This patch makes DISABLE_HECI1_AT_PRE_BOOT=y default for Cannon Lake
and ensures disable_heci1() is guarded against this config.
Also, makes dt CSE PCI device `on` by default.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idd57d2713fe83de5fb93e399734414ca99977d0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This reverts commit bcd7873ea8.
Reason for revert: It makes beadrix can't boot to os without depthcharge change. The depthcharge change related with fw_config and will effect other variants.
================ error log ================
...
Starting depthcharge on Beadrix...
src/vboot/util/flag.c:50 flag_install(): Gpio already set up for flag 5.
===========================================
BUG=b:204882915
BRANCH=None
TEST=Build and boot into OS.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Id5e76fc78a56d30caf9f805a8a430f176a653bbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60849
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change adds memory part used by variant beadrix to
mem_part_used.txt and generates DRAM ID allocated to the part.
BUG=b:204882915, b:210123929
BRANCH=None
TEST=Run part_id_gen to generate SPD id
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibff150bb4e742f32641da661cfca6594d18c52e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60242
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Pre-bootblock stages (i.e., VBOOT_STARTS_BEFORE_BOOTBLOCK) might not
have the ability to log to the UART, so their console messages are
inaccessible until the boot processes gets into the payload or OS.
This makes it difficult to debug verstage.
This feature will dump the pre-bootblock CBMEM console immediately
after the bootblock console is initialized. I chose to do this in
console_init instead of bootblock_soc_init because I wanted to have the
pre-bootblock contents dumped before the coreboot bootblock starting
message is printed.
BUG=b:213828947
TEST=Boot guybrush with PSP verstage and verify verstage logs are dumped
to the UART.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I363c93ef3ee6c5c303a6a68f88a622e2aa62594c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61012
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function is similar to cbmem_dump_console_to_uart except it uses
the normally configured consoles. A console_paused flag was added to
prevent the cbmem console from writing to itself.
BUG=b:213828947
TEST=Boot guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3fe0f666e2e15c88b4568377923ad447c3ecf27e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
I2C bus and address of the TPM are typically fixed on hardware so
there is no need to be able to configure this in menuconfig.
Change-Id: I1b6afa68fe753fb76348e0461209d218b14df7cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Unknown if yabel works for X86_64 but now it builds.
Change-Id: Iacdb9fde91a992b5010120f5824383ca4aebdd1a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch checks if CSE's spi protection mode is protected or
unprotected. Returns true if CSE's spi protection mode is protected,
otherwise false.
BUG=b:211954778
TEST=Able to build and boot brya with this change. Calling
`cse_is_hfs1_spi_protected()` in coreboot is able to provide
the SPI protection status.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I23f1a1c4b55d8da6e6fd0cf84bef86f49ce80cca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
3. Make dt CSE PCI device `on` by default.
4. Mainboards set DISABLE_HECI1_AT_PRE_BOOT=y to make Heci1
function disable at pre-boot instead of the dt policy that uses
`HeciEnabled = 0`.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5c13fe4a78be44403a81c28b1676aecc26c58607
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The existing Sideband access is with the PCH P2SB. There will be future
platforms which access the TCSS registers through SBI other than the PCH
P2SB. This change abstracts the SBI with common API.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ia6201762fe92801ce6b4ed97d0eac23ac71ccd37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change adds the Primary to Sideband Bridge(B0, D31, F1)
definition for the platform in order to maintain the common block
API build.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I1c4ddfce6cc6e41b2c63f99990d105b4bbb6f175
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Each time the spinlock is acquired a byte is decreased and then the
sign of the byte is checked. If there are more than 128 cores the sign
check will overflow. An easy fix is to increase the word size of the
spinlock acquiring and releasing.
TEST: See that serialized SMM relocation is still serialized on
systems with >128 cores.
Change-Id: I76afaa60669335090743d99381280e74aa9fb5b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60539
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
New CBFS API uses commonlib/bsd/cbfs_serialized.h, which includes
vboot's vb2_sha.h. And, because vboot's includes are not available
in libpayload's installation directory nor in lpgcc paths, it was
causing compilation errors. This patch fixes this issue.
lpgcc will look for `vboot` directory like it is doing for `include`
directory to create correct paths. However, if payload will be built
using libpayload's build dir as a base, then vboot headers from
3rdparty/vboot will be used, as there is no way to pass VBOOT_SOURCE
from makefile to lpgcc.
Moreover, this patch moves VBOOT_SOURCE to the main Makefile to
make it available for installation target, to install headers from
vboot directory provided by caller.
Change-Id: I68dd7e1545cfcaf24547d8a9fe289447c79da222
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reported-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This also uncouples cbfstool from being overly Chromium
specific. However the main objective is to not subprocess
flashrom any more and instead use the programmatic API.
BUG=b:207808292
TEST=built and ran `elogtool (list|clear|add 0x16 C0FFEE)`.
Change-Id: I79df2934b9b0492a554a4fecdd533a0abe1df231
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Adding this host event to the EC SCI event and wake masks allows
the system to generate an SCI and/or wake when this event happens.
BUG=b:206012072
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I4f48244a4fca750a9de2ecc20f24786034d45b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The redrix thermal team has determined that the TCC circuit trip
temperature should be set to 97C, therefore, because the offset
is subtracted from 100C, set the `tcc_offset` register in the
devicetree to 3.
BUG=b:200134784
TEST=build and verified by thermal team
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: Ifb63d63bc741b2a402328f256b43bc83e0a88a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The anahera thermal team has determined that the TCC circuit trip
temperature should be set to 97C, therefore, because the offset
is subtracted from 100C, set the `tcc_offset` register in the
devicetree to 3.
BUG=b:214088543
TEST=build and verified by thermal team
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I25b8a3d9e5fe28e9497b735c50a09994092b2243
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
After kernel change landed on Chromium tree.
https://lore.kernel.org/r/20210407065555.88110-5-heikki.krogerus@linux.intel.com
USB driver will use PLD to match the Type-C port. PLD needs to start
from 1.
BUG=b:214460183
TEST=boot into OS without kernel panic.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1493e46f8881b2f688f41f32755d4cf5a87e7656
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This patch applies clang-format settings to most of tests files. Some
files were fixed "by-hand" to exclude some lines, which whould be less
readable after automatic style fixing.
Moreover, some comments (mostly in tests/lib/edid-test.c) were adjusted
to match coreboot coding style guidelines.
Change-Id: I69f25a7b6d8265800c731754e2fbb2255f482134
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
https://github.com/thesofproject/linux/pull/3271
Felwinter will use the OEM string for SOF tplg loading. Update the name
that match to the kernel driver.
BUG=b:210061842
TEST=dmidecode can show AUDIO_AMP-MAX98360_ALC5682VS_I2S_2WAY.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ib6114d047762ba26071c9cdc6c43d80f933c1eb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61070
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DDR interfaces emit electromagnetic radiation which can couple to the
antennas of various radios that are integrated in the system, and cause
radio frequency interference (RFI). The DDR Radio Frequency Interference
Mitigation (DDR RFIM) feature is primarily aimed at resolving narrowband
RFI from DDR4/5 and LPDDR4/5 technologies for the Wi-Fi high and
ultra-high bands (~5-7 GHz). This patch sets CnviDdrRfim UPD and enables
CNVI DDR RFIM feature for brya0 variant.
Refer to Intel doc:640438 and doc:690608 for more details.
BUG=b:201724512
BRANCH=None
TEST=Build and boot with debug FSP and verify CnviDdrRfim UPD value.
Change-Id: I6ad826d0039e400f219c2d407c51762c1751a909
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
ADL support USB4/TBT. Select it will reserve PCI buses and hotplug mem
and prefetch mem.
BUG=b:206739931
TEST=build PASS.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I1171981c1318c2ecb65ba7959c4de9b5e179514e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60885
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The goal when adding the new CBFS API in CB:59497 was that the old CBFS
code would be left completely untouched and just moved to the side a
bit, so that it could continue to work for the payloads that use it
until they all have time to transition to the new CBFS API.
Unfortunately, between the different iterations of the patch something
went wrong with that and the final committed version of cbfs_legacy.c
does differ in some parts from the original code, including a changed
macro definition that breaks decompression support. This patch restores
all the legacy CBFS files to exactly what they used to be (other than
the necessary changes in cbfs_core.h to avoid double definition
clashes).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic7fd428acb03d3830f66f807cd1d7cdbd652f409
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib9fb554c8f3cfd1e91bbcd1977905e1321db0802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a81fd58df468e2711108a3243bf116e02986316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
CBFS_VERIFICATION was depending on the VBOOT instead of on VBOOT_LIB,
which made enabling CBFS_VERIFICATION impossible. VBOOT is not
available, like in the main coreboot, but is was changed to VBOOT_LIB,
and was not correctly adjusted in patch instroducing CBFS_VERIFICAITON
option.
Change-Id: Ie23bad5f0ed3faf17a2ed7a3ad99310ee803edd2
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The call to genbuild_h needs to happen after xcompile is imported so
that genbuid_h can use iasl as chosen by xcompile. Move the entire
section down to keep things together.
TEST=no more error that util/crossgcc/xgcc/bin/iasl isn't found.
Change-Id: Ia7afd32bd120e5405e65825144b0c30d69931a22
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
verstage_mainboard_espi_init in mb/guybrush/verstage.c still accesses
some of the registers directly.
BUG=b:183149183
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2f48d1c62b48866d8d942f1586bcb72017b8dd72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add the UPD PcieRpSlotImplemented as devicetree option. To keep the PI
bit set for any slots of already existing boards, add set the option
PcieRpSlotImplemented=1 where appropriate.
Change-Id: Ia6f685df3c22c74ae764693329a69817bf3cd01d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make use of the helper introduced in the parent change to deduplicate
the PCIe root port table.
Change-Id: I2dae4e4caf0a7ba3662889f3b31da0c3c299bc92
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Add TGL-H support for the recently introduced code for differentiating
CPU and PCH root ports by adding the missing TGL-H port map.
Change-Id: Id2911cddeb97d6c164662e2bef4fdeece10332a8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The patch adjusts CSE region's internal partitions' (CSE RO and Data
partition) sizes to match with sizes of MFIT generated CSE Region's
internal partitions.
BUG=b:213993778
TEST=Generate coreboot for Brya and verify with MFIT generated
coreboot.
Cq-Depend: chrome-internal:4452789
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I5418c02f83134814e3f9959ee8c8da32ce8c7bec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60951
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures all brya variants with Alder Lake ESx SoC
are using NEM by default for CAR set up.
Default CAR configuration for QS SoC is eNEM.
BUG=b:168820083
TEST=Able to build and boot brya0 variant using eNEM mode.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib04bec188bdfde67c408fcd6b0603a5c2fb0fc97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
This patch documents the recommendation as per Intel GPIO BWG on
GPIO PAD lock configuration.
As per GPIO BWG, it's recommended to change the Pad Reset Config
for lock GPP as `Power Good` so that pad configuration and lock
bit can be reset at the same time.
Refer to Intel doc:630603 for details.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3faf5dfc28c8c2dbc322db80a59f44a29002673c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Since we need the GPIO defines in the devicetree settings, include
gpio.h in each SoC's chip.h file which will indirectly include the
soc-specific soc/gpio.h header instead of having it indirectly included
via soc/i2c.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id26721a6b8ae94784d4a90d7ccac28fef2be36dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The headers added are generated as per FSP v2511_04
Previous FSP version was v2471_02
Changes include:
- UPDs description update in FspsUpd.h and FspmUpd.h
- Adjust UPD Offset in FspmUpd.h
- Name change of UPDs in FspmUpd.h and FspsUpd.h
- Copyright year is updated in FspmUpd.h and FspsUpd.h
- Updated spd_upds and dq_upds structure variables in meminit.c
- Updated structure member of s_cfg->LpmStateEnableMask to PmcLpmS0ixSubStateEnableMask
in fsp_params.c
BUG=b:213959910
BRANCH=None
TEST=Build and boot brya
Cq-Depend: chrome-internal:4448696, chrome-internal:4445910
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.corp-partner.google.com>
Change-Id: I39646c6812afbf622171361b8206daeacdaafac0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Per customer spec, change ELAN touch HID from ELAN9050 to ELAN9008.
BUG=b:214010928
TEST=touch screen is functional.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ia95fdb378aaf241e38c0beb8ec392d57d77dc4db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61027
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the name of the include guard for
soc/mediatek/common/include/soc/emi.h.
BUG=none
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: Iddac3467959545b7db141545aaa2a135536f44f1
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
This function actually dumps cbmem to the UART. This change renames the
function to make that clear.
BUG=b:213828947
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icc314c530125e5303a06b92aab48c1e1122fd18c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Move header to path with all other test headers to make include paths
unambigous.
Change-Id: Ie2dbb055df658272424df95f58d84caaeba3fc8f
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
In order to avoid having the FSP fail to detect the SSD device
downstream of the RP, its PERST# must be deasserted earlier in
the boot flow, therefore move PERST# deassertion to a romstage
GPIO table.
BUG=b:213828931
TEST=Build FW and run stress exceed 1000 cycles.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I4e5eed7db16e1420ccbc22a5c30b00bedd190a2d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove vbp & hbp as the names are misleading and use edid variables
to simplify the video mode active and total calculations.
Change-Id: I9ccafabe226fa53c6f82e32413d4c00a0b4531be
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
During certain kind of test scenario, observed that CPU temperature
spikes till 98C and based on current thermal critical policy
temperature threshold of CPU set to 98C, it initiates the system wide
abrupt shutdown.
To avoid this kind of abrupt system shutdown, update cpu critical
temperature threshold from 98C to 105C.
BUG=b:213476881
BRANCH=glados
TEST=Built and booted on glados
Change-Id: I56df9285b3c247866a5bfa6dc59d1856544de41c
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Some SOC add PCI root busses structs at runtime without adding a
device struct to the bus because pci_scan_bus does it. An example
would be xeon_sp which has multiple root busses.
TEST: ocp/deltalake boots again.
Change-Id: I81d9c94652e34dbf9e8cec64fc34ef0042563037
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Subrata Banik