Akemi unused devices declare:
- I2C #1 gpio_keys
- close I2C #3
- close GSPO #1
BUG=b:142800988
TEST=Reboot stress test and suspend stress test, the DUT will be
able to working properly
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ibff1446ccb213abce1a2ae19718774d9d6737cc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36086
Reviewed-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The change applies the DPTF parameters.
BUG=b:142849037
TEST=build and verified by thermal team
Change-Id: I5da8d373f38d23929ffec95bc1c9e942f131297f
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Chrome OS firmware images have moved bitmap resources from GBB into CBFS
for a long time, so the GBB should only hold firmware keys and HWID,
that is usually less than 10k.
ARM boards usually limit GBB to 0x2f00 (see gru, cheza and kukui) but
many recent x86 simply copy from old settings and may run out of space
when we want to add more resources, for example EC RO software sync.
Note, changing the GBB section (inside RO) implies RO update,
so this change *must not* be cherry-picked back to old firmware
branches if some devices were already shipped.
BRANCH=none
BUG=None
TEST=make # board=darllion,hatch,kahlee,octopus,sarien
Change-Id: I615cd7b53b556019f2d54d0df7ac2723d36ee6cf
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tune I2C bus 1 clock and insure it meets I2C spec.
BUG=b:142683257
TEST==flash coreboot to the DUT and measure I2C bus 1 clock
frequency less than 400KHz
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Id4cdbad4dd9d451763fb536988402d6e6fe3a378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Update power sequence to meet spec.
BUG=b:142710867
TEST=touchscreen work, and make sure power sequence to meet
spec with vendor.
Change-Id: I98f8b095374caa8c3540307a51f9d3b69baec905
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36060
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable wifi sar feature and set wifi sar name for dragonair sku.
BUG=b:142109545
TEST=emerge-hatch coreboot chromeos-bootimage
1. Check wifi_sar-dragonair.hex in /cbfs-rw-raw/dratini
2. Add iwlwifi.debug into kernel params.
3. check SAR value from dmesg only when sku id is 21/22
Change-Id: I0e08610b7c7d2d8da5a749d278bcde26af590e31
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The next board rev will have a new option for an Elan touchscreen. Add
support for this in the devicetree, as well as use the 'probed' property
on both touchscreen options.
BUG=b:141957731
BRANCH=none
TEST=compiles (next board rev not available yet)
Change-Id: I135e693304cbb8dffc0caf4c07846033d6802208
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
FreeBSD's sh (basic posix shell) did not interpret the '\%o' escape
in the same way bash/zsh do. As a result, the decoded files ended up
with ASCII numbers instead of the decoded binary data.
Change-Id: I95b414d959e5cd4479fcf100adcf390562032c68
Signed-off-by: Greg V <greg@unrelenting.technology>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Applying reset_gpio config of stylus for kohaku. GPP_A19 has been assigned in
the latest schematics.
We would keep GPP_A10 as output high for old revision devices temporarily.
BUG=b:141914474
BRANCH=none
TEST=verified stylus works internally
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: I61f0f9a4378f47bf455f0726d44beeaf2f67197b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Add PRESERVE to UNIFIED_MRC_CACHE so that we don't retain the memory
training data upon a FW update unless we need to. We have had users
complaining that a 15 second memory training upon update makes them
believe that their device is not booting, thus many of them hard
resetting before bootup.
BUG=b:142084637
BRANCH=None
TEST=flash RW_SECTION_A, RW_SECTION_B, and WP_RO sections and make
sure memory training doesn't occur on following bootup.
Change-Id: Ia5eb228b1f665a8371982544723dab3dfc40d401
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35803
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Previously all boards using eSPI for the Chrome EC just called it
LPC as the code for the chrome EC is the same between the two
busses.
I'm adding a new Kconfig symbol to specify eSPI, so switch the
boards that actually use eSPI to that symbol and add the LPC
symbol to all the others.
The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default
to enabled for x86 platforms, so one symbol or the other needs to be
specified for each platform.
BUG=b:140055300
TEST=Build tested only.
Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The previously provided device path made no difference, all
integrated PCI devices point back to the same chip_info
structure.
Change reduces the exposure of various SA_DEVFN_xx and
PCH_DEVFN_xx from (ugly) soc/pci_devs.h.
Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The CONFIG_GBB_HWID can be generated automatically now so we can remove
the test-only HWIDs set in board config files.
BUG=b:140067412
TEST=Built few boards (kukui, cheza, octopus) and checked HWID:
futility gbb -g coreboot.rom
Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify IRQ pin from D21 to A21 and support wake-up from touchpad
BUG=b:141519690
TEST=build bios and verify elan touchpad works fine
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6cc5b780ffcee24f1f2a04e88c30628ceb5904e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35551
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All variants of hatch are using Comet Lake and so the selection can be
done in Kconfig without requiring each variant to do the same.
Change-Id: Ief34296334ede5ba0f5f13381e92427ccc440707
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Andrew McRae <amcrae@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
BUG=b:140545732
TEST=build bios and spd index set to 6, verify DUT bring up normally
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A closer read of the EDS indicates that when GPIO Driver mode is
selected, GPIO input event updates are limited to GPI_STS only.
GPI_GPE_STS updates are therefore masked, and we don't want to enable
this behavior. It masks the GPE and does not allow us to see this GPE
as a wake source, obscuring the reason that the system woke up.
Also switch the IRQ from level-triggered to edge-triggered,
otherwise the system will auto-wake from any sleep state when the
pen is ejected from the garage.
BUG=b:132981083
BRANCH=none
TEST=Wake up system from S0ix using pen eject, verify that mosys
eventlog shows GPE#8 as the S0ix wakeup source. Wake up system from S3
via pen eject, and verify that the wakeup source shows as GPE#8.
Change-Id: If017e12e23134f5cfed7cbb6047cc9badd9bf7e8
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35459
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add DPTF based thermal control for ambient sensor for CML based
Helios system. Also, update other sensor names information.
BUG=b:139335207
BRANCH=None
TEST=Build and Boot on Helios board and check all sensor details.
Change-Id: I322d53536fbdf6db70f5a24afb322d9f206eaeac
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Update DPTF thermal temperature threshold values for CML based
Helios system. This updates CPU active cooling temperature
threshold to appropriate values which addresses the issue of
running the Fan at lower CPU temperature as per bug.
Also, added active cooling temperature thresholds for other
TSR sensors.
BUG=b:141087272
BRANCH=None
TEST=Build and boot on Helios board to check the fan functionality.
Change-Id: I5c8502f8c9e6121c18024d2a8d5a4f7680797b8d
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35446
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change overrides USB port settings for kohaku.
Some port settings are same with baseboard, but I'd like to describe all
settings here to be aware of current setting and usage of USB ports on
kohaku.
BUG=none
BRANCH=none
TEST=built and measured SI of USB ports internally
Change-Id: I5ac05485d1cd94416e5a0aecf7fa6769bd7c9e84
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Even though GT7375P programming guide rev0.4 only requires a reset delay
of 120ms, in practice, we have to increase the reset delay to 500ms, or
Goodix FW update would fail.
This is a workaround. In the long run, we hope Goodix can fix the power
sequence in touch firmware.
BUG=b:138795891, b:138796844
TEST=boot helios board and verify Goodix FW update succeeded
Signed-off-by: Philip Chen <philipchen@google.com>
Change-Id: Ic0049bf240de0a1c7f1b1f39bf155d48bb76fb86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35350
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
pull in the FPU VDDIO turn on to fix the power leakage problem
on FPU VDDIO and FPU CS during power on sequence.
BUG=b:138638571
BRANCH=none
TEST=emerge-hatch coreboot chromeos-bootimage
Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I3f6bf3676922e987c2e282b697a2333e2d90289e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1. SKU1 for eMMC
2. SKU2 for SSD
BUG=b:140008849, b:140573677
TEST=Verify SSD is disabled when SKU ID = 2/4/21/22
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I827e6f1420801d43e0eb4708b8b8ad1692ef7e9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35204
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per GT7375P programming guide rev0.4, we want to enforce a delay
of 120ms after the reset is completed, before HID_I2C starts.
BUG=b:140276418
Signed-off-by: Philip Chen <philipchen@google.com>
Change-Id: Id69a9db996bcd9001ef850c50898fbd55327b4df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Enable acoustic noise mitgation for hatch platform, the slow slew rates
are fast time dived by 8 and disable Fast PKG C State Ramp(IA, GT, SA).
BUG=b:131779678
TEST=waveform test and reduce the noise level.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I49e834825b3f1e5bf02f9523d7caa93b544c9d17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35005
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
During boot sequence sometime touchscreen reset keeps failing. Also, kernel
dmesg shows "dmesg:i2c_hid i2c-GDIX0000:00: failed to reset device" message.
This adds around 4 more seconds to the boot sequence. Setting the appropriate
delay of 120ms between enable and reset for Goodix Touchscreen helps to
synchronize and address this failure. This value is 120 ms as per Goodix Spec.
BUG=b:138413748
BRANCH=None
TEST=Built and tested on Hatch system
Change-Id: I15005c568f285ec7bad9a0bec4498e2fdd20782b
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34626
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
New emmc DLL values for Kindred
BUG=b:136784418
BRANCH=none
TEST=Boot to OS 100 times on Kindred proto 1 board.
Change-Id: I52acb445c47fcdb9b60512dd501d810b1ae4dc10
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35041
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the next board version, we will use GPP_D9 as enable control for touch
screen.
BUG=b:137133946
TEST=build
Change-Id: I213d0878bfca1ce4059ec0393f59d8e79e1b274c
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
sx9310 and FPMCU are not used in Kindred.
BUG=none
TEST=build
Change-Id: Ied09d4bdb899d991131a75d7c848ff8637022f53
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Level trigger is recommended setting for touchscreen interrupt of
kohaku, so we would change it as the recommedation.
BUG=b:139179200
BRANCH=none
TEST=Verified touchscreen works on kohaku
Change-Id: Ibbcdbe3ab555d014048f66ff527e539c5b566187
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
