The mp2 PCI device is still present when no mp2 firmware is loaded. When
this device isn't explicitly enabled in the mainboard's devicetree, the
chipset devicetree default of the device being disabled is used. This
results in coreboot's resource allocator not allocating resources to the
device and since the bridge doesn't have enough MMIO space reserved, the
Linux kernel can't assign resources to it. To fix this problem, enable
the mp2 device in the mainboard's devicetree so that it gets its
resources assigned by coreboot.
TEST=Fixes the resource allocation for the mp2 PCI device.
dmesg output before the patch:
[ 0.210616] pci 0000:04:00.7: [1022:164a] type 00 class 0x118000
[ 0.210631] pci 0000:04:00.7: reg 0x18: [mem 0x00000000-0x000fffff]
[ 0.210641] pci 0000:04:00.7: reg 0x24: [mem 0x00000000-0x00001fff]
[ 0.210649] pci 0000:04:00.7: enabling Extended Tags
[ 0.240570] pci 0000:04:00.7: BAR 2: no space for [mem size 0x00100000]
[ 0.240572] pci 0000:04:00.7: BAR 2: failed to assign [mem size 0x00100000]
[ 0.240574] pci 0000:04:00.7: BAR 5: assigned [mem 0xd05c6000-0xd05c7fff]
dmesg output after the patch:
[ 0.210483] pci 0000:04:00.7: [1022:164a] type 00 class 0x118000
[ 0.210501] pci 0000:04:00.7: reg 0x18: [mem 0xd0500000-0xd05fffff]
[ 0.210515] pci 0000:04:00.7: reg 0x24: [mem 0xd06c6000-0xd06c7fff]
[ 0.210524] pci 0000:04:00.7: enabling Extended Tags
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I680ef9798f2f0e7e0646f0fd30bef58398b7bf19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72197
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently most of the FSP debug messages (when enabled) are truncated due to insufficient size of cbmem buffer.
Increase premem cbmem console size to 0x16000 bytes and cbmem buffer size to 0x100000 bytes so that cbmem buffer can contain most of the debug logs when FSP debug messages are enabled.
TEST=Verify output of 'cbmem -c' when FSP debug messages are enabled but MRC debug message.
Change-Id: I0273fb14916f213b686270a9dec4c1b47612af4d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71289
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current size of the cbmem buffer (128KB) is insufficient to contain the
complete debug log causing the cbmem console buffer to wrap.
This patch increases cbmem buffer size to 256KB so that the complete
debug log can be stored in it.
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Change-Id: I2099386dd87a010c3a5937bd896620270f587b1c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71288
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
EBG (Emmitsburg) PCH is used in Intel SPR-SP chipset.
Its datasheet is Intel doc# 606161.
Add Intel Emmitsburg PCH GPIO pin definitions.
Also common code change is made to support Intel Emmitsburg PCH:
a. Instead of 2 PAD registers per GPIO, it has 4 PAD registers.
b. The register address space may not be contiguous from one GPIO
group to the next GPIO group.
Change-Id: Ia0d9179544020b6abb0be1ecd275a9a46356db8a
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This patch implements a new API to make the UFS controller function
disabled. Additionally, perform a warm reset post disabling the UFS
controller to let PMC know about the state of the UFS controller
and disable the MPHY clock.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
From the AP log, I am able to confirm that UFS is function disabled
using PSF.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I940a634f70f8c97ef1234866d4c5a1ff224c6e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch makes it easy for OEMs to keep a unified AP firmware image
to boot different SKUs with UFS and non-UFS as boot media.
With a unified image while booting on non-UFS SKU is exhibiting S0ix
failure due to UFS remain enabled in the strap although FSP-S is
making the UFS controller function disabled.
The potential root cause of this behaviour is although the UFS
controller is function disabled but MPHY clock is still in active
state.
A possible solution to this problem is to issue a warm reboot (if
boot path is S5->S0 or G3->S0) after disabling the UFS and let PMC
read the function disable state of the UFS for disabling the MPHY
clock.
Mainboard users with such board design where OEM would like to use
an unified AP firmware to support both UFS and non-UFS sku booting
might need to choose this config to allow disabling UFS while booting
on the non-UFS SKU.
Note: selection of this config would introduce an additional warm
reset in cold-reset scenarios due to function disabling of the UFS
controller.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a811d8f4aad41dab6f8988329eaa1d590a4637a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch calls into `pmc_clear_pmcon_pwr_failure_sts()` to clear
GEN_PMCON_x register status bits after determining the
`prev_sleep_state`.
Having those bits being set across reboot might be misleading.
For example: although the last boot was not due to power failure but
the power failure bit still remains the same (unless cleared).
Note: clearing `GBL_RST_STS` bit earlier than FSP-M/MRC having an
adverse effect on the PMC sleep type register which results in
calculating wrong `prev_sleep_state` post a global reset, hence,
just clearing the power failure status bits rather than clearing
the complete PMC PMCON_A register.
BUG=b:265939425
TEST=Able to clear the GEN_PMCON_A register power failure bits aka
BIT16 and BIT14 on google/marasov platform over next boot to avoid
having its persistent effect.
Without this patch:
pm1_sts: 0100 pm1_en: 0000 pm1_cnt: 00001c00
...
GEN_PMCON: d0215238 00002200
With this patch:
pm1_sts: 0100 pm1_en: 0000 pm1_cnt: 00001c00
...
GEN_PMCON: d1001038 00002200
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f5dfe0251aeb85b667fbfc44fbf17b025aec090
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be
able to train memory (DIMM) at different frequencies.
On all latest Intel based platforms SaGv is expected to be enabled
to support dynamic switching of memory operating frequency.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7cf52b966c1355c1f2bd4ae7c256fa4252a90666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
This patch converts below chip configs from camel case to snake
case to match with the other chip configs belongs to the chip
structure.
- SaGv
- RMT
Additionally, updated the `sagv` help text and operation as
applicable based on the FSPMUPD.h file (belongs to the vendorcode).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I62e521cf3f46e888e2c995d83ac7dc666de1af82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
This patch implements an API named `pmc_clear_pmcon_pwr_failure_sts()`
to clear power failure status bits of PMC General PM Configuration A/B
based on the underlying SoC.
Based on the available PMC register definitions between Sky Lake till
latest Meteor Lake platform, the SoC platform that selects
SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION config has power failure bits
mapped into the MMIO mapped GEN_PMCON_A register where else for the
other SoCs, those power failure bits are belongs to the PCI config
space mapped GEN_PMCON_B register.
BUG=b:265939425
TEST=Able to build the google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icbbe47ccfd489edf9c38f52bdf7cf2de7aa9eedf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72053
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Some boards may want to perform a specific operation before the CSE FW
update final operation begins. For instance, on Brya this new callback
can be used to inform the end-user that an update is in progress.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=Compilation success
Change-Id: Ia4d32a71f3ae61d2e24197fee6b458512f7778a9
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72097
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If a CSE update is going to happen and early graphics is supported by
the mainboard, an on-screen text message is displayed to inform the
end user.
CSE update can take a while and an impatient end user facing a black
screen for a while may reset the device unnecessarily.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=On screen text message during CSE update observed on skolas
Change-Id: I28c4fef9345d577be287b76a2a767b5c852ec742
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72098
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 78ee4889dc ("soc/amd/cezanne/acpi: Add support for RTC
workaround") added a workaround for the Cezanne silicon. This was copied
to the Mendocino code, but from both the discussion in b:209705576 and
the referenced amd_pmc_verify_czn_rtc function in drivers/platform/x86/
amd/pmc.c that is only called if pdev->cpu_id == AMD_CPU_ID_CZN is true
Mendocino doesn't need that workaround, so remove it.
TEST=Running suspend_stress_test -c 5 on Chausie shows no errors
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7d0b35ef8cf88ff0b9bed8820b8da32c2058cc1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72091
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 80b1fa33.
Reason for revert:
"Error: CONFIG() used on unknown value (ENABLE_FSP_ERROR_INFO) at src/soc/intel/xeon_sp/romstage.c:20"
Change-Id: I843322fc9d7ebbc30e9209ae933313f2668bfa40
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch fixes the build failure with 'make -j' where the build
fails at "$(MAKE)... savedefconfig" as that rule doesn't have the
dependency on kconfig/conf.
Normally make takes care of all dependencies, so parallel builds
work well. However if you have recursive make calls, i.e. make
calling make like in these recipes, there is no single make with a
global view of the dependencies anymore, and then multiple "makes"
can try to build the same file concurrently. Adding that explicit
dependency on build/util/kconfig/conf makes sure the recursive make
is only called later when the top-level make already finished
building build/util/kconfig/conf.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Id44ab44618b0ddfb3c2472c469499429118bf76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72070
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Provide D-states to enter LPM (S0ix) for MTL
Values were copied over from corresponding ADL file (as MTL data
sheet is not yet available).
TEST=Built and tested on Rex by verifying SSDT contents
Change-Id: If367511a29726669fe25ad2124e2f9b877a31ee8
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I3138edd8125601b6c9dff5f9252a4bba8385146d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
RAID_MISC_ROM_FILE isn't used and there isn't "misc.bin" file.
Change-Id: I4007537ee2d177010f04f733e8a9b7167b0fce73
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
RAID_ROM_FILE isn't used and there isn't "raid.bin" file.
Change-Id: I056c122289f05d662b1b1e5a8cdc0c73915f7249
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For SPR-SP FSP MRC cache, NO_FSP_TEMP_RAM_EXIT should not
be selected.
Change-Id: I63101f286809d6cebb9a7d74443446cb3fe650c4
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71928
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
After calling FSP MemoryInit API, if there is an error, some FSPs
(such as SPR-SP FSP) is capable of generating FSP_ERROR_INFO_HOB.
Check existence of such a HOB and handle it accordingly.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I612393ffac90815606f3f2544bc1518f6912e605
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71952
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
MAINBOARD_BLOBS_DIR is defined the same way by
picasso/cezanne/mendocino/phoenix/glinda and unused by stoneyridge, so
move it to a common area.
This makefile variable is currently only used to locate APCB blobs for
the different mainboards.
Add a Kconfig option to point to the APCB blobs directory. This allows
simple overriding to locations such as site-local.
TEST=Timeless builds
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I0702fdb97fbc2c73d97994ab4d5161ff0f467518
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69410
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The dir_location and efs_location have the same meaning. Now the dir
means body.
Change-Id: I02d4dc848f189449b6f0a1eea5cd6b8020a7d101
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Because the EFS is now fixed at 0xff020000, the ChromeOS RO region needs
to be moved to the bottom of the ROM area to cover that space.
The RO Region 6MiB, but you can't actually set 6MiB as RO - it's either
4 or 8MiB, so that's adjusted. To leave some room for the RW_LEGACY
region, the two RW regions are adjusted to 3MiB each, which should be
plenty.
The GBB region had to be moved from the front of the WP_RO region to the
end to avoid conflicting with the EFS, which needs to be inside the
coreboot cbfs area.
Also get rid of AMD_FWM_POSITION_INDEX. The FWM position is no longer
needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I683155ec0f4e6a62d862b9e2fa76af45f4cd5493
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Update the mem_parts_used.txt, generate Makefile.inc and
dram_id.generated.txt for this part.
DRAM Part Name ID to assign
MT62F1G32D2DS-026 WT:B 4 (0100)
K3KL8L80CM-MGCT 4 (0100)
H58G56BK7BX068 4 (0100)
BUG=b:259467147
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I204e871129a1b15d7c373d579e10a7b9ab6deabe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71906
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
To make the code slightly easier to read, add a comment about the scope
to the #endif of the outer #ifdef block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic2bc83c77750cd8a509f4755fdfa4daaf082d754
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Needs to be selected for ChromeOS mainboards even for non-ChromeOS
builds, else Thunderbolt/USB4 doesn't work under Windows (and likely
Linux as well).
TEST=build/boot Windows on drobit/banshee, verify TB functional
Change-Id: Iee3f99840f0c6cc384d9fdef6dff55bcbfc0380f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Possible Buffer Overflow - Array Index Out of Bounds. Array
regions size is 256 but 'i' iterates from 0 to 256.
Found-by: Klockwork
BUG=None
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee45a5821b9dd3f9e6f9816599beebf34555426d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72049
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the unused fields that were previously used for PCNT and PWRS.
The LIDS field is only used in the ACPI code, but keep if for now, since
it would require a bigger rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b172214998818f841f5694f47815eddfaf9deaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72139
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the unused fields that were previously used for PCNT and PWRS.
The LIDS field is only used in the ACPI code, but keep if for now, since
it would require a bigger rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79509146431e4584e50af4477f3f50dc3cf01bcf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72138
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 197d550d06.
Reason for revert: breaks TBT and TypeC display on Brya0
Bug=265375098
Branch=firmware-brya-14505.B
Test=Build and boot Skolas board with Brya0 image. Test TBT
and TypeC display functionality.
Change-Id: Ia0283b023949476e90edff7151d605fa36331bfd
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72081
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the APL EDS vol 1 (doc 569262) to be able to implement common
code API to clear the power failure status bits.
Note: as per the EDS those newly added power management failure bits
are RO and shouldn't change any functionality of the existing APL SoC
code. The reason behind adding those macro definitions is to fix the
compilation issue due to code change targeted for the Intel SKL and
Xeon-SP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0bbf11ada2b2f8735173be69ad157b8055021126
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72130
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the DNV EDS vol (doc 558579) to be able to implement common
code API to clear the power failure status bits.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6ed962eae79154a8faea382dbe8367133cb05eda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Enable early POST code display on this variant using
the common mc_apl1 baseboard functionality.
BUG=none
TEST=Boot on mc_apl6 and observe that POST codes are
displayed before DRAM training.
Change-Id: I2a52c241c383f8ebcf05052e9bc0ba13e63e3728
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Move logic previously used only in the mc_apl2 variant to
the mainboard level so that other variants can also make
use of it without code duplication.
This functionality on the mc_apl6 variant will be enabled
in a follow-up patch.
BUG=none
TEST=Boot on siemens/mc_apl2 and observe that the POST
codes are displayed before DRAM training.
Change-Id: I762e328ad06c047d911ce1fc40f12a66cbd14e11
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Remove AHCI_ROM_FILE since it's not used and there is no ahci.bin file.
Change-Id: I008c6ac78957500d4ce301fe70f5b6d4a549b573
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Change-Id: Ib5ff87e2f6524ca1be69027080149a3fbe2df7d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72158
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Change-Id: I9a55e1b099a53180e40eedcc52120d65558e7f8b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72157
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Felix Held