Not selecting POWER_STATE_DEFAULT_ON_AFTER_FAILURE brings Cezanne that
is currently the only SoC using this functionality in line with Picasso
where the default is that the board remains in power off mode after
power was lost and later restored. Boards can change this behavior by
selecting POWER_STATE_OFF_AFTER_FAILURE, POWER_STATE_ON_AFTER_FAILURE or
POWER_STATE_PREVIOUS_AFTER_FAILURE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic96f40e3c9867cd821e58d752f58b763930f6d0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Without this being selected, mainboards can't select
MAINBOARD_POWER_STATE_PREVIOUS to use the power state restoration code
path in pmlib.c
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I753659fa753e03a66b6c6b2eb97e7ef20c71ca57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52299
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The first CSE Lite SKU is available, therefore enable the Kconfig
option to have the CSE reboot the system into its RW FW during a cold
boot.
BUG=b:183826781
TEST=50 cold reboot cycles
Cq-Depend: chrome-internal:3758108
Change-Id: Ib3a1a9f8ac51bdab8858b2764d5bc0f6f07987cc
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Gerrit is able to add reviewers based on entries in the `MAINTAINERS`
file. For inclusion and exclusion matches either paths or regular
expressions can be used. The syntax is described in the header of the
file.
When matching a path, there are two sensible possibilities:
- `path/to/file` matches a file.
- `path/to/dir/` matches a folder including its contents recursively.
- `path/to/dir/*` matches all files in that folder, without recursing
into its subfolders.
The trailing slash in the second example is essential. Without it, only
the directory entry itself matches when, for example, the folder gets
deleted, renamed or its permissions get modified. Reviewers in the list
won't get added to changes of any files or directories below that path.
However, from time to time entries get added without this trailing
slash. Thus, implement a workaround in `maintainers.go` to check, if a
path entry is actually a directory. In such case a trailing slash gets
appended, so that the contents will match, too.
Example: `path/to/dir` will become `path/to/dir/`
Tests:
1. output before and after does not differ
2. manual test of resulting regex when running `maintainers.go`
Change-Id: Ic712aacb0c5c50380fa9beeccf5161501f1cd8ea
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52276
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
maintainers.go does not handle globs as described in MAINTAINERS.
Instead of only matching the files inside a directory, it also matches
everything below. Also, a glob used in between (`e.g. path/to/*/dir`)
could lead to matching many more paths unexpectedly.
This is caused by the way paths using globs are converted to regegular
expressions for use with gerrit:
1. The script converts all paths with trailing slash to a path with
trailing glob. That means, a recursive match on a directory gets
converted to match only the files in the directory (at least
according to the documentation - if there wasn't 2).
Example: `path/to/dir/` becomes `path/to/dir/*`
2. When converting the path to a regex, all globs get converted to
prefix matching by replacing the glob by `.*`. Instead of only
matching the files in the directory, everything below matches,
which is a) not what the documentation states and b) the opposite
of what 1. did first.
Example: `path/to/dir/*` becomes `^path/to/dir/.*$`
In sum, this leads to all sorts of issues. Examples:
- `path/*/dir` becomes `^path/.*/dir$`
- `path/to/dir/*` becomes `^path/to/dir/.*$`
- `path/to/*.c` becomes `^path/to/.*\.c$`
This change fixes that behaviour by:
- dropping the wrong conversion from 1. above.
- fixing glob matching by replacing `*` by `[^/]`.
- handling paths with trailing `/` as prefix, as documented.
The change was not split because these changes depend on each other and
splitting would break recursive matching between the commits.
Tests:
1. diffed output before and after is equal (!= the same)
2. manual testing of glob matching
Change-Id: I4347a60874e4f07e41bdee43cc312547bea99008
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Lillipup add two sku for OLED panel.
Additional VBT is necessary to modify PWM source from VESA eDP AUX
interface
BUG=b:183630802
TEST=emerge-volteer coreboot-private-files-baseboard-volteer
check vbt_oled.bin is under build folder and check in CPU log.
Cq-Depend: chrome-internal:3744227
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: I576297b8296def3c37a01ae0223fa332aa9f02b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52150
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The attribute was missing in case the console is disabled.
Change-Id: Iee23f6f4da61cd3637441705a8d3bbd2da7a33ca
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52231
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch changes the Intel MMA driver to use the new CBFS API.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Icc11d0c2a9ec1bd7a1d6af362f849dac16375433
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch ports the last remaining use of cbfs_boot_locate() in the
Intel FSP drivers to the new CBFS API. As a consequence, there is no
longer a reason for fsp_validate_component() to operate on rdevs, and
the function is simplified to take a direct void pointer and size to a
memory-mapping of the FSP blob instead.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If1f0239eefa4542e4d23f6e2e3ff19106f2e3c0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52281
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch changes the vboot EC sync code to use the new CBFS API. As a
consequence, we have to map the whole EC image file at once (because the
new API doesn't support partial mapping). This should be fine on the
only platform that uses this code (Google_Volteer/_Dedede family)
because they are x86 devices that support direct mapping from flash, but
the code was originally written to more carefully map the file in
smaller steps to be theoretically able to support Arm devices.
EC sync in romstage for devices without memory-mapped flash would be
hard to combine with CBFS verification because there's not enough SRAM
to ever hold the whole file in memory at once, but we can't validate the
file hash until we have loaded the whole file and for performance (or
TOCTOU-safety, if applicable) reasons we wouldn't want to load anything
more than once. The "good" solution for this would be to introduce a
CBFS streaming API can slowly feed chunks of the file into a callback
but in the end still return a "hash valid/invalid" result to the caller.
If use cases like this become pressing in the future, we may have to
implement such an API.
However, for now this code is the only part of coreboot with constraints
like that, it was only ever used on platforms that do support
memory-mapped flash, and due to the new EC-EFS2 model used on more
recent Chrome OS devices we don't currently anticipate this to ever be
needed again. Therefore this patch goes the easier way of just papering
over the problem and punting the work of implementing a more generic
solution until we actually have a real need for it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I7e263272aef3463f3b2924887d96de9b2607f5e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52280
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The prototype of gpio_add_events() is provided by that header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia384c9297ac1e24bf0b1bcce048012a247406f39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52274
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Guybrush complains that this is missing during the boot, so add it to
cezanne. I verified that the registers in gpio.c are correct.
BUG=b:184549804
TEST=Build and boot
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de3764c99fe89b962db88065575463b365ddaf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Since Cezanne needs the exact same code, move it to the common directory
and add a Kconfig option to add this functionality to the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I04c4295071a3df7afcb4dfd5435b11fb0bf6963f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have
to be set up as generic range. Drop the entry from clevo/cml-u, which
has been forgotten in commit c5f1dc9.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I05844db4cfe96e6075bd6526ffc242973a2082c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Add missing initialization of tag and size fields. Include initial size
value in assertion in test_bootmem_write_mem_table().
Found-by: Coverity CID 1452250
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I27678a4eb01a0e6bedd0ba8c4b22a1b01afeaf12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Gerrit is able to add reviewers based on entries in the `MAINTAINERS`
file. For inclusion and exclusion matches either paths or regular
expressions can be used. The syntax is described in the header of the
file.
When matching a path, there are two sensible possibilities:
- `path/to/file` matches a file.
- `path/to/dir/` matches a folder including its contents recursively.
- `path/to/dir/*` matches all files in that folder, without recursing
into its subfolders.
The trailing slash in the second example is essential. Without it, only
the directory entry itself matches when, for example, the folder gets
deleted, renamed or its permissions get modified. Reviewers in the list
won't get added to changes of any files or directories below that path.
Thus, add a linter script to ensure a path match on a directory always
ends with `/` or `/*` as shown above.
Change-Id: I9873184c0df4a0b4455f803828e2719887e545db
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
DPTF HIDs are different per-platform going forward, so refactor these
into SoC-specific structures which the DPTF driver can query at runtime
for platform-specific information.
Change-Id: I6307f9d28f4274b851323ad69180ff4ae35053da
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Instead of counting consecutive matches (in `j`), check for a second
match directly in the control flow. Also, add some dedicated variables:
* `tap`: Keeps track of the tap value that resulted in a match and
is eventually programmed into the hardware.
* `tap2`: Is just temporarily used to search for another edge.
Keeping `tap` sync'ed with the hardware has the benefit that we don't
need to read the programmed value back for later fixups.
Change-Id: I3ae541c39efdc695f5ca74bc757b2f009239ec93
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Move the last block of the sync DLL programming up. It's independent
of the switch/case statement that it's moved around.
Change-Id: I71bc1ca1c629e4f2f4a13474c7e2c22d1a3b65d9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
When EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG is enabled and SSFC is
not set, all fw_config is invalidated. But for some platform this may
not be necessary, we can treat missing SSFC as zero and use other 32
bits of firmware config.
BUG=b:184809649
TEST=boot and check fw_config is not -1 even if ssfc is not set
BRANCH=zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I21c7b0d449a694d28ad7b3f14b035e3a5830030a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Port 80 (actually 0x80-0x8f) is a fixed I/O range and thus does not have
to be set up as generic range. Drop the entries from the devicetrees.
Change-Id: I8a54d3c35a321a2d57bd846662f7339eff53e5a8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Sync from guybrush.
BUG=b:182211161
TEST=builds
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ica4e6511a5106a958567565b96d5888b8c829ff2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
use PicassoGenericVbios.bin as default instead of raven VBIOS for
Bilby.
Change-Id: I99621173a33a1154f8bb4929d199288265bbe04d
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52209
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit enables HECI such that interface can be used from
userspace on the dedede mainboards.
BUG=b:184219504
TEST=Build and flash drawcia, verify that Intel Flash Programming Tool
can communicate with the Converged Security Engine.
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Change-Id: I5b28c471d6554a5e14538073d48ef47da05936fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Verified that all accessed registers exist in all SoCs that use this
code (Carrizo, Mullins, Stoneyridge, Picasso and Cezanne at the moment)
and that the bit definitions match as well. Also at the time of writing
this patch only Picasso calls gpio_fill_wake_state, so dropping the
check won't change behavior. This also avoids having SoC specific code
that doesn't get selected by Kconfig options in the common AMD SoC
directory and also avoids having to add a check for SOC_AMD_CEZANNE to
support this functionality on Cezanne in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If770780a67776daf81744db1b635ffd402653a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52223
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is no nb/amd/pi northbridge left in coreboot that could be paired
with the Bolton FCH, since the remaining nb/amd/pi northbridges all use
an integrated FCH (Avalon on Mullins and Kern on Carrizo) while Bolton
is a discrete FCH. I ran into this when verifying if the common soc/amd
GPIO functionality that gets added by selecting
SOC_AMD_COMMON_BLOCK_BANKED_GPIOS is valid for all chips selecting it
and that code isn't valid for Bolton that uses the old GPIO 100
interface.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iffe876bee96e42645e1be10730b78959b1c06d59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52222
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To update the sx9324 registers after RF team fine-tuned the parameters.
BUG=b:172397658
BRANCH=firmware-zork-13434.B
TEST=build coreboot and verify the sx9324 function
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ief85bc61952144a1d7a151100d89938517078ab4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51936
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity reported false-positive possible memory overrun
in setup_calloc_test(). Change memset address to use actual
buffer instead of pointer stored in symbol value in order
to silence Coverity.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I19f0718c657d565e515157e66367573e08f51254
Found-by: Coverity CID 1452005
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52136
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream edk2 dropped separate 32-bit support for UefiPayloadPkg, and
removed the architecture suffix from the package dsc filename.
Test: build/run qemu with CONFIG_TIANOCORE_UEFIPAYLOAD selected.
Change-Id: I40077f1d370f0cb5627645b305b57e6c71e44095
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The logic for bytes to copy to the function input pointer was wrong.
What it did was to loop over all 2 bytes that need to be read and only
copy the first byte.
Change-Id: Ic08cf01d800babd4a9176dfb2337411b789040f3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
The patch enables Bluetooth config in the devicetree and removes
non-existent Bluetooth PCI interface.
TEST=Verified by checking Garfield Peak controller's PID:VID(8087:0033) in
the lsusb ouput.
Output of lsusb:
Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. USB 10/100/1000 LAN
Bus 004 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. 4-Port USB 3.0 Hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0781:55a9 SanDisk Corp. Dual Drive
Bus 003 Device 004: ID 413c:2113 Dell Computer Corp. Dell KB216 Wired Keyboard
Bus 003 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. 4-Port USB 2.0 Hub
Bus 003 Device 005: ID 8087:0033 Intel Corp.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I7a54d344ef1b0418bee56e7308977a61604b954a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52182
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure the power state to return to when the power is re-applied
after power failure.
BUG=b:183739671
TEST=Build and Boot to OS in Majolica and Guybrush. By default when the
power fails the device turns on after power is re-applied. When the
POWER_ON_AFTER_POWER_FAILURE is disabled, the device remains off even
after the power is re-applied.
Change-Id: I21c5da08c82156d6239450ef6921771da74cbaa1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52049
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Introduce a power management library to handle the power resume after
power failure. Enable HAVE_POWER_STATE_AFTER_FAILURE config when this
library is enabled.
BUG=b:183739671
TEST=Build Guybrush and Majolica mainboard.
Change-Id: Iea4ea57d747425fe6714d40ba6e60f2447febf28
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add GRXS and GTXS support. Move the gpio method into common place.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I8ba377179d6976cf26ed0dc521d8e4eff051dc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
To enable WWAN we want to release it from reset start.
BUG=b:180166408
TEST=WWAN enumerates on brya
Change-Id: I4f9884d3b2fc8822dda1a6fe743c863aa6c696da
Signed-off-by: Alex Levin <levinale@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52199
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This option is not referenced anywhere. Drop it.
Change-Id: Ie59de5399a9b1713109bf334d4ad1d7f7efb91f9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52104
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Felix Held