The ThinkPad X220i is essentially identical to the ThinkPad X220 but it
has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the
VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard
directory and setting the VGA_BIOS_ID in Kconfig.
Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90
Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de>
Reviewed-on: https://review.coreboot.org/13594
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Some of the pins are not connected/used on kunimitsu board,
this patch will make them "Not connected".
Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and
GPIO TX/RX will be disabled.
BRANCH=none
BUG=none
TEST=Build and booted in kunimitsu.
Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488
Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/316700
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/13629
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Unused PINS will be controlled by GPIO controller (PMODE = GPIO) and
GPIO TX/RX will be disabled.
BUG=none
BRANCH=none
TEST=Build and boot lars
Change-Id: I3a6fcd2f3462e8e0d1273aa80b1599b76b160825
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 889bfd66dbc918e9fb0ba1b95b63fd7a3bf180d9
Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319964
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/13628
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Document the Linux build instructions for EDK2.
TEST=Build EDK2 for Quark on Ubuntu 14.04
Change-Id: I5f87eb2c5879f2fd4dd18880908756089a0c7a51
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13644
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
With the Chrome EC's "board" name set in Kconfig, the build system will
build and add the EC firmware, too. Available for the EC and the USB
PD controller.
Change-Id: I017d3a44d6ab8a540fcd198b4b09c35e4b98a8cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13547
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
While the board configuration still works without this,
It's nicer to have the device statically defined since
the NIC is hardwired to the board.
Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13455
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a "depends on SMP" to the value SQUELCH_EARLY_SMP Kconfig value to
disable its selection when SMP is not enabled.
TEST=Build for Galileo
Change-Id: Ia3aa1d2169ed793e1bb26538b74b12347453d5af
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13639
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Add the code to enable debug serial output using HSUART1:
* Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1
* Note that the BIST value is always zero as validated in
esram_init.inc
* The initial TSC value is currently not saved!
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if serial output is present on HSUART1 at
115200 baud, 8-bit, no parity
Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13445
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
As the audio card needs 1.8V I2C operation. This patch adds
entry into devicetree.cb to set I2C port 4 operate at 1.8V.
TEST=Built & booted lars board. Verified that I2C
port 4 is operating at 1.8V level
Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c
Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe
Original-Signed-off-by: David Wu <David_Wu@quantatw.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/321000
Original-Commit-Ready: David Wu <david_wu@quantatw.com>
Original-Tested-by: David Wu <david_wu@quantatw.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13627
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Enable the option to back up Vboot non-volatile data from CMOS
to flash as these boards have the necessary nvram fmap region
and are using vboot2 which does not backup to the TPM.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45
Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324123
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13601
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
This adds a new kconfig option that will back up the VBNV data
from CMOS to flash, and restore it if the CMOS data is invalid
during boot.
This allows special flags to not get lost when power is lost,
RTC reset is triggered, or CMOS is corrupted.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell:
1-boot and run "enable_dev_usb_boot"
2-reboot and check that it is enabled with crossystem
3-run "mosys nvram clear"
4-reboot and check that it is still enabled
Change-Id: I38103d100117da34471734a6dd31eb7058735c12
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8a356e616c6885d5ae3b776691929675d48a28f9
Original-Change-Id: I06e7ddff7b272e579c704914a0cf8cc14d6994e8
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324122
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13600
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The developer mode gpio switch on rialto is always hardcoded (through a
resistor) as developer mode. We need to ignore it to allow transitions to
verified mode with the virtual developer mode stuff.
TEST=We can now exit dev mode on rialto
Change-Id: I94a949f0973132de5fd008224af79cf612151193
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b
Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325861
Original-Commit-Ready: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13626
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Certain platforms query the recovery mode switch more than just within
vboot during the boot flow. Therefore, it's important that the first call to
get_recovery_mode_switch() is consistent through memory training because
certain platforms use the recovery mode switch to take different action
for memory training. Therefore, defer the clearing of the rec mode
switch to a place when it's known that memory is up and online.
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Three finger salute is honored on chell by retraining memory.
Change-Id: I26ea51de7ffa2fe75b9ef1401fe92f9aec2b4567
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6b0de9369242e50c7ff3b164cf1ced0642c7b087
Original-Change-Id: Ia7709c7346d1222e314bf3ac7e4335a63e9a5144
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/325120
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13604
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
kunimitisu platform updated these two fields if maxim codec
is detected.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10
Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324631
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13603
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch added nhlt_soc_serialize_oem_overrides and
nhlt_serilalize_oem_overrides to be able to override oem_id and
oem_table_id.board file can pass specific string by calling
nhlt_soc_serialize_oem_overrides
kernel use these two fields to construct a topology binary name
if the designate file is not found a default dfw_sst.bin will be used
it is optional.
BUG=chrome-os-partner:49570
BRANCH=glados
TEST=Build & Booted kunimitsu board. Verified that kernel
can read new strings.
Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171
Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022
Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/322860
Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com>
Original-Tested-by: Yang Fang <yang.a.fang@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13602
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This modifies the vbnv_flash driver to make it safe for use
in cache-as-ram by handling the global variables safely.
To make this cleaner all of the variables were moved into
one structure and referenced from there.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=build and boot on chell using following patches to
test backup and restore of vbnv_cmos into flash
Change-Id: I3a17fa51cfd754455502ac2e5f181dae35967f2a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 48876561fa4fb61e1ec8f92596c5610d97135201
Original-Change-Id: Id9fda8467edcc55e5ed760ddab197ab97d1f3d25
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324121
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13599
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
The VBNV region size is determined by vboot and is not really
configurable. Only the CMOS implementation defined this config
variable so switch it to use VBNV_BLOCK_SIZE defined by vboot
in vbnv_layout.h instead.
This requires updating the broadwell/skylake cmos reset functions
to use the right constant.
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=manually tested on chell
Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d
Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324520
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13598
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add a wrapper around the vbnv implementations and call into the different
backend functions from there. Also move some of the common functions to
the common code and simplify the backend drivers. This will allow some
of the code to be re-used so the CMOS backend can backup the data into
the flash backend.
One side effect of this is that the cache of VBNV was removed from CMOS
and EC backends and moved into the VBNV wrapper, but the flash backend
also still has a separate cache because it has more state and complexity
in the implementation. The wrapper cached data is not used for normal
vbnv_read/vbnv_write because some callers need the ability to force a
write if the backend storage is cleared (i.e. CMOS clear).
BUG=chrome-os-partner:47915
BRANCH=glados
TEST=build and boot on chell
Change-Id: I4d2e0e99af7e8a44aec77ad9991507401babcca6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c30f60434a64f6c0eb9ede45d48ddafff19dd24f
Original-Change-Id: Ia97f6607c5ad837b9aa10b45211137221ccb93a0
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324120
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13597
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Successfully invoke TempRamInit from the FSP binary:
* Don't relocate the FSP binary image
* Copy the FSP binary into ESRAM
* Specify Kconfig values to easily debug ESRAM and TempRamInit code
* Specify the FSP binary file location
* Specify the FSP binary image ID
* Specify where in the flash image the FSP image must reside
* Specify the FSP data file location
* Specify where to place the FSP data file in the flash image
* Specify where in the ESRAM the FSP image must reside
Test 1 on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Add "select ENABLE_DEBUG_LED_FINDFSP"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Testing is successful if the SD LED is on indicating that the FSP.bin
file was properly located, The test fails if the SD LED is flashing.
Test 2 on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Remove "select ENABLE_DEBUG_LED_FINDFSP"
* Add "select ENABLE_DEBUG_LED_TEMPRAMINIT"
* Testing is successful if the SD LED is on indicating that the FSP.bin
file was properly located, The test fails if the SD LED is flashing.
Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13443
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires
that utils/xcompile/xcompile change the machine architecture from i686
to i586 to ensure that the Quark does not attempt to execute unsupported
instructions:
* Adjust Makefile.inc to add the RMU to the coreboot image
* Add code to enable the ESRAM
Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h
file from the EDK2 tree (https://github.com/tianocore/edk2.git) to
enable
easy differences and correct issues in coreboot that were found in EDK2.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file
* Add "select ADD_RMU_FILE"
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Remove power from the board
* Apply power to the board
* Testing is successful if the SD LED is on indicating that the end of
esram_init.inc was reached
Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13440
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the "static" declaration from fsp_run_silicon_init and declare
the routine in ramstage.h. This routine can be called directly when FSP
is already in RAM.
TEST=Build and run on Galileo
Change-Id: Iddb32d00c5d4447eab5c95b0ad5c40309afa293e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13630
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We prefer the default AT&T dialect on x86
Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13135
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Document how to add the sleep state and minimal memory setup.
TEST=None
Change-Id: Ibebeef34269dbf2366f1bea6d734f6bade4e4028
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13446
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Document the steps necessary to enable serial output
TEST=None
Change-Id: Ifc0e700d7ef54fb1e28ca9bca34b94cccd3633ac
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13444
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Document how to add the FSP binary to the SPI flash image.
TEST=None
Change-Id: I51b16600ea69853240282ac2eb0d84935b8e2a71
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13442
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Fix links to the documenation.html page which was renamed from
x86Documenation.html.
TEST=Verified documentation links and searched for x86Documenation.html
Change-Id: Icee79bab4c05ac9b8010dc7acdde8dd5e2ab2909
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13592
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work
around Jenkins failures caused by an unmodified clone.
Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13521
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
On certain systems and CPUs Core Performance Boost (CPB) may cause
sporadic system lockups. This issue is also somewhat known on the
various proprietary BIOSes, therefore it seems to be a hardware
incompatibility when present.
Allow the user to disable CBP if needed.
Change-Id: Id6395d067d48963f6c084ad0bf79e23419af24d8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13172
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Certain registered DIMMs failed training due to an error
likely introduced during historical rebase. Ensure that
the SubMemclkRegDly bit is set according to BKDG
recommendations on Family 15 processors.
Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13148
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Under certain conditions, not elucidated in the BKDG,
an extra memclock of CAS write latency is required.
The only reliable way I have found to detect when this
is required is to try training without the delay, and
if DQS position training fails, adding the delay and
retraining.
This is probably related in some form or another to
the badly broken DQS Write Early algorithm given
in the BKDG.
Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13531
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Multilink Family 15h processors were being configured with an
incorrect PowerStepUp/PowerStepDown value. Set the value
according to the BKDG, and clean up the terrible formatting
of the power_up_down() function that led to the incorrect
values being overlooked until now.
Also change u32 declarations to uint32_t in modified functions.
Change-Id: I16e1f5205d6b5f349a3e7167dea04c9eefda4684
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13174
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
- Stop blinking when coming out of standby.
- Remove code to set blink when going into S3. This never
worked correctly.
Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: https://review.coreboot.org/13171
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Note that this is a manually added commit id (to get the CrEC fixes in
that are necessary for building outside cros_sdk), so it will probably
fail.
Change-Id: Idc15cf268c663ae49b209b92b198c9a4d122c7e3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13546
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Document what is involved with adding the bootblock support.
TEST=None
Change-Id: I6c8cc38e1b9346b4962588b33ca5e4ab8eac24c3
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13441
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add the files to build soc/intel/quark and mainboard/intel/galileo for a
minimal coreboot image. Please note that this configuration does not
run. Include HTML documentation for the Galileo Gen 2 board.
Testing is successful if build completes successfully.
TEST=Build for Galileo
Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13507
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
These devicetree patches set the ACPI PM Disabled variable to 1.
This will disable the ACPI PM timer and remove from FADT table.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce
Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319362
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13589
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix
which has a power impact.
Based on a DT variable, this patch disables the ACPI PM timer
late in the boot sequence - disabling earlier will lead to a hang
since the FSP boot flow needs this timer. This also hides the ACPI PM
timer from the OS by removing from FADT table. Once the ACPI PM timer
is disabled, TCO gets switched off as well.
BRANCH=none
BUG=chrome-os-partner:48646
TEST=Build for skylake board with the PmTimerDisabled policy in
devicetree set to 1.
iotools mmio_read32 0xfe0000fc should return 0x2.
cat /sys/devices/system/clocksource/clocksource0/available_clocksource
should list only "tsc hpet". acpi_pm should be removed from this list.
Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583
Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467
Original-Signed-off-by: Archana Patni <archana.patni@intel.com>
Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319361
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13588
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The setting of the SPI controller BAR was conditional
on the nominal frequency being set. Therefore, that doesn't
mean the SPI BAR is set on all boots. Move the setting of
the BAR in the southbridge_bootblock_init() which is called
prioer to cpu_bootblock_init().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Confirmed spibar is always set on glados.
Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8
Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/319461
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13587
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Vboot keeps track of the size of the hashed region in each
RW slot. While that size was being used to calculate the hash
it wasn't being honored in restricting the access within the
FMAP region for that RW slot. To alleviate that create a sub
region that covers the hashed data for the region in which
we boot from while performing CBFS accesses.
BUG=chrome-os-partner:49764
BUG=chromium:445938
BRANCH=glados
TEST=Built and booted chell with cbfstool and dev-util patches.
Change-Id: I1a4f45573a6eb8d53a63bc4b2453592664c4f78b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ac9e84af5b632e5735736d505bb2ca6dba4ce28
Original-Change-Id: Idca946926f5cfd2c87c4a740ad2108010b6b6973
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324093
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13586
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=None
Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9
Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324075
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13585
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built kunimitsu w/ separate verstage.
Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6
Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324074
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13584
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built glados w/ separate verstage and booted.
Change-Id: I626a500c183d21f94d976e24f09af15a242fba9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b564514a8b93f53a919fcdac3589e30dbac82124
Original-Change-Id: Icc989ec5700b3f1a144a6b41198b7dd2c2aac6f7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324073
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13583
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to support both separate verstage and a verified boot after
romstage one needs to ensure the proper GPIO and EC configuration
been complete. Therefore, move that logic to
car_mainboard_post_console_init() in car.c file which gets called
in the early flow of a CAR stage (either verstage or romstage).
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell w/ separate verstage and booted.
Change-Id: Ic728c2904006376fdc2b27b512f72173a2260be3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d190af8996fea894305ebe686afbfda5f2b8a5
Original-Change-Id: I95aeb97737d0ddfa6c53269c9d14db16ed5e47cc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324072
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13582
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When vboot_handoff_flag() is called in the bootblock or a separate
verstage there's no memory nor the possibility of dram coming online.
Therefore, don't bother to attempt call cbmem_find().
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell with separate verstage which pulls in vboot_common.c
dependency. No more linking errors w/ cbmem_find() not being
around.
Change-Id: I494c93adc1c00459fdfaa8ce535c6b4c884ed0fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 414ce6aeaff657dc90289b25e5c883562189b154
Original-Change-Id: I8a5f2d154026ce794a70e7ec38883fa3c28fb6e7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324070
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13580
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Some of the functions within bootmode.c may be required
by boards in verstage. Therefore, allow this file to be built
in verstage.
BUG=chrome-os-partner:44827
BRANCH=glados
TEST=Built chell w/ bootmode.c dependencies in separate verstage.
Change-Id: Id291c1b5cc6594c3ee16c7c3385e682addc0efb6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 084b620e12e7f948087786c0e34d5999a73137a5
Original-Change-Id: I2207819ec1490767cb1cf4b92e34e714783c1c22
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/324071
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13581
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to not reboot loop in the face of failed vboot verification
on resume set the PM1 control register to indicate S5. After the
subsequent cold reset the PM1 control register will indicate S5
as it should.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=On chell injected failed vboot verification. Ensured a reboot
loop doesn't ensue.
Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c
Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323504
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13579
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Christopher Spinrath