Enable PSP_S0I3_RESUME_VERSTAGE for all guybrush based boards. This will
cause verstage to run during s0i3 resume. The TPM will be reinitialized
in verstage during s0i3 resume. This is necessary on guybrush boards
because the TPM_RST_L pin is asserted by the SOC in S0i3.
BUG=b:200578885
BRANCH=None
TEST=TPM initialized after s0i3
Change-Id: I9d64fe92ffc67a421be6d5e013e636332ce86dd5
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Build-test the configuration Prodrive uses to build coreboot for their
Hermes mainboard.
Change-Id: I62e79d3143851bf14dfdbe70e60c60f13dd06c3f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com>
Crashlog has error records and PMC reset records two parts. When we
send ipc cmd "PMC_IPC_CMD_ID_CRASHLOG_ON_RESET", PMC reset record is
enabled. At each warm/cold/global reset, crashlog would be triggered.
The cause of this crash would be "TRIGGER_ON_ALL_RESETS", it is used to
catch unknown reset reason. At the same time, we would see [Hardware
Error] in the kernel log.
If we default enable TRIGGER_ON_ALL_RESETS, we would have too many false
alarm. Now we disable PMC reset records part by default. And we could
enable it when we need it for the debug purpose.
The generated bert dump is under /var/spool/crash/, we could check this
path to verify this CONFIG disable/enable status.
BUG=b:202737385
TEST=No new bert dump after a warm reset.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I3ec4ff3c8a3799156de030f4556fe6ce61305139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
When compiling libpayload using x86_64 toolchain for ARCH_MOCK compiler
reports an error about gerring address of packed member. Until now it
had to be disabled by passing -Wno-address-of-packed-member to
EXTRA_CFLAGS. This patch disables this warning.
Change-Id: I9a948fabe66f7297632ecaca8ec1bfa5c842b750
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
None of the touchscreens used in the brya program (any brya board)
should require exporting of GPIOs in the ACPI _CRS method for any i2c
device. This can cause i2c devices to malfunction or cause timing
sequence violations if:
1) ACPI exports a PowerResource for the device that uses GPIOs that are
also exported in _CRS
2) The kernel driver for the device uses the GPIOs exported in _CRS for
its own purposes. This means the state of the pin is out of sync
between platform firmware and the kernel. The Linux ELAN I2C
touchcsreen driver (https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/upstream/drivers/input/touchscreen/elants_i2c.c;l=1429)
is one example of this.
Therefore, add disable_gpio_export_in_crs to all brya variants that use
the drivers/i2c/generic or drivers/i2c/hid chip drivers.
Change-Id: Ib4475bd0dc885e230911de6298fd95baa868ef29
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
- Because primus have five sensors,we need to define 5 sensors.
BUG=b:200836803
TEST=USE="project_primus emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: I02fb8eee644f9999d9c5d48e3a056499d968f85d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
We experienced the `Cr50 i2c TPM IRQ timeout!` error when the device
executed the reboot test even though we have updated the Cr50 firmware
to the latest version 0.6.70. Besides, we also experienced the device
failed with the IRQ timeout when using the 0.3.22 Cr50 firmware in the
factory. In order to fix these issues, we disable the gpio power
management from the devicetree.
BUG=b:210540890
TEST=reboot 100 cycles without the error message.
Change-Id: I5f18fea5bc28493107c6d4951805de640a0b8ae5
Signed-off-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Use enum cb_err as return type of all remaining functions that only
return success or failure.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6cff8480d99641fdfb613bb3e4edc4055ad5efc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Use enum cb_err as return type of all functions that aren't exposed
outside of this compilation unit. The checks if a function has returned
a failure are replaced with checks if the return value isn't CB_SUCCESS
which is equivalent if only those two values are used, but also detects
a failure if any unexpected value would be returned.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If8c703f62babac31948d0878e91bd31b31bebc01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The intermediate ret variable isn't needed. espi_open_generic_io_window
only returns 0 or -1, so if ret is != 0, it has to be -1. This is a
preparation to use the enum cb_err type for the return values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6c7f4cedf8c2defadcf4c4da1697a97c7b401f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
S0i3 is a low power state which reduces the power consumption to about
the level of the S3 suspend state where the DRAM is kept in a self-
refresh state and most of the rest of the system is powered down. So
everything that can be switched off in the S0i3 state should be switched
off in order to maximize the standby time.
BUG=b:210722314
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If445f5825dc7b795c95d73c061156cc485421ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The AOAC device states shouldn't be stored in GNVS, but be read from the
AOAC registers during runtime. Same for the EHCI controller's BAR0. The
location and size of the XHCI firmware can either be statically
determined at build-time or have coreboot generate ACPI objects that
contain the needed addresses. Since I can't easily test changes that
require booting to a desktop on Stoneyridge at the moment, only add
TODOs for now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I3691b05606b9430cb60923780a6131993a9887d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Split the southbridge code into a bootblock and a ramstage part to align
it more with Picasso and Cezanne. Also move the implementation of
fch_clk_output_48Mhz to the end of early_fch.c since it's not really
related to the functions that were previously around it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib660fbef8dc25ba0fab803ccd82b3408878d1588
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Split the code that gets called from the AGESA wrapper from the rest of
the FCH/southbridge code that directly interacts with the hardware.
Since the remaining parts of southbridge.c aren't used in romstage,
drop it from the list of build targets for romstage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6197add0e1396a82545735653110e1e17bf9c303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Factor out enable_aoac_devices out of southbridge.c to aoac.c to align
Stoneyridge more with Picasso and Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied4d821138507639cad1794f6c5017b5873b761f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Introduce and use an enum for the `power_profile` CMOS option. Add a
helper function that converts CMOS values into enum values. Using an
enum allows GCC to warn about switch statements using enum types for
their control expressions not handling all possible enum values, and
also improves readability.
Change-Id: I47a453ea12d164d26908a9944a89a481757e753c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Rename `mainboard.c` to `smbios.c` as it only contains SMBIOS functions.
Rename `ramstage.c` to `mainboard.c` as it contains the mainboard chip
operations struct.
Change-Id: I9548ca72a7583de98f5b154e3381825bba00d5cf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We shouldn't be providing -I include paths to the root of the soc
specific directory. It allows for lazy includes that can collide,
but there's no way of knowing the winning path since the winning
path is determined by Makefile.inc parsing order.
This is taken from CB:41355
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45ed219e4e0cccf3d4f04cc70dc1ef77c518afff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is taken from CB:41355
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iba1948ae2332788b7e0ec9b4e3cea35c6608b152
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is taken from CB:41355
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I10a18efb92ac0c3cad31044156e32aa6afe1d4d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These boards program the early GPIO table in bootblock, not romstage.
Change-Id: Iae9353d106483f30cefa2d035d96e63e4c127261
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Sean Rhodes <admin@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Update the parameter types of `intel_me_status()` to not be pointers.
Change-Id: I0fd577c49bec7a581c340fc2fcadcadd50b1a638
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Change the signature of MEI CSR functions to reduce pointer usage.
Change-Id: I1e4885daf8b3e11056421e663e67c8f360699a98
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Wrap bitfield structs in unions to reduce pointer usage. This adds more
uses of the `mei_dump()` function, only used for debugging. Refactoring
the MEI CSR functions to not use pointers is done in a follow-up.
Change-Id: I4defbb8c0e7812bf95c672ce529959f67c34537a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There's no need to use typedefs for enum types. Get rid of it.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I830d95018b33fe6ab7e2c37ebf15bb1df6ceec38
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
There's no need to use typedefs for struct types. Get rid of them.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I109bd690500a9f03b9da0fd72044be79abf660d3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59619
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The RTC on Cezanne is an unstable wake source when the system is in
S0i3. We instead need to use an internal timer that triggers a GPIO that
acts as a wake source. This change provides the ACPI necessary to allow
the OS to manage the wake source.
BUG=b:209705576
TEST=Boot guybrush with this patch and several OS patches. Verified the
OS sets the correct wake bit, the system correctly suspends
and resumes, and the wake source is correctly accounted for.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1f14d14df5d30d48d244416f2ec8c10ac5c8040e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
We want ACPI to own the GPIOs. This will stop the GPIOs from being
exposed to the OS driver.
BUG=b:209705576, b:210694108
TEST=Dump ACPI table and verify GPIO are no longer in _CRS.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8d2af41e1d04b98f0e3e19a95d7b91d08ecdf17b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Both the Picasso PPR #55570 Rev 3.18 and the Cezanne PPR #56569 Rev 3.03
define bit 9 of the PM_RST_STATUS register as internal Thermal Trip
reset status bit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ida8b13fe62b16c18fc9924520b83220e73eca624
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Use the `popcnt()` helper instead of manually counting the number of set
bits in the first `CONFIG_MAX_CPUS` bits with a loop. Also, use unsigned
types to store the number of active/total cores.
Change-Id: Iae6b16991fcf07c9ad67d2b737e490212b8deedd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Setup eSPI to dedicated alert per the latest schematic changes.
DUT won't hang up at power on boot due to eSPI alert is triggerred
unexpectedly.
BUG=b:199458949,b:203446084
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
test power on/reboot on DUT (6 units) each 10 loops->pass
Change-Id: I55cda7a1af22e555a4f55285cb7e337a69e6c234
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Felwinter has non-stylus sku. Add a FW_CONFIG field to indicate
stylus presence and add a probe statement to the devicetree for the
corresponding device.
BUG=b:208937710
TEST=non-stylus doesn't register garage driver.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I06a2c125f2b5a73f9f7c27bf1b20ff8712664809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Address Mode 0: Physical Address, bit 63~56: 0x00
Address Mode 1: Relative Address to entire BIOS image, bit 63~56: 0x40
Address Mode 2: Relative Address to PSP/BIOS directory, bit 63~56: 0x80
Address Mode 3: Relative Address to slot N, bit 63~56: 0xC0
It is the expanding mode for simple relative address mode, for which
address_mode equals 1.
Only mode 2 is added. We need to record current table base address and
calculate the offset. The ctx.current_table is zero outside the
table. When it goes into the function to integrate the table, it
should backup the old value and get current table base. Before it goes
out the function, it should restore the value.
If the table address mode is 2, the address in each entry should be
also add address mode information. If not, the address mode in entry
is meanless.
The old mode 0,1 should be back compatible.
Change-Id: I29a03f4381cd0507e2b2e3b359111e3375a73de1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Felix Singer