GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/Documentation/mainboard/index.md

241 lines
5.2 KiB
Markdown
Raw Normal View History

Documentation: Add mainboard section to index Change-Id: Ib00bd6cdd13f164ca7eb07c9092e8d8fe17d23b1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/26266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-17 13:06:49 +02:00
# Mainboard-specific documentation
This section contains documentation about coreboot on specific mainboards.
mb/51nb: Add support for the 51nb X210 The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems, based on a modern Kabylake CPU. It also ships with no firmware protection, (IFD is fully unlocked, no protected regions are set, no Bootguard), making it an ideal coreboot target. This port is based on the support for the Skylake-based Purism Librem 13v3, with the following significant changes: * EC firmware is contained within the system SPI flash, and so a blob of EC firmware must be injected to a defined location during image build. * GPIO layout is different - this is currently just a raw import of the GPIO configuration from the vendor firmware * The system has two DIMMs, so an additional SPD address has been added * The USB port layout is different * The EC must be enabled at boot time through SuperIO-style logical device configuration * EC register layout is different, necessitating changes in the ACPI tables * The HDA pins are different * The genx_dec config is different All hardware appears to work as expected, although the SD reader is untested. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-24 23:06:39 +02:00
## 51NB
- [X210](51nb/x210.md)
mb/acer/g43t-am3: Add documentation Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: I0e296b3efbff0260f32badc699f1062f9885fa53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-04 23:53:26 +02:00
## Acer
- [G43T-AM3](acer/g43t-am3.md)
Documentation/mb: Link AMD mainboards directly in the big list Fixes an issue with amd/index.md not being part of a toctree Change-Id: Id419695d24a49951afb844c81cc0951d6920e0d2 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-10-05 21:06:35 +02:00
## AMD
mb/amd/padmelon: rename to pademelon This AMD reference board is called Pademelon and not Padmelon, so fix the name in coreboot. Also update the corresponding documentation. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id1c7331f5f3c34dc7ec4bc5a1f5fe3d12d503474 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-10-14 17:48:22 +02:00
- [pademelon](amd/pademelon/pademelon.md)
Documentation/mb: Link AMD mainboards directly in the big list Fixes an issue with amd/index.md not being part of a toctree Change-Id: Id419695d24a49951afb844c81cc0951d6920e0d2 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-10-05 21:06:35 +02:00
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
## ASRock
mb/asrock: Add ASRock H77 Pro4-M mainboard This adds a new port for the ASRock H77 Pro4-M motherboard. It is microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3 SDRAM. The port was initially done with autoport. It is quite similar to the ASRock B75 Pro3-M which is already supported by coreboot. Working: - Sandy Bridge and Ivy Bridge CPUs (tested: i5-2500, Pentium G2120) - Native RAM initialization with four DIMMs of two different types - PS/2 combined port (mouse or keyboard) - Integrated GPU by libgfxinit on all monitor ports (DVI-D, HDMI, D-Sub) - PCIe graphics in the PEG slot - All three additional PCIe slots - All rear and internal USB2 ports - All rear and internal USB3 ports with reasonable transfer rates - All six SATA ports from the PCH (two 6 Gb/s, four 3 Gb/s) - All two SATA ports from the ASM1061 PCIe-to-SATA bridge (6 Gb/s) - Rear eSATA connector (multiplexed with one ASM1061 port) - Console output on the serial port of the Super I/O - SeaBIOS 1.15.0 to boot slackware64 - SeaBIOS 1.15.0 to boot Windows 10 (needs VGA BIOS) - Internal flashing with flashrom-1.2 (needs `--ifd -i bios --noverify-all`) - External flashing with flashrom-1.2 and a Raspberry Pi 1 - S3 suspend/resume from either Linux or Windows 10 Not working: - Booting from the two SATA ports provided by the ASM1061 - Automatic fan control with the NCT6776D Super I/O Untested: - VBT (it is included, though) - Infrared header Change-Id: Ic2c51bf7babd9dfcbaf69a5019b2a034762052f2 Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-06 19:59:18 +02:00
- [H77 Pro4-M](asrock/h77pro4-m.md)
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
- [H81M-HDS](asrock/h81m-hds.md)
- [H110M-DVS](asrock/h110m-dvs.md)
mainboard: Add ASUS P8H61-M LX Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-02 09:41:08 +02:00
## ASUS
Documentation: Fix toctree and remove dead links Change-Id: Ie3c7c33096f60a5aa476ff55c538fe68ffadc068 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-11 08:52:50 +01:00
- [A88XM-E](asus/a88xm-e.md)
Documentation: Add Asus F2A85-M Change-Id: I4d195f4833ba71fdc559815cafb0f5d0d254e897 Signed-off-by: Balazs Vinarz <vinibali1@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-13 19:00:18 +01:00
- [F2A85-M](asus/f2a85-m.md)
Documentation/mainboard: Add missing Asus toctree references The new pages for the P8Z77-M, P2B-LS, and P3B-F were missing from index.md, causing Sphinx to output "document isn't included in any toctree" warnings. Change-Id: I7883d48bfbe6bff5595aa9303f9d6f4a55eadc9c Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-05 03:31:38 +02:00
- [P2B-LS](asus/p2b-ls.md)
- [P3B-F](asus/p3b-f.md)
Documentation: link asus p5q on mainboard page Change-Id: Ia3f58cc15897bff87dd699ab1fb1c42545119f0b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-01-22 18:46:37 +01:00
- [P5Q](asus/p5q.md)
mb/asus/p8x7x-series: Add P8C WS as a variant of P8X7X series Mainboard information can be found in the included documentation. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Idb696193e5a67c42adf45e54d455d2dff7681ca7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-25 15:29:24 +02:00
- [P8C WS](asus/p8c_ws.md)
mainboard: Add ASUS P8H61-M LX Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-02 09:41:08 +02:00
- [P8H61-M LX](asus/p8h61-m_lx.md)
mb/asus/p8h61-m_pro: Add small fixes * Add VBT * Configure OnBoard NIC * Add documentation Change-Id: Iad739b4e1dacb41f5f63247150951df7013bbf0c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-20 10:05:18 +02:00
- [P8H61-M Pro](asus/p8h61-m_pro.md)
mb/asus/p8x7x-series: Add P8H77-V as a variant of P8X7X series Mainboard information can be found in the included documentation. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ic811e24bd72da84e5ca8f5b09f2eb65872153b72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55111 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-31 18:21:39 +02:00
- [P8H77-V](asus/p8h77-v.md)
Documentation/mainboard: Add missing Asus toctree references The new pages for the P8Z77-M, P2B-LS, and P3B-F were missing from index.md, causing Sphinx to output "document isn't included in any toctree" warnings. Change-Id: I7883d48bfbe6bff5595aa9303f9d6f4a55eadc9c Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-05 03:31:38 +02:00
- [P8Z77-M](asus/p8z77-m.md)
mainboard: Add support for ASUS P8Z77-M PRO desktop mainboard Add support for ASUS P8Z77-M PRO desktop mainboard Working: - Tianocore and SeaBIOS boot - PS/2 keyboard and mouse - Audio - S3 Suspend, shutdown and reboot - USB2 / USB3 - Gigabit Ethernet - SATA3, SATA2 and eSATA - NVME - CPU Temp sensors - TPM - Native raminit and also MRC - PCIe GPU in all PCIe slots (16x/8x/4x) (linux) - Integrated graphics with both libgfxinit and Intel Video OpROM (all connectors VGA/DVI-D/HDMI) Signed-off-by: Vlado Cibic <vladocb@protonmail.com> Change-Id: I47d24ac8b236f929c3160f9a769b971d83710f9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/33328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09 08:53:50 +02:00
- [P8Z77-M Pro](asus/p8z77-m_pro.md)
mb/asus/p8z77-series: Add P8Z77-V as a variant of P8Z77 series Mainboard information can be found in the included documentation. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ic56ac0e5f93a6e818ef0666e41996718471b1cf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-11 09:27:43 +02:00
- [P8Z77-V](asus/p8z77-v.md)
Documentation: Fix sphinx warnings This fixes the following warnings: mainboard/starlabs/common/flashing.md:: WARNING: image file not readable: - mainboard/starlabs/common/fwupdVersion.png - mainboard/starlabs/common/BiosLock.jpg - mainboard/starlabs/common/SwitchBranch.png cbfstool/index.md:: WARNING: document isn't included in any toctree internals/devicetree_keywords.md:: WARNING: document isn't included in any toctree mainboard/asus/wifigo_v1.md:: WARNING: document isn't included in any toctree mainboard/google/index.md:: WARNING: document isn't included in any toctree mainboard/starlabs/common/flashing.md:: WARNING: document isn't included in any toctree releases/boards_supported_on_branches.md:: WARNING: document isn't included in any toctree WARNING: None:any reference target not found: - releases/coreboot-4.16-relnotes - releases/coreboot-4.15-relnotes - releases/coreboot-4.14-relnotes - releases/coreboot-4.13-relnotes - releases/coreboot-4.12-relnotes - releases/coreboot-4.11-relnotes - releases/coreboot-4.10-relnotes - releases/coreboot-4.9-relnotes - releases/coreboot-4.8.1-relnotes - releases/coreboot-4.7-relnotes - releases/coreboot-4.6-relnotes - releases/coreboot-4.5-relnotes - releases/coreboot-4.4-relnotes - releases/coreboot-4.3-relnotes - releases/coreboot-4.2-relnotes - releases/coreboot-4.1-relnotes - ../../src/soc/intel/common/block/cse/cse.c Change-Id: I22273bc1bc34b6297cef4e594c454c2316d4215a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-05-23 02:17:06 +02:00
- [wifigo_v1](asus/wifigo_v1.md)
mainboard: Add ASUS P8H61-M LX Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-02 09:41:08 +02:00
Documentation: Add cavium SoC and mainboard * Add documentation for CN81XX SoC * Add documentation for CN81XX EVB SFF mainboard * Add documentation for BDK * Add documentation for BOOTROM and BOOTBLOCK behaviour * Alphabetically sort vendors Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-18 13:23:27 +02:00
## Cavium
Documentation: Add mainboard section to index Change-Id: Ib00bd6cdd13f164ca7eb07c9092e8d8fe17d23b1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/26266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-17 13:06:49 +02:00
Documentation: Add cavium SoC and mainboard * Add documentation for CN81XX SoC * Add documentation for CN81XX EVB SFF mainboard * Add documentation for BDK * Add documentation for BOOTROM and BOOTBLOCK behaviour * Alphabetically sort vendors Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-18 13:23:27 +02:00
- [CN81XX EVB SFF](cavium/cn8100_sff_evb.md)
Documentation: Add HP Compaq 8200 and NPCD378 Change-Id: I56db0cc11cfa5a1a537091553393542312d4f212 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26543 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25 11:04:45 +02:00
mb/clevo/kbl-u: Add Clevo N130WU/N131WU Working: - TianoCore - NVMe, SATA3 - USB2, USB3 - Thunderbolt - Graphics (GOP and libgfxinit) - Sound - Webcam - WLAN, LAN, Bluetooth, LTE - Keyboard, touchpad - TPM - flashrom support; reading / flashing from Linux - ACPI S3 WIP: - Documentation Not working: - EC ACPI (e.g. Fn keys, battery and power information) Boots Arch Linux (Linux 5.8.12) successfully. Change-Id: I364f5849ef88f43b85efbd7a635a27e54d08c513 Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/28640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2018-09-17 01:26:51 +02:00
## Clevo
- [N130WU / N131WU](clevo/n130wu/index.md)
mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF support Based on the autoport. The OptiPlex 9010 comes in four different sizes: MT, DT, SFF and USFF. Tested on SFF only. The other PCBs are slightly different, but they are designed with intercompatibility in mind. With small devicetree overrides it should work on OptiPlex 7010 and other OptiPlex 9010 variants as well. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I88d65cae30d08ca727d86d930707c2be25a527cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40351 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-13 21:42:24 +02:00
## Dell
- [OptiPlex 9010 SFF](dell/optiplex_9010.md)
Documentation/mainboard: Add emulation/spike-riscv.md Move the usage instructions from their ad-hoc place in Kconfig.name to the Documentation directory, and expand them a bit. Change-Id: Id6c7bbca40a21ecba00cab736af2f2662a985106 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-28 02:48:25 +02:00
## Emulation
The boards in this section are not real mainboards, but emulators.
- [Spike RISC-V emulator](emulation/spike-riscv.md)
Documentation: Fix spelling of "QEMU" Fix spelling and use the one from their website qemu.org. Change-Id: I36a88985ce3a7c59b732c1ca3198d86a591de6bd Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-01 02:07:34 +01:00
- [QEMU RISC-V emulator](emulation/qemu-riscv.md)
- [QEMU AArch64 emulator](emulation/qemu-aarch64.md)
- [QEMU x86 Q35](emulation/qemu-q35.md)
- [QEMU x86 PC](emulation/qemu-i440fx.md)
Documentation/mainboard: Add QEMU POWER9 to index site The QEMU POWER9 target is supported since coreboot version 4.15. Documentation is available in the tree, but it's not referenced from the mainboard index page. Fix that. Change-Id: Ic3b98735840c146cb0bfb122df0e6f762c2beeca Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-01 02:13:17 +01:00
- [QEMU POWER9](emulation/qemu-power9.md)
Documentation/mainboard: Add emulation/spike-riscv.md Move the usage instructions from their ad-hoc place in Kconfig.name to the Documentation directory, and expand them a bit. Change-Id: Id6c7bbca40a21ecba00cab736af2f2662a985106 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-28 02:48:25 +02:00
mainboard/facebook/fbg1701: Do initial mainboard commit Initial support for Facebook FBG-1701 system. coreboot implementation based on Intel Strago mainboard. Configure 'Onboard memory manufacturer' which must match HW. BUG=N/A TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701 Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-04 13:53:05 +02:00
## Facebook
- [FBG-1701](facebook/fbg1701.md)
mb/facebook/monolith: Add Facebook Monolith The board is booting Linux and has been briefly tested. SeaBIOS, TianoCore payload and Linux as payload all seem to work fine. BUG=N/A TEST=tested on Facebook Monolith Change-Id: I65a2e03334af65cfb3f825d43fa0daa6e6c75913 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-05 13:45:41 +01:00
- [Monolith](facebook/monolith.md)
mainboard/facebook/fbg1701: Do initial mainboard commit Initial support for Facebook FBG-1701 system. coreboot implementation based on Intel Strago mainboard. Configure 'Onboard memory manufacturer' which must match HW. BUG=N/A TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701 Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-04 13:53:05 +02:00
mb/foxconn/d41s: Add mainboard This supports the Foxconn d41s, d42s, d51s, d52s. The following is tested (SeaBIOS 1.12 + Linux 4.9) and works: - COM1 - S3 resume (with SeaBIOS needs sercon disabled) - Native graphic init on VGA output - SATA - USB - Ethernet - PS2 keyboard The base for this mainboard port was the Intel D510MO port. Change-Id: Ie4ec9cbf70adcdddbc2e5d805e4806825c320072 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28227 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-19 23:52:45 +02:00
## Foxconn
- [D41S](foxconn/d41s.md)
Documentation: Add Gigabyte to list of mainboards Gigabyte was not in the list of vendors in the mainboard-specific documentation. This made a newly added mainboard page difficult to locate. This commit adds Gigabyte and links said mainboard in the mainboard-specific documentation main page. Change-Id: I8839e1c1176fbdc3dd9da616f68c58e8e1cf1b16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-13 01:09:41 +02:00
## Gigabyte
Document Gigabyte GA-G41M-ES2L To replace wiki page https://www.coreboot.org/Board:gigabyte/ga-g41m-es2l + configs/config.gigabyte_ga-g41m-es2l + lshw output examples + memory modules compatibility Tested in Devuan 4 Chimaera. Tested from exact steps from this documentation. Change-Id: Ib45cfea15b43d7399e9d209f7ba7c6b24fe860dd Signed-off-by: Alexey Vazhnov <vazhnov@boot-keys.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
2021-02-07 16:35:28 +01:00
- [GA-G41M-ES2L](gigabyte/ga-g41m-es2l.md)
Documentation: Add Gigabyte to list of mainboards Gigabyte was not in the list of vendors in the mainboard-specific documentation. This made a newly added mainboard page difficult to locate. This commit adds Gigabyte and links said mainboard in the mainboard-specific documentation main page. Change-Id: I8839e1c1176fbdc3dd9da616f68c58e8e1cf1b16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-13 01:09:41 +02:00
- [GA-H61M-S2PV](gigabyte/ga-h61m-s2pv.md)
Documentation: Add HP Compaq 8200 and NPCD378 Change-Id: I56db0cc11cfa5a1a537091553393542312d4f212 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26543 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25 11:04:45 +02:00
## HP
- [Compaq 8200 Elite SFF](hp/compaq_8200_sff.md)
mb/hp: Add Z220 SFF workstation * Add initial board commit based on HP8200 SFF. * Add documentation. * Serial and PCIe slot are working. Tested on HP Z220. Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-04 15:56:44 +02:00
- [Z220 Workstation SFF](hp/z220_sff.md)
Documentation: Add cavium SoC and mainboard * Add documentation for CN81XX SoC * Add documentation for CN81XX EVB SFF mainboard * Add documentation for BDK * Add documentation for BOOTROM and BOOTBLOCK behaviour * Alphabetically sort vendors Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-18 13:23:27 +02:00
Documentation: Add HP EliteBook 8760w Also add the HP EliteBook document from wiki. Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16 11:31:08 +01:00
### EliteBook series
Doc/mb/hp: rename the document about HP laptops with KBC1126 Later EliteBooks use different EC chips and have different EC firmware interfaces, so rename the document elitebook_series.md to a more precise name and also do some rewriting. A link to the code review page for 8760w is also added because the port for this laptop is not merged yet. Change-Id: I2f9b8c4e52ed760c16977d16838cca9e490cda05 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-11 16:05:50 +02:00
- [HP Laptops with KBC1126 EC](hp/hp_kbc1126_laptops.md)
Documentation: Introduce HP Sure Start and the method to bypass it Change-Id: Id198afdaa13b4c361e1b77a56d5a2436ed1c4c86 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45577 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16 16:47:57 +02:00
- [HP Sure Start](hp/hp_sure_start.md)
mb/hp/snb_ivb_laptops: Add HP EliteBook 2170p as 2570p variant Most of the code is taken from 2570p, adjusted with autoport, SuperIO from 8470p and inteltool, GPIO config from inteltool via autoport. The laptop works well under coreboot with SeaBIOS 1.16.1 payload, running Debian GNU/Linux with kernel 6.1.15. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I854104516d5b6fbd78ee2989197000a7dbb85136 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73856 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-16 09:37:22 +01:00
- [EliteBook 2170p](hp/2170p.md)
mainboard: Add HP EliteBook 2560p Most of the code is generated by autoport. The laptop works well under coreboot with SeaBIOS 1.13.0 payload, running Arch Linux with kernel 5.4.39 and 5.6.11. Change-Id: I126916e201fb8e4b9067f2dececebfb5bae6df73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-10 17:40:00 +02:00
- [EliteBook 2560p](hp/2560p.md)
Documentation: Add HP EliteBook 8760w Also add the HP EliteBook document from wiki. Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16 11:31:08 +01:00
- [EliteBook 8760w](hp/8760w.md)
mb/hp: Add HP EliteBook Folio 9480m The code is based on autoport, with necessary modifications. This laptop uses SMSC MEC1322 embedded controller, but the EC interface is the same as the EliteBook laptops of previous generations that use KBC1126 EC. So it still uses ec/hp/kbc1126, but does not need EC firmware inserted into CBFS. We also need to leave the end of the OEM flash content untouched, so the default ROM size is set to 12MiB instead of 16MiB, and we need to modify the IFD when flashing. Thanks to persmule for providing the laptop and pointing out how to program the system flash chip of it. Change-Id: I2328c43cbb1f488aa1d0ddd9116814d971e5d8ae Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-08 13:50:55 +02:00
- [EliteBook Folio 9480m](hp/folio_9480m.md)
Documentation: Add HP EliteBook 8760w Also add the HP EliteBook document from wiki. Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16 11:31:08 +01:00
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
## Intel
- [DG43GT](intel/dg43gt.md)
mb/intel/dq67sw: Add LGA1155 microATX mainboard This is a new port for the Intel DQ67SW desktop board. It is microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3 SDRAM. A list of tested working and non-working features is in the documentation page. Change-Id: Ifc703f2d0ad45495e71d3f7799347430f5196791 Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-21 01:09:32 +02:00
- [DQ67SW](intel/dq67sw.md)
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
- [KBLRVP11](intel/kblrvp11.md)
mb/kontron: Add Kontron mAL10 COMe module support This patch adds support for the Kontron mAL10 COMe module with the Apollo Lake SoC together with Kontron T10-TNI carrierboard. Working: - UART console and I2C on Kontron kempld; - USB2/3 - Ethernet controller - eMMC - SATA - PCIe ports - IGD/DP - SMBus - HWM Not tested: - IGD/LVDS - SDIO TODO: - HDA (codec IDT 92HD73C1X5, currently disabled) Tested payloads: - SeaBIOS - Tianocore, UEFIPayload - without video, EFI-shell in console only Tested on COMe module with Intel Atom x5-E3940 processor (4 Core, 1.6/1.8GHz, 9.5W TDP). Xubuntu 18.04.2 was used as a bootable OS (5.0.0-32-generic linux kernel) Change-Id: Ib8432e10396f77eb05a71af1ccaaa4437a2e43ea Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-20 16:26:21 +02:00
## Kontron
- [mAL-10](kontron/mal10.md)
Documentation: Add basic flashing tutorial for Lenovo * Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-04 10:04:45 +02:00
## Lenovo
Documentation: Make lenovo codenames human readable Use rst parser to convert the csv to markdown tables. Change-Id: I7fd61bd7a4e8818901520311332ae4027e7a7d02 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-09 12:20:08 +02:00
- [Mainboard codenames](lenovo/codenames.md)
mb/lenovo/x220: Add x1 as a variant ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a clone of X220, with additional USB3 controller on pci-e (as i7 variant of x220), and a powered ESATA port wired to ata4 (Linux' annotation). Documentation added. Tested: - CPU i5-2520M - Slotted DIMM 8GiB - Camera - Mini pci-e on wlan slot - Msata on wwan slot - On board SDHCI connected to pci-e - USB3 controller connected to pci-e - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from SeaBIOS, or Linux payload (Heads) Not tested: - Fingerprint reader on USB2 - Onboard USB2 interfaces (wlan slot, wwan slot) Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/29434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-02 12:24:42 +01:00
- [Hardware Maintenance Manual of ThinkPads](lenovo/thinkpad_hmm.md)
mb/lenovo/{t60,r60}: Add ThinkPad R60 support as variant board - This port should be Reclaim Your Freedom compliant (not certified yet). - Untested on boards with external Radeon graphics adapter. - Some columns on the left-most side of display are completely black on 1400x1050 IPS display[1]. Display works fine on Linux. I don't know why it appears like that. So far it has been observed only with native graphics initialization. - Only GRUB2 and SeaBIOS payloads tested for now. - 2504 docking station USB doesn't work under Linux. Can detect pendrive in GRUB2 payload. - Sometimes it takes 20s of "pretending it's powered off" to run coreboot code. Issue is payload agnostic. Probably caused by missing one capacitor on my unit. [1] https://imgur.com/a/0wpMGsm Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14 Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-07 20:28:51 +02:00
- [R60](lenovo/r60.md)
Documentation: Add basic flashing tutorial for Lenovo * Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-04 10:04:45 +02:00
- [T4xx common](lenovo/t4xx_series.md)
mb/lenovo/x220: Add x1 as a variant ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a clone of X220, with additional USB3 controller on pci-e (as i7 variant of x220), and a powered ESATA port wired to ata4 (Linux' annotation). Documentation added. Tested: - CPU i5-2520M - Slotted DIMM 8GiB - Camera - Mini pci-e on wlan slot - Msata on wwan slot - On board SDHCI connected to pci-e - USB3 controller connected to pci-e - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from SeaBIOS, or Linux payload (Heads) Not tested: - Fingerprint reader on USB2 - Onboard USB2 interfaces (wlan slot, wwan slot) Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/29434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-02 12:24:42 +01:00
- [X2xx common](lenovo/x2xx_series.md)
Documentation: Spell vboot all lowercase Update all occurrences of vboot and spell it lowercase. Change-Id: I432b0db8a3dda43b71844e557a3d89180f25f1c3 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-24 08:40:45 +01:00
- [vboot](lenovo/vboot.md)
Documentation: Add basic flashing tutorial for Lenovo * Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-04 10:04:45 +02:00
mb/lenovo/x200: Add ThinkPad X301 as a variant It is similar to X200s, with U-series CPU, slightly different gpio setup, no docking support, and no superio chip. Tested: - CPU Core 2 Duo U9400 - Slotted DIMM 4GiB*2 from samsung - Camera - pci-e slots - sata and usb2 - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from Linux payload (Heads) and Seabios. TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in CB:4294 ) for h8-using devices without a dock. Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-16 17:22:10 +02:00
### GM45 series
Documentation: Add Montevina ThinkPads common page - Add a common page about Montevina ThinkPads. - Describe how to disable ME and remove its firmware on these models. - Describe vendor flash layouts. Thanks to swiftgeek for his help when writing this, especially the last paragraph and flash layouts. Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-02-16 00:35:03 +01:00
- [X200 / T400 / T500 / X301 common](lenovo/montevina_series.md)
mb/lenovo/x200: Add ThinkPad X301 as a variant It is similar to X200s, with U-series CPU, slightly different gpio setup, no docking support, and no superio chip. Tested: - CPU Core 2 Duo U9400 - Slotted DIMM 4GiB*2 from samsung - Camera - pci-e slots - sata and usb2 - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from Linux payload (Heads) and Seabios. TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in CB:4294 ) for h8-using devices without a dock. Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-16 17:22:10 +02:00
- [X301](lenovo/x301.md)
Doc/mainboard: Sort Lenovo laptop generation groups GM45 is older than Arrandale, so swap their order. Change-Id: I5b94d940c0378dd561535257d3352700fd482527 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
2020-12-12 18:59:39 +01:00
### Arrandale series
- [T410](lenovo/t410.md)
Documentation: Add basic flashing tutorial for Lenovo * Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-04 10:04:45 +02:00
### Sandy Bridge series
- [T420](lenovo/t420.md)
Documentation: Remove confusing xyz0 naming convention for Lenovo devices Replace xx30 with Ivy_Bridge and xx20 with Sandy_Bridge. Also add a note that the Ivy_Bridge tutorial doesn't covert T430s and T431s. Change-Id: I0b65bca83195ec22cc139130e7cb6183c0972484 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-16 11:28:11 +01:00
- [T420 / T520 / X220 / T420s / W520 common](lenovo/Sandy_Bridge_series.md)
Documentation: mb/lenovo: Make X1 uppercase x1 -> X1. Change-Id: Iab28e979102a6f98c41706ac0f483770466385dc Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-16 20:19:57 +01:00
- [X1](lenovo/x1.md)
Documentation: Add basic flashing tutorial for Lenovo * Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-04 10:04:45 +02:00
### Ivy Bridge series
- [T430](lenovo/t430.md)
Documentation: Add W530 / T530 Change-Id: Ib253308737f8c7a497c6ca13eab88220b1ac27ad Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/29685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-18 15:48:43 +01:00
- [T530](lenovo/w530.md)
- [W530](lenovo/w530.md)
Documentation: Remove confusing xyz0 naming convention for Lenovo devices Replace xx30 with Ivy_Bridge and xx20 with Sandy_Bridge. Also add a note that the Ivy_Bridge tutorial doesn't covert T430s and T431s. Change-Id: I0b65bca83195ec22cc139130e7cb6183c0972484 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-16 11:28:11 +01:00
- [T430 / T530 / X230 / W530 common](lenovo/Ivy_Bridge_series.md)
mainboard/lenovo/t430s: Add ThinkPad T431s as a variant The code is based on autoport and that for T430s Tested: - CPU i5-3337U - Slotted DIMM 2GiB - Soldered RAM 4GiB from samsung (There may be more models here) - Camera - pci-e and usb2 on M.2 slot with A key for wlan - sata and usb2 (no superspeed components) on M.2 slot with B key for wwan - On board SDHCI connected to pci-e - USB3 ports - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - TPM1 on LPC - EHCI debug on SSP2 (USB3 port on the left) - Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from Linux payload (Heads), Seabios may also work. Not tested: - Fingerprint reader on USB2 (not present on mine) - Keyboard backlight (not present on mine) - "sticky_fn" flag in nvram Not implemented yet: - Fn locking in nvram (may not be identical to "sticky_fn") - C-based native graphic init (since T431s has eDP instead of LVDS) - Detecting the model of Soldered RAM at runtime, and loading the corresponding SPD datum (3 observed) from CBFS (the mechanism may be similar to that on x1_carbon_gen1 and s230u, but I do not know how to find gpio ports for that, and SPD data stored in vendor firmware.) Change-Id: Ic8062cacf5e8232405bb5757e1b1d063541f354a Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/c/30021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-29 13:37:35 +01:00
- [T431s](lenovo/t431s.md)
mainboard/lenovo/x230: Add ThinkPad x230s as a variant The code is based on autoport and that for X230. Major differences are: - Only one DDR3 slot - HM77 PCH - M.2 socket instead of mini PCIe - No docking - No TPM Tested: - CPU i5-3337U - 8GiB SO-DIMM - Camera - PCIe and USB2 on M.2 slot with A key for WLAN - SATA and USB2 (no SuperSpeed components) on M.2 slot with B key for WWAN - On board SDHCI connected to PCIe - USB3 ports - libgfxinit-based graphics init - NVRAM options for North and South bridges - Sound - ThinkPad EC - S3 - Linux 4.9 within Debian GNU/Linux stable, loaded from SeaBIOS. Untested: - Touch screen, which is said to work under ubuntu but not debian. Change-Id: Id59cdc5479aaf70809dd1ca613056263661455eb Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41390 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08 10:40:48 +02:00
- [X230s](lenovo/x230s.md)
Documentation: xx30 ThinkPads internal flashing Add detailed instructions on how to unlock protected SPI ranges and flash coreboot internally on Lenovo ThinkPad Ivy Bridge series by exploiting stock BIOS security issues. Change-Id: I8d8551910c31fd2e6ff728e17dafaea45970166b Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-08 03:20:20 +01:00
- [Internal flashing](lenovo/ivb_internal_flashing.md)
Documentation: Add basic flashing tutorial for Lenovo * Add basic flashing tutorial ** Describe internal and external flashing ** Describe flash supply diode protection ** Gives general advices on flashing ** Describe how to use flashrom --ifd * Describe basic flashing on Lenovo T4xx devices ** Describe how to disassemble and access the flash IC on T4xx ** Describe flash layout on Sandy Bridge and Ivy Bridge series. Change-Id: Ia833e27f4e7d89ee32be9bed21a0c021839facec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-04 10:04:45 +02:00
mainboard: Add Lenovo ThinkPad T440p The code is based on autoport. This port is tested on a T440p without a dGPU and can boot Arch Linux from SATA disk with SeaBIOS payload. The tested components and issues are in the documentation. Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-30 15:16:50 +02:00
### Haswell series
- [T440p](lenovo/t440p.md)
Doc/mb/index.md: Fix mainboard vendor order Oops, Libretrend "stole" all the Thinkpads from Lenovo. Correct that. Change-Id: I15f189dedab98fdbea8c26ceb8ac84486df2519b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40118 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03 13:20:10 +02:00
## Libretrend
- [LT1000](libretrend/lt1000.md)
Documentation: Add MSI MS-7707 Change-Id: Iba38bda9becba9fcffb51afc4756023659f092ef Signed-off-by: Max Blau <tripleshiftone@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-07 00:18:42 +02:00
## MSI
- [MS-7707](msi/ms7707/ms7707.md)
Doc/mb/ocp: Add documentation for Tioga Pass Add OCP platform Tioga Pass documentation. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: If4c2832d5bd006c572dab035040b4242f8a3d53b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01 00:40:04 +02:00
## OCP
Documentation/mainboard: Add Missing OCP Delta Lake Link Change-Id: I379d6a7b72a0398c34ea8eeda09ccd663fc372ce Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-23 19:19:00 +02:00
- [Delta Lake](ocp/deltalake.md)
Doc/mb/ocp: Add documentation for Tioga Pass Add OCP platform Tioga Pass documentation. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: If4c2832d5bd006c572dab035040b4242f8a3d53b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01 00:40:04 +02:00
- [Tioga Pass](ocp/tiogapass.md)
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
## Open Cellular
- [Elgon](opencellular/elgon.md)
Documentation: Add PC Engines apu2 Describe how to run coreboot on the PC Engines apu2 mainboard. Change-Id: Id1d553c7f7485358960d92e714d50ba0f75b3581 Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-31 14:07:05 +02:00
## PC Engines
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
- [APU1](pcengines/apu1.md)
Documentation: Add PC Engines apu2 Describe how to run coreboot on the PC Engines apu2 mainboard. Change-Id: Id1d553c7f7485358960d92e714d50ba0f75b3581 Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-31 14:07:05 +02:00
- [APU2](pcengines/apu2.md)
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
## Portwell
mb/roda/rk9: Document flash header Change-Id: I5bd131635340ffa0c6b8979fc8e263fc5f09fdc5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-21 23:17:06 +01:00
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
- [PQ7-M107](portwell/pq7-m107.md)
mb/roda/rk9: Document flash header Change-Id: I5bd131635340ffa0c6b8979fc8e263fc5f09fdc5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-21 23:17:06 +01:00
mb/prodrive/hermes: Add new mainboard port This patch adds support for the Prodrive Hermes mainboard. Tested with CoffeeLakeFspBinPkg FSP 7.0.68.41. Untested: * CNVi * Intel Graphics Tested: * CPU Intel Xeon E2288G * CPU Intel Core i3-9100F * CPU Intel Core i7 9700KF * CPU Intel Core i7 9700E * CPU Intel Core i7 9700F * CPU Intel Core i5 9600K * CPU Intel Pentium Gold G5400 * PCIe Link Width x8 on Slot6 by changing PCIe mux * All four DDR4 slots in different configurations * USB2.0 HDR1 * USB2.0 HDR2 * USB3.0 HDR * Slot1 * Slot2 * Slot3 * Slot4 * Slot6 * M2.M NVMEe * Ethernet PHYs 0-4 * Aspeed BMC PCIe * Aspeed BMC USB * Aspeed Graphics init * USB3 backplane all working * I801 SMBUS Not Working: * Intel HDA Change-Id: Id7d051d3fa6823618691d5572087c9ae589c2862 Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-09 15:42:42 +01:00
## Prodrive
- [Hermes](prodrive/hermes.md)
documentation: Add documentation for Purism Librem Mini Change-Id: Ie5699942f48d2d5b1417f447a9a36b98e4b18156 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42882 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29 21:54:20 +02:00
## Purism
Documentation: Fix up toctree Some files weren't properly hooked up, making Sphinx complain. Change-Id: If959fa63d4ddbc3916c49c5ad6602e76b12a7e60 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55020 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-27 17:17:30 +02:00
- [Librem 14](purism/librem_14.md)
documentation: Add documentation for Purism Librem Mini Change-Id: Ie5699942f48d2d5b1417f447a9a36b98e4b18156 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42882 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29 21:54:20 +02:00
- [Librem Mini](purism/librem_mini.md)
mb/protectli/vault: Add FW2B and FW4B Braswell based boards support Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I553fd3a89299314a855f055014ca7645100e12e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-03-27 11:35:48 +01:00
## Protectli
- [FW2B / FW4B](protectli/fw2b_fw4b.md)
mb/protectli/vault_kbl: Add FW6 support Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I03e8e8db5d827fe113280f2a6376d364edf42870 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-06-27 12:19:18 +02:00
- [FW6A / FW6B / FW6C](protectli/fw6.md)
mainboard/protectli/vault_ehl: Add initial structure This patch adds base code for the Protectli VP2420. The GPIO config has been extracted with inteltool from the stock firmware and then parsed with intelp2m. As of now, the platform runs with edk2 with no apparent issues. Signed-off-by: Kacper Stojek <kacper.stojek@3mdeb.com> Signed-off-by: Artur Kowalski <artur.kowalski@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Change-Id: Ia00c27117d48b76db306d3f988f159fc5d50e4a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-10-31 12:24:35 +01:00
- [VP2420](protectli/vp2420.md)
mb/protectli/vault_cml: Add Comet Lake 6 port board support Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: If1b4f9c8245a082ff875ae9c6102a1c45e677d0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2022-09-29 00:58:43 +02:00
- [VP4630 / VP4650 / VP4670](protectli/vp46xx.md)
mb/protectli/vault: Add FW2B and FW4B Braswell based boards support Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I553fd3a89299314a855f055014ca7645100e12e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-03-27 11:35:48 +01:00
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
## Roda
Documentation: Add PC Engines apu1 Describe how to run coreboot on the PC Engines apu1 mainboard. Change-Id: If79693e893c4afe52bf1c9aa8017ac6f650a96e4 Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-21 12:14:36 +02:00
Documentation/mainboard: Fix index Remove duplicate headings, move vendor sections that were placed amidst other vendor hierarchies, and while we are at it, sort it alphabetically. Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-18 23:58:26 +02:00
- [RK9 Flash Header](roda/rk9/flash_header.md)
Documentation: Add PC Engines apu1 Describe how to run coreboot on the PC Engines apu1 mainboard. Change-Id: If79693e893c4afe52bf1c9aa8017ac6f650a96e4 Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-21 12:14:36 +02:00
Documentation: Add cavium SoC and mainboard * Add documentation for CN81XX SoC * Add documentation for CN81XX EVB SFF mainboard * Add documentation for BDK * Add documentation for BOOTROM and BOOTBLOCK behaviour * Alphabetically sort vendors Change-Id: Ibfcd42788e31f684baed658dc3c4dfe1b8e4f354 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-18 13:23:27 +02:00
## SiFive
- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
mainboard: Add Supermicro X10SLM+-F This board runs well with coreboot. The documentation part of this commit lists what works and what doesn't. Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then boots FreeBSD 11.2. It has also been tested with GRUB directly booting Debian GNU/Linux 9.6 (kernel 4.9). Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-21 12:04:18 +01:00
mainboard/starlabs: Add StarBook Mk V Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starbook-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I090971a9e8d2be5b08be886d00d304607304b645 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56088 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05 17:03:15 +02:00
## Star Labs Systems
mb/starlabs/labtop: Add LabTop Mk III Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/labtop-mk-iii-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia52566e06f50c0abcfb657044538db8e92564c36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ben McMillen <ben@starlabs.systems>
2021-10-22 15:33:27 +02:00
- [LabTop Mk III](starlabs/labtop_kbl.md)
mb/starlabs/labtop: Add LabTop Mk IV Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/labtop-mk-iv-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Idbaa907dc38dc521961806132f21b7a90324ec9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58428 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-18 22:07:20 +02:00
- [LabTop Mk IV](starlabs/labtop_cml.md)
mb/starlabs/lite: Add StarLite Mk III Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iddbf2022d03735d6a0e6d098c21643f5fdc875f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-10 22:58:04 +01:00
- [StarLite Mk III](starlabs/lite_glk.md)
mb/starlabs/lite: Add Lite Mk IV variant Tested using upstream edk2: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starlite-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id1cf2846a139004e9bec7bb27e9afe07b7e6f64f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-09 10:07:40 +01:00
- [StarLite Mk IV](starlabs/lite_glkr.md)
mainboard/starlabs: Add StarBook Mk V Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starbook-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I090971a9e8d2be5b08be886d00d304607304b645 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56088 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05 17:03:15 +02:00
- [StarBook Mk V](starlabs/starbook_tgl.md)
mb/starlabs/starbook: Add Alder Lake StarBook Mk VI variant Tested using `edk2` from `github.com/starlabsltd/edk2/tree/uefipayload_202209`: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starbook-specification Signed-off-by: Ben-StarLabs <ben@starlabs.systems> Change-Id: Idc0c265a88b19cf9e89cc8ab3e8db9abd8cf8409 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65785 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2022-07-12 13:43:27 +02:00
- [StarBook Mk VI](starlabs/starbook_adl.md)
Documentation: Fix sphinx warnings This fixes the following warnings: mainboard/starlabs/common/flashing.md:: WARNING: image file not readable: - mainboard/starlabs/common/fwupdVersion.png - mainboard/starlabs/common/BiosLock.jpg - mainboard/starlabs/common/SwitchBranch.png cbfstool/index.md:: WARNING: document isn't included in any toctree internals/devicetree_keywords.md:: WARNING: document isn't included in any toctree mainboard/asus/wifigo_v1.md:: WARNING: document isn't included in any toctree mainboard/google/index.md:: WARNING: document isn't included in any toctree mainboard/starlabs/common/flashing.md:: WARNING: document isn't included in any toctree releases/boards_supported_on_branches.md:: WARNING: document isn't included in any toctree WARNING: None:any reference target not found: - releases/coreboot-4.16-relnotes - releases/coreboot-4.15-relnotes - releases/coreboot-4.14-relnotes - releases/coreboot-4.13-relnotes - releases/coreboot-4.12-relnotes - releases/coreboot-4.11-relnotes - releases/coreboot-4.10-relnotes - releases/coreboot-4.9-relnotes - releases/coreboot-4.8.1-relnotes - releases/coreboot-4.7-relnotes - releases/coreboot-4.6-relnotes - releases/coreboot-4.5-relnotes - releases/coreboot-4.4-relnotes - releases/coreboot-4.3-relnotes - releases/coreboot-4.2-relnotes - releases/coreboot-4.1-relnotes - ../../src/soc/intel/common/block/cse/cse.c Change-Id: I22273bc1bc34b6297cef4e594c454c2316d4215a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-05-23 02:17:06 +02:00
- [Flashing devices](starlabs/common/flashing.md)
mainboard/starlabs: Add StarBook Mk V Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starbook-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I090971a9e8d2be5b08be886d00d304607304b645 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56088 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-05 17:03:15 +02:00
mainboard: Add Supermicro X10SLM+-F This board runs well with coreboot. The documentation part of this commit lists what works and what doesn't. Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then boots FreeBSD 11.2. It has also been tested with GRUB directly booting Debian GNU/Linux 9.6 (kernel 4.9). Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-21 12:04:18 +01:00
## Supermicro
Documentation/mainboard: Add Supermicro X9SAE to index site The Supermicro X9SAE target is supported since coreboot version 4.15. Documentation is available in the tree, but it's not referenced from the mainboard index page. Fix that. Change-Id: I5d3d0b5b935f1a3ea353a3d9e39208db7c7895ef Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-01 02:02:49 +01:00
- [X9SAE](supermicro/x9sae.md)
mainboard: Add Supermicro X10SLM+-F This board runs well with coreboot. The documentation part of this commit lists what works and what doesn't. Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then boots FreeBSD 11.2. It has also been tested with GRUB directly booting Debian GNU/Linux 9.6 (kernel 4.9). Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-21 12:04:18 +01:00
- [X10SLM+-F](supermicro/x10slm-f.md)
mb/supermicro/x11-lga1151-series: rework documentation This splits the x11-lga1151-series' documentation into a generic and a board specific section as a preparation for CB:35427. Additionally this adds some more information on the x11ssh board. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-23 21:54:58 +02:00
- [X11 LGA1151 series](supermicro/x11-lga1151-series/x11-lga1151-series.md)
util/supermicro: Add and use new tool smcbiosinfo The BMC and tools interacting with it depend on metadata placed inside the ROM in order the flash the BIOS. Add a new tool smcbiosinfo, integrate it into the build system, and generate a 128byte metadata file called smcbiosinfo.bin on build. You need to provide the BoardID for every SMC mainboard through a new Kconfig symbol: SUPERMICRO_BOARDID Some fields are unknown, but it's sufficient to flash it using SMC vendor tools. Tested on Supermicro X11SSH: * Flashing using the WebUI works * Flashing using SMCIPMITool works No further validation is done on the firmware. Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-20 12:53:09 +02:00
- [Flashing using the BMC](supermicro/flashing_on_vendorbmc.md)
mb/up/squared: Add mainboard Works: - bootblock, romstage, ramstage - Serial console UART0, UART1 - SPI flash console - iGPU init with libgfxinit - LAN1, LAN2 - USB2, USB3 - HDMI, DisplayPort - eMMC - flashing with flashrom externally WIP: - Documentation - VGA For some reason Seabios can not find the CBFS region and therefore it can't load seavgabios, but generally it is working as soon as Linux is booted. - ACPI Works not: - Devices needs proper configuration - Seabios can't find CBFS region Untested: - GPIO pin header - 60 pin EXHAT - Camera interface - MIPI-CSI2 2-lane (2MP) - MIPI-CSI2 4-lane (8MP) - SATA3 - USB3 OTG - embedded DisplayPort - M.2 slot - mini PCIe - flashing with flashrom internally using Linux Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-02-12 22:22:42 +01:00
Documentation: Add lemp9 to toctree Fix "WARNING: document isn't included in any toctree" by adding the lemp9 to mainboard/index.md. Change-Id: Id6d8f9e2aab6dc7ad4baf1b37d88e531acb757f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24 08:44:32 +01:00
## System76
mb/system76/addw1: Add System76 Adder Workstation 1 Change-Id: I5dd3bc320ca640728e1d86180c6bfa0dc7295760 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-20 18:18:02 +02:00
- [Adder Workstation 1](system76/addw1.md)
mb/system76/addw1: Add Adder WS 2 as a variant Change-Id: I3965a90151bd9250a87dabc715d68a39699ff9e1 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-20 18:34:14 +02:00
- [Adder Workstation 2](system76/addw2.md)
mb/system76/rpl: Add Adder WS 3 as a variant The Adder Workstation 3 (addw3) is a Raptor Lake-HX board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots with 5200 MT/s memory - Both M.2 SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Not working: - Discrete/Hybrid graphics - Thunderbolt Change-Id: I165a434fe18f8c0aac49cb872bb87f98551d8f2c Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21 17:41:48 +02:00
- [Adder Workstation 3](system76/addw3.md)
mb/system76/bonw14: Add System76 Bonobo Workstation 14 Change-Id: I55a827f8d6a5421c36f77049935630f4db4ba04d Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-10-27 23:45:41 +02:00
- [Bonobo Workstation 14](system76/bonw14.md)
mb/system76/cml-u: Add Darter Pro 6 as a variant Change-Id: I9ba7d2af3c9c298fda2b2997d52546cc2f702a82 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-02 21:49:55 +02:00
- [Darter Pro 6](system76/darp6.md)
mb/system76/darp7: Add System76 Darter Pro 7 https://tech-docs.system76.com/models/darp7/README.html Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - MicroSD card reader - All USB ports - USB-PD - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DP over USB-C output - Internal microphone - Internal speakers - Combined 3.5mm headphone/microphone jack - S0ix suspend* - Booting to Ubuntu Linux 21.04 and Windows 10 - Flashing with flashrom Not working: - S0ix when a device is attached to the TBT port Not tested: - Thunderbolt functionality Change-Id: I80e5c5375f9d3881fc89a45a91ba68ed2e104a93 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52349 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-06 18:41:44 +02:00
- [Darter Pro 7](system76/darp7.md)
mb/system76/adl-p: Add Darter Pro 8 The Darter Pro 8 (darp8) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Windows 10 and Linux 6.1 - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined header + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 5.18.5 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Detection of devices in TBT slot on boot Change-Id: Icc84d6cc3aec7149d9b538305288bbe2b56d53e4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-01 18:59:02 +01:00
- [Darter Pro 8](system76/darp8.md)
mb/system76/rpl: Add Darter Pro 9 as a variant The Darter Pro 9 (darp9) is a Raptor Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots with 5200 MT/s memory - Both M.2 SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined 3.5mm headphone + mic audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Change-Id: If19caa90e5f90939b2946392da343b7f91f568ca Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75278 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-14 18:11:07 +02:00
- [Darter Pro 9](system76/darp9.md)
mb/system76/cml-u: Add System76 Galago Pro 4 Change-Id: I3dfa2ab430439d8dc71531b92aa7800db94d603b Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-01 23:49:33 +02:00
- [Galago Pro 4](system76/galp4.md)
mb/system76/galp5: Add System76 Galago Pro 5 https://tech-docs.system76.com/models/galp5/README.html Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - Internal microphone - Internal speakers - Combined 3.5mm headphone/microphone jack - S0ix suspend* - Booting to Pop!_OS Linux 21.04 and Windows 10 - Flashing with flashrom Not working: - Discrete/Hybrid graphics - S0ix when a device is attached to the TBT port Change-Id: I0d9052c0b064d4d43812ad837578d4a097149cc8 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-06 21:11:18 +02:00
- [Galago Pro 5](system76/galp5.md)
mb/system76/adl-p: Add Galago Pro 6 as a variant The Galago Pro 6 (galp6) is an Alder Lake-P board. Tested with a custom edk2 UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - All USB ports - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Windows 10 and Linux 6.1 - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.0.6 - Internal flashing with flashrom v1.2-1087-gde016a17 Not working: - Detection of devices in TBT slot on boot Change-Id: I8940fb3777d7f18393ef50baec32f9445b375648 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2022-11-28 17:17:55 +01:00
- [Galago Pro 6](system76/galp6.md)
mb/system76/rpl: Add Galago Pro 7 as a variant The Galago Pro 7 (galp7) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - M.2 NVMe SSD - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Windows 10 and Linux 6.2 - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Not working: - Detection of devices in TBT slot on boot Change-Id: I1ae3b2c647aa75976a1ea97f7681f93eb000ba8a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75277 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23 23:26:45 +02:00
- [Galago Pro 7](system76/galp7.md)
mb/system76/gaze15: Add System76 Gazelle 15 Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux 20.10 and Windows 10 Not working: - Discrete/Hybrid graphics This requires a new driver to work correctly, which will be added and enabled later. Change-Id: I10667fa26ac7c4b8eb67da11f3e963062bd0db47 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47822 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-25 19:06:35 +01:00
- [Gazelle 15](system76/gaze15.md)
mb/system76/gaze16: Add System76 Gazelle 16 https://tech-docs.system76.com/models/gaze16/README.html The gaze16 comes in 3 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet controller - NVIDIA RTX 3060, using Realtek Ethernet controller - NVIDIA RTX 3060, using onboard Intel I219-V Ethernet controller Tested on the 3050 variant. Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - 2.5" SSD - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio* - 3.5mm microphone input* - S3 suspend/resume - Booting to Pop!_OS Linux 21.04 and Windows 10 20H2 - Flashing with flashrom Not working: - Discrete/Hybrid graphics - Mini DisplayPort output (requires NVIDIA GPU) - 3.5mm audio input/output detection on Windows Change-Id: Ifb90f9b73a10abf53a21738e2c466d539df9a37c Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-01 21:07:07 +01:00
- [Gazelle 16](system76/gaze16.md)
mb/system76/adl: Add Gazelle 17 as a variant The gaze17 comes in 2 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet Controller - NVIDIA RTX 3060, using onboard I219-V Ethernet Controller Tested with a custom TianoCore UefiPayloadPkg payload. Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - MicroSD card reader - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting to Pop!_OS Linux 22.04 with kernel 6.2.6 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Discrete/Hybrid graphics: Requires NVIDIA driver - mDP/HDMI displays on 3060 variant: Requires NVIDIA driver - Detection of devices in TBT slot on boot - S3 suspend: MP init eventually fails Not tested: - Thunderbolt devices Change-Id: Ib12ac47e8f34004f72e6234039823530511baea7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-24 15:48:37 +01:00
- [Gazelle 17](system76/gaze17.md)
mb/system76/rpl: Add Gazelle 18 The Gazelle 18 (gaze18) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots - M.2 NVMe SSD slot - M.2 SATA SSD slot - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.6 Not working: - Discrete/Hybrid graphics Change-Id: I4599bf12c0f3048f9328f336cc8971400f5fd1a0 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-05-16 20:41:31 +02:00
- [Gazelle 18](system76/gaze18.md)
mb/system76/lemp10: Add System76 Lemur Pro 10 https://tech-docs.system76.com/models/lemp10/README.html Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - DIMM slot and onboard RAM - Both M.2 NVMe SSDs - MicroSD card reader - All USB ports - USB-PD - Webcam - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DP over USB-C output - Internal microphone - Internal speakers - Combined 3.5mm headphone/microphone jack - S0ix suspend* - Booting to Pop!_OS Linux 21.04 and Windows 10 - Flashing with flashrom Not working: - S0ix when a device is attached to the TBT port Change-Id: I15f7a3b6e9af07fcfde9a71d3f4a84ed625159b7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-13 17:46:12 +02:00
- [Lemur Pro 9](system76/lemp9.md)
- [Lemur Pro 10](system76/lemp10.md)
mb/system76/adl: Add Lemur Pro 11 as a variant The Lemur Pro 11 (lemp11) is an Alder Lake-U board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - DIMM slot (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - On-board RAM: Requires CB:65567 - Detection of devices in TBT slot on boot Change-Id: Ic930df1ebacc8c7ef14dbb6c67a97eddb918b365 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-02 17:17:59 +01:00
- [Lemur Pro 11](system76/lemp11.md)
mb/system76/oryp5: Add System76 Oryx Pro 5 Tested with TianoCore payload (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both NVMe ports - SATA port - All USB ports - Webcam - Ethernet - Integrated graphics - Internal microphone - S3 suspend/resume - Flashing with flashrom - Booting to Ubuntu Linux and Windows Not working: - Discrete/Hybrid graphics - Internal speakers These two require new drivers to work correctly, which will be added and enabled later. Change-Id: Iae6e530dcd52df3642cdfe74b65bfff5aa0dd402 Signed-off-by: Tim Crawford <tcrawford@system76.com> Signed-off-by: Jeremy Soller <jeremy@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-26 19:50:36 +01:00
- [Oryx Pro 5](system76/oryp5.md)
mb/system76/oryp6: Add System76 Oryx Pro 6 https://tech-docs.system76.com/models/oryp6/README.html Tested with TianoCore (UefiPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe - M.2 SATA - MicroSD card slot - All USB ports - Integrated graphics using Intel GOP driver - Webcam - Ethernet - Internal microphone - Combined headphone + mic 3.5mm jack - Combined microphone + S/PDIF 3.5mm jack - Booting to Ubuntu Linux 20.10 and Windows 10 - Flashing with flashrom Not working: - S3 suspend/resume: System hangs on wake from S3 - Discrete/Hybrid graphics: Requires a new driver - Internal speakers: Enabled in separate patch Not tested: - Thunderbolt functionality - S/PDIF output Change-Id: If017d65ca6cb36fe1f631d4dadd050a1547c93fa Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47768 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-01 03:25:14 +02:00
- [Oryx Pro 6](system76/oryp6.md)
mb/system76/oryp6: Add Oryx Pro 7 as a variant Change-Id: Id00a45a6a6acf0880934c55f1a3f18e63f2aed43 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-08-06 19:03:09 +02:00
- [Oryx Pro 7](system76/oryp7.md)
mb/system76/oryp8: Add System76 Oryx Pro 8 https://tech-docs.system76.com/models/oryp8/README.html Tested with TianoCore (UeifPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both M.2 SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined 3.5mm headphone & microphone jack - Combined 3.5mm microphone & S/PDIF jack* - S3 suspend/resume - Booting to Pop!_OS Linux 21.10 and Windows 10 20H2 - Flashing with flashrom Not working: - Discrete/Hybrid graphics Not tested: - Thunderbolt functionality - S/PDIF output Change-Id: Iabc8e273f997d7f5852ddec63e0c1bf0c9434acb Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-10-13 16:16:04 +02:00
- [Oryx Pro 8](system76/oryp8.md)
mb/system76/adl: Add Oryx Pro 9 as a variant The Oryx Pro 9 (oryp9) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - Both M.2 NVME SSD slots (with MZVL2500HCJQ) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - Discrete/Hybrid graphics - HDMI output (requires NVIDIA GPU) - Mini DisplayPort output (requires NVIDIA GPU) - Detection of devices in TBT slot on boot Change-Id: I8aac3e83f4423f444cb9ce8aa562ba465eb718c1 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-02 17:23:11 +01:00
- [Oryx Pro 9](system76/oryp9.md)
mb/system76/adl-p: Add Oryx Pro 10 as a variant oryp10 is nearly identical to the oryp9, with the differences being: - Uses DDR5 RAM instead of DDR4 RAM - Uses Realtek ALC1306 instead of TI TAS5825M - Has an option for OLED display Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-02 17:44:40 +01:00
- [Oryx Pro 10](system76/oryp10.md)
mb/system76/rpl: Add Oryx Pro 11 as a variant The Oryx Pro 11 (oryp11) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots - Both M.2 NVMe SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Change-Id: I0d29e03cdde523a95ae6d174a9948f4c119cca6e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-24 00:01:24 +02:00
- [Oryx Pro 11](system76/oryp11.md)
mb/system76/rpl: Add Serval WS 13 as a variant The Serval Workstation 13 (serw13) is a Raptor Lake-HX board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 Keyboard - I2C HID touchpad - Both DIMM slots with 5200 MT/s memory - Both M.2 SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined 3.5mm headphone + mic audio output - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Not working: - Discrete/Hybrid graphics - Thunderbolt Change-Id: Id709a7d06854ba9de673d5e3f25c0a1bbcc53d21 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73440 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-06 22:16:23 +02:00
- [Serval Workstation 13](system76/serw13.md)
Documentation: Add lemp9 to toctree Fix "WARNING: document isn't included in any toctree" by adding the lemp9 to mainboard/index.md. Change-Id: Id6d8f9e2aab6dc7ad4baf1b37d88e531acb757f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24 08:44:32 +01:00
Documentation: Add Beaglebone Black documentation Change-Id: If1a9808d1f20ee61048182d416f25e9a81c631af Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-08-09 08:55:39 +02:00
## Texas Instruments
- [Beaglebone Black](ti/beaglebone-black.md)
mb/up/squared: Add mainboard Works: - bootblock, romstage, ramstage - Serial console UART0, UART1 - SPI flash console - iGPU init with libgfxinit - LAN1, LAN2 - USB2, USB3 - HDMI, DisplayPort - eMMC - flashing with flashrom externally WIP: - Documentation - VGA For some reason Seabios can not find the CBFS region and therefore it can't load seavgabios, but generally it is working as soon as Linux is booted. - ACPI Works not: - Devices needs proper configuration - Seabios can't find CBFS region Untested: - GPIO pin header - 60 pin EXHAT - Camera interface - MIPI-CSI2 2-lane (2MP) - MIPI-CSI2 4-lane (8MP) - SATA3 - USB3 OTG - embedded DisplayPort - M.2 slot - mini PCIe - flashing with flashrom internally using Linux Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-02-12 22:22:42 +01:00
## UP
- [Squared](up/squared/index.md)