: I3b65ecc6f6421d85d1cb890c522be4787362a01b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Refer to section 7.9 Port Connector Information of DSP0134_3.3.0
to add type 8 data, the table of data should be ported according
to platform design and MB silkscreen.
Change-Id: I81e25d27c9c6717750edf1d547e5f4cfb8f1da14
Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a new LB_TAG_PLATFORM_BLOB_VERSION for FSP version, it would
add Intel FSP version to coreboot table LB_TAG_PLATFORM_BLOB_VERSION
when PLATFORM_USES_FSP2_0 is selected.
Tested=On OCP Delta Lake, with an updated LinuxBoot payload cbmem utility
can see "LB_TAG_PLATFORM_BLOB_VERSION": "2.1-0.0.1.120"
Change-Id: I92a13ca91b9f66a7517cfd6784f3f692ff34e765
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Replace uses with MAINBOARD_HAS_LPC_TPM, if drivers/pc80/tpm
is present in devicetree.cb it is necessary to always include
the driver in the build.
Change-Id: I9ab921ab70f7b527a52fbf5f775aa063d9a706ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
1. Populate SMBIOS data from OCP_DMI driver read from FRU and PPIN MSR
for OEM string 1 to 6, add string 8 for PCIE configuration.
2. Set the read PPIN MSR to BMC.
Tested on OCP Delta Lake.
Change-Id: I9127cf5da1c56d8012694d070615aec24cc22fdf
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41279
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP Tioga Pass and Delta Lake.
Change-Id: I8c2eac055a065c06859a3cb7b48ed59f15ae2fc4
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42901
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's necessary to run IPMI commands in romstage for writing error SEL
such as memory initialization error SEL, and also for other usages
such as starting FRB2 timer, OEM commands, etc.
Add CONFIG_BMC_KCS_BASE for BMC KCS port address that can be used
across romstage and ramstage.
Change-Id: Ie3198965670454b123e570f9056673fdf515f52b
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40234
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A UPD HybridStorageMode allows a platform to dynamically configure the
PCIe strap configuration required if an Optane device is connected.
The strap configuration is done by HECI commands between FSP and CSE to
override the default PCIe strap value, and the updated strap value is
stored in SPI RW data to be used on the next boot.
CSE Lite supports the strap override when running on CSE RW partition,
while CSE RO partition does not support it because CSE RO is not allowed
to access SPI RW data. The strap override failure on CSE RO causes FSP
not initializing PCH Clkreq and PCIe port mapping and this results NVMe
and Optane initialization failure.
By disabling HybridStorageMode in case of CSE RO boot, NVMe detection is
done by the default PCIe configuration and Optane is detected as a
single NVMe storage device on CSE RO boot in recovery mode. Both NVMe
and Optane devices detection as well as OS installation to these storage
devices are verified on CSE RO boot in recovery mode.
BUG=b:158643194
TEST=boot and verified with tglrvp and volteer in recovery mode
Cq-Depend: chrome-internal:3100721
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I5397cfc007069debe3701bf1e38e81bd17a29f0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42282
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id c531000f:
2020-05-18 20:55:55 +0000 - (vboot: Add recovery reason code for CSE Lite SKU errors)
to commit id 68de90c7:
2020-07-02 11:31:05 +0000 - (Allow building for non-CrOS environments)
This brings in 59 new commits.
Change-Id: I7f3c30511ff4acc60e3581bdab89d685dc7beaa5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43008
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The eSPI polarity macros were reversed. Those are fixed so adjust
the corresponding values related to the correct expectations of
the IRQ path: eSPI virtual wire IRQs are active level high. The EC
sends active level high virtual wire IRQs. The default interrupt
encodings in ACPI for P2/S devices are active edge high. Therefore,
there is no need to override anything.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia28d82cd9e432df98839f68bac4eae4447455e53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
eSPI interrupts are active level high. The eSPI polarity register
in the chipset inverts incoming signals if the corresonding bit
is 0 in the register. Therefore, all active high (edge or level)
virtual wire interrupts need to ensure they are not inverted.
And really the sender of the interrupts should be conforming to the
the eSPI spec. As such inverting any signals should not be necessary,
but this register in the chipset allows for fixing up those misbehaviors.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Time Window Tau bits are only supported by Comet Lake/Cannon Lake
onwards, so skip setting those bits for earlier SoCs.
Change-Id: Iff899ee8280a9b9bbcea57d4e98b92d5410be21d
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
V.2: Spare USB routed internally to another peripheral and so
no plug event hook needed.
BUG=b:1603699358,b:157479891
BRANCH=none
TEST=none
Change-Id: Ideacac417a46b96f3e82b53bbb341ecce79ee420
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42994
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Maulik V Vaghela