On certain Winbond SuperIO devices, when a PS/2 mouse is not
present on the auxiliary channel both channels will cease to
function if the auxiliary channel is probed while the primary
channel is active. Therefore, knowledge of mouse presence
must be gathered by coreboot during early boot, and used to
enable or disable the auxiliary PS/2 port before control is
passed to the operating system.
Add auxiliary channel PS/2 device presence detect, and update
the Winbond W83667HG-A driver to flag the auxiliary channel as
disabled if no device was detected.
Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13165
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The IOMMU/HT device was not routed correctly; add the proper APIC
mappting to the mptable generation code. Also clarify comments
surrounding the pin mappings.
Change-Id: I72ceb0f22dabdfa71a1f6231ccb841face08ff7a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13163
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The existing code did not allow for the second core of the BSP to
reside on an APIC ID other than 1, leading to a boot hang on Family
15h processors when APIC_ID_OFFSET was set to anything other than 0.
Furthermore, insufficient AP stack space was allocated for AP start.
Change-Id: I4ded3cfb3736149e2265848014352d7622d5042a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13158
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add the ability to release a given commit id, and normalize the tarballs
to use coreboot/1000 for owner and group, and the last commit date as
mtime for all files.
Change-Id: Ia349f429090fe9804f7f14c226812646e2f712be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13514
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Not much testing, update mostly so we can test with the
latest scan-build.
Change-Id: I50d28b7e0dfd31f9ae565c8515d5ab1760ca4c62
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13516
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The compiler really supports a whole line of ARM CPUs, not just
ARMv7a:
arm-eabi-gcc: note: valid arguments to '-march=' are: armv2 armv2a
armv3 armv3m armv4 armv4t armv5 armv5e armv5t armv5te armv6 armv6-m
armv6j armv6k armv6s-m armv6t2 armv6z armv6zk armv7 armv7-a armv7-m
armv7-r armv7e-m armv7ve armv8-a armv8-a+crc iwmmxt iwmmxt2 native
So let's reflect this in the cross compiler name.
Change-Id: I717760d80954655b2de9ae019b813d81e9a75762
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13515
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since this code is pulled in through commonlib, it will break compilation
of cbfstool on OSX.
Change-Id: I342bfa7e755aa540c4563bb5cd8cccacee39d188
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/13525
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The readme describes the operation and usage of kconfig_lint.
It also lists all the notes, warnings, and errors that kconfig_lint
looks for.
Change-Id: I873f394ff93fce42cd9638cbbad6134f1aef3a6a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13464
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Don't warn on Kconfig.orig and Kconfig~ files when trying to verify
that all the Kconfig files in the coreboot source tree are being loaded.
Change-Id: Ie7babe60b29735e5ccc5f93f4e42ad82dfb47044
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13462
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- The prompts were not getting incremented, so each prompt for a symbol
would overwrite the previous.
- Record the menu each prompt is in.
Change-Id: Ia282a30344d5e135f4f2027be9aff0e49a4e5edb
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13461
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Although there's no reason we COULDN'T use tristate types, we haven't
up to this point. If there's a good reason to use them in the future,
this check can be removed.
Change-Id: I5f1903341f522bc957e394bc0fd288ba1adab431
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13460
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I7fed8b9fa827cb14f7373e7b774acc56e43cb6ff
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13459
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes at least one kconfig_lint warning.
Change-Id: I35edf57e90315a8372aaf3b41e923cd8dad7386a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13458
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The configuration that coreboot uses for setting selected symbols
typically involves a structure like this:
config BLEH_SPECIFIC_OPTIONS
def_bool y
select SYMBOL
This leads to an an extra kconfig symbol BLEH_SPECIFIC_OPTIONS
that is never referenced by anything else, generating a warning.
Since this is currently the construct that coreboot uses, filter it
out of the warnings for now.
Change-Id: I85a95e4c4e8469870c7f219f2a92955819845573
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13457
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The code had originally been using standard grep to look through the
coreboot tree for Kconfig symbols. When this was switched to git grep,
the --exclude-dir options didn't work, and nothing was added to exclude
the directories that shouldn't be searched for symbols. This resulted
in invalid warnings as it searched directories that had Kconfig symbols
for other projects.
This merges the exclusion list for both the regular and git versions
of grep for consistent behavior.
Change-Id: I69a1e0b30fecca152e02a511c82248b6091b3d8b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13456
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is the very very minimum needed to compile the code.
Change-Id: I7f9e5f564181071591a4640019f59f91a4c456c6
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/13297
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some newer x86 systems can boot from non-memory-mapped boot media
(e.g. EMMC). The bootblock may be backed by small amounts of SRAM, or
other memory, similar to how most ARM chipsets work. In such cases, we
may not have enough code space for romstage very early on. This means
that CAR setup and early boot media (e.g. SPI, EMMC) drivers need to
be implemented within the limited amount memory of storage available.
Since the reset vector has to be contained in this early code memory,
the bootblock is the best place to implement loading of other stages.
Implement a bootblock which does the minimal initialization, up to,
and including switch to protected mode. This then transfers control
to platform-specific code. No stack is needed, and control is
transferred via a "jmp" such that no stack operations are involved.
Change-Id: I009b42b9a707cf11a74493bd4d8c189dc09b8ace
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/13485
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
bootblock.S was used strictly for setting up the system so that the
assembly generated by ROMCC could be executed. Since the
infrastructure now exists to run a bootblock wihtout ROMCC, rename
this file accordingly. this is done to prevent any future confusion.
Change-Id: Icbf5804b66b9517f9ceb352bed86978dcf92228f
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: https://review.coreboot.org/11784
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
By implementing a more complex options-for-region function, special
needs for certain files in certain regions can be dealt with.
Change-Id: I2e1e08d5357b717011c41675f76908bf2319f91d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13505
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Add files to fmap regions one-by-one, so we can modify options
per-file-per-region.
Change-Id: Ic3ff5a4e563796c9fdd5705236aef37c883abf5e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13504
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
When adding the cbfstool remove requirement of the UPDATE_IMAGE path to
cbfs-add-cmd, prebuil[dt]-files become identical in both cases.
Change-Id: I80faaf1c83368b9dd00a9f247bf89e6d596be996
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13503
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Also drop the second argument to cbfs-add-cmd because it's not needed
anymore.
Change-Id: Ie01d73f6b2aff09caccc397f72d6d8065624aebe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13502
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
And not in the global context.
Change-Id: Ife7394b1343663456c24316df6a07d883adb9ee9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13500
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
They used to be chained into a single make shell invocation but now
they're individual commands, which makes them easier to manage.
Change-Id: I22394fd31989d5180790818153f466c0e7ebbedd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13499
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
since commit f1e321001d, the UART init
should be in bootblock_mainboard_early_init() which runs before
console init. (see src/lib/bootblock.c)
Change-Id: Ib00afdd6e81e7689fbd743c8a5f547d424896d71
Reviewed-on: https://review.coreboot.org/13448
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Move the default select of "Use native graphics initialization" for
Peppy to the ChromeOS section as SeaBIOS (default payload) requires a
vBIOS and takes twice as long to load with this option enabled. For the
same reasons, this option shouldn't be enabled by default (def_bool y).
Change-Id: I1f2163e0a1e4bf8e5041dad150bdf7de804fb4db
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/13493
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
TEST=Boot to OS
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: I9b43eb4f6f7af62a8a0bbe7bfa08feee1eaca24e
Reviewed-on: https://review.coreboot.org/13506
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Gnu make won't build in directories that have a colon in their name.
When the makefile expands a variable containing a dirctory name that
has colons in it, it seems to interpret that as a makefile target, and
fails the build.
Many other characters also confuse the makefiles, including spaces,
ampersand symbols, dollar signs, etc.
I've started including scripts into the board-status directories to
do the build of the rom that was tested, and this is preventing them
from working without renaming the directory before doing the build.
Change-Id: I9dd8e4027be21363015cd8df9918610e206afce2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13490
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Now coreboot should do BIOS CAR setup along with NEM
mode setup.
This patch also provides a mechanism to use 16MB code caching
benefit although LLC still limited to 1M/1.5M based
on SOC LLC limit.
Here with unlimited cache line gets replaced. Now we could use
unlimited cache size along with well defined data size
[pg: updated to current upstream #defines]
BUG=chrome-os-partner:48412
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b
Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a
Original-Reviewed-on: https://chromium-review.googlesource.com/320855
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13138
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
If coreboot's build process is reproducible (eg. using the latest git
timestamp as source), bl31 is, too.
This requires an arm-trusted-firmware side merge first (in progress) and
an update of our reference commit for the submodule, but it also doesn't
hurt anything because it merely sets a variable that currently goes
unused.
Change-Id: If139538a2fab5b3a70c67f4625aa2596532308f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13497
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
The KGPE-D16 and KCMA-D8 use a Winbond W83667HG-A SuperIO. While
the Nuvoton NCT5572D is effectively the same core, and a close
enough match to get things working initially, the W83667HG-A
has a different LDN mapping and several extra features that
require a separate support driver.
Clone the Nuvoton NCT5572D and modify according to the W83667HG-A
datasheet, version 1.4.
Change-Id: I707ba2e40a22d41cd813003d84a82cb20304f55b
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13156
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Timothy Pearson