CB:58374 (for mb/google/brya0) was merged before brya4es is
available (CB:59728). And since brya4es is forked from brya0, brya0's
change need to be brought into brya4es as well.
BUG=b:203014972
TEST=build
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I97489343b8f7a5b9457cd6f4a61cc37cd10ab450
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Hook up `Device4Enable` FSP setting to devicetree state and drop its
redundant devicetree setting `Device4Enable`.
The following mainboards enable the DPTF device in the devicetree
despite `Device4Enable` is not being set.
* google/deltaur
Thus, set it to off to keep the current state unchanged.
Change-Id: Ic7636fc4f63d4beab92e742a6882ac55af2565bc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
`SataEnable` is set by some boards, but it doesn't have any effect since
its related FSP option is hooked up to the devicetree state. Thus, drop
it.
Change-Id: Id645bfcade7ca1d495fb8df538113b3d10392a82
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Hook up `SmbusEnable` FSP setting to devicetree state and drop its
redundant devicetree setting `SmbusEnable`.
The following mainboards enable the SMBus device in the devicetree
despite `SmbusEnable` is not being set.
* google/deltaur
* starlabs/laptop
Thus, set it to off to keep the current state unchanged.
Change-Id: I0789af20beb147fc1a6a7d046cdcea15cb44ce4c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
1. Copy the default configuration from Puff.
2. Update the 'stop_gpio' to GPP_H22.
BUG=b:193750191
BRANCH=None
TEST=Update kernel for 8125 outbox driver and test with
command suspend_stress_test.
Change-Id: I2e82dbc1e6c68cbd84b603adc7fdc3ee1d4d3392
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
The original change was for mb/google/redrix (commit 0167f5adbb),
"The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this"
But it was merged before redrix4es is available. As redrix4es is forked
from redrix, relevant change in redrix need to be brought into
redrix4es as well.
BUG=b:206850071
TEST=build
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I5ac90c249273bf4e75cccb5889844a7f196f56fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
CONFIG_ONBOARD_SAMSUMG_MEM was used to force Samsung memory.
CPLD is used to determine the memory type leaving CONFIG_ONBOARD_SAMSUNG_MEM unused.
Remove this config.
BUG = N/A
TEST = Boot Facebook FBG1701 Rev 1.0 - 1.4
Change-Id: I60626552f2e2338cf5cbaaf4dca1b1eb2756d8df
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59755
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CONFIG_ONBOARD_SAMSUMG_MEM was used to force Samsung memory.
CPLD returns different values for every board revision. Use this value
to determine the memory type.
BUG = N/A
TEST = Boot Facebook FBG1701 Rev 1.0 - 1.4
Change-Id: I21b5ddc430410a1e8b3e9012d0c07d278880ff47
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The macro was defined using PCH_DEV_SLOT_CPU_1, which doesn't exist,
so replace it with the correct value of SA_DEV_SLOT_CPU_1.
Change-Id: If6d294d681907c51ac5678c9251364d4d6df4329
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Since 4ES variants were forked from their own original variants,
use the same TPM I2C as well.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Iddd6d8c22a181aba596b836f20392f76539b8549
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Move the SMM Kconfig options to the specific agesa cpu families.
Select NO_SMM for family14 since since no Fam14h platform uses SMM.
Leave SMM_ASEG enabled for family15tn and family16kb for now.
TEST=Boot Debian 11 on PC Engines apu1
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I09bbe036a88dada847219606ec79c68e7ca8e5cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
All SPI interface setup related functionality that Stoneyridge
implemented in its southbridge code is already present in the common AMD
SoC code, so use that code instead.
The common fch_spi_early_init function requires the SPI controller's
base address to be set, so call lpc_set_spibase(SPI_BASE_ADDRESS) right
before it. fch_spi_early_init then calls lpc_enable_spi_rom and
lpc_enable_spi_prefetch which can be removed from the board code now.
Next it calls fch_spi_configure_4dw_burst which does the same as the now
removed sb_disable_4dw_burst function when
SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST is set to n which is the default.
This option can also only be set to y for SoCs that aren't Stoneyridge.
Finally fch_spi_early_init calls fch_spi_config_modes which configures
the SPI mode and speed settings according to the Kconfig settings and
the settings in the amdfw part. On Kahlee this was done by calls to
sb_read_mode and sb_set_spi100 before. The previous patch added the
remaining Kconfig settings, so the resulting register values don't
change in the non-EM100 case. In the EM100 case the TPM speed is changed
from 64 to 16 MHz.
TEST=Both the non-EM100 mode with a real SPI flash and the EM100 mode
with a first-generation EM100 results in Google/Barla reaching the
payload and the show_spi_speeds_and_modes call in bootblock prints the
expected settings:
relevant bootblock console output in non-EM100 case:
SPI normal read speed: 33.33 MHz
SPI fast read speed: 66.66 Mhz
SPI alt read speed: 66.66 Mhz
SPI TPM read speed: 66.66 Mhz
SPI100: Enabled
SPI Read Mode: Dual IO (1-2-2)
relevant bootblock console output in EM100 case:
SPI normal read speed: 16.66 MHz
SPI fast read speed: 16.66 MHz
SPI alt read speed: 16.66 MHz
SPI TPM read speed: 16.66 MHz
SPI100: Enabled
SPI Read Mode: Normal Read (up to 33M)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f37a3b040808d6a5a8e07d39b6d4a1e1981355c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Before this patch only the SPI settings that will also end up in the
amdfw part of the firmware were specified in the board's Kconfig. This
patch adds the settings from Kahlee's bootblock.c to the Kconfig file
which will be needed in subsequent patches. Also add a comment about the
EM100 case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie42feb9b41f435c329bf1c78471e65ef5a3fb783
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The PSP EFS code to get the SPI mode and speed from the amdfw part of
the firmware image also works for Stoneyridge which is the one SoC that
selects SOC_AMD_COMMON_BLOCK_PSP_GEN1. Also amdblocks/psp_efs.h already
handles the SOC_AMD_STONEYRIDGE case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibddd3f9237e561d9f0f6b4ad70f59cce1f956986
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
SeaBIOS 1.15.0 was released on December 2nd. This updates the stable
version from 1.14.0 to 1.15.0
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ibc526fbddf8a13e7b00e963f9c2e73a9863c9daa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The reference design has changed to use GPIO SET1 for NOR flash.
There are no devices already built using SET0 so we can safely
change the implementation without conditional configs.
Reference document:
kingler_mt8186_mt6366_lpddr4x_e.pdf, page 11.
crab_proto 0_2021112.pdf, page 11.
BUG=b:202871018
TEST=flash verify pass on kingler on bootblock stage
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I031686ccddcf789f3fa966d113ee48949e454b8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Retrieve the SKU ID for Corsola via CBI interface.
If that failed (or no data found), fallback to ADC channels for SKU ID.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I2888190d498df28b5ae13cf92cc41d088e8f8ee7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Updating from commit id 586aafa3a:
2021-07-19 05:36:18 +0200 - (Merge "errata: workaround for Neoverse V1 errata 1791573" into integration)
to commit id 73193689c:
2021-12-06 16:47:33 +0100 - (Merge changes I7c9f8490,Ia92c6d19 into integration)
This brings in 684 new commits.
Change-Id: I4173f3cb646839ad12c4e43e8c50b0be53364f04
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Fixed according to the declaration in
soc/intel/common/block/include/intelblocks/cfg.h.
Change-Id: I50dbc00806fefda8f4dac8bfa21dc714a9504566
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
As part of the `what-jenkins-does` target, combine the code coverage
data from all unit tests (currently just coreboot and libpayload).
BUG=b:203800199
TEST=`make what-jenkins-does && ls -l coreboot-builds/coverage.info`
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: Id99615ca8279f80a402d5371221b8fd36fb91d55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59959
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Combine guybrush mem_parts_used.txt across guybrush variants. Guybrush
reference memory parts is used as the base, then Nipperkin memory
parts were appended, followed by DeWatt memory parts. Duplicates were
removed.
The memory id mapping was not affected on guybrush reference and
Nipperkin. DeWatt memory id mapping was affected, DeWatt boards will
need to be adjusted.
This works around a limitation in APCB, which currently only supports
one set of memory SPDs.
BUG=b:209486790, b:204151079
BRANCH=None
TEST=Boot guybrush and nipperkin
Change-Id: Ie17025e092f2b9397afea33fce285e80ef5dc995
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit (and thus passing control to OSPM). For ACPI
> only platforms (where SCI_EN is always set), when transitioning from
> either the mechanical off (G3) or soft-off state to the G0 working
> state this register is cleared prior to entering the G0 working state.
This means we don't want to clear the PM1 register on resume. By
clearing it the linux kernel can't correctly increment the wake count
when the power button is pressed. The AMD platforms implement the _SWS
ACPI methods, but the linux kernel doesn't actually use these methods.
BUG=b:172021431
TEST=suspend zork and push power button and verify power button
wake_count increments. Verified other wake sources still work.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Stoneyridge selects ARCH_X86 unconditionally and all coreboot code will
run on the x86 cores. On Picasso and later, the Chromebooks run verstage
on the PSP which is an ARM V7 core which needs some special handling
cases in the code, but this doesn't apply to Stoneyridge.
TEST=Timeless build results in an identical image for Google/Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I013efd13b56c0191af034a8c4b58e9b26a31c6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states#
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit.
This change makes sure we clear the PM/GPE blocks are cleared before
enabling the SCI_EN bit.
BUG=b:172021431
TEST=Boot guybrush and morphius to OS and verify suspend resume still
works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In ec/google/chromeec: Add PLD to EC conn in ACPI table(667471b8d8), PLD is added to ACPI table. It causes the DUT to not boot into the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2 to solve this issue.
BUG=b:209568644
BRANCH=none
TEST=build coreboot and system boot into OS.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: If5ce6ca061d9d56ba0bbb1f157b2ba278d3fa9c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59953
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ports some parts of main coreboot Makefile to the libpayload
Makefile in order to improve object files creation.
Moreover, the coreboot source files are now accessible an will be
correctly compiled under libpayload build directory.
Change-Id: If1280c0a3f7e99aad2ecf8a0379a98af31ccefc3
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Copy header files from the main commonlib/bsd to libpayload output
installation directory.
Change-Id: Idc7175240f3077ec98280331f9a952310aae4341
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities. Haven't checked the reference
code, but the register descriptions suggested that the register in
Mullins behaves similar to the one in Stoneyridge. Right now this code
is unused, but it's probably still a good idea to fix it.
TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding
a call to hudson_set_spi100 with this patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifbd960a9509542b28f03326a3066995540260bef
Tested-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and
doesn't zero out the other bits.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for both Picasso and Cezanne also only sets the
SPI_USE_SPI100 bit and doesn't zero out the other bits.
TEST=Verified that Mandolin still boots. It didn't show any signs of
possibly related instabilities before though, so this test doesn't say
much.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
commit 90ac882a32 (soc/amd/common/block/
spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig
option to enable/disable the 4DW burst support in the SPI flash data
prefetcher, but missed to update the documentation above the
fch_spi_early_init prototype, so update the outdated documentation now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Current log2_ceil(x) is defined as log2(x * 2 - 1). When x is larger
than (1 << 31), (x * 2 - 1) won't fit in u32, leading to incorrect
result. Therefore, correct it as (log2(x - 1) + 1). Also add unit tests
for inline functions in lib.h.
BUG=none
TEST=make tests/lib/lib-test
BRANCH=none
Change-Id: If868f793b909a6ad7fc48a7affac15e2c714fa2e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
These functions can't be weak, because they actually need to configure
the GPIOs for eSPI and the TPM. With this change zork boots again.
I also noticed that zork doesn't use the early table in bootblock. This
means that zork will only boot if psp_verstage is enabled.
BUG=b:209465425
TEST=boot zork to ramstage
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Use KiB and MiB instead of multiplying/dividing with/by the numeric
value when doing region size calculations.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I56c380190b11aa3214cce31b82974327e3d15000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Unit tests fail on clang 13.0 because Cmocka's main() function is
declared with return type int, but through some of our chain-include
games it sometimes gets coreboot's main_decl.h which declares the
function as void. Compilers have traditionally always been very
laissez-faire about the signature of the main function, but it seems
that clang has been getting more strict by default recently. Explicitly
disable the related warning to shut it up.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I867c9dac659be86e7b7cf4cc41d6fa105aa9ac41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Unit tests fail on clang 13.0 with a cryptic
error: _timestamp_size changed binding to STB_WEAK [-Werror,-Wsource-mgr]
Probably something related to the weird things we do to mock memlayout
areas. Too lazy to track it down. Let's just disable this
(clang-specific, not properly documented) warning flag.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ie49c9eef3c74592c068c899c6717621dbcb9f609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
The placement calculation logic in cbfs_add_component() has become quite
a mess, and this patch can only fix that to a limited degree. The
interaction between all the different pathways of how the `offset`
variable can be set and at what point exactly the final placement offset
is decided can get quite convoluted. In particular, one existing problem
is that the offset for a file added with the --align flag is decided
before the convert() function is called, which may change the form (and
thereby the size) of the file again after its location was found --
resulting in a location that ends up being too small, or being unable to
find a location for a file that should fit. This used to be okay under
the assumption that forced alignment should really only be necessary for
use cases like XIP where the file is directly "used" straight from its
location on flash in some way, and those cases can never be compressed
-- however, recent AMD platforms have started using the --align flag to
meet the requirements of their SPI DMA controller and broken this
assumption.
This patch fixes that particular problem and hopefully eliminates a bit
of the convolution by moving the offset decision point in the --align
case after the convert() step. This is safe when the steps in-between
(add_topswap_bootblock() and convert() itself) do not rely on the
location having already been decided by --align before that point. For
the topswap case this is easy, because in practice we always call it
with --base-address (and as far as I can tell that's the only way it was
ever meant to work?) -- so codify that assumption in the function. For
convert() this mostly means that the implementations that do touch the
offset variable (mkstage and FSP) need to ensure they take care of the
alignment themselves. The FSP case is particularly complex so I tried to
rewrite the code in a slightly more straight-forward way and clearly
document the supported cases, which should hopefully make it easier to
see that the offset variable is handled correctly in all of them. For
mkstage the best solution seems to be to only have it touch the offset
variable in the XIP case (where we know compression must be disabled, so
we can rely on it not changing the file size later), and have the extra
space for the stage header directly taken care of by do_cbfs_locate() so
that can happen after convert().
NOTE: This is changing the behavior of `cbfstool add -t fsp` when
neither --base-address nor --xip are passed (e.g. FSP-S). Previously,
cbfstool would implicitly force an alignment of 4K. As far as I can tell
from the comments, this is unnecessary because this binary is loaded
into RAM and CBFS placement does not matter, so I assume this is an
oversight caused by accidentally reusing code that was only meant for
the XIP case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia49a585988f7a74944a6630b77b3ebd79b3a9897
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove global variables `sblink` and `node_nums` and add function
`get_node_nums()` which reads from PCI config once and returns a static
variable.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I20a47f967093ef91355377c164656cabadc30fe6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add a list of gpios to lock for brya. This currently includes
GPIOs connected to the FPMCU.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This change supplies a list of ADL gpios that are connected to non-host
(x86) controllers and should be locked after initial configuration.
Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking.
BUG=b:210430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
YH Lin