Change-Id: If4d57c7898c0de20035533dccd4554f45a71d5d1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14525
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
During receiver enable cycle training on Family 15h the entire range
of possible delays is searched, even though the single passing window
is often found nearly immediately. Skip the remainder of the delay
range after the passing window has been located.
Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14544
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
During DQS receiver enable cycle training on Family 15h platforms the
read data timing registers were inadvertently set to zero on every
lane training attempt.
Ensure that the read data timing registers are correctly set after
each lane is trained in receiver enable cycle training. This allows
more than one RDIMM to function on a given DCT channel.
Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9
Tested-On: ASUS KGPE-D16
Tested-With: 1x Opteron 6262HE
Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1)
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14543
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The existing Family 15h receiver enable training code stored
temporary delay values in the wrong variables, leading to
the requisite averaging of delays across nibbles not being
applied. This in turn made x4 DIMMs less stable than they
should have been.
Store temporary nibble delay values in a dedicated array.
Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14541
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Remove the platform_bus_table routine and replace it with a link time
table. This allows the handlers to be spread across multiple modules
without any one module knowing about all of the handlers.
Establish number ranges for both the SOC and mainboard.
TEST=Build and run on Galileo Gen2
Change-Id: I0823d443d3352f31ba7fa20845bbf550b585c86f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14554
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add xor support which enables toggling of a bit:
* REG_SCRIPT_COMMAND_RXW enum value
* REG_*_RXW* macros to support using REG_SCRIPT_COMMAND_RXW
* REG_*_XOR* macros to support using REG_SCRIPT_COMMAND_RXW
* reg_script_rxw routine to perform and/xor operation
* case in reg_script_run_step to call reg_script_rxw
TEST=Build and run on Galileo Gen2
Change-Id: I50a492c7c2643df5dc2d2fa7113e3722c1e480c7
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14495
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The pad for CS2 of the Fast SPI interface needs to be configured for
automatic MMIO translation when a SPI TPM is utilized. Instead of
unconditionally configuring that pad under LPC_TPM provide a explicit
Kconfig for a mainboard to select.
Change-Id: Ia94b90e12d71a4b849359188a853f7e036cc583b
Signed-off-by: Aaron Durbin <adurbin@chormium.org>
Reviewed-on: https://review.coreboot.org/14531
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
Fix regression introduced by:
Ib48fe8380446846df17d37b22968f7d4fd6b9b13
Don't run channel_test on S3 resume as it overrides memory
that might be in use.
Fixes MCE events reported by the GNU/Linux kernel that
low memory has been modified.
Reset on failed s3 resume.
Change-Id: Ibadea286619c7906225f86a93aaa0b4caf26cabe
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/14439
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add new mainboard for MC BDX1 board which is based on Intel Camelback
Mountain. This mainboard is an industry type board and has several
Ethernet interfaces among with two USB3.0 connectors. It uses 24V DC
power supply and has its own form factor which does not match any
standard.
This commit adds the new mainboard and prepares the Kconfig
environment so that this board can be selected and generated.
Although the generated image can boot into Linux and DOS,
not all functions are implemented yet.
Forthcoming commits will add more functionality.
Change-Id: I29011cfd3b0d13bcf163223f657e02f69978e39a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14516
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
DIMM training can sporadically fail due to external influences or various
errata. In these cases, restarting to retry training is a more appropriate
response than halting the system and requiring manual intervention.
Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14529
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
To include gfx.c in ramstage, there is a Kconfig option
(FSP_BAYTRAIL_GFX_INIT) which can be activated on demand.
Unfortunately, the "$"-character is missing so that this switch is
never active.
Change-Id: I0c3c562b3caca53ac6510c2c5dc30e7f606f5ad0
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14532
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Switch all types to uint8_t and the like instead of u8.
Change-Id: Ia12c4ee9e21e2d3166c2f895c819357fa2ed9a94
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14515
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Use hwilib in vendorcode/siemens/hwilib to get fields from hwinfo
instead of having mainboard specific hwinfo code.
This patch does not change the functional behavior in any way.
Change-Id: Idb226a82a08b1b753f654c5cde106236e72f33c3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14506
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add a library which unifies access to Siemens specific hardware information
data. This library is meant to be used with Siemens platforms and can be
selected in Kconfig. The needed source of information has to be present
in cbfs.
This lib can be used in romstage and ramstage.
Change-Id: I2c6e003b0c123b4cf6a84906c2b133b8c38c8b1a
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14505
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add GPIO controller in ACPI device description.
GPIO controller driver is probed in kernel and all
the pins in the banks are showing respective values.
Change-Id: I0512cfec872113b15fd204ec3b95efeac87f694a
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/14478
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable caching of BIOS region with variable MTRR. This is most
useful if enabled early such as in bootblock.
Change-Id: I39f33ca43f06fce26d1d48e706c97f097e3c10f1
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14480
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Move _CRS scope from MCHC device only to whole pci root bus. Otherwise
ACPI will not able to assign resource to devices other than MCHC.
Change-Id: Iaa294c63e03a4fc6644f1be5d69ab3de077e6cc3
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14477
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
One of devices connected to FAST SPI bus is TPM. SoC uses dedicated
line for chip select for TPM function. If TPM is used, that line needs
to be configured to a specific native funciton.
Change-Id: Ib5bf4c759adf9656f7b34540d4fc924945d27a97
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14467
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Without ACPI PCI IRQ definitions kernel is left only with informaiton
available in PCI config space, which is not sufficient.
Change-Id: I3854781049851b5aa5b2dbf3257ece2fee76c3e2
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Memtest86+ was pulling origin/master which will change over time. This
adds a commit-id as a stable version to allow it to be reproducible.
The other secondary payloads, coreinfo and nvramcui, do not need this
because they are part of the coreboot repo and not fetched from an
external source.
Change-Id: I20c516010f76cf03342bd8883d0ee7ac5f8bc7e4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14520
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This series of patches attempts to update all of the external payload
makefiles to be as similar as possible.
- Add .git to the git repo URL to show that it's a git repo.
- Use the common checkout, fetch, and clone ($(project dir)) targets
- Add TAG-y and NAME-y variables - just with origin/master for now.
Stable will be added shortly.
- Make sure all phony targets are in .PHONY
Change-Id: If83c100841d5f91a9fab7ac44ba20ec2271c0594
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14152
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Test results under 16 days old display with an incorrect background color
due to the leading zero not being preset in the associated HTML color code.
Add the leading zero where needed to generate a valid HTML color code.
Change-Id: I0dfe29ec1afc409a4908073922ac31a4091f0f1f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14514
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The existing memory test routine was insufficient to detect certain types
of bus instability related to multiple incompatible RDIMMs on one channel.
Add a PRNG second stage test to the memory test routine. This second stage
test reliably detects faults in memory setup for RDIMM configurations that
also fail under the proprietary BIOS.
Change-Id: I44721447ce4c2b728d4a8f328ad1a3eb8f324d3d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14502
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The wrong DIMM number was used in the initial non-target MRS
setup routines. This had no functional impact other than to
print the wrong DIMM number in the DDR3 verbose debug output.
Change-Id: I480118ed00e1786a06e641a56f0fb19cd87f92eb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14501
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
The existing RDIMM RC control word send routines were a hodgepodge
of various AGESA chunks with different ways of handling the same
task. Unify the control word chip select setup, use precise timing
routines on Family 15h, fix a couple of incorrect masks, and add
additional debugging statements.
It is believed that this patch is cosmetic and does not significantly
alter existing functionality.
Change-Id: Ie4ec7b6a7be7fce09e89f9eec146cc98b15b6160
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14500
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Decode each cbfs_payload_segment into native byte order during
segments iteration.
Note :
List ordering has been changed, segments are now always inserted
at the end.
cbfs_serialized.h PAYLOAD_SEGMENT definitions have been changed
to their standard order (big-endian).
Change-Id: Icb3c6a7da2d253685a3bc157bc7f5a51183c9652
Signed-off-by: George Trudeau <george.trudeau@usherbrooke.ca>
Reviewed-on: https://review.coreboot.org/14294
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When more than one DIMM is installed on a DCT, only the first DIMM
delay values are scaled to the new memory clock frequency after a
memory clock change during write leveling.
Store the previous memory clock of each DIMM during write leveling
to ensure that every DIMM has its delay values rescaled.
Change-Id: I56e816d3d3256925598219d92783246f5f4ab567
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14479
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
A major issue with the board-status Wiki page is that it shows all
test results equally regardless of age. As a test result ages it
becomes more likely that the board no longer works peroperly under
coreboot due to code churn.
Visually indicate board-test status "at a glance" by smoothly fading
the background color of the test result from green to yellow as the
test result ages. This patch sets the full yellow transition to 255
days after test for programming convenience, however the number of
days required to fully "stale" a test result could be modified
relatively easily.
Change-Id: I5a076a6cc17d53fda8e4681e38074fc1f46c0e12
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14457
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
Add 'nvramcui' target to make it easier to build and test.
Put both nvramcui & coreinfo targets into .PHONY because they
both exist as directories.
Change-Id: I9cf76785e69f3c8e47fe92f1b1648fd0f7a63c3e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14481
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This is in response to issue #28: board-status should reject duplicate
uploads.
Change-Id: Iff99be154b35e8c0f9f05f9470d1c2dcff8510b8
Signed-off-by: Huimin Zhang <thehobn@gmail.com>
Reviewed-on: https://review.coreboot.org/14187
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On Mac OS X hdestroy seems to overwrite node->name. Hence
duplicate the string before stuffing it into the hash search
table.
Change-Id: Ieac2025f5c960cdb8d509dde7e92ba0dd32644b0
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14443
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The previous commit removed Kconfig, but not Makefile.inc
Change-Id: If46a0a3e253eea9d286d8ab3b1a6ab67ef678ee4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14419
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Remove offset override improperly added in the "Disable the ROM shadow"
patch
TEST=Build and run on Galileo Gen2
Change-Id: I32fb2da48e3769d59a49619539053f9afdf63b04
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
After substantial testing it has been determined that it is neither
required nor safe to disable the DRAM MCA during initial startup.
This (mostly) reverts commit c094d99611.
The minor debugging enhancements from that commit were left in place.
Tested-On: ASUS KGPE-D16
Config-CPU: 1x Opteron 6262HE
Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1
Config-RAM: 1x Kingston 9965516-483.A00LF
Change-Id: I58fcc296b8c45ecaedf540951c365e4ce52baaf5
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14446
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Certain RDIMMs have inherently large write levelling delays,
in some cases exceeding 1.5 MEMCLK. When these DIMMs are
utilized, the phase recovery system requires special handling
due to the resultant offset exceeding the phase recovery reporting
capabilities.
Fix an old error where delays > 1.5 MEMCLK were not being programmed
(gross delay high bit was not in set range), and restore special
delay handling for delays greater than 1.5 MEMCLK.
Also enhance debugging for x4 DIMMs around the affected code.
Tested-On: ASUS KGPE-D16
Config-CPU: 1x Opteron 6262HE
Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1
Change-Id: I0fb5454c4d5a9f308cc735597607f095fe9188db
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/14441
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Jonathan Neuschäfer