This patch adds a parallel implementation of cbmem that supports
dynamic sizing. The original implementation relied on reserving
a fixed-size block of memory for adding cbmem entries. In order to
allow for more flexibility for adding cbmem allocations the dynamic
cbmem infrastructure was developed as an alternative to the fixed block
approach. Also, the amount of memory to reserve for cbmem allocations
does not need to be known prior to the first allocation.
The dynamic cbmem code implements the same API as the existing cbmem
code except for cbmem_init() and cbmem_reinit(). The add and find
routines behave the same way. The dynamic cbmem infrastructure
uses a top down allocator that starts allocating from a board/chipset
defined function cbmem_top(). A root pointer lives just below
cbmem_top(). In turn that pointer points to the root block which
contains the entries for all the large alloctations. The corresponding
block for each large allocation falls just below the previous entry.
It should be noted that this implementation rounds all allocations
up to a 4096 byte granularity. Though a packing allocator could
be written for small allocations it was deemed OK to just fragment
the memory as there shouldn't be that many small allocations. The
result is less code with a tradeoff of some wasted memory.
+----------------------+ <- cbmem_top()
| +----| root pointer |
| | +----------------------+
| | | |--------+
| +--->| root block |-----+ |
| +----------------------+ | |
| | | | |
| | | | |
| | alloc N |<----+ |
| +----------------------+ |
| | | |
| | | |
\|/ | alloc N + 1 |<-------+
v +----------------------+
In addition to preserving the previous cbmem API, the dynamic
cbmem API allows for removing blocks from cbmem. This allows for
the boot process to allocate memory that can be discarded after
it's been used for performing more complex boot tasks in romstage.
In order to plumb this support in there were some issues to work
around regarding writing of coreboot tables. There were a few
assumptions to how cbmem was layed out which dictated some ifdef
guarding and other runtime checks so as not to incorrectly
tag the e820 and coreboot memory tables.
The example shown below is using dynamic cbmem infrastructure.
The reserved memory for cbmem is less than 512KiB.
coreboot memory table:
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000002ffff: RAM
2. 0000000000030000-000000000003ffff: RESERVED
3. 0000000000040000-000000000009ffff: RAM
4. 00000000000a0000-00000000000fffff: RESERVED
5. 0000000000100000-0000000000efffff: RAM
6. 0000000000f00000-0000000000ffffff: RESERVED
7. 0000000001000000-000000007bf80fff: RAM
8. 000000007bf81000-000000007bffffff: CONFIGURATION TABLES
9. 000000007c000000-000000007e9fffff: RESERVED
10. 00000000f0000000-00000000f3ffffff: RESERVED
11. 00000000fed10000-00000000fed19fff: RESERVED
12. 00000000fed84000-00000000fed84fff: RESERVED
13. 0000000100000000-00000001005fffff: RAM
Wrote coreboot table at: 7bf81000, 0x39c bytes, checksum f5bf
coreboot table: 948 bytes.
CBMEM ROOT 0. 7bfff000 00001000
MRC DATA 1. 7bffe000 00001000
ROMSTAGE 2. 7bffd000 00001000
TIME STAMP 3. 7bffc000 00001000
ROMSTG STCK 4. 7bff7000 00005000
CONSOLE 5. 7bfe7000 00010000
VBOOT 6. 7bfe6000 00001000
RAMSTAGE 7. 7bf98000 0004e000
GDT 8. 7bf97000 00001000
ACPI 9. 7bf8b000 0000c000
ACPI GNVS 10. 7bf8a000 00001000
SMBIOS 11. 7bf89000 00001000
COREBOOT 12. 7bf81000 00008000
And the corresponding e820 entries:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
BIOS-e820: [mem 0x0000000000001000-0x000000000002ffff] usable
BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
BIOS-e820: [mem 0x0000000001000000-0x000000007bf80fff] usable
BIOS-e820: [mem 0x000000007bf81000-0x000000007bffffff] type 16
BIOS-e820: [mem 0x000000007c000000-0x000000007e9fffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
Change-Id: Ie3bca52211800a8652a77ca684140cfc9b3b9a6b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2848
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Change "ERROR" to "WARNING" -- not finding the indicated file is usually
not a fatal error.
Change-Id: I0600964360ee27484c393125823e833f29aaa7e7
Signed-off-by: Shawn Nematbakhsh <shawnn@google.com>
Reviewed-on: http://review.coreboot.org/2833
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Using the CPU microcode update script and
Intel's Linux* Processor Microcode Data File
from 2013-02-22
Change-Id: I9bb60bdc46f69db85487ba923e62315f6e5352f9
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2845
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Using the CPU microcode update script and
Intel's Linux* Processor Microcode Data File
from 2013-02-22
Change-Id: Icaf0e39978daa9308cc2f0c4856d99fb6b7fdffa
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2844
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
for latest URL of their microcode tar ball
Change-Id: I3da2bdac4b2ca7d3f48b20ed389f6a47275d24fe
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2842
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Force link speed on these platforms to 3 Gbps to defeat buggy SATA
drives.
Change-Id: Ia38a7c486fb1f4469cd67ca5244bbf61f877d556
Signed-off-by: Shawn Nematbakhsh <shawnn@google.com>
Reviewed-on: http://review.coreboot.org/2823
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The standard string functions memcmp(), memset(), and memcpy()
are needed by most programs. The rmodules class provides a way to
build objects for the rmodules class. Those programs most likely need
the string functions. Therefore provide those standard functions to
be used by any generic rmodule program.
Change-Id: I2737633f03894d54229c7fa7250c818bf78ee4b7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2821
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This configures power management registers according to
the 1.2.0 reference code drop. There are many inconsistencies
with the documentation and I tried to note those with ?.
This does not do the same for LynxPoint-H yet.
Change-Id: I9b8f5c24a8b0931075a44398571c9b0d54cce6a6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2819
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This uses the new helper function added earlier.
Change-Id: Icdb5d5c51f70eeb7e39e11062276ceb3eb3d9473
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2818
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This is updated to handle LynxPoint-H and LynxPoint-LP
and a new wake event is added for the power button.
Boot, suspend/resume, reboot, etc on WTM2
and then check the event log to see if expected events
have been added.
Change-Id: I15cbc3901d81f4fd77cc04de37ff5fa048f9d3e8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2817
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This makes use of the new functions from pmutil.c that take
care of the differences between -H and -LP chipsets.
It also adds support for the LynxPoint-LP GPE0 register block
and the SMI/SCI routing differences.
The FADT is updated to report the new 256 byte GPE0 block on
wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address
block so that part is zeroed to prevent IASL and the kernel
from complaining about a mismatch.
This was tested on WTM2. Unfortunately I am still unable to get an
SCI delivered from the EC but I suspect that is due to a magic
command needed to put the EC in ACPI mode. Instead I verified that
all of the power management and GPIO registers were set to expected
values.
I also tested transitions into S3 and S5 from both the kernel and
by pressing the power button at the developer mode screen and they
all function as expected.
Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The kernel ACPI was not happy with the Add inside a
ResourceTemplate (or perhaps within the IO declaration)
Instead make a buffer of IO reservations and turn _CRS
into a method that updates the buffer depending on the
chipset type.
This adds an \ISLP() method that checks the chipset LPC
device ID to see if it is -LP or -H.
It also increases the PM base reservation to 256 bytes
and moves both GPIO and PM base to above 0x1000 on -LP
chipsets.
Change-Id: I747b658588a4d8ed15a0134009a7c0d74b3916ba
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This was put in for debugging and experimentation on i945
and has been copied around since. Drop it from lynxpoint.
Change-Id: I0b53f4e1362cd3ce703625ef2b4988139c48b989
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2814
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
There are subtle yet significant differences in some of the
registers in the power management region between LynxPoint-H
and LynxPoint-LP.
In order to reduce code that is accessing these registers and
would need special cases this adds a number of helper functions
that can be used in both ramstage and SMM.
This commit just adds the new functions, subsequent commits will
start to use them.
Change-Id: I411da75da519f5b3198a408078cbf3114e426992
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2813
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
These base addresses are used in several places and it
is helpful to have one location that is reading it.
Change-Id: Ibf589247f37771f06c18e3e58f92aaf3f0d11271
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2812
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Add a helper function pch_is_lp() that will return 1 if
the current chipset is of the new "low power" variant used
with Haswell ULT.
Additionally these functions are added to SMM so it can
be used there.
Change-Id: I9acdea2c56076cd8d9627aba66cf0844c56a38fb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2811
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
In order to be able to talk to an EC via standard path.
Change-Id: I3fe76882dec9a0596cbc1c844afa2ddb03ed771c
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2810
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
I'm not sure if I screwed this up originally or the Intel docs changed
(I didn't bother to go back and check). According to ME BWG 1.1.0 the give
up bit is in the host general status #2 register.
Change-Id: Ieaaf524b93e9eb9806173121dda63d0133278c2d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2808
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The RESET_ON_INVALID_RAMSTAGE_CACHE option indicates what to do
when the ramstage cache is found to be invalid on a S3 wake. If
selected the system will perform a system reset on S3 wake when the
ramstage cache is invalid. Otherwise it will signal to load the
ramstage from cbfs.
Change-Id: I8f21fcfc7f95fb3377ed2932868aa49a68904803
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2807
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Cache the relocated ramstage into the SMM region. There is
a reserved region within the final SMM region (TSEG). Use that
space to cache the relocated ramstage program. That way, on S3 resume
there is a copy that can be loaded quickly instead of accessing the
flash. Caching the ramstage in the SMM space is also helpful in that
it prevents the OS from tampering with the ramstage program.
Change-Id: Ifa695ad1c350d5b504b14cc29d3e83c79b317a62
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2806
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Instead of hard coding the policy for how a relocated ramstage
image is saved add an interface. The interface consists of two
functions. cache_loaded_ramstage() and load_cached_ramstage()
are the functions to cache and load the relocated ramstage,
respectively. There are default implementations which cache and
load the relocated ramstage just below where the ramstage runs.
Change-Id: I4346e873d8543e7eee4c1cd484847d846f297bb0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2805
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The SMM region is available for multipurpose use before the SMM
handler is relocated. Provide a configurable sized region in the
TSEG for use before the SMM handler is relocated. This feature is
implemented by making the reserved size a Kconfig option. Also
make the IED region a Kconfig option as well. Lastly add some sanity
checking on the Kconfig options.
Change-Id: Idd7fccf925a8787146906ac766b7878845c75935
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2804
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The TSEG region is accessible until the SMM handler is relocated
to that region. Set the region as cacheable in romstage so that it
can be used for other purposes with fast access.
Change-Id: I92b83896e40bc26a54c2930e05c02492918e0874
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2803
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
So it can get used in both romstage and ramstage.
Change-Id: Ief9eaafdd91df2a7b668de1a9b83aea3af3ff894
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2802
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The haswell processors support the ability to save their SMM state
into MSR space instead of the memory. This feaure allows for parallel
SMM relocation handlers as well as setting the same SMBASE for each
CPU since the save state memory area is not used.
The catch is that in order determine if this feature is available the
CPU needs to be in SMM context. In order to implement parallel SMM
relocation the BSP enters the relocation handler twice. The first time
is to determine if that feature is available. If it is, then that
feature is enabled the BSP exits the relocation handler without
relocating SMBASE. It then releases the APs to run the SMM relocation
handler. After the APs have completed the relocation the BSP will
re-enter the SMM relocation handler to relocate its own SMBASE to the
final location. If the parallel SMM feature is not available the BSP
relocates its SMBASE as it did before.
This change also introduces the BSP waiting for the APs to relocate
their SMBASE before proceeding with the remainder of the boot process.
Ensured both the parallel path and the serial path still continue
to work on cold, warm, and S3 resume paths.
Change-Id: Iea24fd8f9561f1b194393cdb77c79adb48039ea2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2801
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Accessing the flash part where the ramstage resides can be slow
when loading it. In order to save time in the S3 resume path a copy
of the relocated ramstage is saved just below the location the ramstage
was loaded. Then on S3 resume the cached version of the relocated
ramstage is copied back to the loaded address.
This is achieved by saving the ramstage entry point in the
romstage_handoff structure as reserving double the amount of memory
required for ramstage. This approach saves the engineering time to make
the ramstage reentrant.
The fast path in this change will only be taken when the chipset's
romstage code properly initializes the s3_resume field in the
romstage_handoff structure. If that is never set up properly then the
fast path will never be taken.
e820 entries from Linux:
BIOS-e820: [mem 0x000000007bf21000-0x000000007bfbafff] reserved
BIOS-e820: [mem 0x000000007bfbb000-0x000000007bffffff] type 16
The type 16 is the cbmem table and the reserved section contains the two
copies of the ramstage; one has been executed already and one is
the cached relocated program.
With this change the S3 resume path on the basking ridge CRB shows
to be ~200ms to hand off to the kernel:
13 entries total:
1:95,965
2:97,191 (1,225)
3:131,755 (34,564)
4:132,890 (1,135)
8:135,165 (2,274)
9:135,840 (675)
10:135,973 (132)
30:136,016 (43)
40:136,581 (564)
50:138,280 (1,699)
60:138,381 (100)
70:204,538 (66,157)
98:204,615 (77)
Change-Id: I9c7a6d173afc758eef560e09d2aef5f90a25187a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2800
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that there is a way to disseminate the presence of s3 wake more
formally use that instead of hard coded pointers in memory and stashing
magic values in device registers. The northbridge code picks up the
field's presence in the romstage_handoff structure and sets up the
acpi_slp_type variable accordingly.
Change-Id: Ida786728ce2950bd64610a99b7ad4f1ca6917a99
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2799
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Provide the implemenation of cbmem_get_table_location() so that
cbmem can be initialized early in ramstage when CONFIG_EARLY_CBMEM_INIT
is enabled. The cbmem tables are located just below the TSEG region.
Change-Id: Ia160ac6aff583fc52bf403d047529aaa07088085
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2798
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When CONFIG_EARLY_CBMEM_INIT is selected romstage is supposed to have
initialized cbmem. Therefore provide a weak function for the chipset
to implement named cbmem_get_table_location(). When
CONFIG_EARLY_CBMEM_INIT is selected cbmem_get_table_location() will be
called to get the cbmem location and size. After that cbmem_initialize()
is called.
Change-Id: Idc45a95f9d4b1d83eb3c6d4977f7a8c80c1ffe76
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2797
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Provide a field in the romstage_handoff structure to indicate if the
current boot is an ACPI S3 wake boot. There are currently quite a few
non-standardized ways of passing this knowledge to ramstage from
romstage. Many utilize stashing magic numbers in device-specific
registers. The addition of this field adds a more formalized method
passing along this information. However, it still requires the romstage
chipset code to initialize this field. In short, this change does not
make this a hard requirement for ramstage.
Change-Id: Ia819c0ceed89ed427ef576a036fa870eb7cf57bc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2796
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The romstage_handoff structure can be utilized from different components
of the romstage -- some in the chipset code, some in coreboot's core
libarary. To ensure that all users handle initialization of a newly
added romstage_handoff structure properly, provide a common function to
handle structure initialization.
Change-Id: I3998c6bb228255f4fd93d27812cf749560b06e61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2795
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Some of the functions called from assembly assume the standard
x86 32-bit ABI of passing all arguments on the stack. However,
that calling ABI can be changed by compiler flags. In order to
protect against the current implicit calling convention annotate
the functions called from assembly with the cdecl function
attribute. That tells the compiler to use the stack based parameter
calling convention.
Change-Id: I83625e1f92c6821a664b191b6ce1250977cf037a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2794
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Now that CONFIG_RELOCTABLE_RAMSTAGE is available support it on
Haswell-based systems. This patch is comprised of the following changes:
1. Ensure that memory is not preserved when a relocatable ramstage is
enabled. There is no need.
2. Pick the proper stack to use after cache-as-ram is torn down. When
the ramstage is relocatable, finding a stack to use before vectoring
into ramstage is impossible since the ramstage is a black box with an
unknown layout.
Change-Id: I2a07a497f52375569bae9c994432a8e7e7a40224
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2793
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch adds an option to build the ramstage as a reloctable binary.
It uses the rmodule library for the relocation. The main changes
consist of the following:
1. The ramstage is loaded just under the cmbem space.
2. Payloads cannot be loaded over where ramstage is loaded. If a payload
is attempted to load where the relocatable ramstage resides the load
is aborted.
3. The memory occupied by the ramstage is reserved from the OS's usage
using the romstage_handoff structure stored in cbmem. This region is
communicated to ramstage by an CBMEM_ID_ROMSTAGE_INFO entry in cbmem.
4. There is no need to reserve cbmem space for the OS controlled memory for
the resume path because the ramsage region has been reserved in #3.
5. Since no memory needs to be preserved in the wake path, the loading
and begin of execution of a elf payload is straight forward.
Change-Id: Ia66cf1be65c29fa25ca7bd9ea6c8f11d7eee05f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2792
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
On ARMv7 the console code can also be built into
the bootblock. Currently building the ARM targets
on a reasonably fast machine can fail, because
console.bootblock.o is attempted to build before
build.h is created. This patch adds a specific
rule for the bootblock variant of console.c, to
match the other variants so that the race condition
goes away.
Change-Id: I52e4242c66a02f011ef26b854aa50c2606a1f81f
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/2873
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
The romstage_handoff structure is intended to be a way for romstage and
ramstage to communicate with one another instead of using sideband
signals such as stuffing magic values in pci config or memory
scratch space. Initially this structure just contains a single region
that indicates to ramstage that it should reserve a memory region used
by the romstage. Ramstage looks for a romstage_handoff structure in cbmem
with an id of CBMEM_ID_ROMSTAGE_INFO. If found, it will honor reserving
the region defined in the romstage_handoff structure.
Change-Id: I9274ea5124e9bd6584f6977d8280b7e9292251f0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2791
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Introduce a new cbmem id to indicate romstage information. Proper
coordination with ramstage and romstage can use this cbmem entity
to communicate between one another.
Change-Id: Id785f429eeff5b015188c36eb932e6a6ce122da8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2790
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The current ramstage code contains uses of symbols that cause issues
when the ramstage is relocatable. There are 2 scenarios resolved by this
patch:
1. Absolute symbols that are actually sizes/limits. The symbols are
problematic when relocating a program because there is no way to
distinguish a symbol that shouldn't be relocated and one that can.
The only way to handle these symbols is to write a program to post
process the relocations and keep a whitelist of ones that shouldn't
be relocated. I don't believe that is a route that should be taken
so fix the users of these sizes/limits encoded as absolute symbols
to calculate the size at runtime or dereference a variable in memory
containing the size/limit.
2. Absoulte symbols that were relocated to a fixed address. These
absolute symbols are generated by assembly files to be placed at a
fixed location. Again, these symbols are problematic because one
can't distinguish a symbol that can't be relocated. The symbols
are again resolved at runtime to allow for proper relocation.
For the symbols defining a size either use 2 symbols and calculate the
difference or provide a variable in memory containing the size.
Change-Id: I1ef2bfe6fd531308218bcaac5dcccabf8edf932c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2789
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
There is a need to calculate the proper placement for an rmodule
in memory. e.g. loading a compressed rmodule from flash into ram
can be an issue. Determining the placement is hard since the header
is not readable until it is decompressed so choosing the wrong location
may require a memmove() after decompression. This patch provides
a function to perform this calculation by finding region below a given
address while making an assumption on the size of the rmodule header..
Change-Id: I2703438f58ae847ed6e80b58063ff820fbcfcbc0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2788
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This adds a function for using the DCCMVAC instruction (dcache clean
by MVA at point of coherency (main memory)). We already have the
inline defined, it's just not used by anything.
Change-Id: Ia0641566a8881335bed8da2963e1db8321d74267
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2871
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This adds a helper function for dcache ops by MVA which will perform
the specified operation on a given memory range. This will make it
more trivial to add other data cache maintenance routines.
Change-Id: I01d746d5fd2f4138257ca9cab9e9d738e73f8633
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This clarifies and/or fixes formatting of some comments and
alphabetizes some function prototypes and inlines. It also
corrects references to "modified virtual address" (MVA).
Change-Id: Ibcdda4febf915cc4a1996a5bbb4ffecbcb50a324
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2869
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This removes some old macros that we no longer use.
Change-Id: I9d87beb5c2deca228cdf89a98e54b2779be0f0ea
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2868
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This just moves cache maintenance stuff from the armv7 bootblock
code to cache.c
Change-Id: I0b3ab58a1d8a3fe3d9568e02e156a36b6f33ca0b
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/2867
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The cbfs stage loading routine already zeros out the full
memory region that a stage will be loaded. Therefore, it is
unnecessary to to clear the bss again after once ramstage starts.
Change-Id: Icc7021329dbf59bef948a41606f56746f21b507f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2865
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Change-Id: I4aba6cc490ab24c6db345c0c5a64a6a9985ed0ab
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-on: http://review.coreboot.org/2864
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
For diagnostic purposes we had been dumping the assembly
code when stages.o was built. We've past the need to do this
and it's confusing to watch.
Change-Id: Ib84cb73ed9dad3454efcb2be90d990ce88575229
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2555
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Remove the spurious creation of a start symbol, and use the
stage_entry symbol directly.
Change-Id: Ia62d5c056ac8b20c8ffdb78bff3d306065b6c45f
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/2560
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Changes:
- Get rid of the h8scm mainboard specific code and use the
platform generic function wrapper that was added in change
http://review.coreboot.org/#/c/2777/
AMD Fam15: Add SPD read functions to wrapper code
- Move DIMM addresses into devicetree.cb
Notes:
- The DIMM reads only happen in romstage, so the function is not
available in ramstage. Point the read-SPD callback to a generic
function in ramstage.
Change-Id: I575221039ad65a59ae0f93397ef1038b669e81c7
Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com>
Reviewed-on: http://review.coreboot.org/2829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Aaron Durbin