The commit 4d8da8ed ("Docs: Update sphinx targets with the build directory")
introduces an additional variable intending to allow an user to specify
a different build directory. Since the variable is not writable from the
outside and also the Docker container used to build doc.coreboot.org
calls the Makefile with `BUILDDIR` instead of `SPHINXDIR`, building the
documentation within the container doesn't work anymore.
Thus, change the variable name to `BUILDDIR` and make it writable.
Steps to reproduce:
cd util/docker
make doc.coreboot.org
make docker-build-docs
Change-Id: Ibc44134cf1996592597252aeb9dcf7ffb3378ee3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
During the ACPI dump of the System Resource Affinity Table (SRAT), it
was noticed that the reserved field within the Memory Affinity structure
contained a non-zero value. This commit addresses the issue by
performing a memset to zero on the reserved field, ensuring the
avoidance of any potential problems arising from garbage values.
TEST= Build for ibm/sbp1 & make sure SRAT Memory Affinity entries
reserved fields read zeroes
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Change-Id: I4ba697a6bd59054e74c84b98f3d9b517d333a5d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75417
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi to function properly with the connected bluetooth devices and
wake up from low power state.
BUG=None
TEST=None
Change-Id: I977493fd95a99381279f5a3f5e679e4893369b8a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
This configures GPIO IO Standby State of GPP_F00 - GPP_F05 as masked
for CNVi.
Meteor Lake rex platform does not wake up from low power state by
bluetooth keyboard and mouse properly. It is identified that IO Standby
State needs to be configured as masked to function properly for CNVi.
BUG=None
TEST=Make rex platform suspend to s0ix state and press a key from
bluetooth keyboard. Check the platform wakes up properly from s0ix.
Change-Id: Ia98abde584699fa01acba47a9df4ef6332ac16fd
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76338
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The actual NVM size of camera module is 64KB; however, only 8KB is in
use to store data. This reduces the size of both NVM0 and NVM1 to 8KB
to minimize the time taken to read NVM and launch Camera preview.
BUG=NONE
TEST=Launch Chrome camera application and check the time taken to
read eeprom from camera service log and show camera preview. It takes
2 to 3 seconds to show camera preview while it takes 4 to 5 seconds
without the changes.
Before the changes:
06:21:04.204944Z OpenDevice(): camera_id = 1
06:21:07.297584Z Read camera eeprom from eeprom
06:21:08.763491Z Read camera eeprom from nvmem
After the changes:
21:37:23.923676Z OpenDevice(): camera_id = 1
21:37:24.386020Z Read camera eeprom from eeprom
21:37:24.574515Z Read camera eeprom from nvmem
Change-Id: I0e2272b3307fea60ea7406fc6899ae2cb0134fa3
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76189
Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Update eMMC DLL tuning values for improved initialization reliability
BUG=b:289763421
TEST=cold reboot stress test over 5000 cycles on Foresee and Kingston
eMMC
Change-Id: I63077b8717feecf3d50507abb188b7fadb5d6c79
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76221
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch skips reading the MEM_CH_SEL GPIO aka GPP_E13 to determine
the memory channel configuration. The signal behavior is not proper,
hence limiting the DIMM capacity to half (only MC0 is enabled).
This patch always reports the full memory capacity as in dual channel
(both MC0 and MC1 enabled).
This change is necessary to ensure that the system reports the correct
memory capacity, even if the MEM_CH_SEL GPIO is not working properly.
BUG=b:290174538
TEST=Able to detect 32GB memory capacity while booting google/ovis.
Without this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 16183080 kB
With this patch:
localhost ~ # cat /proc/meminfo
MemTotal: 32673664 kB
Change-Id: I6c3fa941abb044b79b13785f7b65d09957f0487d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76359
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Since multiple GFX entry causes an ACPI error when trying to write _DOD
method multiple times, combine the GFX entry into one so that _DOD
method is written just once.
BUG=b:289854155
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I22ad70d50f1aecf8da70e8dd04a36a0a7c1c7609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76329
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This CL corrects the trigger for HID over SPI from Level to Edge.
BUG:None
TEST:Tested with I2C and SPI
Change-Id: I78937af22df22d80a702477b6790a7aa40d782a4
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76116
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
The AW37503 is designed to supply positive/negative supply for driving
the MIPI panel. It doesn't integrate non-volatile memory(EEPROM), so we
need to program the registers at boot. We program the target
positive/negative output voltage via I2C and enable the power rails by
pulling up ENP and ENN pins.
On Starmie, we need +/-6V power supply for the MIPI panel. We program
the AW37503 registers in coreboot so that kernel can control AW37503
via fixed regulators without additional settings(what we did for
TPS65132). Since we distinguish AW37503 and TPS65132 by reading the
vendor ID, we need to initialize I2C bus as early as possible.
Therefore, we move mtk_i2c_bus_init() to mainboard_init().
BUG=b:289482828
TEST=emerge-staryu coreboot chromeos-bootimage
TEST=Test the sequence the voltage
Change-Id: I9ccd4db19c93a032226f006eab0427f78f7b6dc8
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76219
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The BT VGPIOs pad config in variant of gpio.c won't be overwritten on board eventually because no matched gpios existed here.
Put BT VGPIOs in gpio_table, ensure that these were able to be overwritten.
The fix included crota and omnigul BT offload work successfully.
BUG=b:264834572
TEST=test Bluetooth offload playback/capture in SCO profile.
Change-Id: I62cecf26abd0411f7cbb0a56b8b8f0a25d370c69
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
In VBOOT_STARTS_IN_ROMSTAGE=y case, vboot_run_logic() did not
get called when postcar was loaded from TSEG stage cache on
ACPI S3 resume path. Resume failed as MP init attempts to
access microcode update from unverified FW_MAIN_A/B section.
In a similar fashion, for POSTCAR=n, loading ramstage from
TSEG stage cache would bypass the call to vboot_run_logic().
TEST=samsung/lumpy with VBOOT_STARTS_IN_ROMSTAGE=y is able
to complete S3 resume.
Change-Id: I77fe86d5fd89d22b5ef6f43e65a85a4ccd3259d9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add fw_config and configurate AUX pin for MB USB Type-C.
MB USB3 doesn't have re-timer, thus have to configurate the AUX pin.
BUG=b:275335023
TEST=build pass
Change-Id: I1334dcbaec6de1707c6892efbebaf8d460ba8648
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76348
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
EDK2 seems to have problems at least with the resource allocation for
Intel's IGD. While the investigation is ongoing, disable top-down
allocation by default if the payload is known to be EDK2.
Change-Id: I771d8a3b74b54a043624843a00498225d1f509ad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Ticket: https://ticket.coreboot.org/issues/499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76373
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
This patch fixes the boot hang due to commit 053a45bcdb ("cpu/x86/lapic: Fix X2APIC_ONLY regression") on platform which selects X2APIC_LATE_WORKAROUND config.
[EMERG] Switching from X2APIC to XAPIC mode is not implemented.
Without this patch: Boot gets stuck inside at BS_WRITE_TABLES when enable_lapic() gets called after X2APIC mode has been enabled. The fix is to change enable_lapic() to track when late enablement for X2APIC mode happens with X2APIC_LATE_WORKAROUND.
TEST=Able to build and boot google/rex to chromeos.
Change-Id: I41e72380e9cfb59721d0df607ad875d7b6546974
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76384
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The current design of the `ucode-<variant>.bin` file combines all
possible microcode per cpuid into a unified blob. This model increases
the microcode loading time from RW CBFS due to higher CBFS verification
time (the bigger the CBFS binary the longer the verification takes).
This patch creates a provision to pack individual microcodes (per CPUID)
into the CBFS (RO and RWs). Implementation logic introduces
CPU_INTEL_MICROCODE_CBFS_SPLIT_BINS config which relies on converting
Intel CPU microcode INC file into the binary file as per format
specified as in `cpu_microcode_$(CPUID).bin`.
For example: Intel CPU microcode `m506e3.inc` to convert into
`cpu_microcode_506e3.bin` binary file for coreboot to integrate if
CPU_INTEL_MICROCODE_CBFS_SPLIT_BINS config is enabled.
Another config named CPU_INTEL_UCODE_SPLIT_BINARIES is used to specify
the directory name (including path) that holds the split microcode
binary files per CPUID for each coreboot variants.
For example: if google/kunimitsu had built with Intel SkyLake processor
with CPUID `506e3` and `506e4` then CPU_INTEL_UCODE_SPLIT_BINARIES
refers to the directory path that holds the split microcode binary
files aka cpu_microcode_506e3.bin and cpu_microcode_506e4.bin.
Refer to the file representation below:
|---3rdparty
| |--- blobs
| | |--- mainboard
| | | |--- google
| | | | |--- kunimitsu
| | | | | |--- microcode_inputs
| | | | | | |--- kunimitsu
| | | | | | | |--- cpu_microcode_506e3.bin
| | | | | | | |--- cpu_microcode_506e4.bin
Users of this config option requires to manually place the microcode
binary files per CPUIDs as per the given format
(`cpu_microcode_$(CPUID).bin`) in a directory. Finally specify the
microcode binary directory path using CPU_UCODE_SPLIT_BINARIES config.
Additionally, modified the `find_cbfs_microcode()` logic to search
microcode from CBFS by CPUID. This change will improve the microcode
verification time from the CBFS, and will make it easier to update
individual microcodes.
BUG=b:242473942
TEST=emerge-rex sys-firmware/mtl-ucode-firmware-private
coreboot-private-files-baseboard-rex coreboot
Able to optimize ~10ms of boot time while loading microcode using
below configuration.
CONFIG_CPU_MICROCODE_CBFS_SPLIT_BINS=y
CONFIG_CPU_UCODE_SPLIT_BINARIES="3rdparty/blobs/mainboard/
$(CONFIG_MAINBOARD_DIR)/microcode_inputs"
Without this patch:
10:start of ramstage 1,005,139 (44)
971:loading FSP-S 1,026,619 (21,479)
> RO/RW-A/RW-B CBFS contains unified cpu_microcode_blob.bin
Name Offset Type Size Comp
...
cpu_microcode_blob.bin 0x1f740 microcode 273408 none
intel_fit 0x623c0 intel_fit 80 none
...
...
bootblock 0x3ee200 bootblock 32192 none
With this patch:
10:start of ramstage 997,495 (43)
971:loading FSP-S 1,010,148 (12,653)
> RO/RW-A/B CBFS that stores split microcode files per CPUID
FMAP REGION: FW_MAIN_A
Name Offset Type Size Comp
fallback/romstage 0x0 stage 127632 none
cpu_microcode_a06a1.bin 0x1f340 microcode 137216 none
cpu_microcode_a06a2.bin 0x40bc0 microcode 136192 none
...
...
ecrw 0x181280 raw 327680 none
fallback/payload 0x1d1300 simple elf 127443 none
At reset, able to load the correct microcode using FIT table (RO CBFS)
[NOTE ] coreboot-coreboot-unknown.9999.3ad3153 Sat May 20 12:29:19
UTC 2023 x86_32 bootblock starting (log level: 8)...
[DEBUG] CPU: Genuine Intel(R) 0000
[DEBUG] CPU: ID a06a1, MeteorLake A0, ucode: 00000016
Able to find `cpu_microcode_a06a1.bin` on google/rex with ES1 CPU
stepping (w/ CPUID 0xA06A1) (from RW CBFS)
localhost ~ # cbmem -c -1 | grep microcode
[DEBUG] microcode: sig=0xa06a1 pf=0x80 revision=0x16
[INFO ] CBFS: Found 'cpu_microcode_a06a1.bin' @0x407c0 size 0x21800 in
mcache @0x75c0d0e0
[INFO ] microcode: Update skipped, already up-to-date
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ic7db73335ffa25399869cfb0d59129ee118f1012
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
This patch changes the default behaviour of the MICROCODE_UPDATE_PRE_RAM
config for the platform with FIT (CPU_INTEL_FIRMWARE_INTERFACE_TABLE)
enabled. If FIT is enabled then microcode update will be taken care of
by FIT at pre-cpu reset hence, microcode update at pre-ram phase can be
skipped.
BUG=b:242473942
TEST=Able to build and boot google/rex with MICROCODE_UPDATE_PRE_RAM
remains disabled. No functional impact.
Without this patch:
CONFIG_MICROCODE_UPDATE_PRE_RAM=y
With this patch:
CONFIG_MICROCODE_UPDATE_PRE_RAM is not set
Change-Id: I603e064115869aba2bffa5589ffe47a44a90b848
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Commit cde4f3b279 ("acpi/gnvs.c: Drop unused pointer to the cbmem
console") removed writing the coreboot memory console pointer to the
GNVS and kept the CBMC field as reserved. Since those fields aren't
needed any more and there are no dependencies on the absolute position
of the different fields in GNVS as long as both GNVS definitions on the
C and the ASL side match, remove the deprecated and unused CBMC field
from the GNVS structs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iadfaf5a4ec1401b027dbfb6a7c6ce74a1dcecdfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76351
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
The function ux_locales_get_text() should expect to have a correct
preram_locales region to read, hence we need to adjust the log levels
inside lib/ux_locales.c:ux_locales_get_text():
* If the region does not exist or is not in a correct format, we should
print in BIOS_ERR
* If the arguments are not correct but we have a good workaround (e.g.
the lang_id from vboot API seems weird), we should print in
BIOS_WARNING.
Also change some minor syntax issues.
BUG=b:264666392, b:289995591
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: Ic8a8856c883f6ca78fed69542a7d388f57c5c508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76316
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Fix below build error after DISPLAY_UPD_DATA is selected:
src/soc/intel/xeon_sp/spr/upd_display.c:131:29: error: variable 'old' set but not used [-Werror=unused-but-set-variable]
131 | const FSP_S_CONFIG *old;
| ^~~
src/soc/intel/xeon_sp/spr/upd_display.c:130:29: error: variable 'new' set but not used [-Werror=unused-but-set-variable]
130 | const FSP_S_CONFIG *new;
Change-Id: I43ed5fadab58e0d4dc824457c7a1bdf48511198e
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76342
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove BUILD_TIME_STAMP_SIZE macro from coreboot because FSP 3223
version have BUILD_TIME_STAMP_SIZE macro defined as part of
`FspProducerDataHeader.h`.
Ref change:
9c28ab1d1a vc/intel/fsp/mtl: Update header files from 3194_81 to 3223.80
BUG=b:285110116
TEST=Able to build google/rex.
Change-Id: I52707adf1aa6dadca8dcf82102f76916a0cfe346
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Use the _tohex function to convert values to hex instead of 'shell
printf'
TEST=timeless builds identical for grunt,dalboz,guybrush,chausie,birman
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic7f7d1b764479088cc0980b208d8d603bc712832
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76314
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Add a new apcb edit tool, apcb_v3a_edit.py, that injects SPDs into
an APCB for phoenix platform.
The tool makes several assumptions:
* Each SPD only uses blocks 0, 1, 3 and 5. All other blocks are zero.
* Each block is 64 bytes.
* Dimm and socket are always 0
* Unused SPD entries are zero'd
BUG=b:281983434
BRANCH=None
TEST=build, flash, boot myst
Change-Id: Ifb50287de77138170714a702ab87d56427aacfef
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76188
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The Makefile was passing `CONFIG_SMMSTORE_v2` which doesn't exist.
Correct this to `CONFIG_SMMSTORE_V2`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I984d2155143c14cb4a347ed24688b9ea492f7f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76317
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Fix regression introduced with commit 01af0f8ac8 ("acpi/acpi.c: Reduce boilerplate").
DSDT table is not to be listed within RSDT/XSDT, ACPICA and/or OSPM may
try load it twice raising conflicts in the namespace and effectively ignoring all or most of the AML.
Change-Id: I0e6d07b35522f2bf9a51cef0a7e3181b15087d88
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Always exit 4-byte addressing mode to prevent errors when the spi flash
is not left in 4-byte addressing mode.
TEST=boot with PSP releases that leave the flash in both 4-byte
and 3-byte mode and verify flash writes
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9884b85bc3b0a9b654a2cb91fb314b0869abd622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76094
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO GPP_B5 is used as input on this mainboard. For a full-populated
DRAM configuration, the input signal is connected to ground and for a
half-populated configuration it is connected to 3.3 V.
BUG=none
TEST=Use different HW configurations and check coreboot log
GPP_B5 = 0:
[DEBUG] 2 DIMMs found
GPP_B5 = 1:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
Change-Id: I48b4a3bea7f1ff804b78b7c648a7ea1925627b8a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76245
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There can be mainboard variants, which are only equipped with
half-populated DRAM. For this reason, the meminit parameter for
populatation should be adjustable. The default setting remains at
full-populated DRAM. At mainboard variant level a different selection
via individual input paths can be made.
Change-Id: I390bbfa680b5505bb2230fa0740720bd9dd1fafb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76244
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Align implementation with real hardwares, such that ECAM
(PCI configuration via MMIO) is available for use when
console is initialised.
Change-Id: I288991f31d3f1678132aa4315168c09eabbbe98d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76206
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
At the time of writing SMM runtime does not make register
accesses to LAPIC registers, but such breakage has been
reported.
S3 resume failure, where OS switched back from X2APIC
to XAPIC mode, can be reproduced with a sandybridge SKU
that has VT-d disabled.
Change-Id: I300ba87c3d8fde548dbaf95703bd7e2fe54cff57
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Some ancient CPUs may have had LAPIC disabled at power-up, so
semantically enable_lapic() should always come before attempting
to access the register banks.
With X2APIC_ONLY option it is necessary to ensure enable_lapic()
is called prior to any other lapic register space accesses,
since the XAPIC mode MMIO accessors are optimised away build-time
and CPU's do not yet initialise for X2APIC mode at reset.
Change-Id: I96eaa5c43108c802375e184e0c68b5091ca0198f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76195
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This devices is always present so hooking up the ops in devicetree makes
more sense.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I369129e365ce8596cad25b97d12168bb08e3ed0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76241
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
None of these boards have an RTC battery, so this option has no
effect. Remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9a55227f74c0b9ae9b56bdef4b8f53b2425b331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
It is not needed, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I606d0a76926e90e4ce321163400aa50ea961c2a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75342
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AB-MGCL (Samsung)
2. K4UBE3D4AB-MGCL (Samsung)
BUG=b:289873670
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7a262ac62c24cfb43c0283c9730c177a242342e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76240
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rather than repeat the same line multiple times, save it in a variable
once and use that variable in the rest of the file.
TEST=timeless birman build identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I4eb262adb3bbda04add79b2e2b8bee9a609a1e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76197
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Pass the APOB NV address as a flash offset instead of x86 address.
TEST=boot birman and verify APOB_NV is working
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I0f710f12cc5d933a75840dbce1c4bad0c2ea04cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76162
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 8be5a82:
2022-10-04 14:01:00 +0000 - (Fix "unnecessary with of ancestor [-gnatwr]")
to commit id 95ad8c5:
2022-12-22 15:32:38 +0000 - (hw-debug: Place global variables in the .bss section)
This brings in 1 new commits:
95ad8c5 hw-debug: Place global variables in the .bss section
Change-Id: Ib28dbcdf14f313cbfeab03e98e05fffe16a1b708
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75794
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Attempting to use X2APIC MSRs before the call to enable_lapic()
is made raises exception and double-faults.
Change-Id: Ib97889466af0fbe639bec2be730784acc015b525
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Felix Singer