Add an SVC command to get the previous boot status. If there is any
pre-x86 boot failure in the previous boot cycle, PSP stores it in warm
reset persistent register and triggers a warm reset. PSP verstage on the
subsequent boot gets the previous boot status and reports any failure to
the vboot before a FW slot is selected.
BUG=b:242825052
TEST=Build Skyrim BIOS image and boot to OS in Skyrim. Trigger a failure
scenario by corrupting certain firmware blobs and observe that PSP
reports the failure boot status. On a normal boot, observed that PSP
reports successful boot.
Change-Id: I440deee560b72c80491bfdd7fda38a1c3a4299e5
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70381
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
add dptc support for different power parameter on tablet/clamshell
mode.
BUG=b:257187831
BRANCH=none
TEST=validate the parameter change for each mode by AGT.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I96e04d113d18b42f3457056a5e4fa311ceccffb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
As _Static_assert() is a compiler built-in, <assert.h> is not needed.
Change-Id: I578b4bf286538d0606569d19ec760a1846c8145b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There's no need to call die() in the case that the MMIO address of the
I2C controller is NULL, so handle this case by returning a failure
instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12c143916ad551c56cc4ff75ae23754018817505
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Remove more TODO comments after reviwing against morgana ppr #57396, rev
1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7fd9666a69d9a2b0902fa28ab0af0187198297ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70466
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since soc_get_common_config will either return a valid pointer or cause
a linking error, this function will also return a valid pointer or cause
a linking error, so no need for additional runtime checks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I99661247b9f8f47a708e3a6ff3f9e5359b505509
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70739
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Since commit 28e61f1634 ("device: Use __pci_0_00_0_config in
config_of_soc()") config_of_soc() was changed form being an actual
function to a macro for the __pci_0_00_0_config struct pointer generated
by util/sconfig. This change didn't only improve linker optimizations,
but also turned runtime errors into link-time errors, so it's guaranteed
that __pci_0_00_0_config won't be NULL and config_of_soc() won't
"return" NULL.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id99ceaa9f7a70788da3f3068fb3da92d34fb6361
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70732
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Improve the espi_set_initial_config implementation so that a failure in
there due to an invalid configuration won't call die() and stop booting
at this point, but return an error to the caller so that the rest of the
eSPI configuration will be skipped.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97f730778a190c4485c4ffe93edf19bcbaa45392
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Improve the eSPI pin configuration setup so that a failure in there
won't call die() and stop booting at this point, but return an error to
the caller so that the rest of the eSPI configuration will be skipped.
This will prevent an early boot failure if the EC is missing or the eSPI
interface is in a non-functional state. Also slightly shorten the
function names so that the code still fits into 96 chars.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice2d3a791d6a464eff4fb69d02aeca0bfe580be2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70730
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Enable GPP clk req disabling on morgana after reviewing against morgana
ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id2502137486df7a8b0ac6a4b3e061b25b23e2e51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70465
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update pci int defs per preview of next ppr after rev 1.52, #57396
Update birman and mayan mainboards to remove deleted PIRQs.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I10e13784761f0b9245f0ca10e3cd07d396ec4224
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70379
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5db2587ff74432a0ce1805d8d7ae76d650693eea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Morgana does not have emmc, so do not select it.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ib75618c137e825befc7384275f1a4ef9b5137b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70477
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this. Also make sure that the address of the lcl_usb_phy
struct is located below the 4GB boundary, so that the truncation to 32
bits won't result in pointing to a different memory location than
intended. In this error case, which I don't expect to happen, print an
error and write 0 to mcfg->usb_phy_ptr so that the FSP will use its
default values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1394aa6ef5f401e0c7bdd4861f1e28ae46e56e4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70505
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable LPC SPI DMA. This helps with ~20ms boot time improvement while
loading various components synchronously.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Observe a boot time
improvement of ~20 ms.
Before:
Total Time: 1,503,032
After:
Total Time: 1,485,536
Change-Id: I4dd57d46ae9bd664d57178d34b5beda872ed2cdb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70383
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81f3a38344f91cecb4fe5431ed211834e5ed599c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69897
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The size of a pointer changes between a 32 and 64 bit coreboot build. In
order to be able to use a 32 bit FSP in a 64 bit coreboot build, change
the pointer in the UPDs to a uint32_t to always have a 32 bit field in
the UPD for this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I419fef73d2881e323487bc7fe641b2ac4041cb17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
DTTS indicated Dynamic Thermal Table Switching.The proposal would like
to develop the schematic for switching 6 thermal table by lid status,
machine body mode and temperature. After entering the OS, the thermal
table would be table A. If the “Motion” or “Lid status change” is
detected. The thermal table would switch to laptop mode or lid close
mode.
Once the higher environment temperatures are detected,the thermal
table would switch to the corresponding power throttle table (B, D or
F). Based on these table switching mechanisms, no matter how the
end-user uses Chromebook,they could enjoy more humanized thermal
designs.
Release Over Over Release .
Temp. Temp. Temp. Temp. .
-------------------------------------------------------- .
Desktop mode Table A Table B 50C 45C .
Lid open (Default) .
-------------------------------------------------------- .
Desktop mode Table C Table D 55C 50C .
Lid close .
-------------------------------------------------------- .
Laptop mode Table E Table F 45C 40C .
-------------------------------------------------------- .
On the proposal, the transmission rules are list below:
1. Table A is the default table after booting.
2. A, C, E (Release Temp) can switch to each other.
3. B, D, F (Over Temp) can switch to each other.
4. A and B, C and D, E and F can switch to each other.
5. If Lid open/close or mode switch event trigger, temperature release
tables will translation to each other, temperature over tables will
translation to each other.After that event trigger, EC will check the
new temperature condition and decide if the temperature need to be
trigger.For example, if table A will switch to table D, table A will
switch to C with Lid close event, if temperature is over 55C, EC will
trigger temperature to switch form table C to D.
6. EC will trigger 3 times body-detection events during power on boot
without any body-mode and lid status change. For this case if the
previous table label is on same group, we will based on the temperature
to decide the table.
For example, assume table A is current table. When the temperature
reaches 50C, than the table is switched from A to B. The current table
is B. When the temperature is downgrade below 45C, the table is
switched form B to A. The same rule is for C and D, E and F.
BRANCH=none
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I866e5e497e2936984e713029b5f0b6d54cbc9622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Include <amdblocks/gpio_defs.h> instead of "gpio_defs.h", since
gpio_defs.h is not only visible in a local scope, but also as
<amdblocks/gpio_defs.h>.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iab3e5bb235a5b1bc995b6cf8710f0d8c1886142d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70432
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
At the moment IO trap is not implemented for AMD platforms.
Change-Id: Ib62ac4e4e418a8bab80c30dfb5183ecd8beb998d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Fixing documentation of PAD_INT macro and replacing spaces with a tab to
match the rest of the documentation.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I72a2578ce21dd10b3beb65c706440c3379f216d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70281
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Use the broadcast ID to deliver LINT1 as NMI to all CPUs,
instead of listing individual LAPIC IDs.
Change-Id: Iaf714d8c2aabd16c59c3bcebc4a207406fc85ca9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
For the most part, this doesn't change any post codes, simply making the
existing post-codes into macros.
picasso/romstage.c did get a couple of post codes removed to match the
other files.
The POST_ROMSTAGE and POST_BOOTBLOCK codes are intended to become global
at some point, while the POST_AGESA and POST_PSP codes would stay AMD
specific.
Change-Id: I007a09b6a3ed3280bac674cd74e298ec5c408ab7
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Update the fields that need to be updated directly in the local static
usb_phy_config struct instead of dereferencing the pointer written to
the corresponding UPD field. This will allow updating the type of UPD
field in a follow-up commit to enable 64 bit coreboot builds.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I44a9fe719e6803fc957fee3db13b261489ed313d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This ports forward part of commit df09680626 ("soc/amd/picasso: Add
support for 64bit builds") to the newer AMD SoCs.
Use -Wl instead of -l to get the output format that the commands in the
Makefile expect to extract the value for PSP_BIOSBIN_SIZE. Without this
change, readelf will split the output into two lines in case of a 64 bit
coreboot build. This results in invalid amdcompress and amdfwtool
command lines which will cause the amdfwtool call to fail with
Error: BIOS binary destination and uncompressed size are required
With the old readelf -l command we get this output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000080 0x0000000002030000 0x0000000002030000
0x0000000000010000 0x0000000000010000 RWE 0x10
while we get the correct output in a 32 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000060 0x02030000 0x02030000 0x10000 0x10000 RWE 0x20
With readelf -Wl we also get the expected output in a 64 bit build:
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000080 0x0000000002030000 0x0000000002030000 0x010000 0x010000 RWE 0x10
TEST=This fixes the 64 bit build on Cezanne with some follow-up patches
applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I35f9feda4d0da3546592dfac233ca66732bd5464
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69895
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
CBFS_MCACHE is currently experiencing overflow with CBFS verification
enabled. Reduce the pre-x86 cbmem console size from ~5.5 KiB to 4 KiB.
This reduction along with the available free space in PSP shared buffer
(32 KiB) helps to increase the CBFS_MCACHE size from 8 KiB to required
14 KiB.
BUG=b:259342909
TEST=Build and boot to OS in Skyrim. Ensure that there are no CBFS
mcache overflows.
FMAP: area COREBOOT found @ 80a000 (8347648 bytes)
VB2:vb2_digest_init() 0 bytes, hash algo 2, HW acceleration unsupported
CBFS: mcache @0x00019a40 built for 67 files, used 0x19a0 of 0x1c00 bytes
CBFS: Found 'apu/amdfw_a' @0x0 size 0x3ff80 in mcache @0x0001b640
VB2:vb2_digest_init() 262016 bytes, hash algo 2, HW acceleration enabled
Ensure that firmware_CbfsMcache FAFT test is successful.
Change-Id: I35e1a8c6d73e0870b6a43aac604f83a0b6c3aabe
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69827
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Update acpigen_write_alib_dptc() to support extra 5 thermal profiles.
User can use these profiles for dynamic thermal table switching support.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9e6d5c0fc6f492340c935899920d9ee7c9396256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68470
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: If1645180dd98ff5a1661fd568554de5831ef237e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69623
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove TODO comments after reviwing against morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I598daf40a774ec81a956ce8c1aeb1cbbf4b475f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69275
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang doesn't understand the -Wstack-usage=40960 option. Replace it
with -Wframe-larger-than=40960.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7d8b9c26d3fc861615a8553332ed1070974b751b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested on google/vilboz (running the PCI rom with yabel).
Change-Id: Icd72c4eef7805aacba6378632cbac7de9527673b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Now that we have a common init_tables in all mainboards using AMD SoCs,
both the population of the fch_pic_routing and fch_apic_routing arrays
and the definition of those arrays can be moved to the common AMD SoC
code to not have the code duplicated in all mainboards.
BUG=b:182782749
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: I8c65eca258272f0ef7dec3ece6236f5d00954c66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68853
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Explicitly cast integers to fix building for long mode.
Change-Id: I9f56e183563c943d1c2bd0478c41a80512b47c5e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Use the newly added functions to iterate over the FSP HOBs to report the
resources used by FSP to the resource allocator instead of open coding
the iteration over the HOBs in the SoC code.
TEST=Patch doesn't change reported resources on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I67ca346345c1fa08b008caa885d0a00d2d5afb12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Use VBOOT_STARTS_BEFORE_BOOTBLOCK to determine whether the VERSTAGE
needs to be build as x86 stage.
Change-Id: I126801a1f6f523435935bb300f3e2807db347f63
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
On newer AMD platforms, mb_pre_fspm() is used to set GPIOs in romstage
for PCIe reset (currently set in bootblock) and touchscreen power
sequencing (not yet implemented, but will be later in the patch train).
Change-Id: Ia422aaa9e80355f9a9f8f850368441e5c8ff6598
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69452
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When no HOB list is found, not only adding the resources reported by the
FSP were skipped, but also adding the GNB IOAPIC resource was skipped.
Fix this bug by moving the reporting of the GNB IOAPIC resource before
the resources reported in the FSP HOBs to not skip the IOAPIC resource
when there's no HOB list.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9174c8d7e5e94144187d27210e12f2dca3a6010f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69460
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is no longer necessary to explicitly add "ERROR: "/"WARNING: " in
front of every BIOS_ERR/BIOS_WARN message.
Change-Id: I22ee6ae15c3d3a848853c5460b3b3c1795adf2f5
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Instead of including pci_int_defs.asl in each board's DSDT, include it
in the common soc.asl. This moves the PRQM OperationRegion and the PRQI
IndexField defined in pci_int_defs.asl into the \_SB scope, but those
are defined inside the \_SB scope both in the Picasso reference code and
for the AMD SoCs from Cezanne on.
TEST=Both Linux and Windows still boot and don't show ACPI errors on
Mandolin after moving this inside the \_SB scope
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4e7bfb15de184cc43cd17c8249be0f59405793f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
This aligns Picasso more with the newer AMD SoCs and also makes it a bit
clearer what this file does. Also remove the unneeded tabs at the
beginning of each line.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie6e5ee815e4346004bc864a6111a255dc689eae8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
On certain mainboards due to hardware design limitations, certain SPI
Read Modes eg. (Dual I/O 1-2-2) cannot be supported. Add ability to
override SPI read modes in boards which do not have hardware
limitations. Currently there is an API to override SPI fast speeds.
Update this API for mainboards to override SPI read mode as well.
BUG=b:225213679
TEST=Build and boot to OS in Skyrim. Observe a boot time improvement of
~25 ms with 100 MHz SPI speeds.
Before:
11:start of bootblock 688,046
14:finished loading romstage 30,865
16:FSP-M finished LZMA decompress (ignore for x86) 91,049
Total Time: 1,972,625
After:
11:start of bootblock 667,642
14:finished loading romstage 29,798
16:FSP-M finished LZMA decompress (ignore for x86) 87,743
Total Time: 1,943,924
Change-Id: I160b56f6201a798ce59e977ca40301e23ab63805
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
This patch groups vboot context, recovery reason and subcode saving, and
reboot calls into two handy functions:
- vboot_save_and_reboot() - save context and reboot
- vboot_fail_and_reboot() - store recovery reason and call function
above
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Ie29410e8985e7cf19bd8d4cccc393b050ca1f1c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69208
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Enable x86 SHA accelerator for use by VBOOT library. This is useful when
CBFS verification verifies the hash of the file being loaded in x86.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim. Observe a boot time improvement of
~10 ms with CBFS verification enabled.
Change-Id: I14efe7be66f28f348330580d2e5733e11603a023
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68954
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPIO debounce timebase bit 4 is only 183uS on Picasso. On the other
SoCs it is 244uS. This affects the 1mS and 2mS actual debounce times
slightly.
Time PCO Others
1mS 0.915mS 1.220mS
2mS 2.013mS 2.684mS
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id84bef75e6ab134778721ca269d763a4bb2ddde5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69209
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When using site-local we need to have ability to override
MAINBOARD_BLOBS_DIR with a different location (presumably somewhere in
site-local). site-local Makefiles.inc should be pulled in first
(different CL) allowing MAINBOARD_BLOBS_DIR to be overwritten.
Change-Id: I028042b947887d1182642ad4482dd1bba7ad8e23
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Use the common device ops instead of an soc-specific device ops.
TEST=builds for each soc
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I1804200c3c3f5ab492d237f4b03484c383862caf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add the generic data_fabric_acpi_name function and device ops to common
code.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I12053389a12081ddd81912a647bb532b31062093
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make the data_fabric_acpi_name function more generic, in preparation to
move it to common.
TEST=build chausie, dump ACPI tables, and inspect DFD0 to DFD7
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I77140d8d0d6bf3e048b737de03d18142a6e23c1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Morgana/Glinda have a different register mapping for data fabric access,
although the registers themselves are mostly compatible. The register
layouts defined by each soc capture the differences and the common code
can use those.
Move the register offsets to soc headers and update the offsets for
morgana/glinda per morgana ppr #57396, rev 1.52 and glinda ppr #57254,
rev 1.51
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9e5e7c85f99a9afa873764ade9734831fb5cfe69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Now that the socs have defined the DF FICAA and MMIO Control registers,
update the common code to use them.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia5566f7af6cf5444fc8c627e004dd08185468c77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This change disables support for memory types not used by each of the
chips. This will in turn remove the files for those memory types from
the platform builds.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8c7f47b43d8d4a89630fbd645a725e61d74bc2a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Don't call into disabled memory type code, it won't work.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie239039b3dd2b5d0a6f8e9230fd3466bb8309761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields, updated per
glinda ppr #57254, rev 1.51
Update IOMS0_FABRIC_ID and DF_MMIO_NP per referenced ppr.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I509eaf5910d8d65ce0956200d7c00451ff9ce864
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields, updated per
morgana ppr #57396, rev 1.52
Update IOMS0_FABRIC_ID and DF_MMIO_NP per referenced ppr.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If64c875026b643c584975f7abffad9b35f1a7b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I01dcea783542ecc0a761191907c1273016f854c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add structs to define the data_fabric register bitfields.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If7cc94681cd5e282e09455c0ac7d3675884c3cf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The data_fabric_set_mmio_np function is effectively identical, so move
it to common code.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I58e524a34a20e1c6f088feaf39d592b8d5efab58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Don't set bit 2 in _STA in order for Windows not to show a warning about
an unknown device in the device manager for this device. Since the _STA
object just returns a constant, a name definition can be used instead of
a method definition.
TEST=The unknown device with device instance path ACPI\AAHB0000\0
disappeared from the device manager in Windows 10 build 19045 on a
Mandolin board with a Picasso APU.
Just shutting down and then booting it again won't clear some internal
state in Windows, so a reboot is needed instead for the change to become
visible.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cb1712756c3623cc3ea16210af69cde0fa18f62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
CB:66943 - commit 8d66fb1a70 (soc/amd: Add amdfw.rom in coreboot.pre)
changed the build flow for the amd firmware binary after glinda was
branched from morgana. Update glinda to match the other SoCs.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b0ccaa8c33e59f7146edd6a86f107480c152008
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Adding coreboot's postcodes to the smart trace buffer lets us see the
entire boot flow in one place.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8eb9f777b303622c144203eb53e2e1bf3314afaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This adds the mendocino specific code for printing the STB data to the
boot log. It still needs to be enabled in the mainboard to be used.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I249507a97ed6c44805e9e66a6ea23f200d62cf66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This allows platforms that support AMD's STB (Smart Trace Buffer) to
print the buffer at various points in the boot process.
The STB is roughly a hardware assisted postcode that captures the
time stamp of when the postcode was added to the buffer. Reading
from the STB clears the data.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8d78c0e86b244f3bd16248edf3850447fb0a9e2c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Enable GPP clk req disabling for disabled PCIe devices. If a clk req
line is enabled for a PCIe device that is not actually present and
enabled then the L1SS could get confused and cause issues with
suspending the SoC.
BUG=b:250009974
TEST=Ran on skyrim proto device, verified that clk reqs are set
appropriately
Change-Id: I6c840f2fa3f9358f58c0386134d23511ff880248
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Currently the GPP clk req configuration code assumes that the size of
the config array is `GPP_CLK_OUTPUT_COUNT`. This commit changes that
code to use the `ARRAY_SIZE` macro instead.
BRANCH=guybrush
BUG=b:250009974
TEST=Ran on nipperkin device, verified that clk req settings are
correct.
Change-Id: I3ff555843c6f5aa38acd8300e0dc2da4e33fb4b7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Factor out the `gpp_dxio_update_clk_req_config` function as it will be
useful for other AMD SoCs.
BUG=b:250009974
TEST=Ran on nipperkin device, verified clk req settings match enabled
devices
Change-Id: I9a4c72d8e980993c76a1b128f17b65b0db972a03
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Instead of using magic constants for the fch_pic_routing and
fch_apic_routing array sizes, define FCH_IRQ_ROUTING_ENTRIES in the
common code headers and use this definition. This also allows to drop
the static assert for the array sizes. In the Stoneyridge mainboard code
the equivalent arrays are named mainboard_picr_data and
mainboard_intr_data; also use FCH_IRQ_ROUTING_ENTRIES as fixed array
size there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d7ee46bd013ce413189398a144e46ceac0c2a10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68818
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Define the fch_irq_routing struct once in a common header file instead
of in every mainboard's code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I11d9000b6ed7529e4afd7f6e8a7332c390da6dab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68817
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Crypto engine prefers the buffer from SRAM. CBFS verification may pass
the mapped address of a CBFS file from SPI flash. This causes PSP crypto
engine to return invalid address. Hence if the buffer is from SRAM, pass
it directly to crypto engine. Else copy into a temporary buffer before
passing it to crypto engine.
BUG=b🅱️227809919
TEST=Build and boot to OS in skyrim with CBFS verification enabled using
both x86 verstage and PSP verstage.
Change-Id: Ie9bc9e786f302e7938969c8093d5405b5a85b711
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add region/range of SPI ROM to be verified by Google Security Chip
(GSC).
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: If8a766d9a7ef26f94e3ab002a9384ba9d444dd1f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Do not compress PSP BIOS image when CBFS verification is enabled.
Otherwise when a file is added to CBFS, cbfstool is not able to find the
metadata hash anchor magic in the compressed PSP BIOS image.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled for
both x86 and PSP verstage.
Change-Id: Iaed888b81d14ede77132ff48abcfbeb138c01ce4
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
With CBFS verification enabled, CBFS file header + file name + metadata
consumes more than 64 bytes. Hence reserve additional space aligned to
the next 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Change-Id: I2b7346e2150835443425179048415f3b27d89d89
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66944
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change ensures that amdfw.rom binary containing metadata hash
anchor is added before any file is added to CBFS. This will allow to
verify all the CBFS files that are not excluded from verification.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled using
x86 and PSP verstages.
Change-Id: Id4d1a2d8b145cbbbf2da27aa73b296c9c8a65209
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
To enable RO CBFS verification in AMD platforms with PSP verstage,
metadata hash for RO CBFS is kept as part of verstage. This means any
updates to RO CBFS, before WP is enabled, requires updating the
metadata hash in the verstage. Hence keep the metadata hash outside the
signed range of PSP verstage. This means the metadata hash gets loaded
as part of loading PSP verstage while still being excluded from the
verification of PSP verstage.
This change keeps the metadata hash outside the PSP footer data. This
will help to keep it outside the signed range of PSP verstage & aligned
to 64 bytes.
BUG=b:227809919
TEST=Build and boot to OS in Skyrim with CBFS verification enabled with
both x86 and PSP verstage.
Change-Id: I308223be8fbca1c0bec8c2e1c86ed65d9f91b966
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68135
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add build rules to build amdfwread tool. Also mark this as a dependency
either while building tools or amdfw.rom.
BUG=None
TEST=Build and boot to OS in Skyrim with CBFS verification enabled.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3fee4e4c77f62bb2840270b3eaaa58b894780d75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66939
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds the initial framework for the Glinda SoC, based on what's been
done for Morgana already.
I believe that there's more that can be made common, but that work will
continue as both platforms are developed.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I43d0fdb711c441dc410a14f6bb04b808abefe920
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This is the enum value to initialize the Smart Trace Buffer's
Spill-to-DRAM feature. More information on how this is used is
available in the STB Linux kernel driver.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iab2e5fb121902959ddd0e7c8cca930a327b69291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Update the MCA bank names for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If0082bd5362bdead3f9dc693d1e338e8cda224f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make GPIO_I2C_MASK macro more accurate by using the GPIO_I2Cx_SCL
definitions instead of BIT(x).
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I13fc376552068a64768fe1cf9f1c09cca1768aed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Update the SMI definitions for morgana per PPR #57396, rev 1.52
Remove references to dropped SMITYPE_XHC2_PME in xhci.c to fix compile
errors.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6a9f05bcc6a6e4c94114ccbd07628629bdfabcba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This allows us to see which of the common code blocks have been verified
and which have not.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Icb9eba5838013de75c408c28a4a7d3afacdf0674
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Now that the SoC-specific UART controller data and the common code part
are cleanly separated, move the code to the common AMD UART support
block folder. The code is identical to the UART code in Cezanne,
Mendocino, Morgana and Picasso while Stoneyridge doesn't use the parts
related to the MMIO device driver.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9429dac44bc02147a839db89d06e8eded7f1af2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
