A struct pci_dev was allocated but not freed.
Change-Id: I6a8bbef6a118fc1f0aa7037e72c4d0dda9208f4b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1353037
Reviewed-on: https://review.coreboot.org/15971
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There can be cases where "found" wasn't initialized, do so.
Change-Id: Ifef8d61daa70e27ec39b7a8f3481d2316dfaa36e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1347334
Reviewed-on: https://review.coreboot.org/15969
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reserved regions showed different behavior for debug and regular builds.
Debug output was unfriendly, regular was wrong.
Print a proper error message and exit instead.
Change-Id: I9842ff61f7d554800e2041e8c4c607f22b2df79f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1287076
Reviewed-on: https://review.coreboot.org/15968
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This adds support for the Nuvoton NCT6791D Super I/O chip to the
superiotool.
The implementation is based on the Datasheet supplied by Nuvoton:
Datasheet Version: January 8th, 2016 Revision 1.11
Datasheet deviation:
- Defaults for control registers 0x20 and 0x21 are invalid.
Datasheet: 0xc562. Actual: 0xc803.
Change-Id: I8ced9738cd41960cbab7b5ea38ff19192d210672
Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/15252
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This removes the newlines from all files found by the new
int-015-final-newlines script.
Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15975
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Turned out that there are versions of the patch command that use the
left hand side path for new files created by a patch. This behavior is
incompatible with some of our patches. Stripping the topmost dir from
the path with -p1 helps.
While touching that line, I couldn't resist to drop a command
substituion (the `echo $patch`). It really shouldn't be necessary as the
path to the patch file is already expanded in the head of the for loop.
Change-Id: I95398605db6dd54a8b08d8bc84c6602edbea6e10
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/15908
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
crosfirmware.sh and extract_blobs.sh are not executable, change that.
Change-Id: Ib04df580a9acd4a422aedbdc15013b2ef505459a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/15922
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When no CFLAGS are explicitly provided to it, the GMP configure script
will figure out the best optimization flags to use on its own. In
particular, it will setup the march, mfpu and mtune flags based on
hardware detection.
However, when CFLAGS are provided, they are used as-is and such
detection doesn't happen. When the march, mfpu and mtune flags are not
provided (which happens when GMP wasn't built already), not only will
related optimizations be disabled, but some code might not build because
of missing support. This happens with NEON instructions on ARMv7 hosts.
Thus, it is better not to set CFLAGS and leave it up to the GMP
configure script to get them right and still reuse those later.
Change-Id: I6ffcbac1298523d1b8ddf29a8bca1b00298828a7
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15452
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Split the additional time stamps concerning depthcharge from
the cbmem utility sourcecode and move them into
commonlib/timestamp_serialized.h header.
Change-Id: Ic23c3bc12eac246336b2ba7c7c39eb2673897d5a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15725
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The binutils patch went in without updating the revision,
so we need to update it now. This was done in commit bcfa7ccb
(buildgcc: Update to binutils-2.26.1 & Fix aarch64 build issue)
Change-Id: Ifad4a2e3973f1f60d0ea840945e2bd097e1b4474
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15712
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Update to the latest version of GNU binutils
- Add a patch to undo the changes to binutils done by commit c1baaddf
so that arm-trusted-firmware builds correctly again.
Test: Build arm-trusted-firmware (ATF) with this patch. Build ATF
with binutils 2.26.1 changing the '.align x,0' to '.align x', which
changes the padding bytes to NOP instructions. Verify that everything
except the padding bytes is the same.
See https://sourceware.org/bugzilla/show_bug.cgi?id=20364 for more
information about this issue.
Change-Id: I559c863c307b4146f8be8ab44b15c9c606555544
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15711
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
olddefconfig is used to expand the miniconfig files with all the default
values removed by the 'savedefconfig' target.
Change-Id: Ic9c62f4c334919e8be478d30099819b90891670a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15319
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bootstrapping gcc is the recommended way if your host gcc's version
doesn't match the gcc version you're going to build. While a build
with an outdated host gcc usually succeeds, an outdated gnat seems
to be a bigger issue.
v3: Some library controversy: gcc likes the libraries it ships with
most but we don't want to install shared libraries. So we build
them static --disable-shared) and install only the minimum
(libgcc, libada, libstdc++). However, as the code of these
libraries might be used to build a shared library we have to
compile them with `-fPIC`.
v4: o Updated getopt strings.
o The workaround for clang (-fbracket-depth=1024) isn't needed
for bootstrapping and also breaks the build, as clang is only
used for the first stage in that case and gcc doesn't know
that option.
So far build tested with `make BUILDGCC_OPTIONS="-b -l c,ada"` on
o Ubuntu 14.04 "Trusty Tahr" (i386)
o Debian 8 "Jessie" (x86_64) (building python (-S) works too)
o current Arch Linux (x86_64)
o FreeBSD 10.3 (x86_64) (with gcc-aux package)
and with clang host compiler, thus C only: `make BUILDGCC_OPTIONS="-b"`
on
o Debian 8 "Jessie" (x86_64)
o FreeBSD 10.3 (x86_64)
v5: Rebased after toolchain updates to GCC 5.3.0 etc.
Build tested with `make BUILDGCC_OPTIONS="-b -l c,ada"` on
o Debian 8 "Jessie" (x86_64)
Change-Id: Icb47d3e9dbafc55737fbc3ce62a084fb9d5f359a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13473
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Refactor build() to make things more flexible:
Add a parameter that tells if we build a package for the host or for a
target architecture. This is just passed to the build_$package()
function and can be used later to take different steps in each case
(e.g. for bootstrapping a host gcc).
Move .success files into the destination directory. That way we can tell
that a package has been built even if the package build directory has
been removed.
Change-Id: I52a7245714a040d11f6e1ac8bdbff8057bb7f0a1
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Due to a newer flex version with which the scanner was recreated, we
also have to make the compiler less strict on the generated code.
Change-Id: I3758c0dcb2f5661d072b54a30d6a4ebe094854e6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/15482
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Require the user to specify which architecture the payload/stage
was built for before extracting it.
Change-Id: I8ffe90a6af24e76739fd25456383a566edb0da7e
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15438
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This linker error was the problem:
build/util/kconfig/zconf.tab.o: In function `conf_read_simple':
/home/jn/dev/coreboot/util/kconfig/confdata.c:413: undefined reference to `kconfig_warnings'
/home/jn/dev/coreboot/util/kconfig/confdata.c:413: undefined reference to `kconfig_warnings'
build/util/kconfig/zconf.tab.o: In function `sym_calc_value':
/home/jn/dev/coreboot/util/kconfig/symbol.c:388: undefined reference to `kconfig_warnings'
/home/jn/dev/coreboot/util/kconfig/symbol.c:388: undefined reference to `kconfig_warnings'
collect2: error: ld returned 1 exit status
/home/jn/dev/coreboot/util/kconfig/Makefile:339: recipe for target 'build/util/kconfig/gconf' failed
make: *** [build/util/kconfig/gconf] Error 1
Change-Id: I4a667c7c15b35618fb9ad536f2be5044b8031ab4
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15505
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The name 'bpdt_size' is used for a function as well as ia local variable.
As ifwitool is compiled using HOSTCC, there can be an older gcc version
used for the compilation. With gcc version 4.4.7 I get the following
error: declaration of 'bpdt_size' shadows a global declaration
To fix it, rename the function to get_bpdt_size so that names are
unique now.
Change-Id: I47791c705ac4ab28307c52b86940a7a14a5cfef8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15343
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Rewrite inline assembly for ARMv7+ to correctly annotate inputs and
outputs. On ARM GCC 6.1.1, this causes assembly output to change from
the incorrect
@ r0 is allocated to hold dst and x0
@ r1 is allocated to hold src and x1
ldr r0, [r1] @ clobbers dst!
ldr r1, [r1, #4]
str r0, [r0]
str r1, [r0, #4]
to the correct
@ r0 is allocated to hold dst
@ r1 is allocated to hold src and x1
@ r3 is allocated to hold x0
ldr r3, [r1]
ldr r1, [r1, #4]
str r3, [r0]
str r1, [r0, #4]
Also modify checkpatch.pl to ignore spaces before opening brackets when
used in inline assembly.
Change-Id: I255995f5e0a7b1a95375258755a93972c51d79b8
Signed-off-by: Benjamin Barenblat <bbaren@google.com>
Reviewed-on: https://review.coreboot.org/15216
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When doing make in util/cbfstool it contaminates the tree because it generates
the fmd_parser.
Change-Id: Ida855d1e57560c76d3fcfcc8e2f7f75bcdfdd5d4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/15221
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
fmaptool generates a header file used to hardcode certain values from
the FMAP in coreboot's binaries, to avoid having to find and parse the
FMAP manually for every access. For the offset of the FMAP itself this
has already been using the absolute offset from the base of the whole
ROM, but for individual CBFS sections it only used the offset from the
immediate parent FMAP region. Since the code using it intentionally has
no knowledge of the whole section tree, this causes problems as soon as
the CBFS is a child section of something not at absolute offset 0 (as is
the case for most x86 Chromebooks).
Change-Id: If0c516083949fe5ac8cdae85e00a4461dcbdf853
Reported-by: Rolf Evers-Fischer <embedded24@evers-fischer.de>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15273
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Implement function that automatically converts a SELF payload,
extracted from the CBFS, into an ELF file.
The code has been tested on the following payloads:
Working: GRUB, FILO, SeaBIOS, nvramcui, coreinfo and tint
Currently not working: none
Change-Id: I51599e65419bfa4ada8fe24b119acb20c9936227
Signed-off-by: Antonello Dettori <dettori.an@gmail.com>
Reviewed-on: https://review.coreboot.org/15139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Allow to write multiple phdrs, one for each non-consecutive section
of the ELF.
Previously it only worked for ELFs contaning a single
program header.
Change-Id: If6f95e999373a0cab4414b811e8ced4c93c67c30
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15215
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Checksum is calculated by using 2s complement method. 8-bit sum of the
entire subpart directory from first byte of header to last byte of last
partition directory entry.
BUG=chrome-os-partner:53508
Change-Id: I991d79dfdb5331ab732bf0d71cf8223d63426fa8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15200
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
1. The checksum method that was documented is not correct. So, no use
filling in a value based on wrong calculations. This can be added back
once updated information is available.
2. Checksum does not seem to affect the booting up of SoC. So, fill in 0
for now.
Change-Id: I0e49ac8e0e04abb6d7c9be70323612bdef309975
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15145
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Update pack and header order and mark the entries as mandatory and
recommended w.r.t. ordering (mandatory = essential for booting,
recommended = okay to change, but this config is tested and known to work).
Change-Id: Ia089bdaa0703de830bb9553130caf91a3665d2c4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15144
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Scan the boot block when building it with C_ENVIRONMENT_BOOTBLOCK
selected.
TEST=Build and run with Galileo Gen2
Change-Id: I922f761c31e95efde0975d8572c47084b91b2879
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15130
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current implementation from Vladimir simply dumps 1 MB of memory
contents starting at the base address of the second PCI device (which
most likely is the VGA controller on Intel systems). This locks up a
number of different systems, e.g. my Ibex Peak-based T410s.
This patch documents the issue and stops dumping the graphics registers
for the -a/--all parameter.
Change-Id: I581bdc63db60afaf4792bc11fbeed73aab57f63a
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Adds a label for each tool included in the cbfstool package
in order to build them more easily through Make.
Change-Id: Id1e5164240cd12d22cba18d7cc4571fbadad38af
Signed-off-by: Antonello Dettori <dettori.an@gmail.com>
Reviewed-on: https://review.coreboot.org/15075
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This adds the ISA bridge device id for the Intel C160/X99 series
chipset to the intelmetool.
Change-Id: I2e7db0fe1692985ebb167b9a44ab412a45a9f3bd
Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/15053
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot. This processing builds a set of implemented
(done) routines which are marked green in the table. The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table. The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).
Add some Kconfig values:
* CREATE_BOARD_CHECKLIST - When selected creates the checklist file
* MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
Documenation directory
* CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
* <stage>_complete.dat - Lists all of the weak routines
* <stage>_optional.dat - Lists weak routines which may be optionally
implemented
TEST=Build with Galileo Gen2.
Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This avoids re-declaring common macros like ARRAY_SIZE, MIN, MAX and
ALIGN. Also removes the issues around including both files in any
tool.
Also, fix comparison error in various files by replacing int with
size_t.
Change-Id: I06c763e5dd1bec97e8335499468bbdb016eb28e5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14978
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since fit.c is the only caller of this function move it out of common.c
and into fit.c.
Change-Id: I64cc31a6d89ee425c5b07745ea5ca9437e2f3fcf
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14949
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
If '-b' isn't passed when adding an FSP file type to CBFS allow
the currently linked address to be used. i.e. don't relocate the
FSP module and just add it to CBFS.
Change-Id: I61fefd962ca9cf8aff7a4ca2bea52341ab41d67b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14839
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add support for a basic generic device in the devicetree to bind to a
device that does not have a specific bus, but may need to be described
in tables for the operating system. For instance some chips may have
various GPIO connections that need described but do not fall under any
other device.
In order to support this export the basic 'scan_static_bus()' that can
be used in a device_operations->scan_bus() method to scan for the generic
devices.
It has been possible to get a semi-generic device by using a fake PNP
device, but that isn't really appropriate for many devices.
Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid
everything being rewritten. Clean up the local paths that leak into the
generated configs.
Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Use the second token for an i2c device entry in devicetree.cb to
indicate if it should use 10-bit addressing or 7-bit. The default if
not provided is to use 7-bit addressing, but it can be changed to
10-bit addressing with the ".1" suffix. For example:
chip drivers/i2c/generic
device i2c 3a.1 on end
end
Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14788
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently you cannot assign a string to a register in devicetree because
the quotes are removed when parsing and the literal is assigned directly.
Add a parse option for two double-quotation marks to indicate a string
and return a quoted literal that can be assigned to a register with a
'const char *' type.
Example:
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "uid" = "1"
device i2c 15 on end
end
Change-Id: I621cde1f7547494a8035fbbab771f29522da1687
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14787
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Long options can be useful when writing examples and documentation
as they are more expressive and obvious to the reader.
Change-Id: I39496765ba1f15ccc2ffe1ad730f0f95702f82b8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14736
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
If the option is not provided, ssh uses the default port for the host,
which is usually 22, but may be overridden in the user's SSH
configuration.
Change-Id: I303e9aeae16bd73a96c5e6d54f8e39482613db28
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14522
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In some configurations, "git push <remote>" (without a branch name)
refuses to do anything.
Change-Id: I23a401b39dd851e9723676586c7f29afa111b49d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14539
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
- manpage
- usage message
- new warning message if -S is used on an unsupported chipset
Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14624
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
FSP 2.0 uses the same relocate logic as FSP 1.1. Thus, rename
fsp1_1_relocate to more generic fsp_component_relocate that can be
used by cbfstool to relocate either FSP 1.1 or FSP 2.0
components. Allow FSP1.1 driver to still call fsp1_1_relocate which
acts as a wrapper for fsp_component_relocate.
Change-Id: I14a6efde4d86a340663422aff5ee82175362d1b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Currently, convert_fsp assumes that the component is always XIP. This
is no longer true with FSP 2.0 and Apollolake platform. Thus, add the
option -y|--xip for FSP which will allow the caller to mention whether
the FSP component being added is XIP or not. Add this option to
Makefiles of current FSP drivers (fsp1_0 and fsp1_1).
Change-Id: I1e41d0902bb32afaf116bb457dd9265a5bcd8779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
(1) Added following new function.
cbfs_locate_file_in_region - to locate (and mmap) a file in a flash
region
This function is used to look for MMA blobs in "COREBOOT" cbfs region
(2) mma_setup_test.sh would write to "COREBOOT" region.
(3) changes in mma_automated_test.sh. Few MMA tests need system to
be COLD rebooted before test can start. mma_automated_test.sh would
do COLD reboot after each test, and so i would sync the filesystem
before doing COLD reboot.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB4). Able to locate MMA files in CBFS
Not tested on Glados.
Change-Id: I8338a46d8591d16183e51917782f052fa78c4167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1e418dfffd8a7fe590f9db771d2f0b01a44afbb4
Original-Change-Id: I402f84f5c46720710704dfd32b9319c73c412e47
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331682
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14125
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
mma_automated_test.sh takes a config file (/usr/local/mma/tests) as
input and executes all tests mentioned in the config file.
format of the config file is one or more lines mentioned below.
<MMA test name> <MMA test param> <#count>
e.g. consider following config file.
Margin1D.efi Margin1DRxVrefConfig.bin 4
RMT.efi RMTConfig.bin 1
MarginMapper.efi ScoreTxVref-TxDqDelayConfigCh1.bin 2
Margin2D.efi Margin2D_Cmd_Ch0_D1_R0_Config.bin 3
This will execute Margin1D.efi MMA test 4 times with
Margin1DRxVrefConfig.bin param and results will be stored
in DUT under /usr/local/mma/results_<date-time-stamp>
with Margin1D_Margin1DRxVrefConfig_1.bin to
Margin1D_Margin1DRxVrefConfig_4.bin name. Subsequently all tests
will be executed and results will be stored.
/etc/init/mma.conf invokes mma_automated_test.sh when DUT
starts. And if valid test config is preset at /usr/local/mma/tests,
mma_automated_test.sh will continue executing the tests. Each time
DUT will be rebooted and next test in sequence will be executed.
Overall follow these steps to start MMA.
(1) create /usr/local/mma/tests file with the syntax mentioned above.
(2) either reboot the DUT (mma.conf will be called at each boot time,
which would run the mma_automated_test.sh) or execute "start mma"
command (to save a reboot cycle.)
(3) all test results can be found under
/usr/local/mma/results_<date-time-stamp> where <date-time-stamp> is
YY_MM_DD_HH_mm format (YEAR_MONTH_DAY_HOUR_MINUTE) when you started
the mma tests.
BRANCH=none
BUG=chrome-os-partner:43731
TEST=Build and Boot kunimitsu (FAB3). MMA automation tests executes
and results get saved.
Change-Id: I6805fdb95b7ff919f9c8e967b748e4893a3f9889
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 68c0a531ba3fc335b92b17002e75412195b778c4
Original-Change-Id: I92db7ca47e1e3e581c3fbb413f11e2c3e6d19b6b
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/313180
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/12928
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The IPQ40xx Primary Boot Loader (PBL, i.e. Boot-ROM) expects an
ELF in the boot medium to load and boot. These scripts combine
the Secondary Boot Loader (SBL) and Coreboot ELF to an image as
expected by the PBL.
BUG=chrome-os-partner:49249
TEST=Able to boot and reach depthcharge
BRANCH=none
Change-Id: I5d02b7f1f58bb23d81a3e19fb9b78f3a999b89f3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 819c7f2a810ca2880718ba14f2451f06eef4d98b
Original-Change-Id: I017207b2d4108de150853f421aa7bcfd0e12e9a4
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340181
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14680
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
and re-generate _shipped files
Change-Id: I7a18824d64d3f6212e8566695376bf97e2196ee2
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14733
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
This converts the argument parsing to allow us to add longopts
using GNU getopt(1).
Shortopts should be reserved for general parameters. Longopts can be
used to tweak specific behaviors. For example, we might wish to add
options to set SSH port, timeout, and authentication parameters
with "--ssh-port", "--ssh-timeout", "--ssh-identity", etc.
Change-Id: Idee5579079dbbb7296ad98f5d6025b01aab55452
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14523
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
A previous patch [1] to make top-aligned addresses work within per
fmap regions caused a significant regression in the semantics of
adding programs that need to be execute-in-place (XIP) on x86
systems. Correct the regression by providing new function,
convert_to_from_absolute_top_aligned(), which top aligns against
the entire boot media.
[1] 9731119b cbfstool: make top-aligned address work per-region
Change-Id: I3b685abadcfc76dab8846eec21e9114a23577578
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14608
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update gdb to 7.11 and expat to 2.1.1
riscv64-elf is still broken.
Change-Id: Id7605f4274fcb15f9c3e366f5c492328f70f7956
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14461
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
New tools:
* mpfr 3.1.4
* binutils 2.26
* gcc 5.3.0
* llvm/clang 3.8.0
Patch changes:
* binutils-2.25_fix-aarch64.patch: fixed in 2.26
* binutils-2.25_host-clang.patch: the positions of header file
includes have been adjusted
* binutils-2.25_no-bfd-doc.patch: update to 2.26
* binutils-2.25_riscv.patch: update from riscv-gnu-toolchain
* gcc-5.2.0_elf_biarch.patch: update to 5.3.0
* gcc-5.2.0_gnat.patch: update to 5.3.0
* gcc-5.2.0_libgcc.patch: update to 5.3.0
* gcc-5.2.0_nds32.patch: update to 5.3.0
* gcc-5.2.0_riscv.patch: update from riscv-gnu-toolchain
* cfe-3.7.1.src_frontend.patch: update to 3.8.0
In the latest code of riscv-gnu-toolchain project, the patch for
{binutils,gcc}/config.sub has been removed, and the target is renamed
as riscv32 and riscv64. The `riscv' to `riscv64' change in xcompile is
in another commit.
Test results:
All GCC and LLVM/clang toolchain build successfully.
x86,arm: qemu boots
power8: firmware fails to boot
aarch64,mips: not tested
riscv: firmware fails to build with new binutils
clang: firmware fails to boot
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I42ce89c29263d768d161c28199994f17d0389633
Reviewed-on: https://review.coreboot.org/14227
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Always set HOSTCFLAGS to the flags GMP was built with, defaulting to
"-Os" if it isn't built yet. Previously, if GMP was already built or
not even in the list of packages to be built, this was silently skipped
and other packages were built with empty HOSTCFLAGS.
Change-Id: I29b2ea75283410a6cea60dc1c92b87573aebfb34
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13550
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The xz archives are slightly smaller than the bz2 archives for gmp
and mpfr, so use them instead to speed up the download.
Change-Id: I3729455cdbc46e5a0cff119ecca97b0e00c3d402
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14462
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Both packages are not using the target architecture. Drop it,
and remove them from package_uses_targetarch
Change-Id: I58efde4cb7cc39e7e3c31527eb7682e318928100
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14464
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
By exporting base and offset of CBFS-formatted fmap regions, the code
can use these when it's not prudent to do a runtime lookup.
Change-Id: I20523b5cea68880af4cb1fcea4b37bb8ac2a23db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14571
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Just because an 'as' with a certain prefix is available does not guarantee
that a 'gcc' with the same prefix is available as well.
Without a check detect_compiler_runtime() would try to execute an
unavailable binary and print something like this:
.../xcompile: line 218: arm-linux-gnueabi-gcc: command not found
Change-Id: Icbadfeb2860152f7cf7696a9122521d0d881f3aa
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14563
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Gitweb isn't online anymore, so fix a few broken links.
Change-Id: I7fdfcb60f83a718c9a5b6c7f7ef4df9206451d95
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14559
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Test results under 16 days old display with an incorrect background color
due to the leading zero not being preset in the associated HTML color code.
Add the leading zero where needed to generate a valid HTML color code.
Change-Id: I0dfe29ec1afc409a4908073922ac31a4091f0f1f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14514
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
A major issue with the board-status Wiki page is that it shows all
test results equally regardless of age. As a test result ages it
becomes more likely that the board no longer works peroperly under
coreboot due to code churn.
Visually indicate board-test status "at a glance" by smoothly fading
the background color of the test result from green to yellow as the
test result ages. This patch sets the full yellow transition to 255
days after test for programming convenience, however the number of
days required to fully "stale" a test result could be modified
relatively easily.
Change-Id: I5a076a6cc17d53fda8e4681e38074fc1f46c0e12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14457
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
This is in response to issue #28: board-status should reject duplicate
uploads.
Change-Id: Iff99be154b35e8c0f9f05f9470d1c2dcff8510b8
Signed-off-by: Huimin Zhang <thehobn@gmail.com>
Reviewed-on: https://review.coreboot.org/14187
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On Mac OS X hdestroy seems to overwrite node->name. Hence
duplicate the string before stuffing it into the hash search
table.
Change-Id: Ieac2025f5c960cdb8d509dde7e92ba0dd32644b0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14443
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix warnings:
Unescaped left brace in regex is deprecated, passed through in regex;
marked by <-- HERE in m/\#\s*define.*do\s{ <-- HERE / at util/lint/checkpatch.pl line 3261.
marked by <-- HERE in m/\(.*\){ <-- HERE / at util/lint/checkpatch.pl line 3750.
marked by <-- HERE in m/do{ <-- HERE / at util/lint/checkpatch.pl line 3751.
marked by <-- HERE in m/^\({ <-- HERE / at util/lint/checkpatch.pl line 4194.
Change-Id: If0c1f07a16df9e6cd1c1393a31af8b8ea6a66b01
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/14310
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The coding guidelines say that all objects should have fully
qualified types (unsigned int instead of unsigned).
This script finds violations of that rule.
Steps for the filter:
1) Find all lines in the coreboot tree that have the word 'unsigned'
followed by a space.
2) Exclude directories that aren't in the include list or
are specifically excluded.
3) Exclude files that aren't specifically included.
4) Filter out legimitate uses 'unsigned int' or 'unsigned long' for
example.
5) Filter out lines that begin with '/*' or '*'
Change-Id: I46213c6a168e6aafa29a50af814bf7e0fcd32eb6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14269
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Because the builders have the coreboot cross-compilers in their path,
the XGCCPATH variable needs to be set after building the new toolchain
before it will be used.
- Add $DEST/bin to $PATH if $DEST is set, add the default location
for toolchain builds otherwise. Because the jenkins build image puts
the tools in the path, we ca
- Add KEEP_SOURCES option to help speed up compilation (Slightly).
- Log .xcompile for verification that the right toolchain was used.
- Verify that test-toolchain passes.
Change-Id: I7c270dab94be7e8f801d527169767018a24986e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Also, fix up the following driver subdirectories by switching
to the src/drivers/[X]/[Y]/ scheme as these are hard requirements
for the main change:
* drivers/intel
* drivers/pc80
* drivers/dec
Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14047
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This is taken from FILO and slightly enhanced.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ieadd9db3f1013ec1cd9f5a1dc44e17587617f1d1
Original-Change-Id: I961a7ddcd39657c9463806d7b82757eff0a4ac57
Original-Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Original-Reviewed-on: http://review.coreboot.org/190
Reviewed-on: https://review.coreboot.org/14386
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Datasheet
https://www.exar.com/content/document.ashx?id=21368
Add support for Exar chip used on a custom board
that was designed to connect to the Olive Hill Plus
development platform. The register dump was verified
on the Olive Hill Plus platform.
Change-Id: Ibd3e13eefb706bd99b6e5b38634f6855b39848ab
Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com>
Reviewed-on: https://review.coreboot.org/14367
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Store both the version number and git hash in the file name
when copying the buildgcc script to the destination directory.
Also, fix the quoting in the lines touched anyways, and move the
script to $TARGETDIR/share/
Change-Id: Ib37dc2be57ee7f0ae18a0b954f537f8b4c2db9d0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14347
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Do not disable warnings about unused but set variables to further
improve the code quality.
Change-Id: I25fa29ac42c9d09596d03f11fb01f31635a62a11
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/3981
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Changes in visible behaviour:
- The default make target doesn't run the tests anymore
- All generated files are stored under util/romcc/build/
(or $BUILD_DIR)
Change-Id: If003240742eb1902a6e9b337cdee299d7d66ee06
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14341
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add all currently clean directories.
Change-Id: Ibfb6432b485adb7fdc930f57ea0af4ff35921d37
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14332
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add some additional filters for files that do not require
license headers.
- Add an alternative wording for the BSD license that is used
in several files.
- Add string for dummy files
- Stop checking if there are no files left.
- Remove 'local' keyword which is not posix compliant.
Change-Id: I2ed1b0572b5fbe84ea86173b7ec2106454399547
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14324
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Differences:
- The test logic is now only implemented in one place (pending the
deletion of the old parts), whereas it previously was implemented
both as make rules and as a pair of shell scripts.
- Tests don't need to be registered anymore. Just adding a new file
with the correct name is enough to have it tested.
- The code is hopefully more readable and maintainable.
- The new test script supports colors (if the standard output is a
terminal and --nocolor was not passed on the command line).
Things to do in follow-up patches:
- Remove the old test code
- Test or remove fail_test*.c, hello_world*.c and raminit_test*.c
- Fix regressions that have built up over the years, while making sure
not to introduce new ones
- Makefile integration
- Jenkins integration
There are tests in the makefile that specify -fno-always-inline, but
this option doesn't exist anymore, so I didn't port them over.
Change-Id: Idd6b89368c1e36555cb880c37bbe07035c938cd7
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14291
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
This makes it easier to check the output against a reference output.
Change-Id: I9c7ae538b708399a5cadd18e498618d7480d240f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14276
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Newer versions of Linux implement a sysctl variable called vm.mmap_min_addr
that controls the minimum address a virtual memory mapping may have[1]. It is
usually set to 64KiB.
Map the start of the segment specified in util/romcc/tests/ldscript.ld to
128KiB, just to be sure.
[1]: https://www.kernel.org/doc/Documentation/sysctl/vm.txt
Change-Id: I72a5c65ca5e7d3a77d6ec897ae3287e3ea05cc2f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14277
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Previously, on systems that are supposed to have ME but
are librebooted, there was no message printed to tell the user
that no MEI was detected. Fixed this bug.
Change-Id: I59681c194ae5e76533dd777374e26d1aea727337
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/14334
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
- Look at entire tree instead of just the current commit. This was
causing the test to overlook some issues that were already in the tree.
- If git is on the system, and the code is in a git repo, use the
'git ls-files' command to find the files to examine. If those
conditions aren't met, fall back to using the find command.
- Wrap the command so it's easier to read.
Change-Id: I3dce219a29ffb1ae56a31318b995e3ba8ea43e70
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14194
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Many of the tools and libraries don't use a target architecture, but
they were still getting put in one. This change separates out the
builds that need the target architecture from the ones that don't,
and sets the build directory accordingly.
This will help keep from rebuilding the libraries when building all
of the tools if you keep the temporary files around (-t option).
Change-Id: Id6c17719332f2244657f103f5f07ca7812d51af1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On certain versions of /bin/sh the following sequence
causes problems.
'$CC --version | grep clang &>/dev/null && ...'
The above is a bashish for 2>&1 >/dev/null. However, buildgcc
is interpeted by /bin/sh which doesn't necessarily mean bash.
On dash it's effectively forking grep off into the background
and always evaluating an empty statement to /dev/null while
unconditionally running whatever follows the &&.
Change-Id: Ie3a2ebb12226434d50a7b2a7e254c8b80ae4c46b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14281
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a script to help us verify that our lint tests are working.
This isn't finished, because it should test all of the failure modes.
Some of the tests, 008-kconfig in particular have a lot of ways
that they can fail.
Currently the Kconfig test is triggered by removing the board
name file in test 006. This removes the only place the config
option for that board name is located.
Change-Id: If01c6daf1c99d097a19995b4befae90a3b5db2d6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14198
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
libgcc fails to compile on a number of platforms when a
non-GNU sed is used.
This patch has been verified by building the MIPS reference
toolchain on OS X.
Change-Id: Ia1c18ea4359de7707ac2e2640f1b8f107c47cd8c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14275
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
On certain versions of /bin/sh assigning variables with spaces
unquoted leads to failures. Therefore, quote variables that
are known to be passed in that have spaces.
Change-Id: I007c56c3bfb8183bb4b16cf0591f6aa508fd105d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14280
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This reverts commit 272a1f05b9.
In Chrome OS this command's usage was dropped in favor of another
solution. As it's not used drop the support for it.
Change-Id: I58b51446d3a8b5fed7fc391025225fbe38ffc007
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14261
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Otherwise, on OS X, some architectures will fail
to build libgcc (verified for ARM toolchain).
Change-Id: I8b58e0582596ad39cad92e9d478158c46a96a26e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14256
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Most cross compilers fail to compile on systems with Clang being the
default compiler (OS X and some BSDs). Clang dislikes some of GCC's
autogenerated code. We also missed switching CFLAGS to CXXFLAGS when GCC
switched to C++ compilation per default.
Change-Id: I87caa1a15982c431048aa79748ea7ef655a9a3a1
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14232
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change the existing chromeos.fmd files and the dts-to-fmd script to mark
RW_LEGACY as CBFS, so it's properly "formatted".
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I76de26032ea8da0c7755a76a01e7bea9cfaebe23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 717a00c459906fa87f61314ea4541c31b50539f4
Original-Change-Id: I4b037b60d10be3da824c6baecabfd244eec2cdac
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336403
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14240
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
cros_sdk puts weird stuff into CFLAGS and LDFLAGS and we never care
because we don't use CFLAGS. futility's Makefiles do.
BUG=chromium:595715
BRANCH=none
TEST=none
Change-Id: I512d5adb55cad8b31dc29d9c076ecd5d9c701cf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58739332ddba7ef759aac37f3a4410dd487f210f
Original-Change-Id: I66898c7e66d808047b0326c7471c64eaae950b15
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336436
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14237
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Datasheet: http://www.fintek.com.tw/files/productfiles/F81865_V028P.pdf
There is a multi-function select register listed as 0x2a-1 and 0x2a-2.
These are the original names in the datasheet, but superiotool will
display register 0x29 and 0x28 and their values.
This patch renames them both to 0x2a and shows both of the default values
for them. They are both 0x00, so one of them could be dropped though.
Change-Id: Iad91f9e4755d2d1a123e56ab0fa9257be7ea9978
Signed-off-by: Wilbert Duijvenvoorde <w.a.n.duijvenvoorde@gmail.com>
Reviewed-on: https://review.coreboot.org/5404
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The board status script wasn't checking the entire tree to make sure
that all boards had board_info.txt files. Also it would only print
out the first issue that was found.
Change-Id: I5f2fa9e564c805c6dbee7a35cab80c1c342567a5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14118
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Add coreboot build tests after running the toolchain build. This
verifies that everything still builds with the new toolchain.
Change-Id: Ifa51db897925c0b77791c83bbcbfd75045c907b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14156
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The intelmetool shows information about the Intel
Management Engine for different platforms.
Original source code can be found under following link:
https://github.com/zamaudio/intelmetool.git
Change-Id: I0eb17833a21eb04cf9245a7312289a4102bec1a9
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/14136
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Add check_for_library routine to test for missing libraries.
- Add a check for zlib.
- Remove 'utility' text from please_install() routine since we can test
for libraries or utilities now.
- Remove incorrect 'solution' text from alternate install since I was
updating that line.
Change-Id: Id5ef28f8bde114cbf4e5a91fc119d42593ea6ab2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14147
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are multi-threaded decompressors for .gz and .bz2 compressed
files. If they're installed, use them to decompress, if they're not,
use the standard single-threaded decompressors.
Change-Id: I397740817e6b234a43b62075899964bdab14f121
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14146
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add a newline after the supported version text.
Move $TARGETDIR left so that longer paths print better.
Change-Id: If520e1b8657a526dee27763aee62cb78777d020d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14145
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is required on powerpc64 to build both little endian and big endian
libgcc.
Change-Id: I295c8ee5e8131d4108e98d1bfd53abb8bd8982b2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14163
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update IASL from 20150619 to 20160318
See release notes at acpica.org
Change-Id: Ic7e7b3956378ad611069e984d5a59c78e4cb08b1
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/12817
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
make_idb.py only support RK3288 before, add chip parameter, so we can
support RK3399 either.
Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5
Signed-off-by: huang lin <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/13913
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This includes a fix that allows using cbootimage with paths containing
the "@" sign, which happens sometimes in jenkins configurations.
Change-Id: I83154afa35b6d24449e713e57031b1a93d7ac748
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14090
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change the comparison of build_timeless from -eq to =
This was generating an error if BUILD_TIMELESS wasn't set:
util/genbuild_h/genbuild_h.sh: line 27: [: : integer expression expected
This wasn't causing the script to fail, and won't even if 'set -e' is
added to the script because the error happens inside an 'if' clause,
which is specifically excluded from failue on 'set -e'.
Change-Id: I6a4e147ece23e83ee682d72db35be9e5d4088c78
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14080
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Commit c49014e (timestamp: add tick frequency to exported table)
refactors the code, but forgets to correctly scale the frequency to
megahertz, where the value is read from sysfs, so that printing time
stamp information shows milliseconds instead of microseconds, as can be
seen on the output `cbmem -t` for the ASRock E350M1 below.
```
0:1st timestamp 515
10:start of ramstage 515 (0)
30:device enumeration 515 (0)
40:device configuration 610 (94)
50:device enable 614 (4)
60:device initialization 624 (9)
70:device setup done 639 (14)
75:cbmem post 844 (205)
80:write tables 844 (0)
90:load payload 849 (4)
15:starting LZMA decompress (ignore for x86) 849 (0)
16:finished LZMA decompress (ignore for x86) 869 (20)
99:selfboot jump 869 (0)
Total Time: 350
```
So scale the return value correctly to megahertz, by dividing it with
1000.
```
0:1st timestamp 515,655
10:start of ramstage 515,655 (0)
30:device enumeration 515,663 (7)
40:device configuration 610,620 (94,957)
50:device enable 614,680 (4,059)
60:device initialization 624,618 (9,938)
70:device setup done 639,553 (14,934)
75:cbmem post 844,707 (205,154)
80:write tables 844,710 (2)
90:load payload 849,532 (4,821)
15:starting LZMA decompress (ignore for x86) 849,655 (123)
16:finished LZMA decompress (ignore for x86) 869,903 (20,247)
99:selfboot jump 869,922 (19)
Total Time: 354,261
```
Change-Id: Iea032c62487c7946b6194a90268755034c6350df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/14086
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Adds -D / --density option to change the chip density. This is only
implemented for IFD version 1 as I do not have an IFD version 2 to
test this. Density of both chips is changed by default, but a chip
can be selected using -C / --chip.
Change-Id: Iba7affbf6cbefa3147b7b0e019298d905e694716
Signed-off-by: Jan Tatje <jan@jnt.io>
Reviewed-on: https://review.coreboot.org/14032
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We want to start testing builds with additional Kconfig options to try
to get more coverage. This will allow us to enable various options to
test without having to add each individual option to the abuild script.
Change-Id: I9bb2bb6f38589e3bcc1282dc4cad51cf6f5149aa
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14016
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Change the makefile command $(shell pwd) to $(CURDIR) to find the
current directory without going out to the shell.
Change-Id: I4890eba6129630acd2883b92de77308d39949443
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13967
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add powerpc64le-linux-gnu & nds32le-elf to the instructions as
supported architectures
- Add nds32le-elf as a supported architecture so it will stop warning
when you build it.
Change-Id: Ifcdbc3d082eae5b9b5f8828914e7d2b7ed1f13a4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13961
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add a comment to try to lower possible confusion later if the jenkins
tool builder fails to build a new tool. The URLs for the packages that
are downloaded are checked against known locations so that someone can't
maliciously download a package from somewhere and run it on the build
server. This provides a little bit of security, but could confuse
someone if they don't realize it.
Change-Id: I7858e3d86fc705b480f6792b6adf3d5349580e01
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13955
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
We've recently added a jenkins test builder for the coreboot toolchain.
This patch allows what it builds to be controlled from the makefiles
checked into git instead of by a rule on the builder itself.
Change-Id: I65f70bac5ab97ecb27aae93ee370b26a2ab1f9c0
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13954
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Builds with BUILD_TIMELESS=1 shall always give a bit identical output
for stable inputs. This should help verifying that resulting rom files
stay the same across commits that shouldn't change the outcome.
To be useful for builds that rely on 3rdparty/arm-trusted-firmware,
this needs a similar change there.
Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13412
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
'archive' concatenates files into a single binary blob. Files are
indexed by the base names. See archive.h for the format description.
BUG=chromium:502066
BRANCH=tot
TEST=Tested on Glados
Change-Id: Iea108160e65c8c7bd34c02af824a77cb075ee64b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21a9ba860f29599ac029f8d49d32399c4e3a73a8
Original-Change-Id: I46b4efb339e3a1e05772ae752f2861026ca09cfc
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/311200
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: https://review.coreboot.org/12925
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Build make with the rest of the toolchain, since the targets using
a Chromium EC need make 4.x
Change-Id: I7efb0c25f605f16c2d9a1e7c4b203f3bcdae671b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13923
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Because the perl error messages go to stderr, we were not catching these
on the build server. If the script has an issue, we want to know
immediately, so change the bash script that calls into the perl lint
tool to pipe these to stdout.
Change-Id: Ieeec9ccbd59177cfd1859a9738a4ee1fab803d28
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Sandy and Ivy Bridge processors use the same socket, and a mainboard
with the socket can support both types of CPUs. However, they use
different native graphics init code for LVDS and cause a crash if
running the wrong code.
This change detects the CPU type and then selects the right code to
run. It will add some more code in ramstage. It also merges the
{SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS.
Tested on a Lenovo T520 with i7-2630qm and i7-3720qm
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91
Reviewed-on: https://review.coreboot.org/12087
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
The what-jenkins-does build runs distclean when building the utilities.
It doesn't fail the build if distclean fails, but it generates a
scary warning.
Change-Id: Iac90958951976ed326a89ef2b5f2d9f17f9f2d6b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In Kconfig files, the 'if' and 'endif' statements need to match up. A
file can't start an if statement that's completed in the next file.
Add a check as the files are being parsed to make sure that they match
up correctly.
Change-Id: If51207ea037089ab84c768e5a868270468cf4c4f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
1. Change the function which integrated one firmware, to the function
which pushes the whole group. Use fw_table as a parameter instead
of using the global table name.
2. Let PSP2 and PSP1 not dependent on the other. It turns out PSP2
can exist without PSP1. For some APU, the PSP directory has to be
put in PSP2 field (ROMSIG 0x14).
3. Reserve 32 more bytes in PSP2 header. It is defined by spec. It
is tested, and it is true.
These above changes are overlapping, hard to split them. Sorry.
Change-Id: I834630d9596d7fb941e2cad5d00ac3af04a537b5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13808
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
In e820entry struct, the members are defined using
standard types. This can lead to different structure size
when compiling on 32 bit vs. 64 bit environment. This in turn
will affect the size of the struct linux_params.
Using the fixed width types resolves this issue and ensures
that the size of the structures will have the same length
on both 32 and 64 bit systems.
Change-Id: I1869ff2090365731e79b34950446f1791a083d0f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
When linux is used as payload, the parameters to the kernel are build
when cbfstool includes bzImage into the image. Since not all
parameters are used, the unused will stay uninitialized.
There is a chance, that the uninitialized parameters contain
random values. That in turn can lead to early kernel panic.
To avoid it, initialize all parameters with 0 at the beginning.
The ones that are used will be set up as needed and the rest
will contain 0 for sure. This way, kernel can deal with the
provided parameter list the right way.
Change-Id: Id081c24351ec80375255508378b5e1eba2a92e48
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13874
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Numerous changes have gone in since the last bump, let's increase
the version.
Change-Id: Ie3ae8c24b26bd22b70bc5ddf5c1125b5b1d3a021
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13873
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This should allow the builder to download the packages securely.
Change-Id: If5feeff85bd551cbe08849421197d11cc2432d1e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13867
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When writing to a logfile, the color codes just make things confusing.
The --nocolor option will allow these to not be printed.
Change-Id: I67645aac20b420ac83b828e77e0e50aab88d3d47
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
coreboot's top level Makefile does the same, so let's stay consistent.
Change-Id: I9e995f3ecadd05d6fbfda64b45dee3a9900d9189
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The current default of 6 lines leaves us with no context
about the actual error:
*** ERROR: 3 warnings encountered, and warnings are errors.
coreboot-gerrit/util/kconfig/Makefile:38: recipe for target 'oldconfig' failed
make[1]: *** [oldconfig] Error 1
make[1]: Leaving directory 'coreboot-gerrit'
Change-Id: I67e7d740e7b3b1c66005dc1bf50557a20bc15428
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12720
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Our GDB doesn't support RISC-V yet, so let's disable it for now
to keep the build from breaking.
Change-Id: Iecc6d97fb16d16410c56965abeea55c67800f220
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13872
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
With this change you can say
$ make DEST=/opt/cross-1.35
to get all of the cross toolchain built and installed to /opt/cross-1.35
Change-Id: Icc3e605c4824bfa2831d030e4ed9dd0331ff722f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
qemu-power8 wants to tell about itself with XML, and so
we need to build gdb with EXPAT so it can understand XML.
Change-Id: I460e27f883956ed5d54e6070916e2682ee0f7a1b
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It was tested with a mini-PCI POST card on a Toshiba
Satellite 1410 laptop with the stock BIOS.
Change-Id: Icdc0860e2c72b17862601c2cc59eaf0f3d8a0e54
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/13763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This reverts commit 17cb0370a7.
It’s the wrong thing to do, to just disable the warning. The code is
fixed for 32-bit user space now in Change-Id
I85bee25a69c432ef8bb934add7fd2e2e31f03662 (commonlib/lz4_wrapper: Use
correct casts to ensure valid calculations), so enable the warning
again.
Change-Id: I6d1c62c7b4875da8053c25e640c03cedf0ff2916
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/13772
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The builders run perl scripts in taint mode, and some of the checks
that the kconfig lint script were running were tainted, causing
the script to terminate early when running on the servers.
This checks to see if taint mode is enabled, and untaints the path
if it is. All external tools (git & grep) must be in
/bin, /usr/bin, or /usr/local/bin.
This also removes the check for unused kconfig files if taint mode
is enabled.
Change-Id: I8d1e1c32275f759d085759fb5d8a6c85d4f99539
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13751
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
There was a report that xcompile wasn't finding the compilers correctly,
so to aid in future debugging, this adds a parameter to show what
xcompile is doing as it runs.
Run from the command line:
./util/xcompile/xcompile --debug
Change-Id: I779cb3de7b4e3f62a2ef2a6245c3538be518870c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13047
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It seems that the exact behavior of -Wsign-compare changes between GCC
versions... some of them like the commonlib/lz4_wrapper.c code, and some
don't. Since we don't have a well-defined HOSTCC toolchain this slipped
through pre-commit testing. Explicitly silence the warning to ensure
cbfstool still builds on all systems.
Change-Id: I43f951301d3f14ce34dadbe58e885b82d21d6353
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13769
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some users may wish to run this script using a coreboot image
that does get built in the usual build/ directory, for example
if abuild is used to generate the image.
Change-Id: I7e98780f8b7b57ebbf3babd6a289f0e4fd4103d8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12489
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This turned out really handy when I tried to build coreboot
for my Chromebox.
These scripts can be used to extract System Agent reference code
and other blobs (e.g. mrc.bin, refcode, VGA option roms) from a
Chrome OS recovery image.
crosfirmware.sh downloads a Chrome OS recovery image from the recovery
image server, unpacks it, extracts the firmware update shell archive,
extracts the firmware images from the shell archive.
To download all Chrome OS firmware images, run
$ ./crosfirmware.sh
To download, e.g. the Panther firmware image, run
$ ./crosfirmware.sh panther
extract_blobs.sh extracts the blobs from a Chrome OS firmware image.
Right now it will produce the ME firmware blob, IFD, VGA option rom,
and mrc.bin
Change-Id: I5fb7e14b10e03e18cd360bc35f1dc92e8ed34e63
Signed-off-by: Joe Pillow <joseph.a.pillow@gmail.com>
Reviewed-on: https://review.coreboot.org/13752
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch ports the LZ4 decompression code that debuted in libpayload
last year to coreboot for use in CBFS stages (upgrading the base
algorithm to LZ4's dev branch to access the new in-place decompression
checks). This is especially useful for pre-RAM stages in constrained
SRAM-based systems, which previously could not be compressed due to
the size requirements of the LZMA scratchpad and bounce buffer. The
LZ4 algorithm offers a very lean decompressor function and in-place
decompression support to achieve roughly the same boot speed gains
(trading compression ratio for decompression time) with nearly no
memory overhead.
For now we only activate it for the stages that had previously not been
compressed at all on non-XIP (read: non-x86) boards. In the future we
may also consider replacing LZMA completely for certain boards, since
which algorithm wins out on boot speed depends on board-specific
parameters (architecture, processor speed, SPI transfer rate, etc.).
BRANCH=None
BUG=None
TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on
Oak to be about ~20ms faster (cutting load times for affected stages
almost in half).
Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13638
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change I9dd8e4027be21363015cd8df9918610e206afce2 replaces
colons with underscores in paths, to improve compatibility of paths.
This breaks any attempt to interpret the timestamp part of the tree
as a timestamp, so revert the change before doing so.
Change-Id: I0e82e4045120700e9b4fcc8c6e54d761068eaea3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: https://review.coreboot.org/13766
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The commit description is enough and this avoids hourly updates of the
timestamp by a cron job.
Change-Id: I30e9fcf28caf94edbb816c22bc8fbcb7ab09ae6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13744
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I952a694f645caf9d9726965e39afc09c6fdce0e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13741
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I1240c215f3d6c3934911c096e2ecbabff175d501
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13740
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If we only need to "combo" two PSP directories into one image,
we can put first address in romsig 0x10 and second one in
romsig 0x14.
If we really need to put three, the 0x14 is the combo directory
which points to multiple level-2 PSP directories.
I guess that two PSP can also use combo directory, with only
one level-2 directory. But nobody seems to do that.
Change-Id: Ic450a846bc04db90a75cd417b6d7104fe2a5b177
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13739
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This changes how we build and use cbfstool:
1. If build/cbfstool exists, use it.
2. Otherwise, try util/cbfstool/cbfstool.
3. As a last resort, build it and clean it when we're done.
Hopefully this will resolve issues people have had with permissions
and reduce overhead of building cbfstool when not necessary.
Change-Id: I5de6581ca765e5a8420b101a5865ddd633334b9c
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/12490
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This is a pretty basic script that can be downloaded with wget to a
ubuntu-based live image, and will set it up so that the board_status
script can connect and run cbmem.
1) Verify that this is being run on a ubuntu-based live image by
checking for the installer.
2) Install and configure the ssh server.
3) Set a root password 'coreboot' so that root can log in.
4) download and build cbmem.
5) find and print the IP(s) that should be used to connect.
Change-Id: I068423c9f5501b156f25371d89559f4a206916b5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13648
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Drop buggy duplicate implementation of intXX handlers
and provide enough glue to use all of YABEL.
Change-Id: I2db77a56a2a991cb84876456dcbb3a843a0d9754
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/12117
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
In accordance to change I8bd981c4696c174152cf41caefa6c083650d283a
change autoport as well, as suggested by Vladimir.
Change-Id: I7cdaa779c11fd3f791a3ad213c24d927b5da76b9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13731
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Power 8 was once again having build issues. Adding --with-system-zlib
fixes them. It seems the builtin one is only needed when you are going
to build programs, and it falls apart in other cases.
Searching --with-system-zlib reveals this to be a very popular topic.
This has not broken other toolchain builds (for me); it should not for
anyone else. Then again, this is gcc, about which I need say no more.
Change-Id: Ica9d057d88982543b5dda471cc949c31fe15932f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/13700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
oldconfig is regularly used to clean up templates that sometimes contain
duplicates or old symbols.
Since it cleans up the config, it doesn't need to fail on issues.
Change-Id: Ife0e9e3b9bfdde1eb6be0e2e38e81b9042cb7950
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13687
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Apparently acpica-unix is shipped under
"A non-open source license (the 'Intel license')" while acpica-unix2
comes under GPLv2/BSD dual license. (see https://acpica.org/Licensing)
So go with unix2.
Change-Id: I412812187bbf488eb4ad6d7fb8d2840f2f5e06d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13686
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
cbfstool has a routine to deal with old images that may encourage it to
overwrite the master header. That routine is triggered for
"cbfstool add-master-header" prepared images even though these are not
at risk, and - worse - destroys the chain structure (through a negative
file length), so avoid touching such images.
Change-Id: I9d0bbe3e6300b9b9f3e50347737d1850f83ddad8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13672
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When updating an old .config file that has a symbol that has been
removed from the current Kconfig tree, kconfig will generate a warning
and fail to save the updated file. This is incredibly annoying, and
not the goal when trying to eliminate Kconfig warnings.
Instead of generating a warning, just print a message that it's being
ignored. This will remove the offending symbol, while allowing the
updated config file to be saved.
Split the change from 1 line to 3 lines to keep it at 80 characters.
Change-Id: I09d5775c9ed14bde80077b51b862a7f41bee098a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13674
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
off_t wants to be printed with %zd, not %d.
Change-Id: I3f6e1988bb306f4a7738f1f3ccb2093518e4ceb3
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13655
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Make sure that the statically defined CRC functions are
enabled by the same conditionals as the code using them.
Change-Id: Ic24e2ed1a80b8e5f6623881b08d86f7b608a206e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13654
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
dep has not been defined (and will hence break the build)
LDFLAGS is not used.
Change-Id: I4f91e1e7a176367aa4e1a1c63a2afc0b3186767e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13653
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
- Add the doimage sources in util/marvell
- Add dependency in root makefile
- Add dependency in makefile for armada38x soc
BUG=chrome-os-partner:47462
TEST=emerge-cyclone coreboot
BRANCH=tot
Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab
Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9
Original-Signed-off-by: Kefei Yao <kfyao@marvell.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/318046
Original-Commit-Ready: Kan Yan <kyan@google.com>
Original-Tested-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Kan Yan <kyan@google.com>
Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org>
Reviewed-on: https://review.coreboot.org/13137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- Add lint-stable script with just error checking
- Enable warnings in addition to errors in non-stable test.
- Use git grep if the code is in a git repo now that exclusions are
working.
- Check for perl, and ask the user to install it if it isn't
available.
Change-Id: Ie60d21f4ef8a61d879f116eb2056eb805b0a55f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13542
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Make the gcc build system create multiple libgcc.a instances for
different ABIs.
Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13625
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In the same time remove few native gfx options which were improperly set
and only added dead code to the binary.
Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13649
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
To be able to run this as a lint-stable test, demote these to warnings
for now. After the current CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
issues get fixed, these can be promoted again.
Change-Id: I1432980eb0c871fc61c12dcc351f8d46513a7965
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13541
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This looks at the coreboot codebase for the IS_ENABLED macro, and
gives an error if there is a symbol used without the CONFIG_ prefix.
This only works for symbols of type bool.
A future check will be added for all symbols, but that will take
a significant amount of time to run, because each symbol will need
to be searched for individually.
Change-Id: I92f2de2d231610d1a788da965f21966d89c2f25c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13538
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is needed for stout EC init.
Change-Id: I5c73499c17763229840152a473a2d820802ee2f6
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: https://review.coreboot.org/13535
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
We prefer the default AT&T dialect on x86
Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13135
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This patch adds strings for the timestamp changes and additions in the
Chrome OS bootloader (depthcharge). See http://crosreview.com/323783
for details and justification.
BRANCH=none
BUG=None
TEST=Booted Oak, confirmed that cbmem output includes new timestamps.
Change-Id: I9ad68edca660f4e4286e680316b4e14f1259d1bc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1b1f6d669f62217ed701cd3561b9d14973d890a
Original-Change-Id: I7256ca62c69f2ab7279fd2656fbbfa610e04fc44
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323871
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13576
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I forgot to add that when I added support to buildgcc.
Change-Id: I586d64805e72f9512057a4e0698bdee19cc53146
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13568
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Idee4eb5d112e3f6bffced0681e9112101bed6763 has renamed
the architecture by accident. Rename it back.
Change-Id: I5509d2aa09df513789325bc24d9b696a09cb898f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
This makes the cross{gcc,tools}-* targets build iasl again, without
building it many times for cross{gcc,tools}
Change-Id: I7546c2af5f7cce3a4f1a08f593fb5cbc675d69ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13564
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Update the qconf.cc and qconf.h to upstream code, which added support
of QT5 and removed the support of QT3.
All code is ported from kernel.org, with only one line added to qconf.cc.
int kconfig_warnings = 0;
Change-Id: Ice77cddcc00e43375039379978e55f42acf867f7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/13130
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of instructing users to edit xcompile when they want to build
a quark platform, give the build a way to set -march=586 so that
the quark code will build correctly. The Quark processor does not
support the instructions introduced with the Pentium 6 architecture.
Change-Id: I0ed69aadc515f86f76800180e0e33bcd75feac5a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13552
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
There is a lot of potential to completely get rid of Makefile
and keep everything in Makefile.inc, but for now this declutters
the main Makefile.inc.
Change-Id: I653313c74207f955514c036c81efcbfd988827c9
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13518
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Instead of passing a variable around and painstakingly making sure that
one target builds with it, and the others without, make IASL a
dependency of the "catch all" targets.
This also drops iasl as dependency from individual architecture targets,
but things are more orthogonal that way.
Note: instead of `make crossgcc-i386`, use `make crossgcc-i386 iasl`
Change-Id: I8cd2e89acdd0f795836571470bad28fbf8797f58
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13563
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some Chrome ECs are based on that architecture
Change-Id: Ib5d0c2f6f518fafc1ceb02c5f71c0935d16c66bb
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13562
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The ARM target can compile for much more than just v7a.
Change-Id: Ia4f67abcffdfe9c56c5d1848c75dfea83755e755
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13517
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If the GPLv2 or GPLv2+ license header is being used on a
coreboot file, make sure it has two paragraphs as specified by
the Common License Header section in the developer guidelines
in the coreboot wiki.
Change-Id: Ifffa0fa7272f5a4b129d4b7b8a515f8795bc2401
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the ability to release a given commit id, and normalize the tarballs
to use coreboot/1000 for owner and group, and the last commit date as
mtime for all files.
Change-Id: Ia349f429090fe9804f7f14c226812646e2f712be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13514
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Not much testing, update mostly so we can test with the
latest scan-build.
Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13516
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The compiler really supports a whole line of ARM CPUs, not just
ARMv7a:
arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a
armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m
armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m
armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native
So let's reflect this in the cross compiler name.
Change-Id: I717760d80954655b2de9ae019b813d81e9a75762
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The readme describes the operation and usage of kconfig_lint.
It also lists all the notes, warnings, and errors that kconfig_lint
looks for.
Change-Id: I873f394ff93fce42cd9638cbbad6134f1aef3a6a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13464
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't warn on Kconfig.orig and Kconfig~ files when trying to verify
that all the Kconfig files in the coreboot source tree are being loaded.
Change-Id: Ie7babe60b29735e5ccc5f93f4e42ad82dfb47044
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13462
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- The prompts were not getting incremented, so each prompt for a symbol
would overwrite the previous.
- Record the menu each prompt is in.
Change-Id: Ia282a30344d5e135f4f2027be9aff0e49a4e5edb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Although there's no reason we COULDN'T use tristate types, we haven't
up to this point. If there's a good reason to use them in the future,
this check can be removed.
Change-Id: I5f1903341f522bc957e394bc0fd288ba1adab431
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I7fed8b9fa827cb14f7373e7b774acc56e43cb6ff
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13459
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes at least one kconfig_lint warning.
Change-Id: I35edf57e90315a8372aaf3b41e923cd8dad7386a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13458
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The configuration that coreboot uses for setting selected symbols
typically involves a structure like this:
config BLEH_SPECIFIC_OPTIONS
def_bool y
select SYMBOL
This leads to an an extra kconfig symbol BLEH_SPECIFIC_OPTIONS
that is never referenced by anything else, generating a warning.
Since this is currently the construct that coreboot uses, filter it
out of the warnings for now.
Change-Id: I85a95e4c4e8469870c7f219f2a92955819845573
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13457
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I69a1e0b30fecca152e02a511c82248b6091b3d8b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13456
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Gnu make won't build in directories that have a colon in their name.
When the makefile expands a variable containing a dirctory name that
has colons in it, it seems to interpret that as a makefile target, and
fails the build.
Many other characters also confuse the makefiles, including spaces,
ampersand symbols, dollar signs, etc.
I've started including scripts into the board-status directories to
do the build of the rom that was tested, and this is preventing them
from working without renaming the directory before doing the build.
Change-Id: I9dd8e4027be21363015cd8df9918610e206afce2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13490
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
While assembling CBFS images within the RW slots on Chrome OS
machines the current approach is to 'cbfstool copy' from the
RO CBFS to each RW CBFS. Additional fixups are required such
as removing unneeded files from the RW CBFS (e.g. verstage)
as well as removing and adding back files with the proper
arguments (FSP relocation as well as romstage XIP relocation).
This ends up leaving holes in the RW CBFS. To speed up RW
CBFS slot hashing it's beneficial to pack all non-empty files
together at the beginning of the CBFS. Therefore, provide
the 'compact' command which bubbles all the empty entries to
the end of the CBFS.
Change-Id: I8311172d71a2ccfccab384f8286cf9f21a17dec9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13479
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In order to more easily process the output of 'cbfstool print'
with other tools provide a -k option which spits out the
tab-separated header and fields:
Name Offset Type Metadata Size Data Size Total Size
ALIGN_UP(Offset + Total Size, 64) would be the start
of the next entry. Also, one can analzye the overhead
and offsets of each file more easily.
Example output (note: tabs aren't in here):
$ ./coreboot-builds/sharedutils/cbfstool/cbfstool test.serial.bin print
-r FW_MAIN_A -k
Performing operation on 'FW_MAIN_A' region...
Name Offset Type Metadata Size Data Size Total Size
cmos_layout.bin 0x0 cmos_layout 0x38 0x48c 0x4c4
dmic-2ch-48khz-16b.bin 0x500 raw 0x48 0xb68 0xbb0
dmic-2ch-48khz-32b.bin 0x10c0 raw 0x48 0xb68 0xbb0
nau88l25-2ch-48khz-24b.bin 0x1c80 raw 0x48 0x54 0x9c
ssm4567-render-2ch-48khz-24b.bin 0x1d40 raw 0x58 0x54 0xac
ssm4567-capture-4ch-48khz-32b.bin 0x1e00 raw 0x58 0x54 0xac
vbt.bin 0x1ec0 optionrom 0x38 0x1000 0x1038
spd.bin 0x2f00 spd 0x38 0x600 0x638
config 0x3540 raw 0x38 0x1ab7 0x1aef
revision 0x5040 raw 0x38 0x25e 0x296
font.bin 0x5300 raw 0x38 0x77f 0x7b7
vbgfx.bin 0x5ac0 raw 0x38 0x32f8 0x3330
locales 0x8e00 raw 0x28 0x2 0x2a
locale_en.bin 0x8e40 raw 0x38 0x29f6 0x2a2e
u-boot.dtb 0xb880 mrc_cache 0x38 0xff1 0x1029
(empty) 0xc8c0 null 0x64 0xadf4 0xae58
fallback/ramstage 0x17740 stage 0x38 0x15238 0x15270
(empty) 0x2c9c0 null 0x64 0xd2c4 0xd328
fallback/payload 0x39d00 payload 0x38 0x12245 0x1227d
cpu_microcode_blob.bin 0x4bf80 microcode 0x60 0x17000 0x17060
(empty) 0x63000 null 0x28 0x37cf98 0x37cfc0
Change-Id: I1c5f8c1b5f2f980033d6c954c9840299c6268431
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13475
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since NetBSD does not support uname -o, push check for CygWin
inside separate non-failing condition in Makefile.
Change-Id: Ibd264384f49b33412f0ef8554bd9c9fb8f60a892
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12831
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds three timestamps to coreboot and the cbmem utility that
track the time required to read in the Chrome OS Vital Product Data
(VPD) blocks (RO and RW). It's useful to account for these like all
other large flash accesses, since their size is variable.
BRANCH=None
BUG=None
TEST=Booted Oak, found my weird 100ms gap at the start of ramstage
properly accounted for.
Change-Id: I2024ed4f7d5e5ae81df9ab5293547cb5a10ff5e0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b97288b5ac67ada56e2ee7b181b28341d54b7234
Original-Change-Id: Ie69c1a4ddb6bd3f1094b3880201d53f1b5373aef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/322831
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13139
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
With the introduction of flashmap cbfs alignment of files gets
broken because flashmap is located at the beginning of the flash
and cbfstool didn't take care about that offset.
This commit fixes the alignment in cbfs.
Change-Id: Idebb86d4c691b49a351a402ef79c62d31622c773
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13417
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: Id0316042f665ec9c095887cf6a37a7949ed8e861
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13421
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Not just *-linux-gnu.
Change-Id: Ib817c6d207d3b69ce7595505f2b45f3be35b7d2f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13420
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
What's the exact difference between TARCH, TSUPP and TBFDARCHS? Fear no
more, it's documented.
Change-Id: I18717eb1e20b1c0a82a485d391de2794a77c59ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13419
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Instead of people open coding the offset field access within a
struct buffer provide buffer_offset() so that the implementation
can change if needed without high touch in the code base.
Change-Id: I751c7145687a8529ab549d87e412b7f2d1fb90ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13468
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
It may still fail on non-Linux, and the compiler may do fancy things,
but it builds.
Change-Id: If3456f5fef8d01082a49978dc7cda5450f96f5cc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13416
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
gcc 4.4.7 fails to compile due to the missing initializers
for all struct members. Add initializers for all fields.
Change-Id: If1ad4fff0f965ccd7e821820c0703853c1e5c590
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13418
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add NetBSD-specific locations under pkg/ and missing linker flag
for libpciutils.
Change-Id: I812817a374aaba561b28d8a22f20d238c9dca32b
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/12830
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GMP's configure tries to build for 64-bit with a 32-bit userspace on
NetBSD too. Help it by forcing ABI=32.
Change-Id: I290ea0ef1626fdd88dc3ff74fadb9578ef6a1c9c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13067
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Make the requirement of python2 explicit in scripts that are incompatible
with python3.
Change-Id: I77f150bdb3aab316fc3c3a21b911db397fa0106f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13286
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This reverts commit 89798bcb0c.
Disable building gnat again as it turned out that many distros don't
ship with a sufficient recent version of gnat. We'll have to find a
reliable way to check for the installed gnat version and query the
user or bootstrap gcc in that case.
Change-Id: Ife7cf7c9d1567aca898ce308b120a7b9e146e5f5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/13422
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
This way users are not constrained to have it installed as
/usr/bin/python.
Change-Id: I822b6c402004aad8f2353e71afbd8ee3f9d26d45
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13285
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There can be an error when a cbfs file is added aligned or as
xip-stage and hashing of this file is enabled. This commit
resolves this error. Though adding a file to a fixed position
while hashing is used can still lead to errors.
Change-Id: Icd98d970891410538909db2830666bf159553133
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13136
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mt8173 boot rom expects the bootblock to be in a certain format.
gen-bl-img wraps our bootblock appropriately.
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I7486e548d356c5bd27261851f1f1bed620715e91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fbcd7959e0fda595de91899ace7236037ac833d3
Original-Change-Id: Ib9df440bfa95cf06e8041491ecdb34c357047acd
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292664
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/12613
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The script checks for a folder called documentation, while the folder
name is Documentation.
Without this change, I get this when running the script:
util/scripts/get_maintainer.pl: The current directory does not appear to be
a coreboot source tree.
Change-Id: Ied7ead7dfec33e9324f06d0ef60dcd6d7ba40104
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13062
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
I thought we'd be using gnatmake but it's deprecated. Who needs it
anyway?
Change-Id: Ic08add72e771fa346c8a736ea901863ea5737d91
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add functionality to cbfstool to generate file attributes
for position and alignment constraints. This new feature
can be activated with the -g option and will generate,
once the option has been enabled, additional attributes
for the files where position, xip or alignment was specified.
Change-Id: I3db9bd2c20d26b168bc7f320362ed41be349ae3a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/12967
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
These are generated from depthcharge's board/*/fmap.dts using the
dts-to-fmd.sh script.
One special case is google/veyron's chromeos.fmd, which is used for a
larger set of boards - no problem since the converted fmd was the same
for all of them.
Set aside 128K for the bootblock on non-x86 systems (where the COREBOOT
region ends up at the beginning of flash). This becomes necessary
because we're working without a real cbfs master header (exists for
transition only), which carved out the space for the offset.
Change-Id: Ieeb33702d3e58e07e958523533f83da97237ecf1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/12715
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
cbfs_add calculated a base address out of the alignment specification
and stored it in param.baseaddress.
This worked when every cbfstool invocation only added a single file, but
with -r REGION1,REGION2,... multiple additions can happen.
In that case, the second (and later) additions would have both alignment
and baseaddress set, which isn't allowed, aborting the process.
Change-Id: I8c5a512dbe3c97e08c5bcd92b5541b58f65c63b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The CBFS flag in fmd files isn't stored in the fmap, so allow storing it
out of band using the -R option.
Change-Id: I342772878d7f8ce350de1a32dc7b2a5b07d6617d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13058
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Somehow I lost a $ on headerlist between when I tested the script
and when I submitted it, turning headerlist into plain text instead
of a variable name. This makes the test always pass.
- Fix variable bug.
- exclude this script from the check.
- update test for empty HEADER_DIRS variable.
Change-Id: I6080c520bc741e9d689f7c66ee97879afc8ba38c
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13057
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
On Apple OS X, the ntohl and htonl need including header,
#include <arpa/inet.h>
Please refer the manpage for these command on OS X,
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man3/htonl.3.html
Change-Id: Ia942c58f34637c18222fbf985b93c48abf63c5b8
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/11672
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>