Updating some submodule pointers to their latest commit causes some
builds with default configuration to fail since all required components
don't fit into 2MB anymore. Specifically, this has been experienced with
the microcode and FSP submodules.
So, increase the default CBFS size to 4MB to make sure builds succeed
with updated submodules.
Change-Id: I2fc16240bef36c057608acadf3cb7c65e7f0d244
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
VP2420 (vault_ehl) has only 1 DIMM slot present. Set the DIMM_MAX to 1
to optimize the common libraries to not attempt to read and parse more
SPD than needed.
TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see
FSP is retraining the memory properly and fastboot is working.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I29a99f387ffe2df1060547e0818c5c5b66a27061
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set tcc_offset value to 20 in chipset for Thermal Control
Circuit (TCC) activation feature for meteorlake silicon.
Also, remove tcc_offset default value from rex baseboard
and variants.
BUG=b:270664854
BRANCH=None
TEST=Build FW and test on rex board
Change-Id: Ieec1b7e0873eef46a56e612ed1d9445019b1f4a9
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Set tcc_offset value to 10 in devicetree for Thermal Control
Circuit (TCC) activation feature for ovis.
BUG=b:270664854
TEST=Build and boot google/ovis.
Change-Id: I0ef626f6cc460f1b460297804b97038705efaf4c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch adds a power limit for Ovis with 28W Intel Meteor Lake
silicon.
Reference: Intel MTL-UH_Power_Map_Rev1p2, doc: 640982
BUG=b:289854108
TEST=Able to boot google/ovis with power limit being overridden as
appropriate to 28W.
Change-Id: I312c70720fd89261c53d5bd4f45236e829d6c790
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Currently, boards with ES2 silicon are unable to boot with crashlog
enabled because crashlog driver is unable to handle invalid data.
Temporarily disable the crashlog to unblock development until the issue
is fixed.
BUG=b:289749310
TEST=Able to boot to the OS on Screebo
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic63cf9cf5bfa2c92d8f2c5b13df2f23dc118b389
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76231
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Use IOMMU_CAP_BASE_[LO,HI] instead of magic values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7032d9f032a22649951ef1535f39b918eb8bd539
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie155cab1f659e9f7b64cd87ba8a77260056656d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76222
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CBMEM can contain log in different forms (at most one is present):
- coreboot-specific format (CBMEM_ID_TPM_CB_LOG exported as
LB_TAG_TPM_CB_LOG)
- TPM1.2 format (CBMEM_ID_TCPA_TCG_LOG)
- TPM2 format (CBMEM_ID_TPM2_TCG_LOG)
The last two follow specifications by Trusted Computing Group, but until
now cbmem couldn't print them. These formats were added not so long ago
in:
- commit 4191dbf0c9 ("security/tpm: add TPM log format as per 1.2
spec")
- commit 53db677586 ("security/tpm: add TPM log format as per 2.0
spec")
These changes make cbmem utility check for existence of TPM1.2/TPM2 logs
in CBMEM and add code necessary for parsing and printing of their
entries.
TEST=`cbmem -L` for CONFIG_TPM1=y case
TCPA log:
Specification: 1.21
Platform class: PC Client
TCPA log entry 1:
PCR: 2
Event type: Action
Digest: 5622416ea417186aa1ac32b32c527ac09009fb5e
Event data: FMAP: FMAP
TEST=`cbmem -L` for CONFIG_TPM2=y case
TPM2 log:
Specification: 2.00
Platform class: PC Client
TPM2 log entry 1:
PCR: 2
Event type: Action
Digests:
SHA256: 68d27f08cb261463a6d004524333ac5db1a3c2166721785a6061327b6538657c
Event data: FMAP: FMAP
Change-Id: Ib76dc7dec56dd1789a219539a1ac05a958f47a5c
Ticket: https://ticket.coreboot.org/issues/425
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68749
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables BT offload feature for soundwire audio over SSP1.
BT mode is selected via FW_CONFIG and corresponding VGPIOs are
programmed.
BUG=b:275538390
TEST=build and verify BT offload on rex soundwire audio
Change-Id: I99df78787d9f54c91bcedf6f70352890a715cdb3
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75924
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Follow the Project_Uldren_Thermal_paramters_list_2023_0626.xlsx to
modify DPTF parameters and tcc_offset.
- Set tcc_offset to 3.
- Update Critical Policy trip point.
- Update Power Limits PL1 minimum step size to control limits (in mW).
BUG=b:282598257
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and pass thermal test.
Change-Id: Ic5bbb3aa3b036a1eae8a95f63b570db2dc6da978
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76105
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
In next phase, joxer will remove external fivr.
BUG=b:285477026
TEST=emerge-nissa coreboot and boot to OS, suspend/resume
work normally.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I7fd7ad90e1544966170df402243604379f5790db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
This reduces boilerplate. One functional difference is that SSDT no
longer has oem_revision set to 42.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Id2e54d61970294e028a61ba86c07c5482784e307
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Adding tables to R/XSDT, aligning current pointer, computing checksum is
a lot of boilerplate that needs to be done for each table.
TESTED on foxconn/g41.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If4915b8cdfcfdbb34284ea75fa8a0fd23554152d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Phoenix is an x86 soc that supports sha256 instructions.
TEST=boot birman to chromeos
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id228399ba02708b97110d524ce12c2626588762d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76166
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Always send the Exit 4-Byte Address Mode (E9h) command before the first
access to the SPI flash in all stages when the SPI flash is
memory-mapped. This is useful for x86 mainboards that do not access SPI
flash in bootblock yet still need to exit 4-byte addressing mode in
romstage or ramstage.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3a62bfa44a0a5645c1bb80b32d0b9f92075c66bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Replace `CBFS_SIZE` with FMD files to declare regions and sizes. This
will be used to lock BIOS region (except SMMSTORE) on boot.
`CBFS_SIZE` was incorrectly set to 10 MiB, so this also corrects the
BIOS region size to match the FIT values.
Change-Id: I0f068f4d9b376f12b46faa5bb0c6a08e6cb744d8
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76155
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Fixes building when `USE_OPTION_TABLE` is selected.
Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Multiple users have requested to have the DMI values for product UUID
and serial number be populated. Enable the drivers so that we may set
them when flashing or updating firmware.
Change-Id: I710363d9df626d51756a265f0099f26ef28411c2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The Infineon chip occasionally fails Startup or Resume. Adding the
delay makes it work more reliably.
Change-Id: I4a8f98633154888e2167a3d55192b86e13ffcb62
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76095
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
System76 EC since system76/ec@99dfbeaec3 sets PL4 values through PECI
based on AC state for all boards. Remove the static PL4 values from
coreboot since they won't be used.
Ref: https://github.com/system76/ec/pull/353
Change-Id: I66bc547ef1b3419fc677fcbdd5ba5d8cc8e14189
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75333
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Resetting the device will cause the keyboard backlight and airplane LED
to lose their state.
Change-Id: I2f46542fb6b32c479b01335149c9190f6fa1421f
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75275
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the EC to detect C10 using eSPI instead of a dedicated pin.
Change-Id: I58c03d91466b869d53c9ee2cbbe50adc32539494
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable D3cold to prevent issues with Thunderbolt not working after S3
suspend.
Change-Id: Ib4362783546aa01f0f8f5baaad817ee76be9c39c
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Move this function to the root Makefile.inc since other Makefiles use
the exact same function call. Will allow for deduplication in AMD SoC
Makefiles in a follow-on commit.
Change-Id: I56a50e21b27a4cd6ce1a08a3aea338c63322a6b2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76167
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update SX9324 register settings based on tuning value from SEMTECH.
BUG=b:279510275
TEST=Check i2c register settings on Pujjoteen5 and confirm P sensor function can work.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: Idc9a2dc817e027551e209c0a26eeebad398f710c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75900
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's been decided not to use any of the USB 3.0 ports on this board.
This patch disables the remaining USB 3.0 port 0, after the port 1
has already been disabled in commit d0627c7595
("mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 1").
BUG=none
TEST=None of the USB 3.0 ports functional anymore after boot,
the USB 2.0 ports continue working.
Change-Id: I28465f1c5e6d3167c649da898ec60d8bb97093e2
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75836
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With the previous instruction the complete register was set to '0'.
Correctly, only the bits 23:16 must be masked.
Change-Id: Idd6e70dcb42c69cf3bc5d36db993e6def52eba58
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76177
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Because of an incorrect transmit voltage swing, the signal must be
adjusted. The factor of slices for full swing level can be corrected via
the High Speed I/O Transmit Control Register 3. The appropriate value of
0.7 V was determined by using an oscilloscope.
Change-Id: I965960004ca44f1b37b16ce6484000fa7fd8ad90
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
The offset '0xa8c' for the High Speed I/O Transmit Control Register 3
refers to SATA port 1 only. To make this clear, change the name of the
define from 'TX_DWORD3' to 'TX_DWORD3_P1'.
Change-Id: I09d17eeffbe84939297e739586f6b74ed3e2258b
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76174
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
A correction of Tx signal from SATA interface is not necessary on these
boards currently. Therefore remove the define and the corresponding code
on mc_apl5.
Change-Id: I5092ee128cb35e126069d18bb3cbd635e01bbcdb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Set the WIFI_SAR_ID field in FW_CONFIG to selcet the correct SAR table.
BUG=b:285477026
TEST=emerge-nissa coreboot and check the SAR value
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ibea62c77ecad9b2c475452b706779e4cfc6b06d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76144
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:283245785
BRANCH=firmware-grunt-11031.B
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I8eeb5c0935d0531c21bcf4cd3d4fd9dc80b54f79
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This configures the SoC to flip the orientation of the AUX pins to
follow the orientation of the cable when using the kb8010 retimer. This
is necessary when there is no external retimer/mux or the retimer/mux
does not implement the flip. The kb8010 retimer does not support this
feature, so let the SoC do the flip.
BUG=b:267589112
TEST=verified DP-ALT mode works in both cable orientations on rex with
reworked kb8010 DB by flykt@
Change-Id: Iad093e27617b80f8301008deb00b57fb9b3a48ba
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76137
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Secure OS was disabled on Grunt devices since it isn't used.
This reduces the attack surface and is meant to mitigate potential
security risks. However, this prevents users from using an alternate OS.
Enable Secure OS upstream to allows users to use Windows, and ensure
that it is still disabled in the chromium repo.
BUG=b:287630343
TEST=Builds with Secure OS included.
Cq-Depend: chromium:4620881
Change-Id: I213aebc41cae300ecee8c01fc5c7687f7e7f5ee3
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
New port based on autoport.
Autoport worked with minor tweaks, but fan speeds went almost
immediately to the maximum. They are controlled by the NPCD379
Super I/O which isn't supported by coreboot.
But coreboot already has code for NPCD378,
which HP Compaq 8200 SFF makes use of.
So SuperIO configuration was copied from the 8200 SFF port.
It seems to work without any issues in "normal" use.
Most importantly, fan speed control seems to work correctly.
However this means that some of the SuperIO LDNs may be configured
incorrectly. See the comments on Gerrit for more information.
The following is tested and is working:
* Native raminit with both DIMMs
* Libgfxinit textmode and framebuffer on both DisplayPorts and VGA
* External USB2 and USB3 ports: they all work
* USB 3.0 SuperSpeed on Linux-libre (rear, 4 ports)
* Ethernet
* Mini-PCIe WLAN
* SATA: 2.5" SSD and optical drive bay
* Booting Live Linuxes from DVD and USB with SeaBIOS 1.16.1
* GRUB (with Libreboot config)
* PS/2 keyboard and mouse
* S3 suspend and resume, wake using USB keyboard
* Headphone output, line out, internal speaker
* Wake on LAN
* Rebooting
* CMOS options & nvramcui
Untested:
* mSATA slot. The SATA port needs to be enabled on devicetree
too, but I'm unable to test due to lack of hardware
* Line in, mic input
* MXM graphics card
* EHCI debug
Not working:
* Mini-PCIe USB: I couldn't get it working on vendor BIOS either, so
maybe it just isn't present
* PS/2 keyboard wake from S3
Change-Id: I2dc31778c2aa1987d5acdf355973a203dd0bb3a3
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74906
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Felix Singer