Commit Graph

162 Commits

Author SHA1 Message Date
Patrick Georgi 436f99b72a Eliminate special case id.inc/id.lds in favor of a configuration variable ID_SECTION_OFFSET
which is normally set to 0x10 (the current default) and set to 0x80 (the current alternative)
where necessary (if romstraps get in the way).
For Kconfig, the special case is set per southbridge (as these define the necessity for this
workaround), for newconfig it's added to each single board.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-27 16:55:13 +00:00
Patrick Georgi 4638c924f0 Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_ID
Usually, this means adding values to Kconfig, but in a few cases, adding values
to newconfig, too (which doesn't hurt).

Also really hook up tyan/s2850 and tyan/s2875 to kconfig, and have them still
build.

Trivial and stupid kconfig changes, just lots of them.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4959 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-27 11:03:20 +00:00
Myles Watson d27c08c289 Remove drivers/pci/onboard. The only purpose was for option ROMs, which are
now handled more generically using CBFS.

Simplify the option ROM code in device/pci_rom.c, since there are only two ways
to get a ROM address now (CBFS and the device) and add an exception for qemu.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06 23:42:26 +00:00
Myles Watson 1d6d45e3c9 Split the two usages of __ROMCC__:
__ROMCC__ now means "Don't use prototypes, since romcc doesn't support them."
__PRE_RAM__ means "Use simpler versions of functions, and no device tree."

There are probably some places where both are tested, but only one is needed.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4921 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-11-06 17:02:51 +00:00
Myles Watson e21f75a8c3 cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.inc
Make more boards use both of them.

Trivial.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-26 22:49:00 +00:00
- supermicro/x6dhe_g/auto.c d1327ce963 Major cleanups of the hard_reset() code and config in coreboot.
- Drop unused "#object reset.o" entries.

 - Use CONFIG_HAVE_HARD_RESET for all "object reset.o" entries.

 - Drop dead/commented code, i.e. useless hard_reset() from:
   - supermicro/x6dhe_g/auto.c
   - supermicro/x6dhe_g2/auto.c
   - supermicro/x6dhe_g2/auto.updated.c
   - supermicro/x6dhr_ig/auto.c
   - supermicro/x6dhr_ig2/auto.c
   - digitallogic/msm586seg/auto.c
   - dell/s1850/auto.c

 - Add "obj-$(CONFIG_HAVE_HARD_RESET) += reset.o" to kconfig files of boards
   that actually have a reset.c file.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4849 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-24 19:17:24 +00:00
Myles Watson 036c15fe71 Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before
RAM is initialized, and no one does it.  Trivial.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4830 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-23 22:53:26 +00:00
Myles Watson 8f74c5878d Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be
selected in sockets, and they aren't used yet.

Add a couple of variables to src/Kconfig for lack of a better place so that
their selects work.
Add select statements according to newconfig for some variables that were
defined but never selected in mainboard configs.

Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20 16:10:04 +00:00
Uwe Hermann 4e015eb674 Fix all board names in Kconfig as per wiki / vendor website.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4815 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-20 13:55:35 +00:00
Uwe Hermann d65509de14 Set default ROM sizes per-board to match the ROM chip that came
with the respective board.

Of course, the user can still override the size in menuconfig.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4790 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 17:37:20 +00:00
Myles Watson b8e2027be8 Add CONFIG_GENERATE_* for tables so that the user can select which tables not
to build, but by default all the tables that are available are built.

Make PIRQ table build for qemu.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-15 13:35:47 +00:00
Uwe Hermann 869bbc4616 Convert all "default y" options to "select FOO" (shorter).
Also, drop per-board CONSOLE_VGA/PCI_ROM_RUN while I'm at it, they're
global options in kconfig.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07 16:29:12 +00:00
Patrick Georgi 0e9a92545d Various fixes to Kconfig: All kconfig-boards should have a
complete set of variables now, though they might still have
the wrong values.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-06 20:48:07 +00:00
Patrick Georgi 24796fd364 This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.
Both were only really used in pre-cbfs, as the payload's size isn't
relevant for the build process anymore.

Various calculations in {no,}failovercalculation.lb are adapted
accordingly.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4720 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-04 18:55:40 +00:00
Patrick Georgi 37ea341079 Move HAVE_FAILOVER_BOOT and USE_FAILOVER_IMAGE from
boards to global. It's not a per-board value, but
compatibility stuff.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03 21:04:13 +00:00
Patrick Georgi 6768f39a4b Remove:
- CONFIG_CBFS
- anything that's conditional on CONFIG_CBFS == 0
- files that were only included for CONFIG_CBFS == 0
In particular:
- elfboot
- stream boot code
- mini-filo and filesystems (depends on stream boot code)

After this commit, there is no way to build an image that is not using
CBFS anymore.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4712 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03 16:24:58 +00:00
Uwe Hermann 8f3ec7b1a3 Remove duplicate and not too useful Kconfig board comments as
per discussion on the mailing list.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-03 15:34:08 +00:00
Uwe Hermann 120bff83ff Fix a number of board names in Kconfig (trivial).
Also, simplify the M2V-MX SE Kconfig file a bit while I'm at it.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4688 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-29 18:15:06 +00:00
Patrick Georgi 6842c0293c Remove MAINBOARD_OPTIONS, which is a relic from early
kconfig development.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4687 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-29 17:28:13 +00:00
Patrick Georgi 88f55b2c12 some progress on kconfig:
- northbridges are done
- southbridges are done
- Intel CPUs are done, with a design that the board only has to specify
  the socket it has, and the CPUs are pulled in automatically. There is
  some more cleanup possible in that area, but I'll do that later
- a couple more mainboards compile:
  - intel/eagleheights
  - intel/jarrell
  - intel/mtarvon
  - intel/truxton
  - intel/xe7501devkit
  - sunw/ultra40
  - supermicro/h8dme
  - tyan/s2850
  - tyan/s2875
  - via/epia
  - via/epia-cn
  - via/epia-m
  - via/epia-m700
  - via/epia-n
  - via/pc2500e
(PPC not considered, probably overlooked something)

All of them only _build_, but some options are probably completely
wrong. To be fixed later

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4673 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-25 18:43:02 +00:00
Stefan Reinauer c13093b148 simplify source tree hierarchy: move files from sdram/ and ram/ to lib/
It's only three files. Also fix up all the paths (Gotta love included C files)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4661 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-23 18:51:03 +00:00
Patrick Georgi 0588d19abe Kconfig!
Works on Kontron, qemu, and serengeti. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>

tested on abuild only. 

Acked-by: Ronald G. Minnich <rminnich@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 15:00:51 +00:00
Patrick Georgi b339e10f04 Enable CBFS everywhere. All boards compiled for me (abuild tested),
and we will fix issues as they appear.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-11 17:35:02 +00:00
Stefan Reinauer 9dd27bc03a the tool chain settings should not be in renamed (as they will never live in
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 17:13:58 +00:00
Stefan Reinauer 0867062412 This patch unifies the use of config options in v2 to all start with CONFIG_
It's basically done with the following script and some manual fixup:

VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
	find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-30 15:17:49 +00:00
Carl-Daniel Hailfinger cff071ab0e When I started refactoring mainboard Config.lb, I added two different
files for targets without failover:
src/config/nofailovercalculation.lb (64 kB XIP)
src/config/nofailovercalculation128.lb (128 kB XIP)
Targets with other XIP sizes were ignored.

This patch moves XIP size back into mainboard code.

Benefits from this patch:
- src/config/nofailovercalculation128.lb is no longer needed
- Targets with XIP sizes besides 64k and 128k benefit from refactoring
- Conceptually, this makes the include files pure calculation files
without settings.

Abuild tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-06 16:50:38 +00:00
Luc Verhaegen a9c5ea08d0 Revert "CMOS: Add set_option and rework get_option."
This reverts commit eb7bb49eb5b48c39baf7a256b7c74e23e3da5660.

Stepan pointed out that "s" means string, which makes the following statement
in this commit message invalid: "Since we either have reserved space (which
we shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go."

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 14:19:33 +00:00
Luc Verhaegen 9ceae905f1 CMOS: Add set_option and rework get_option.
To ease some of my debugging pain on the unichrome, i decided i needed to
move FB size selection into cmos, so i could test a size and then reset it
to the default after loading this value so that the next reboot uses the
(working) default again. This meant implementing set_option in parallel to
get_option.

get_option was then found to have inversed argument ordering (like outb) and
passing char * and then depending on the cmos layout length, which made me
feel quite uncomfortable. Since we either have reserved space (which we
shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go. So all users of
get_option now have their arguments inversed and switched from using ints
to unsigned ints now.

The way get_cmos_value was implemented forced us to not overlap byte and to
have multibyte values be byte aligned. This logic is now adapted to do a
full uint32_t read (when needed) at any offset and any length up to 32, and
the shifting all happens inside an uint32_t as well. set_cmos_value was
implemented similarly. Both routines have been extensively tested in a
quick separate little program as it is not easy to get this stuff right.

build_opt_tbl.c was altered to function correctly within these new
parameters. The enum value retrieval has been changed strol(..., NULL, 10)
to stroul(..., NULL, 0), so that we not only are able to use unsigned ints
now but so that we also interprete hex values correctly. The 32bit limit
gets imposed on all entries not marked reserved, an unused "user_data" field
that appeared in a lot of cmos.layouts has been changed to reserved as well.

Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4332 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-06-03 10:47:19 +00:00
Patrick Georgi 12aba82e55 Refactor copy_and_run so that it uses a single code base instead of
3 (with one of them way too much assembler code).

On the way, I had to make some changes to the way the code is built, 
which is an effort I want to expand over time.
Right now, large portions of the in-ROM part of coreboot is compiled as 
a single file, with lots of .c files including other .c files.
That has its justification for pre-raminit code, but it also affects 
lots of post-raminit code (memcpy doesn't really make sense before 
raminit, or at least CAR)

The coreboot_apc code (AMD boards) gained some .c includes because I 
don't know that part of the code enough to really rework it and only 
have limited possibilities to test it. The includes should give an 
identical situation for this part of the code.

This change was posted as set of 6 patches to the list, but they
were mostly split for review purposes, hence commit them all at once.
They can still be backed up using the patch files, if necessary.

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4233 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-30 07:07:22 +00:00
Stefan Reinauer 6f52d11e9e drop duplicate compiler options that are already mentioned in CFLAGS.
(scan-build chokes on this)

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4181 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-22 18:16:20 +00:00
Carl-Daniel Hailfinger b5e10bcf1f Thanks to Myles' patch adding support for include statements,
refactoring Config.lb became possible.

Factor out ROM size calculation from Config.lb.
  
This patch converts 87 boards (with and without USE_FAILOVER_IMAGE),
but it has to work around a parser bug. 

89 files changed, 209 insertions(+), 2415 deletions(-)
A total of 2206 removed lines.
  
Abuild works for all changed boards on khepri.

Myles writes:
I've tested serengeti for the failover portion and s2892 for the
nofailover portion.  ldoptions are exactly the same and they both boot
the same.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-21 00:16:06 +00:00
Peter Stuge 483b7bbd77 v2/src romfs->cbfs rename
This also has the config tool changes in v2/util.

Rename romfs.[ch]->cbfs.[ch] and sed romfs->cbfs romtool->cbfstool ROMFS->CBFS

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4113 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-14 07:40:01 +00:00
Carl-Daniel Hailfinger 6dcbe7f540 This patch cleans up the calls to $CC in mainboard Config.lb files. They
now all have the same parameter order.

action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS)
-I$(TOP)/src -I. -nostdinc -nostdlib -fno-builtin -Wall -Os -c -S
$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -o $@"

The idea behind this parameter order is:
- *FLAGS at the beginning.
- Use a common set of *FLAGS.
- Include files and directories listed afterwards.
- nostdinc, nostdlib, no-builtin tell the compiler this is standalone
  code.
- Warnings. They do not influence source or compilation.
- Compilation strategy (small) and output mode (asm or binary).
- File to be compiled.
- Output name.
- $(DEBUG_CFLAGS) and -S are only used for asm output.


Other changes in this patch:

- src/supermicro/h8dme/Config.lb now uses $DEBUG_CFLAGS instead of
hardcoding the respective flags.

- $DEBUG_CFLAGS was added to asm outputting $CC calls:
supermicro/h8dme/Config.lb
lippert/roadrunner-lx/Config.lb

- $DISTRO_CFLAGS was added to some $CC calls in:
iwill/dk8_htx/Config.lb (CAR AP code)
supermicro/h8dmr/Config.lb (CAR AP code)
supermicro/h8dme/Config.lb (CAR AP code)
gigabyte/m57sli/Config.lb (CAR AP code)
gigabyte/ga_2761gxdk/Config.lb (CAR AP code)
amd/serengeti_cheetah_fam10/Config.lb (everywhere)
msi/ms7135/Config.lb (everywhere)
nvidia/l1_2pvv/Config.lb (CAR AP code)
-$CFLAGS was added to all $CC calls in:
amd/db800/Config.lb
amd/dbm690t/Config.lb
amd/norwich/Config.lb
amd/pistachio/Config.lb
amd/serengeti_cheetah/Config.lb
amd/serengeti_cheetah_fam10/Config.lb
arima/hdama/Config.lb
artecgroup/dbe61/Config.lb
asus/a8n_e/Config.lb
asus/a8v-e_se/Config.lb
asus/m2v-mx_se/Config.lb
broadcom/blast/Config.lb
digitallogic/msm800sev/Config.lb
gigabyte/ga_2761gxdk/Config.lb
gigabyte/m57sli/Config.lb
ibm/e325/Config.lb
ibm/e326/Config.lb
iei/pcisa-lx-800-r10/Config.lb
iwill/dk8_htx/Config.lb
iwill/dk8s2/Config.lb
iwill/dk8x/Config.lb
kontron/986lcd-m/Config.lb
lippert/roadrunner-lx/Config.lb
lippert/spacerunner-lx/Config.lb
msi/ms7135/Config.lb
msi/ms7260/Config.lb
msi/ms9185/Config.lb
msi/ms9282/Config.lb
newisys/khepri/Config.lb
nvidia/l1_2pvv/Config.lb
pcengines/alix1c/Config.lb
sunw/ultra40/Config.lb
supermicro/h8dme/Config.lb
supermicro/h8dmr/Config.lb
technexion/tim8690/Config.lb
tyan/s2735/Config.lb
tyan/s2850/Config.lb
tyan/s2875/Config.lb
tyan/s2880/Config.lb
tyan/s2881/Config.lb
tyan/s2882/Config.lb
tyan/s2885/Config.lb
tyan/s2891/Config.lb
tyan/s2892/Config.lb
tyan/s2895/Config.lb
tyan/s2912/Config.lb
tyan/s2912_fam10/Config.lb
tyan/s4880/Config.lb
tyan/s4882/Config.lb

- Use $@ wherever appropriate.

- Kill that evil CACHE_AS_RAM_AUTO_C variable.

- Trailing whitespace fixups on lines which were touched anyway.

We now only have 6 remaining different calls to $CC whereas before there
were 20.
If I am allowed to rename src/mainboard/kontron/986lcd-m/auto.c to
src/mainboard/kontron/986lcd-m/cache_as_ram_auto.c, we're down to 4
different calls.
If we can decide on the use of $CPU_OPT, we are down to 3 different
calls.

One additional point I'd like to clear up:
if ASSEMBLER_DEBUG
makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm
end

"-dA -fverbose-asm" is only useful for asm output. For these flags,
DEBUG_CFLAGS is a total misnomer. What about calling them
DEBUG_ASMCFLAGS or somesuch?
"-g" should be controllable by a separate switch. It is useful even for
object code.


The following targets are broken by this patch because they contain
implicit declarations, but the error did not trigger due to missing
CFLAGS:
amd/serengeti_cheetah
asus/a8v-e_se
asus/m2v-mx_se
digitallogic/msm800sev
pcengines/alix1c
supermicro/h8dme
supermicro/h8dmr


Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-12 21:47:09 +00:00
Carl-Daniel Hailfinger 7b6ea25f21 Fix up the incomplete commit in r4055.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4058 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-03 16:40:44 +00:00
Carl-Daniel Hailfinger f7116c3bd0 There are more than a dozen targets in the v2 tree which refer to ROMCC
in their Config.lb but never use it. There's no point in keeping
dead code around.

This patch removes ROMCC remainders from Config.lb and kills orphaned
auto.c and failover.c in the affected mainboard directories.

arima/hdama
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms9282
newisys/khepri
sunw/ultra40
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882

Abuild log is completely identical with and without the patch.

With this patch, the last ROMCC remainders for K8 boards are gone.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4055 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-03 16:29:35 +00:00
Stefan Reinauer 3081bdfa44 Drop CONFIG_CHIP_NAME. Those config statements in Config.lb should
be used unconditionally, and the names don't hurt.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-04-01 13:43:21 +00:00
Ronald G. Minnich d469cdab93 Add the CONFIG_ROMS config variable.
Tested under abuild, causes no trouble. 

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>

Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4035 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-03-31 16:32:01 +00:00
Carl-Daniel Hailfinger 7ad11e8d33 Carl-Daniel's part:
This patch converts mainboard_$VENDOR_$BOARD_ops to mainboard_ops and 
mainboard_$VENDOR_$BOARD_config to mainboard_config.

Ron's part:
The config change that makes the naming change not break every build.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3954 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-02-18 20:41:57 +00:00
Stefan Reinauer ef6cb094b8 This patch makes the recently added assembler debug optional, as it may
cause problems with certain toolchains. This patch will also safe some hard
disk space for those of us working on laptops or netbooks with always too small
disks.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-01-20 20:13:01 +00:00
Carl-Daniel Hailfinger a5436c66bf Fix implicit declarations of get_bus_conf.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3835 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-22 17:41:01 +00:00
Carl-Daniel Hailfinger 93159bf752 In the process of trying to debug some HT sync problems I added lots of
debug code to src/northbridge/amd/amdk8/incoherent_ht.c.
However, printk is not available for all boards at that stage.

I have changed the following boards:
agami/aruma
arima/hdama
asus/a8n_e
broadcom/blast
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms7135
newisys/khepri
sunw/ultra40
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882

abuild works fine for all of them.
agami/aruma needs a Config-abuild.lb which doesn't have fallback and
normal due to size problems.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3829 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-12-22 09:53:24 +00:00
Stefan Reinauer 4ed326be5d This patch from Ralf Grosse Boerger makes debugging more comfortable.
With this patch it's possible to 

- determine the according source code line for each asm statement
  (objdump -dS)
- determine the source code file for each asm statement 
  (objdump -ddl)

This isn't exactly trivial because cache_as_ram_auto.c gets compiled to
assembly and converted by a perl script afterwards.

This patch solves the problem 
- by extending cache_as_ram_auto.inc with debug information and line
  numbers
- by correcting the perl calls (".text" --> "\.text")
- by creating a disassembly with source code and line numbers.
  (ctr0.disasm and
  coreboot.disasm)

There's one minor downside to the patch: A complete abuild run takes up
around 1.6G instead of about 700MB now. But I'm sure this is quite
reasonable for the benefits.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>

Please commit while this is being worked out.
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3778 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-11-28 12:09:17 +00:00
Carl-Daniel Hailfinger 2ee6779a64 The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots of
code to use it. That makes the code more readable and also less
error-prone.

Abuild tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3624 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-01 12:52:52 +00:00
Carl-Daniel Hailfinger 00809ebf02 This changes the python generated makefiles
targets/*/*/Makefile
        targets/*/*/normal/Makefile
        targets/*/*/fallback/Makefile

to use a common copy of romcc, and to leave this compiler untouched by
'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ .
'make clean' in targets/*/*/ will clean romcc.

Thanks to Mats for the initial idea and implementation of a tool to do
this. This patch has almost the same behaviour as the original tool
without having to run the tool each time.
Tested for abuild-friendliness.

The patch saves ~10-12 seconds for every target using romcc. For a full
abuild run, this is ~20% time saved.
For the first 38 abuild targets, total build time is down to 13m24s
instead of 16m22s on my machine.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-04 13:44:00 +00:00
Myles Watson 3d1d3b23f0 This is the sata irq patch for s2895 and ultra40. It also changes some broken
white space in the s2892 and s2891 mptable.c files.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3256 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-04-23 20:40:55 +00:00
Ronald G. Minnich 25a37449c5 This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLAGS were not being
included on the CC line for cache_as_ram_auto.c

Tested on ubuntu, where formerly it failed.

Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3079 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-26 16:57:03 +00:00
Stefan Reinauer f8ee1806ac Rename almost all occurences of LinuxBIOS to coreboot.
Due to the automatic nature of this update, I am self-acking. It worked in
abuild.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18 15:08:58 +00:00
Myles Watson 15674b78be This adds the same line (uses CONFIG_PRECOMPRESSED_PAYLOAD) to every
Options.lb file that already had a "uses CONFIG_COMPRESSED_PAYLOAD_LZMA"
line in it.

I figure that only adding it to the files that already have support
for LZMA payloads makes sure I don't break anything.

Signed-off-by: Myles Watson <myles@pel.cs.byu.edu>
Acked-by: Ward Vandewege <ward@gnu.org>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3002 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-09 17:18:29 +00:00
Ed Swierk be13dc72d9 Apply linuxbios-rename-other-payload-options.patch
(Patch 2, refs #14)

Signed-off-by: Ed Swierk <eswierk@arastra.com> 
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2529 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-15 12:56:28 +00:00
Ed Swierk 1a7a5b49c5 Apply linuxbios-rename-compressed-payload-options.patch, refs #14
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2527 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-15 11:42:16 +00:00
Stefan Reinauer ca6312010d * fix the automatic build system by compressing payloads if possible
and leaving enough room for a real payload (not /dev/null)

  This is a wonderful example why "uses" sucks.

* add Config-abuild.lb for those boards that dont build with 
  the default settings and a real payload:
  arima/hdama, amd/quartet, amd/serengeti_cheetah, ibm/e326

* if lzma is installed and a real payload is used, try compressing
  it. 

* fix a small bug in "abuild --help"

This patch is acked by me because its due to infrastructural changes only.
Flames welcome.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-10 13:30:28 +00:00
Uwe Hermann a7aa29b943 Use the canonical name of the vendors/devices and the
same format for all CHIP_NAME() entries in LinuxBIOS (Closes #20).

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@linuxbios.org>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2490 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-05 18:50:49 +00:00
Uwe Hermann 9c33b7b81e Remove some unneeded #includes from most mainboard.c files.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> 
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2485 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-02 14:11:34 +00:00
Uwe Hermann e0e1d42527 Fix the CHIP_NAME() entries of all mainboards to have the same format
and (hopefully) the correct canonical name of the vendor and board.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2476 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-27 11:30:27 +00:00
Ronald G. Minnich 4bb8887ac4 change things that make no sense on ultra40. serial output now works!
Signed-off-by: Ronald G. Minnich


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-13 19:58:52 +00:00
Yinghai Lu 7110f9261f K8_4RANK to QRANK
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-05 06:59:56 +00:00
Yinghai Lu d4b278c02c AMD Rev F support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-04 20:46:15 +00:00
Ronald G. Minnich 8a02b7d54e add smsc part. Mod sun board to use smsc part for now
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-17 20:31:09 +00:00
Ronald G. Minnich 08af3f535d mods for the ultra40 bringup. This now builds.
amd gx2 north -- don't set anything in the north, it conflicts with vsa
settings. So we have our own pci_set_resources that is essentially a
no-op -- just calls the kids. 

olpc rev_a config -- DISABLE the compressed rom stream. This SHOULD NOT
have been set -- it is untested and caused real trouble. 


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-09 02:21:49 +00:00
Ronald G. Minnich e53d03c211 fix up the links for the ultra 40 -- i/o on ht 1 on each cpu
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-08 21:42:18 +00:00
Ronald G. Minnich a758acab7f fix up config space.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-08 18:02:12 +00:00
Ronald G. Minnich 90e68aef68 initial work on sunw ultra40. It's wrong :-)
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-07 20:02:02 +00:00