This shortens the use of sdram_params variable names to params.
No functional changes.
Signed-off-by: Moritz Fischer <moritzf@google.com>
Change-Id: I122035078ce37fe65b16bb1f3a2b2d58956431aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50860
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds initial support for the Pine64 ROCKPro64 board.
The ROCKPro64 (http://pine64.org/rockpro64) is a SBC using the
RK3399 SoC with up to 4GB LPDDR4.
So far only the bootblock part works, the romstage starts to execute,
though.
For ramstage to work we'll need to port some of the changes required
for LPDDR4 vs LPDDR3. This will be addressed in follow up changes.
UART2 on the PI-2 connector can be used as a coreboot console.
GND is pin 6
TXD is pin 8
RXD is pin 10
Flashing:
I used an OpenWRT nightly for the ROCKPro64 and its builtin tool.
$ mtd write coreboot.rom /dev/mtd0
Recovering from a bad flash:
To recover from a bad flash bridging pins 23 and 25 on the PI-2
connector will make the board boot from SD card.
Signed-off-by: Moritz Fischer <moritzf@google.com>
Change-Id: I47d0031fff8ee10b11ad74935eaeb05f1f7eb4b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50625
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Calling data_fabric_write32 with BROADCAST_FABRIC_ID as instance_id
would have caused an infinite recursion, so call the right function
data_fabric_broadcast_write32 for that case instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If7f0a80f0430e8bfb29ee510ef86c278e3a42063
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
It's not used, and GPIO registers are on the southbridge.
Change-Id: I0b7b6edc22d461007f24618eca42091439a53d3c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45423
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Building with LLVM/clang (`COMPILER_LLVM_CLANG=y`), Debian clang version
11.0.1-2 fails due to unknown warning options.
error: unknown warning option '-Wlogical-op'; did you mean '-Wlong-long'? [-Werror,-Wunknown-warning-option]
error: unknown warning option '-Wduplicated-cond' [-Werror,-Wunknown-warning-option]
As these are GCC specific, only add them, when building with GCC (and
not scan-build).
Fixes: 04e0712f46 ("Treewide: Add some gcc's warning options")
Change-Id: I6190c1f3df97fb0be51f8dab7e1f5f2a033f5d86
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The 100 MHz reference clock seems to be unstable when using high
multipliers. Use the 133 MHz reference clock instead.
Change-Id: I400e4f91776306d54d818fa249d7a845020ac37b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45503
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The thing that this function initializes is the MPLL (Memory PLL). So,
call it by its name. Also add a missing newline in a printk, and update
a comment on the callsite of this function.
Tested on Asus P8Z77-V LX2, still boots.
Change-Id: I86ab643bc87253554346dfed3630eb9ddbd44eb3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Move this function into the compilation unit where it is called.
Change-Id: Ia4bdcd545827c2564430521a98246fc96bf0ba92
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50796
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Code was copy-pasted from older chips and has no effect on ibexpeak.
Change-Id: I3c5b2b8e4aa6211975c3e3dc1d64432886ef9352
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47864
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This write was copied from Sandy Bridge. Neither Haswell reference code
nor Broadwell perform this write. Therefore, it seems safe to remove it.
Change-Id: I8869ff3e66362d9910235c554c3a07e91f479a82
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46994
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This comment is useless, and was dropped from the tree in the past.
Change-Id: Ie46bf13ec27ff9cd9423795fc170cc7526e18122
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49124
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The register is 32 bits wide, so do not read 16 bits out of it.
LynxPoint PCH reference code version 1.9.1 always uses 32-bit accesses.
Change-Id: I18fbba0603579417e09ae4eb4eb273f7fcd903fc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47098
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
<endian.h> should never be included directly in commonlib files and
should instead be chain-included via <commonlib/bsd/sysincludes.h>.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ibc67ea97da36ec58738236ef22f961d9bbaf8574
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Attribute tags are defined as hexadecimal constants, not decimal, so it
makes more sense to print them like that in error messages as well.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3a5a6a8c9b8d24e57633595fc47221a483d8593a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
cbfstool has always had a CBFS_FILENAME_ALIGN that forces the filename
field to be aligned upwards to the next 16-byte boundary. This was
presumably done to align the file contents (which used to come
immediately after the filename field).
However, this hasn't really worked right ever since we introduced CBFS
attributes. Attributes come between the filename and the contents, so
what this code currently does is fill up the filename field with extra
NUL-bytes to the boundary, and then just put the attributes behind it
with whatever size they may be. The file contents don't end up with any
alignment guarantee and the filename field is just wasting space.
This patch removes the old FILENAME_ALIGN, and instead adds a new
alignment of 4 for the attributes. 4 seems like a reasonable alignment
to enforce since all existing attributes (with the exception of weird
edge cases with the padding attribute) already use sizes divisible by 4
anyway, and the common attribute header fields have a natural alignment
of 4. This means file contents will also have a minimum alignment
guarantee of 4 -- files requiring a larger guarantee can still be added
with the --alignment flag as usual.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I43f3906977094df87fdc283221d8971a6df01b53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In a rare placement edge case when adding a file with alignment
requirements, cbfstool may need to generate a CBFS header that's
slightly larger than it needs to be. The way we do this is by just
increasing the data offset field in the CBFS header until the data falls
to the desired value.
This approach works but it may confuse parsing code in the presence of
CBFS attributes. Normally, the whole area between the attribute offset
and the data offset is filled with valid attributes written back to
back, but when this header expansion occurs the attributes are followed
by some garbage data (usually 0xff). Parsers are resilient against this
but may show unexpected error messages.
This patch solves the problem by moving the attribute offset forwards
together with the data offset, so that the total area used for
attributes doesn't change. Instead, the filename field becomes the
expanded area, which is a closer match to how this worked when it was
originally implemented (before attributes existed) and is less confusing
for parsers since filenames are zero-terminated anyway.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I3dd503dd5c9e6c4be437f694a7f8993a57168c2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The *location argument to parse_elf_to_stage() is a relic from code all
the way back to 2009 where this function was still used to parse XIP
stages. Nowadays we have a separate parse_elf_to_xip_stage() for that,
so there is no need to heed XIP concerns here. Having a pointer to
represent the location in flash is absolutely irrelevant to a non-XIP
stage, and it is used incorrectly -- we just get lucky that no code path
in cbfstool can currently lead to that value being anything other than
0, otherwise the adjustment of data_start to be no lower than *location
could easily screw things up. This patch removes it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia7f850c0edd7536ed3bef643efaae7271599313d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Memlayout is a mechanism to define memory areas outside the normal
program segment constructed by the linker. Therefore, it generally
doesn't make sense to relocate memlayout symbols when the program is
relocated. They tend to refer to things that are always in one specific
spot, independent of where the program is loaded.
This hasn't really hurt us in the past because the use case we have for
rmodules (ramstage on x86) just happens to not really need to refer to
any memlayout-defined areas at the moment. But that use case may come up
in the future so it's still worth fixing.
This patch declares all memlayout-defined symbols as ABSOLUTE() in the
linker, which is then reflected in the symbol table of the generated
ELF. We can then use that distinction to have rmodtool skip them when
generating the relocation table for an rmodule. (Also rearrange rmodtool
a little to make the primary string table more easily accessible to the
rest of the code, so we can refer to symbol names in debug output.)
A similar problem can come up with userspace unit tests, but we cannot
modify the userspace relocation toolchain (and for unfortunate
historical reasons, it tries to relocate even absolute symbols). We'll
just disable PIC and make those binaries fully static to avoid that
issue.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ic51d9add3dc463495282b365c1b6d4a9bf11dbf2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This reverts commit 64d0ad347b. In the
current revision 3.001 of the PPR #56569 the register exists and the bit
definitions match.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie7a97843c3dac897f79f229b660b7e30b34eef93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
We were missing this, so we ran into the scope assert in
acpi_device_write_pci_dev for the data fabric PCI devices.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I566791527ba839ba52ec5fa28f0f6c25f547d1da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50815
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that all ACPI names are moved to the corresponding PCI devices, the
functionality in the chip code isn't needed any more.
TEST=No warnings or errors on coreboot console or in the Linux ACPI
parser.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d39b6d4bd53cd0ca189fb6f55ca26dab68793fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50822
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This function isn't used outside of the same compilation unit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I332046341bc7a5a499355f2147296e8c09d7e0ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50817
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang doesn't seem to get along with some of the symbol magic we use for
memlayout and throws -Winline-asm warnings. Since we want to be
compatible with as many host compilers as possible (within reason),
let's disable that warning.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If1d88ed0bb2d10acfadcf8dec74fa3d227e0f790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
We have adjusted allocation order such that GNVS is available
before ME hash needs to be stored.
Change-Id: I8428dd85f44935938a118a682767f2f8d6d539ab
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The allocation is for the OS. Just need to take care
in the firmware that ChromeOS GNVS is allocated first.
Change-Id: I16db41b31751d7b4a8a70e638602f3f537fe392e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50609
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both the IO-APIC and PIC mode PCI IRQ tables are incorrect for ADL; the
2nd field in each package is supposed to be pin, not function number,
and some of the IRQ #s differ from what the FSP programs, therefore
align the ACPI table to match what the FSP is currently programming.
BUG=b:180105941
TEST=boot brya, no more `GSI INT` or `failed to derive IRQ routing`
errors seen in dmesg
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I182be69e8d9ebd854ed74dbb69f4d1f1a539cf2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Bilby is the reference board for AMD Raven, Raven2 and Picasso APUs.
Bilby mainboard code is taken from mandolin variant Cereme.
These new files are a renamed copy and subsequent patches will be
applied to create a working bilby implementation.
Change-Id: I426966d782e259a971ec36bac2498bc62b4ce7e2
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
TEST=Boot majolica to linux and see IO-APIC logs
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 16, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib8094c3edf401659d9d740e2cc6266ddd5f91da9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since all bridges to the internal buses have the same PCI ID, we can
just add this one ID to the pci_driver struct and don't need to use a
list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice024b91f49f03995acbd8dfc8b33d3ae3559dde
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50804
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These files have windows line endings. Change to unix to match the
rest of the tree.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I5bb3338745a6a47b6714aa268d16866aada27790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enforcing the exact match of FSPS UPD block size between FSP and
coreboot mandates simultaneous updates to coreboot and FSP repos. Allow
coreboot to proceed if its UPD structure is smaller than FSP one. This
usually indicates that FSPS has an updated (larger) UPD structure which
should be soon matched/updated on the coreboot side to keep them in
sync.
While this is an undesirable situation that should be corrected
ASAP, it is safe from coreboot perspective. It is safe (as long as
default values in FSP UPD are sane enough to boot) because FSPS UPD
buffer is allocated on the heap with the size specified in FSPS
(larger) and filled with FSPS default values. This allows FSP UPD
changes to be submitted first followed by changes in coreboot repo.
Note that this only applies to the case when entire FSPS UPD structure
grows which should be rare as FSP should allocate enough reserve space,
anticipating future expansion, to keep the structure from growing when
new members are added.
BUG=b:171234996
BRANCH=Zork
TEST=build Trembyle
Change-Id: I557fd3a1f208b5b444ccf76e1552e74ecf4decad
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Without the cast the left shift is done on a 32 bit variable that gets
extended to 64 bits afterwards which results in missing MSBs. To avoid
this, do the cast to 64 bits before the left shift.
Found-by: Coverity CID 1443793, 1443794
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7cfa5b9b6ad71f36445ae2fa35140a8713288267
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The I2C EEPROM on SMBUS needs to be updated with the current board
layout, so that the BMC knows the actual configuration.
Collect all needed information and update the EEPROM if something
changed. Every byte written add a delay of 5 msec.
Change-Id: Ic8485e6c700eede75b1e829238ee70da65118ace
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Some (notably older Intel) boards use a tabular description of irq
routing that we want to keep pristine no matter what clang-format
considers correct (as that's ugly).
Change-Id: I259255a9f60208c659b658ecb81535e84a2aaa8c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This only makes sense if relocation via MSR is possible, to relocate
APs in parallel. xeon_sp hardware does not support these MSR.
TESTED: ocp/deltalake boots fine. SMM is relocated on CPU 0 just like
all other cores.
Change-Id: Ic45e6985093b8c9a1cee13c87bc0f09c77aaa0d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Enable Refresh2X to mitigate RAM corruption during long
(> 1hr) periods of S3/suspend, which leads to failure to
successfully resume from S3. Unknown if an issue with all
DRAM types, but tested w/Kingston KVR24S17D8 16GiB DDR4 SODIMMs.
Test: Build/boot Librem Mini v1/v2, put device in suspend,
wait > 1hr, ensure resume from S3 successful 100% of the time.
Change-Id: Ie8e3ebbb1ebdcd98813b5f36f580a235712d2f97
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50756
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `data->spd_len` option always needs to be initialised. However, it
did not get set when using a mixed memory topology. Correct this bug.
Fixes: commit 859ca18ced
Change-Id: I8a165f000e5d52e49de18d7648d02fe76d2dd296
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50786
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jakub Czapiga