Boot-tested by Paweł Stawicki <stawel@gmail.com>.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Paweł Stawicki <stawel@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4820 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
VGA ROM can not run. After make, run
> ./cbfs/cbfstool ./coreboot.rom add ../vga_bios.rom pci1002,791f.rom optionrom
to make the final image with vga bios.
The macro vga_rom_address is out-of-date when CBFS starts play its role. it also should
be eliminated from rs690/chip.h as below. But it will cause building error on other board, which I
cant make test on.
## Index: src/southbridge/amd/rs690/chip.h
## ===================================================================
## --- src/southbridge/amd/rs690/chip.h (revision 4782)
## +++ src/southbridge/amd/rs690/chip.h (working copy)
## @@ -23,7 +23,6 @@
## /* Member variables are defined in Config.lb. */
## struct southbridge_amd_rs690_config
## {
## - u32 vga_rom_address; /* The location that the VGA rom has been appened. */
## u8 gpp_configuration; /* The configuration of General Purpose Port, A/B/C/D/E. */
## u8 port_enable; /* Which port is enabled? GFX(2,3), GPP(4,5,6,7) */
## u8 gfx_dev2_dev3; /* for GFX Core initialization REFCLK_SEL */
##
Don't apply above patch about rs690/chip.h before every board has been fixed.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's an embedded AMD 690/SB600 mainboard with a Mobile Sempron CPU.
Issues with this port:
- hangs early during "Starting Windows" with Windows 7, after loading all the
drivers
- sound is untested and probably not working
- powernow seems to be not working
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4764 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
variables being set incorrectly.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4747 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and PIRQ tables were actually wrong, I cannot imagine they ever
worked properly.
- Use CONFIG_IRQ_TABLE_COUNT in all irq_tables.c files instead of
hard-coded numbers.
- Make all CONFIG_IRQ_TABLE_COUNT values in irq_tables.c match Options.lb.
- Make all CONFIG_IRQ_TABLE_COUNT values match the actual number of entries
in the irq_tables.c file.
- Set all CONFIG_IRQ_SLOT_COUNT values in src/.../Options.lb for those
boards where they were set to 0 (in order to be overridden in
the respective targets/.../Config.lb).
This is mainly done to aid Patrick's scripts for kconfig conversion.
- Fix a number of comments in irq_tables.c files.
- Drop CONFIG_IRQ_SLOT_COUNT usage from boards that don't have irq_tables.c:
- tyan/s1846
- asus/a8v-e_se
- asus/m2v-mx_se
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4739 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Both were only really used in pre-cbfs, as the payload's size isn't
relevant for the build process anymore.
Various calculations in {no,}failovercalculation.lb are adapted
accordingly.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- CONFIG_CBFS
- anything that's conditional on CONFIG_CBFS == 0
- files that were only included for CONFIG_CBFS == 0
In particular:
- elfboot
- stream boot code
- mini-filo and filesystems (depends on stream boot code)
After this commit, there is no way to build an image that is not using
CBFS anymore.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
fam10 and h8dmr k8 targets.
Many, many thanks to Marc, Myles, Patrick and Stepan for all their help with
this, and to Arne for doing the s2912 fam10 port.
Build and boot tested. Abuild tested.
There are a number of outstanding issues and caveats - see src/mainboard/supermicro/h8dmr_fam10/README.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4693 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
kconfig_s2892.dif: Add support for Tyan s2891, s2892, and s2895 to Kconfig.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4656 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
let it build.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4636 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This patch tries to improve the pcie portA configuration.
The Matrox G550e PCIe gfx card shipped along with the dev board is supported.
Signed-off-by: Arnaud Maye <arnaud.maye@4dsp.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4615 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
CONFIG_FALLBACK_SIZE should be equal to CONFIG_ROM_IMAGE_SIZE and not
CONFIG_ROM_SIZE
Signed-off-by: Arnaud Maye <arnaud.maye@4dsp.com>
Acked-by: Cristi Magherusan <cristi.magherusan@net.utcluj.ro>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4605 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, if there's only one image, it should be named "fallback", not "normal".
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4600 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Thanks to Carl-Daniel for finding this.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4592 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Thanks to Stefan for providing the original fix for amd/dbm690t
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4590 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Trivial change
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4555 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Works on Kontron, qemu, and serengeti.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
tested on abuild only.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
and we will fix issues as they appear.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
i810 chipset. Not all hardware has been tested, but my test PC boots Linux
(via FILO) without any problems.
Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).
In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:
Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c (Revision 4393)
+++ src/devices/pci_rom.c (Arbeitskopie)
@@ -87,7 +87,7 @@
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
rom_data->vendor, rom_data->device);
- return NULL;
+ // return NULL;
}
printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n",
The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...
Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb.
Importantly, this also sets
default CONFIG_AP_CODE_IN_CAR=0
in
src/mainboard/supermicro/h8dmr/Options.lb
which is required to make this box boot since the changes that went in in
r4315.
At Myles' suggestion, this patch also sets
default CONFIG_USE_FAILOVER_IMAGE=0
default CONFIG_USE_FALLBACK_IMAGE=0
default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
in src/mainboard/supermicro/h8dmr/Options.lb to simplify
targets/supermicro/h8dmr/Config.lb a bit further.
Build tested with abuild, boot tested on physical hardware.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.
Patch should work against r4381 (or later ?)
This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)
The coreboot_table issue seems to have been automagically resolved by
the latest core files.
It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
It's basically done with the following script and some manual fixup:
VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Note that this board is nowhere near usable, further patches will follow
and hopefully get this into buildable and usable shape.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4376 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots
Linux fine. Detailed status at:
http://www.coreboot.org/Soyo_SY-6BA_Plus_III
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range:
[0x00000000000f0000, 0x0000000000100000)
Ram areas
[0x0000000000000000, 0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000) RAM
[0x0000000000100000, 0x000000000fff0000) RAM
[0x000000000fff0000, 0x0000000010000000) Reserved
SELFBOOT RETURNED!
Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024);
+ ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
ways superior to v3, while lacking its completeness. But, one nice
thing: no more included .S or .c files. It's all separate compilation.
That should allow our Makefiles to work much better.
Note that the current non-CAR implementation is the default and
continues to work (tested FILO boot to Linux on both CAR and non-CAR).
Index: src/mainboard/emulation/qemu-x86/Config.lb
Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that
depend on this variable are grouped in one if, and the other parts
(romcc etc.) are in the else. This change is a model of how we should be
able to do other motherboards.
Index: src/mainboard/emulation/qemu-x86/Options.lb
add needed options.
Index: src/mainboard/emulation/qemu-x86/failover.c
remove code inclusion from this not-yet-used file.
Index: src/mainboard/emulation/qemu-x86/rom.c
This is the entry point for the rom-based code. Called stage1.c in v3.
Index: src/lib/Config.lb
change initobject to a .o from a .c; this fixed a build problem.
Index: src/pc80/serial.c
make uart_init non-static.
Index: src/pc80/Config.lb
add initobject
Index: src/arch/i386/init/entry.S
Entry point. Unify a bunch of files that were fiddly lttle includes. From v3.
Index: src/arch/i386/init/ldscript.ld
new file. The goal is to hang all init changes for CAR here, to minimize other changes to any
other ldscript. Besides, putting this in init makes sense; entry and car are manage init.
Index: src/arch/i386/init/car.S
generic i386 car code from v3.
Index: src/arch/i386/init/ldscript_fallback_cbfs.lb
Fix what looks like a bug: this was not including the init.text section.
Index: targets/emulation/qemu-x86/Config.lb
push up the console loglevel. qemu is for debugging so we might as well
get all the debugging we can.
Index: targets/emulation/qemu-x86/Config-car.lb
For CAR bullds.
Signed-off-by: Ronald G. minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.
This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.
Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
as it's done everywhere else
- change the default config of abuild to not
provide ROM_IMAGE_SIZE values for the images
in a CBFS configuration
- change abuild's crosscompile autodetection to
not try to use "i386-elf-i386-elf-gcc" (which
is bogus)
Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS
The changes in util/abuild/abuild are trivial and
abuild tested.
As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4325 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4324 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
reduce the size of the bootblock (done for kontron/986lcd-m)
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Vincent Lim <vincent.lim@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4289 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
I would like to remind you that this firmware enables the hardware
virtualization on the AMD cpu's on the machine. That feature was
explicitly disabled by the factory BIOS.
Due to an error in the VGAROM no other rom loader (YABEL or X*^BIOS)
than SeaBIOS manages to load the VGA rom. The VGA ROM tries to read
config space of a device that is actually not present.
Because SeaBIOS does not support AHCI SATA it can not start the
bootable drive of the machine so i had to add filo to seabios to
manage booting:
./cbfstool coreboot.rom add-payload filo.elf img/FILO
Signed-off-by: Samuel Verstraete <samuel.verstraete@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Uwe Hermann