This adds RTC functions to the existing RK808 driver.
BUG=chrome-os-partner:34436
BRANCH=none
TEST=with eventlog patches applied to pinky, booted and saw eventlog
entries generated with correct timestamps:
localhost ~ # mosys -k eventlog list
entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096"
entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0"
entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode"
Change-Id: I1df70a2ca94ff463ffea8d9f02d951d6c62e6b08
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a304f7e6954f585f04feef54c4902dcb25a39fcc
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3a240e342a54b2e7023da71708d0d70f5131f0b9
Original-Reviewed-on: https://chromium-review.googlesource.com/238525
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9643
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This moves PMIC_BUS from each mainboard's board.h file to a per-
mainboard Kconfig variable. To prevent humans from forgetting to
set a valid value, an invalid default is set in the rk3288 Kconfig
and checked in rk808.c so that compilation will fail if the mainboard
Kconfig does not override it.
Originally, PMIC_BUS was only used by mainboard code as an argument
to RK808 PMIC functions. To conform to the generic RTC API, however,
the RK808 code needs to have the bus number globally defined somewhere
since the rtc_get() and rtc_set() functions don't take any args.
Since CONFIG_PMIC_BUS is globally visible, we no longer need to pass
bus number to the PMIC functions.
BUG=chrome-os-partner:34436
BRANCH=none
TEST=built and booted on Pinky
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I73783878e507b2e7b1526dd2f81cfbdf8f1e2a55
Reviewed-on: https://chromium-review.googlesource.com/240203
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9642
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patch implements support for the CRYPTO module in RK3288 and ties
it into the new vboot vb2ex_hwcrypto API. We only implement SHA256 for
now, since the engine doesn't support SHA512 and it's very unlikely that
we'll ever use SHA1 for anything again.
BRANCH=None
BUG=chrome-os-partner:32987
TEST=Booted Pinky, confirmed that it uses the hardware crypto engine and
that firmware body hashing time dropped to about 1.5ms (from over 70ms).
Change-Id: I91d0860b42b93d690d2fa083324d343efe7da5f1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e60d42cbffd0748e13bfe1a281877460ecde936b
Original-Change-Id: I92510082b311a48a56224a4fc44b1bbce39b17ac
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236436
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/9641
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BRANCH=None
TEST=emerge-veyron_speedy coreboot
BUG=None
Change-Id: Iab377e93472db0b7778df020afa84ee97f0e4079
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fedf6ed7dc220d58ad10d49ac9ea02443746e77e
Original-Change-Id: Id5024bfd32a0aa1fb00f3af8dc337ccccaf40729
Original-Signed-off-by: Jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/237544
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9640
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BUG=None
TEST=emerge veyron_speedy and boot the Speedy board
BRANCH=None
Change-Id: Ida5fd6d839a2e704760a90e9c723c1b688ea6a84
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 42c0d11c3ec65874986c06ca4d7b34f5987f9409
Original-Change-Id: I2f0cff74517a8c031eabb64f4f82d455195c8dd1
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234715
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9639
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This applies the differences between Jerry and Brain:
- No EC
- No SD card
- Minor changes to GPIOs (no lid, power button active low)
- No variations between board IDs (yet)
- No backlight/display attached, but we do have some HDMI
and VOP configuration (need to double check that it's right).
BUG=none
BRANCH=none
TEST=built and booted on Brain (requires follow-up CL
to get into depthcharge)
Change-Id: Idbbc19856e05a145637c28d87c3e19855d13f03b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 67151129c28ca7dd83464e5a5c183d006299293c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3c761d3d4d186a6208a772c05193bdcbd4a5c105
Original-Reviewed-on: https://chromium-review.googlesource.com/235921
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9638
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This adds a directory with files copied over from Jerry, in addition to
build system related changes (configs/* and Kconfig stuff) necessary
to emerge-veyron_brain coreboot.
The next patch will account for differences between Jerry and Brain.
BUG=none
BRANCH=none
TEST=emerge-veyron_brain coreboot works
Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36
Original-Reviewed-on: https://chromium-review.googlesource.com/236989
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9637
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This BCT table is the same as "ramcode == 1", and has been pass the stress
test with this new Micron type.
-Micron MT41K256M16LY-107:N, ramcode = 4
BUG=chrome-os-partner:32071
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6
Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Due to a missing i2c_init(), we were actually running our TPM with
default divisors at 660KHz. Oops.
While it's commendable that both the TPM and our controller seem to have
been running fine all this time at more than 1.5 times the maximum
frequency they support, we should probably still get that fixed.
Also sync Speedy back up to the other Veyron boards since it seems to
have missed a recent SDMMC patch.
BRANCH=None
BUG=None
TEST=Booted Pinky.
Change-Id: I255c66624b21bf48b12f950208ba2c401a75c4e4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f2bd7c8579cd90d2f800c777c1981557d81a9b49
Original-Change-Id: I43e6b5fe02aca605a5b243c5b876bd44b90b2bf9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236580
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9634
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This switches all the rk3288 platforms to use the common CBFS wrapper
instead of implementing its own CBFS media driver. It also happens
that veyron_* platforms use Gigadevice SPI flash (at least for now).
As we use more SPI-related stuff, for example eventlog and vboot data in
Brain's case, we will need to use more of the SPI API anyway. This
prevents us from having to duplicate pieces of it for rk3288.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: Ie462456814646fdc277485d9e2d8c901fd4936e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2d6df2fe6d78bc8eee8689019b9aaf29c82b6b30
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id307bd5fb6cc8f79411d8c66e1370e80c58d017b
Original-Reviewed-on: https://chromium-review.googlesource.com/235882
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9678
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
BUG=None
TEST=emerge veyron_mighty and boot the Mighty board
BRANCH=None
Change-Id: I0047569c9eed7a3881500ba3b05e6726ba8d7b8f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 49366e5bb3ecdec38c898c936392e5d77a91cd53
Original-Change-Id: I3fcdc837e8d7e62c145850f549662d8260aa1120
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234714
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9633
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BUG=None
TEST=emerge veyron_jerry and boot the Jerry board
BRANCH=None
Change-Id: I38cb0106694ada431e6ab6194fce7ba1822bcbcf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6a061072860f74874f0098062806c01bdcb447bd
Original-Change-Id: I6eb0900516bcd95159c472749c54d356448d2344
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234713
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9632
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
BUG=None
TEST=emerge veyron_pinky and boot the Pinky board
BRANCH=None
Change-Id: I75bc1b7681c9a3d7dc2868a2b260884538587dbd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66069927618924af02a4e17503fa49ae2c31fdfc
Original-Change-Id: I06242ade0cabbba56b16b3832a1b4b09bec6f06b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9631
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
We use the devicetree to pass the backlight control gpio before,
but if there have different board version, and it uses different
io to control backlight, it will hard to distinguish it. So, we
move the backlight control to mainboard, and use board_id
to distinguish the backlight control.
BUG=None
TEST=emerge veyron_pinky and Boot the pinky board
BRANCH=None
Change-Id: Ifa81eb2455296f4b4285b681208f4393f266fb34
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2ff7f65134dcf97f97757750eab41dcf8c7765d3
Original-Change-Id: I1ec8e04f4982c3a8c7e31d8dc2c75311b7199ffc
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9630
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Like Nyan, Veyron boards use a GPIO to reset the system so that we can
make the accompanying TPM reset secure and unforgeable. The normal
kernel reboot driver knows that, but the SoC-internal watchdog doesn't.
This patch implements a check for the global reset status register in
the early bootblock and triggers a hard_reset() when it matches "first
global watchdog reset" or "second global watchdog reset". Seems that
the difference between the two is is a choice controlled by
wdt_glb_srst_ctrl (unconfirmed), and we want this code to run in both
cases.
BRANCH=None
BUG=chrome-os-partner:33141
TEST=Run 'mem w 0xff800000 0x9' from the command line, watch how you end
up in recovery without this patch but can boot normally with it.
Change-Id: Ice79648831e1e97d22325711da9e82bbf6bf3c75
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5d7cb52b2c2dcb2fff0bf83fc168439dade4b1b7
Original-Change-Id: I2581bde84f0445c15896060544e9acb60de91c8c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231734
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9629
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Add the Samsung-4GB and Hynix-4GB LPDDR inc files.
Use ram_id 1000 correspond to Samsung-4GB LPDDR
and use ram_id 1001 correspond to Hynix-4GB LPDDR.
BUG=chrome-os-partner:33269
TEST=Boot veyron_speedy normal
BRANCH=None
Change-Id: I21983c48e1e99aa70ae9bb3fb6550ae9af472015
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d34b19dc9b57b4f31dc1b28581f3f8fc0fcc7e6b
Original-Change-Id: I55b6968c642df8c1f579e518232ab5d278e7e12f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233859
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9628
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Essentially a copy of veyron_jerry for now
BUG=chrome-os-partner:33269
TEST=emerge-veyron_speedy coreboot
BRANCH=None
Change-Id: If8f32122e301df1766bca68b11efd8afe8be5e87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f49a151e1dd956ed2cf3ba0b1f9307442b61e639
Original-Change-Id: Ife457db4fd67fe69bcd4082694b3372eccfb304b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233822
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9627
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The only way to reliably reset an SD card in an unknown state is by
power-cycling. Since a kernel may crash and reboot at any point, SD
cards may be left in one of them fancy high-throughput modes that
depthcharge (or, in fact, a newly booting kernel without prior
knowledge) doesn't support, so we need to reset the card on every boot.
This patch adds support to turn off an RK808 regulator completely and
uses that to turn off SD card power rails in early romstage. The time
until configure_sdmmc() in ramstage turns them back on should be more
than enough to drain the power rail for an effective power-cycle.
BRANCH=None
BUG=chrome-os-partner:34289
TEST=Booted a Pinky from SD card, noticed that it works before and
after this patch.
Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96
Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233713
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9626
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This function was added in upstream but was missing in Chromium OS
Change-Id: I35debf65153e5f280343eebfe91438ecf665ba22
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9677
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Commit 54229a7 (arm: Fix checkstack() to use correct stack size) didn't
quite hit the mark. Due to the crazy way our Kconfig includes work, It
accidentally set CONFIG_STACK_SIZE to 0 even on architectures that need
it.
This patch fixes the issue by moving everything back to a single entry
in src/Kconfig, making sure we end up with the intended numbers on all
architectures.
BRANCH=None
BUG=chrome-os-partner:34750
TEST=Built for Pinky, Urara, Falco and Ryu. Confirmed that the generated
.config contained CONFIG_STACK_SIZE=0x0 for the former two, and
CONFIG_STACK_SIZE=0x1000 for the latter.
Original-Change-Id: Ib18561925aafe7c74e6c4f0b10b55000a785e144
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236753
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit c64b127e163f98162f3f7195b6ed09bd5a4b77c4)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2c747b04760bc97f43523596640bfb15317e5730
Reviewed-on: http://review.coreboot.org/9696
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Tested-by: build bot (Jenkins)
Coreboot is designed to have a single serial console at most, on top
of that it may have a CBMEM (virtual) console. Matters are complicated
by the fact that console interface is different between bootblock and
later stages.
A linker list of console driver descriptors is used to allow to
determine the set and type of console drivers at compile time. Even
though the upstream seems to have done away with this approach, which
does not seem the best idea.
As an alternative this patch introduces a common wrapper which
different UART drivers can plug in into. The driver exports a single
API which can be used both directly (in bootblock) and through the
wrapper (in later stages).
The existing drivers can be adjusted to fit this scheme one by one.
The common UART driver API also aligns fine with the upstream
approach.
BUG=chrome-os-partner:27784
TEST=none yet
Original-Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196660
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 94a36ad79a96f83d283c0fd073b05f98ae48820c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id1fe73d29f2a3c722bd77180beebaedb9bf7d6a1
Reviewed-on: http://review.coreboot.org/7872
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
make oldconfig doesn't like 'y' as response to a choice item
such as the architecture list. An empty response, however, is
acceptable, so use that.
Change-Id: Ic3164dd3f40e4a7f5d91e3a7008893655cd69ac2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9676
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The ethernet switch, as soon as it is taken out of reset comes up in
default (bridging) mode, which allows traffic to flow freely across
the ports.
Let's keep it in reset such that there is no cross port traffic
happening while the device boots up.
BRANCH=storm
BUG=chrome-os-partner:32646
TEST=verified that the switch is held in reset during boot.
Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37
Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224989
Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Reviewed-on: http://review.coreboot.org/9465
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This adds the TPM device to the devicetree and configures an
active high edge triggered interrupt at IRQ10 and adds the ACPI
Device for the TPM into the DSDT.
It also cleans up the EC PNP ID to use the EISAID for an EC since
there are now two PNP devices declared, and removes the unused
ENABLE_TPM define at the top of the DSDT.
BUG=chrome-os-partner:33385
BRANCH=samus
TEST=build and boot on samus, ensure TPM is functional at IRQ10
CQ-DEPEND=CL:226661
Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86
Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226663
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This is not a standard feature so it should be included by the
mainboard if it is actually present in a system.
BUG=chrome-os-partner:33385
BRANCH=samus,auron
TEST=build and boot on samus
CQ-DEPEND=CL:226663, CL:226664
Change-Id: Id4d0e5ed243dcb95e64fb8c848667f651b75aa4e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8909913f5c11c5805c77a3373859634b02a301e2
Original-Change-Id: Ib7c171a5a007a2dddfb3d80341c6dc488e383e99
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226662
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9470
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since CL:226662, all TPMP accessing should be removed as well,
else it will cause wtm2 coreboot failed on build.
BUG=none
BRANCH=none
TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot
CQ-DEPEND=CL:226662
Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff
Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3
Original-Signed-off-by: Harry Pan <harry.pan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/232165
Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9477
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This change is made only to make sure there is a good
signal strength on the SPIM lines.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df
Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/249732
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; I2C0 clock is
set up properly.
BRANCH=none
Change-Id: I15ffc5f7d8e8aadfc3cd249284bc492d0d13d9a1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6404ab6ad12ea1579eaf5ae55a9eddd9bd9f96e2
Original-Change-Id: Iafdf492291b47f0088f3b5e621d630b8d21ab106
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250450
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9673
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Extended the 32bit CPU counter to 64bit by adding a static
variable that takes into account CPU counter overflow.
The varibale is updated everythime the timer_raw_value
function is called so I assume that the function is called
often enought to not miss an overflow of the CPU counter.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works as expected
BRANCH=none
Change-Id: I98bcc56e600dcff0c6da7c140dd34faec5e00885
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 972b105f950d800fa44f27bce090f6b89a5a84b9
Original-Change-Id: Id67b14e9d9c2354bc417b6587b615d466690c9b7
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/247642
Original-Reviewed-by: Daniel Ehrenberg <dehrenberg@chromium.org>
Reviewed-on: http://review.coreboot.org/9672
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The current MIPS PLL is configured in such a way that there is
excessive jitter. Correct this by applying new PLL settings. The
resultant frequency is 546MHz instead of 550MHz.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board as part of the JTAG
loading script;
BRANCH=none
Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0
Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245620
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: http://review.coreboot.org/9671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The base address used was TOP CLOCK control address instead of
the PERIPH CLOCK CONTROL. That was incorrect and is fixed with
the current patch.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; now the hash accelerator,
fed by this clock, is correctly clocked at 200MHz.
BRANCH=none
Change-Id: I0ead3951dc1dfc872881b8d1ae9b63f8104af50d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 871cb50ca43a6c760f346eb447e8ff102d8ca0b6
Original-Change-Id: I198d64f97a85a6fcf00c3853bf23d2d767e0e631
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245313
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9670
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:31438
TEST=tested in Pistachio bring up board; previous delay
at the beginning of bootblock is fixed.
BRANCH=none
Change-Id: I30335677c96bfd651bc49e36b562c48588009d67
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9
Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243223
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some of the asserts were not done properly: the value has
to be shifted before is matched with the mask.
Added condition to exit while loop for USB clock setup.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; after this patch is
applied none of the asserts fail and the code is executed
properly.
BRANCH=none
Change-Id: Ib3aae9f7751a9f077bc95b6e0f9d63e3e16d8e4b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 96999a4322ba98e87bc6746ad05b30cc56704e2e
Original-Change-Id: I8d2d468d618ca1ffcb1421409122482444e6d420
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243214
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9667
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With the added code for clock and MFIOs setup, bootblock
now exceeds 16KB. This patch increases the allowed limit
to 18KB.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works as expected
BRANCH=none
Change-Id: I166f882bd3db446bcd6f9e1f828cab22266c6ac7
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: da95db5ed348419b7905dc1ab68fd64d7b2eb5e0
Original-Change-Id: I0cacc6163f21ae3673c2716b12dde66bd48290f9
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243213
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9665
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As the payload increases in size, a bigger CBFS cache is required.
Therfore, bootblock, romstage and the cbfs cache were placed in
GRAM (128 K) and the stack and cbmem console were moved to
SRAM (64 K). With the exception of CBFS cache, the sizes of all
the other regions remains the same.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA and bring up board;
behavior was as expected.
BRANCH=none
Change-Id: I19857f785ca1514f7483d582c7ad6ee470a8fefc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c895660dbdcd113bdc9d832beab30886313c28d6
Original-Change-Id: I004f8f081d04f83e3f5cee969e50803685cfdf67
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236551
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9664
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When using this mode data is received and transmitted on the same
edge of the SPFI clock, which allows for higher frequencies of
operation. In this mode the maximum supported frequency is 50Mhz.
If this mode is not enabled the maximum supported frequency is
25Mhz.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; the SPFI hardware block is
fed by the system clock (with a fixed freqency of 400 MHz).
To achieve the SPFI frequency of 50MHz the internal divider of
SPFI must be set to 64. To achieve a frequency of 25 Mhz the
internal divider must be set to 32.
A value of 64 = division by 8
A value of 32 = division by 16
BRANCH=none
Change-Id: Ifd5f739b6157b99e4c1f92b5bb72615ee610ae6c
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8b6cce616ec7926682d4eff096563acf1dfd6c65
Original-Change-Id: I337b6fcf462bcf6021ca77a8b1133cf49140ba76
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241425
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9663
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Set elements:
- UART1 clock dividers and MFIOs
- SPIM1 clock dividers and MFIOs
- USB clock dividers
- System clock divider
- System PLL
- MIPS CPU PLL
BUG=chrome-os-partner:31438
TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB
have proper functionality.
BRANCH=none
Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151
Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241423
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The GPU MMU won't function properly until it sees the VPR
is locked down. Therefore, do the appropriate work.
BUG=None
BRANCH=None
TEST=Built.
Change-Id: I6011c75c1e6c231f2fa416e0057cb5805a88a2bb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ca9cc9917b98a148442468d1d1541a0408ab6c2c
Original-Change-Id: I3601f419b561cee392391577ef8db66b9fbd8c1b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242910
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/9660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The address of the output buffer sent to the device should be
the bus address and not the virtual address.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA and bring up board;
USB works properly after this change
BRANCH=none
Change-Id: I5c9d199e17c3f4303095ad73f4980d32d04c6118
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 942c385c112c2a4e409da806548081d3e2f8f438
Original-Change-Id: I0c06196501a968a72cb3f2c7dd1027bb22cdaada
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245387
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9455
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Total FIFO length is split into 512 byte blocks.
Allocate these blocks to GRXFSIZ and GNPTXFSZ evenly.
This method avoids hardcoding and makes the FIFO size value
work for dwc2 controllers that have a different FIFO ram size.
BUG=chrome-os-partner:32634
BRANCH=None
TEST=Boot kernel from USB
Change-Id: I78ce0fa4c4600fb56c991874a93bdd6674e648c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5645a25e95f84359cd10fc9fcf56e1f73fd6ce87
Original-Change-Id: Ib50a08c193f7f65392810ca3528a97554f2c3999
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233119
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9454
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
BUG=chrome-os-partner:29778
TEST=emerge-veyron libpayload
Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e
Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211053
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9453
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add and call display shift clock divider function to set shift clock
divider.
This change is also intended for code sharing on dc settings.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and rush
Change-Id: I9ad1b32de50395720355bb2d00f5800c7f6c4b73
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a72fa3411652d54ae1f7d69db0a7293aad7877
Original-Change-Id: I01582c6863d31627ac93db9fddda93f4f78249cd
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238943
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9614
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
DP panel parameters generally can be retrieved thru edid. The parameters
specified here will be used when edid fetching failed.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush and ryu
Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5
Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238941
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9612
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
David Hendricks