Lindar/Lillipup uses the WIFI_SAR_ID field in FW_CONFIG to pick which
SAR table to load.
BUG=b:178302811
BRANCH=volteer
TEST=build and test no lindar/lillipup
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ibe829062033ba8246b9d9550cdcdc360f5f67dd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Add FW_CONFIG WIFI_SAR_ID fields in devicetree.
BUG=b:178302811
BRANCH=volteer
TEST=build and test on lindar/lillipup
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I7ec37b80ffca6924f1f0952dcfbc43c378a70923
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51386
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fleex will use SSFC to support RTL5682.
BUG=b:178653122
TEST=abuild
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icb06eabe297c5562bd2171b52cc9671c342e6dfd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Update GPP_A10 and GPP_H17 configuration to meet LTE power sequence
specification.
- FCPO (GPP_A10) should not turned off during warm reset.
BUG=b:177177967
BRANCH=dedede
TEST=Verified LTE power signal waveforms during powering on and off
Change-Id: I469f9c94ebd6bf2b68a0edc74f229158d82d0ef8
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
I was bugged by spurious "Failed to enable LTR" messages for years.
Looking at the the current algorithm, it is flawed in multiple ways:
* It looks like the author didn't know they implemented a
recursive algorithm (pciexp_enable_ltr()) inside another
recursive algorithm (pciexp_scan_bridge()). Thus, at every
tree level, everything is run again for the whole sub-
tree.
* LTR is enabled no matter if `.set_ltr_max_latencies` is
implemented or not. Leaving the endpoints' LTR settings
at 0: They are told to always report zero tolerance.
In theory, depending on the root-complex implementation,
this may result in higher power consumption than without
LTR messages.
* `.set_ltr_max_latencies` is only considered for the direct
parent of a device. Thus, even with it implemented, an
endpoint below a (non-root) bridge may suffer from the 0
settings as described above.
* Due to the double-recursive nature, LTR is enabled starting
with the endpoints, then moving up the tree, while the PCIe
spec tells us to do it in the exact opposite order.
With the current implementation of pciexp_scan_bridge(), it is
hard to hook anything in that runs for each device from top to
bottom. So the proposed solution still adds some redundancy:
First, for every device that uses pciexp_scan_bus(), we enable
LTR if possible (see below). Then, when returning from the bus-
scanning recursion, we enable LTR for every device and configure
the maximum latencies (if supported). The latter runs again on
all bridges, because it's hard to know if pciexp_scan_bus() was
used for them.
When to enable LTR:
* For all devices that implement `.set_ltr_max_latencies`.
* For all devices below a bridge that has it enabled already.
Change-Id: I2c5b8658f1fc8cec15e8b0824464c6fc9bee7e0e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51328
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since no board overrides the weak get_gpe_table function,
gpe_configure_sci wasn't called for any variant, so drop the function.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de204cc808449b625e1fa1e79fe653608e4b88a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
This change select the Kconfig to pre-allocate the Intel-recommended bus
and memory resources per-PCIe TBT root port for the adlrvp mainboard.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic56ebab02e50a466662a07d122d8f40eaf16b54b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51461
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change select the Kconfig to pre-allocate the Intel-recommended bus
and memory resources per-PCIe TBT root port for the brya0 mainboard.
TEST=snippet from dmesg logs shows the correct resources being allocated:
PCI: 00:07.0 resource base 27fc00000 size 1c000000 align 20 gran 20 limit 29bbfffff flags 60181202 index 24
PCI: 00:07.0 resource base 83000000 size c200000 align 20 gran 20 limit 8f1fffff flags 60080202 index 20
PCI: 00:07.1 resource base 29bc00000 size 1c000000 align 20 gran 20 limit 2b7bfffff flags 60181202 index 24
PCI: 00:07.1 resource base a0000000 size c200000 align 20 gran 20 limit ac1fffff flags 60080202 index 20
PCI: 00:07.2 resource base 2b7c00000 size 1c000000 align 20 gran 20 limit 2d3bfffff flags 60181202 index 24
PCI: 00:07.2 resource base ac200000 size c200000 align 20 gran 20 limit b83fffff flags 60080202 index 20
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6b520ae50f19a730263de7918594718f3b4b1c1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51455
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Intel ADL BIOS specification #627270 recommends reserving the
following resources for each PCIe TBT root port:
- 42 buses
- 192 MiB Non-prefetchable memory
- 448 MiB Prefetchable memory
Add a mainboard Kconfig which will auto-select these recommended values,
in addition to PCIEXP_HOTPLUG.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icdfa2688d69c2db0f98d0523d5aba42eec1824db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51460
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The _DSD is generated at runtime using the Intel common pcie
driver, therefore remove it from the ASL files.
BUG=b:182522802, b:182478306
TEST=boot into latest kernel, no thunderbolt driver errors
seen
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iee25a77bf5cc6636f46a5c32f3eeabe8524e0a04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51454
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The _DSD is generated at runtime using the Intel common USB4
driver, therefore remove it from the ASL files.
BUG=b:182522802, b:182478306
TEST=boot into latest kernel, no thunderbolt driver errors
seen
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I77dc283aeb5f52191255137e941487cf68cb7970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51453
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Done for consistency with other platforms. This also drops redundant S3
resume logging, as `southbridge_detect_s3_resume` already prints it.
Tested on Asrock B85M Pro4, still boots and still resumes from S3.
Change-Id: Id96c5aedad80702ebf343dd0a351fbd4e7b1c6c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The `HPET_ADDRESS` Kconfig option has the same value. Use it instead.
Change-Id: I268e949d4396aa20e38f719b36cc4e6226efe082
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This reverts commit 87a1bd696d.
Reason for revert: skin temperature is overheating due to boost time is too long
BUG=b:175364713
TEST=1. emerge-zork coreboot
2. run balance performance and skin temperature test => pass
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Change-Id: I31db06f4bcb986398e7bd2ac2858ffbedb257e2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
MT8192 devapc supports remapping domains.
There may be different domain bit for different subsys.
For example, domain bit in INFRA is 4-bit, while in MMSYS,
domain bit is 2-bit. For INFRA master to access MM registers,
the domain bit will change from 4 to 2 and need to be remapped.
In this patch we have remapped:
1. TINYSYS (3-bit to 4-bit)
- domain 3 to domain 3
- others to domain 15
2. MMSYS slave (4-bit to 2-bit)
- domain X to domain X, for X = 0 ~ 3
- others to domain 0
Change-Id: Id10a4c0bdf141cc76a386159896c861d0dc302aa
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
The SKU ID for Asurada should come from AP ADC channel 5 and 6.
BUG=None
TEST=make; boots on asurada
Change-Id: I6a00c555f20aca4cd7f8bcee46ee81c17ef6ca3c
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Move the initialization from bootblock to romstage for following reasons:
- Follow MT8183 initialization sequence.
- PMIC and RTC functions are only called after verstage.
- Reduce bootblock size.
- PMIC initialization setting is complex and may need to be changed by
an RW firmware update.
TEST=boot to kernel successfully
Change-Id: I3e4c3f918639590ffc73076450235771d06aae91
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xi Chen <xixi.chen@mediatek.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Updating from commit id 3b1a734:
2021-03-02 11:51:18 -0700 - (picasso: Update FSP to build 0x26)
to commit id 3a9d7cd:
2021-03-03 15:37:08 -0700 - (picasso: Update Dali SMU firmware)
This brings in 1 new commits.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iff3b4ff667f97d3804bc66477f8a95a60e23b1a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51459
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 4fdfa1c:
2021-03-05 13:10:22 -0600 - (mb/amd/majolica: Update to use proper APCBs built for Majolica)
to commit id fc2d4e2:
2021-03-12 10:31:48 -0700 - (mb/google/guybrush: Add initial APCB)
This brings in 1 new commit.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I3003fdb8ba0bcfbc33452999c35a9a21775ecc10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Let the linker do its job.
This fixes building with !CONFIG_PCIEXP_HOTPLUG on some platforms.
Change-Id: I46560722dcb5f1d902709e40b714ef092515b164
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The current values are actually for 32MiB and result in a brick if used
with a 16MiB chip because of the invalid bios region.
Change-Id: I08337394ce0d6e31e5c03cda2bfb3b9f0282f2c3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51322
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Picasso APUs advertise 23 MCA banks in the lower byte of the
IA32_MCG_CAP MSR, which is more than the 7 core MCA banks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3e1c8ed437820b350c78b0517e6521582002ee1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The bank names were copied over from Stoneyridge, but they don't match
for Picasso.
TEST=Checked the Picasso PPR.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia86cf3874f8b16b007bad46535af6dafb776fbdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51476
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without the boot template, u-root doesn't include any boot commands.
Booting other OS is impossible.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I7d0742d115715eb40e293e2a8711d1ff20d8970a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51331
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This enables the standard library method of adding SPDs to CBFS.
BUG=b:178715165
TEST=Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I2ec94fd866409e1dfa5cb65f6960ea07cbe22f2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51022
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add the option to build guybrush firmware with support for EM100.
This will assist in bringup of the new board.
BUG=b:180723776
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: I2246d2952f341cd8fff8fd486cf989cdb7929411
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51071
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since not all mainboards based on the Cezanne SoC have to support ACPI
resume, select this option in the mainboard's Kconfig and not in the
SoC's Kconfig.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I988276ccb5b61837d7f3f015d1d1aba783324b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Needed to get the _SX ASL methods.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6323ba413a21d9d867727dbb28340e6df807c86a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, `check-fmap-16mib-crossing` compares the offset and end of
each SPI flash region to 16MiB to ensure that no region is placed
across this 16MiB boundary from the start of SPI flash. What really
needs to be checked is that the region isn't placed across the 16MiB
boundary from the end of BIOS region. Thus, current check works only
if the SPI flash is 32MiB under the assumption that the BIOS region
is mapped at the top of SPI flash. However, this check will not work
if a flash part greater than 32MiB is used.
This change replaces the hardcoded boundary value of 16MiB with a
value calculated by subtracting 16MiB from the SPI flash size (if it
is greater than 16MiB). This calculated value is used as the boundary
that no region defined in the flashmap should be placed across.
The assumption here is that BIOS region is always placed at the top of
SPI flash. Hence, the standard decode window would be from
end_of_flash - 16M to end_of_flash (because end_of_flash =
end_of_bios_region). Currently, there is no consistency in the name
used for BIOS region in flashmap layout for boards in
coreboot. But all Intel-based boards (except APL and GLK) place BIOS
region at the end of SPI flash. Since APL and GLK do not support the
extended window, this check does not matter for these platforms.
Change-Id: Icff83e5bffacfd443c1c3fbc101675c4a6f75e24
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51359
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Perform some cosmetical changes:
* Override the first prerequisite so we can use `$<`.
* Add/remove whitspace to align things (recipe needs to be indented
by a single tab only).
* We can use shell variables inside double quotes. To make the
end of the variable name clear, use braces, e.g. "${x}".
NB. Most of the double quotes are unnecessary. They only change
the way the script would be failing in case of spurious whitespace.
* Break some lines doing multiple things at once.
* To reduce remaining clutter, put reading numbers into a shell
function.
And functional changes:
* No need to spawn `cat`, the shell can redirect input as well as
output (using `<`).
* To read a number from the `fmap_config.h`, we spawned 4 processes
where a single one can achieve the same. With one exception: GNU
awk refuses to parse hex numbers by default. Luckily, it turned
out that we don't need intermediate decimal numbers: Shells can
do arithmetic with hex values as well.
Change-Id: Ia7bfba0d7864fc091ee6003e09b705fd7254e99b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently, if everything worked fine, `$fail` will be unset, leading
to the following `if` statement:
if [ -eq 1 ]
Resulting in the error message:
/bin/sh: line 9: [: -eq: unary operator expected
Fix this by removing the whole `if`, we can just use `exit`.
Change-Id: I1bc7508d2a45a2bec07ef46b9c5d9d0b740fbc74
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
To support the new CONFIG_CBFS_VERIFICATION feature, cbfstool needs to
update the metadata hash embedded in the bootblock code every time it
adds or removes a CBFS file. This can lead to problems on certain
platforms where the bootblock needs to be specially wrapped in some
platform-specific data structure so that the platform's masked ROM can
recognize it. If that data structure contains any form of hash or
signature of the bootblock code that is checked on every boot, it will
no longer match if cbfstool modifies it after the fact.
In general, we should always try to disable these kinds of features
where possible (they're not super useful anyway). But for platforms
where the hardware simply doesn't allow that, this patch introduces the
concept of "platform fixups" to cbfstool. Whenever cbfstool finds a
metadata hash anchor in a CBFS image, it will run all built-in "fixup
probe" functions on that bootblock to check if it can recognize it as
the wrapper format for a platform known to have such an issue. If so, it
will register a corresponding fixup function that will run whenever it
tries to write back modified data to that bootblock. The function can
then modify any platform-specific headers as necessary.
As first supported platform, this patch adds a fixup for Qualcomm
platforms (specifically the header format used by sc7180), which
recalculates the bootblock body hash originally added by
util/qualcomm/createxbl.py.
(Note that this feature is not intended to support platform-specific
signature schemes like BootGuard directly in cbfstool. For anything that
requires an actual secret key, it should be okay if the user needs to
run a platform-specific signing tool on the final CBFS image before
flashing. This feature is intended for the normal unsigned case (which
on some platforms may be implemented as signing with a well-known key)
so that on a board that is not "locked down" in any way the normal use
case of manipulating an image with cbfstool and then directly flashing
the output file stays working with CONFIG_CBFS_VERIFICATION.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I02a83a40f1d0009e6f9561ae5d2d9f37a510549a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41122
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for the new CONFIG_CBFS_VERIFICATION feature to
cbfstool. When CBFS verification is enabled, cbfstool must automatically
add a hash attribute to every CBFS file it adds (with a handful of
exceptions like bootblock and "header" pseudofiles that are never read
by coreboot code itself). It must also automatically update the metadata
hash that is embedded in the bootblock code. It will automatically find
the metadata hash by scanning the bootblock for its magic number and use
its presence to auto-detect whether CBFS verification is enabled for an
image (and which hash algorithm to use).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I61a84add8654f60c683ef213b844a11b145a5cb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41121
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds the Guybrush APCBs into the AMD firmware binary.
BUG=b:182510885
TEST=Build
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: Iba40cab1d68e9f8d7291e7d715be185a3b6249f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
Load VBIOS in pci set_resources to PCI_VGA_RAM_IMAGE_START (0xc0000)
since pci_dev_init() will not load it in GOP case (VGA_ROM_RUN is not
set). Add Cezanne GFX PID.
BUG=b:171234996
BRANCH=Zork
Change-Id: I4a6fea9b6cd60c862e15ed2ed539869c0f9bd363
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Configure early GPIOs in verstage if it is run in PSP otherwise
configure them in bootblock.
BUG=b:181961514, b:180721208
TEST=builds
Signed-off-by: Mathew King <mathewk@chromium.org>
Change-Id: Ib9410089592776ffe198901f2de914fd04bdbade
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The `q35-alpine.cfg` adds a lot of PCIe devices to resemble the
topology inside an Intel Alpine Ridge Thunderbolt controller.
By no means could this be detected as such a controller. But
having a real-world example of such a topology can help to
test the allocator and other algorithms on a deeper tree.
It adds two levels of PCIe switches (`alpine-root` and
`alpine-1`), and two endpoints (a `pci-testdev` and an xHCI
controller).
It can be added to the default `q35-base.cfg` config, e.g.
with:
$ make qemu QEMU_EXTRA_CFGS=util/qemu/q35-alpine.cfg
Change-Id: Ieab09c5b67a5aafa986e7d68a6c1a974530408b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51329
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Aamir Bohra